arXiv subjects

Teresa Mineo

Publications and source records attributed to Teresa Mineo.

At least 19 recordsLinked to original sources

arXiv2025

Learning from ASTRI-Horn: products and applications of Variance data

In the context of the ASTRI MiniArray project (9 dual-mirror air Cherenkov telescopes being installed at the Observatorio del Teide in the Canary Islands), the ASTRI- Horn prototype was previously implemented in Italy (Sicily). It was a crucial test bench for establishing observation strategies, hardware upgrades, and software solutions. Specifically, during the winter 2022/2023 observing campaign, we implemented significant enhancements in using the so-called Variance mode, an auxiliary output of the ASTRI Cherenkov camera able to take images of the night sky background in the near UV/visible band. Variance data are now processed online and on site using a dedicated pipeline and stored in tech files. This data can infer possible telescope mis-pointing, background level, number of identified stars, and point spread function. In this contribution, we briefly present these quantities and their importance together with the algorithms adopted for their calculation. They provide valuable monitoring of telescope health and sky conditions during scientific data collection, enabling the selection of optimal time sequences for Cherenkov data reduction.

astro-ph.IM↗

arXiv2025

Unveiling the origin of XMM-Newton soft proton flares: I. Design and validation of a response matrix for proton spectral analysis

Low-energy (<300 keV) protons entering the field of view of XMM-Newton are observed in the form of a sudden increase in the background level, the so-called soft proton flares, affecting up to 40% of the mission observing time. In-flight XMM-Newton's observations of soft protons represent a unique laboratory to validate and improve our understanding of their interaction with the mirror, optical filters, and X-ray instruments. At the same time, such models would link the observed background flares to the primary proton population encountered by the telescope, converting XMM-Newton into a monitor for soft protons. We built a Geant4 simulation of XMM-Newton, including a verified mass model of the X-ray mirror, the focal plane assembly, and the EPIC MOS and pn-CCDs. We encoded the energy redistribution and proton transmission efficiency into a redistribution matrix file (RMF) and an auxiliary response file (ARF). For the validation, three averaged soft proton spectra, one for each filter configuration, were extracted from a collection of 13 years of MOS observations of the focused non X-ray background and analysed with Xspec. The best-fit model is in agreement with the power-law distribution predicted from independent measurements for the XMM-Newton orbit, spent mostly in the magnetosheath and nearby regions. For the first time we are able to link detected soft proton flares with the proton radiation environment in the Earth's magnetosphere, while proving the validity of the simulation chain in predicting the background of future missions. Benefiting from this work and contributions from the Athena instrument consortia, we also present the response files for the Athena mission and updated estimates for its focused charged background.

astro-ph.IM↗

arXiv2022

Geant4 simulation of the residual background in the ATHENA Wide Field Imager from protons deflected by the Charged Particle Diverter

X-ray telescopes opened up a new window into the high-energy universe. However, the last generation of these telescopes encountered an unexpected problem: their optics focused not only X-rays but low-energy (so called soft) protons as well. These protons are very hard to model and can not be distinguished from X-rays. For example, 40\% of XMM-Newton observations is significantly contaminated by soft proton induced background flares. In order to minimize the background from such low-energy protons the Advanced Telescope for High ENergy Astrophysics (ATHENA) satellite introduced a novel concept, the so called Charged Particle Diverter (CPD). It is an array of magnets in a Hallbach design, which deflects protons below 76 keV before they would hit the Wide Field Imager (WFI) detector. In this work, we investigate the effect of scattering of the deflected protons with the CPD walls and the inner surfaces of the WFI detector assembly. Such scattered protons can loose energy, change direction and still hit the WFI. In order to adopt the most realistic instrument model, we imported the CAD model of both the CPD and the WFI focal plane assembly. Soft protons corresponding to $\approx$2.5 hours of exposure to the L1 solar wind are simulated in this work. The inhomogeneous magnetic field of the CPD is included in the simulation. We present a preliminary estimate of the WFI residual background induced by soft proton secondary scattering, in the case of the optical blocking filter present in the field of view. A first investigation of the volumes responsible for scattering the protons back into the field of view is reported.

astro-ph.IM↗

arXiv2022

Athena charged particle diverter simulations: effects of micro-roughness on proton scattering using Geant4

The last generation of X-ray focusing telescopes operating outside the Earth's radiation belt discovered that optics were able to focus not only astrophysical X-ray photons, but also low-energy heliophysical protons entering the Field of View (FOV). This "soft proton" contamination affects around 40\% of the observation time of XMM-Newton. The ATHENA Charged Particle Diverter (CPD) was designed to use magnetic fields to move these soft protons away from the FOV of the detectors, separating the background-contributing ions in the focused beam from the photons of interest. These magnetically deflected protons can hit other parts of the payload and scatter back to the focal plane instruments. Evaluating the impact of this secondary scattering with accurate simulations is essential for the CPD scientific assessment. However, while Geant4 simulations of grazing soft proton scattering on X-ray mirrors have been recently validated, the scattering on the unpolished surfaces of the payload (e.g. the baffle or the diverter itself) is still to be verified with experimental results. Moreover, the roughness structure can affect the energy and angle of the scattered protons, with a scattering efficiency depending on the specific target volume. Using Atomic Force Microscopy to take nanometer-scale surface roughness measurements from different materials and coating samples, we use Geant4 together with the CADMesh library to shoot protons at these very detailed surface roughness models to understand the effects of different material surface roughnesses, coatings, and compositions on proton energy deposition and scattering angles. We compare and validate the simulation results with laboratory experiments, and propose a framework for future proton scattering experiments.

astro-ph.IM↗

arXiv2021

Effective pointing of the ASTRI-Horn telescope using the Cherenkov camera with the Variance method

Cherenkov telescope cameras are not suitable to perform astrometrical pointing calibration since they are not designed to produce images of the sky, but rather to detect nanosecond atmospheric flashes due to very high-energy cosmic radiation. Indeed, these instruments show only a moderate angular resolution (fractions of degrees) and are almost blind to the steady or slow-varying optical signal of starlight. For this reason, auxiliary optical instruments are typically adopted to calibrate the telescope pointing. However, secondary instruments are possible sources of systematic errors. Furthermore, the Cherenkov camera is the only one framing exactly the portion of the sky under study, and hence its exploitation for pointing calibration purposes would be desirable. In this contribution, we present a procedure to assess the pointing accuracy of the ASTRI-Horn telescope by means of its innovative Cherenkov camera. This instrument is endowed with a statistical method, the so-called Variance method, implemented in the logic board and able to provide images of the night sky background light as ancillary output. Taking into account the convolution between the optical point spread function and the pixel distribution, Variance images can be used to evaluate the position of stars with sub-pixel precision. In addition, the rotation of the field of view during observations can be exploited to verify the alignment of the Cherenkov camera with the optical axis of the telescope, with a precision of a few arcminutes, as upper limit. This information is essential to evaluate the effective pointing of the telescope, enhancing the scientific accuracy of the system.

astro-ph.IM↗

arXiv2020

Use of the Peak-Detector mode for gain calibration of SiPM sensors with ASIC CITIROC read-out

The Cherenkov Imaging Telescope Integrated Read Out Chip (CITIROC) is a 32-channel fully analogue front-end ASIC dedicated to the read-out of silicon photo-multiplier (SiPM) sensors that can be used in a variety of experiments with different applications: nuclear physics, medical imaging, astrophysics, etc. It has been adopted as front-end for the focal plane detectors of the ASTRI-Horn Cherenkov telescope and, in this context, it was modified implementing the peak detector reading mode to satisfy the instrument requirements. For each channel, two parallel AC coupled voltage preamplifiers, one for the high gain and one for the low gain, ensure the read-out of the charge from 160 fC to 320 pC (i.e. from 1 to 2000 photo-electrons with SiPM gain = 10$^{6}$, with a photo-electron to noise ratio of 10). The signal in each of the two preamplifier chains is shaped and the maximum value is captured by activating the peak detector for an adjustable time interval. In this work, we illustrate the peak detector operation mode and, in particular, how this can be used to calibrate the SiPM gain without the need of external light sources. To demonstrate the validity of the method, we also present and discuss some laboratory measurements.

physics.ins-det↗

arXiv2019

Using Muon Rings for the Optical Throughput Calibration of the Cherenkov Telescope Array

Muon ring images observed with Imaging Atmospheric Cherenkov Telescopes (IACTs) provide a powerful means to calibrate the optical throughput of IACTs and monitor their optical point spread function. We investigate whether muons ring images can be used as the primary optical throughput calibration method for the telescopes of the future Cherenkov Telescope Array (CTA) and find several additional systematic effects in comparison to previous works. To ensure that the method achieves the accuracy required by CTA, these systematic effects need to be taken into account and minor modifications to the hardware and analysis are necessary. We derive analytic estimates for the expected muon data rates to be used for optical throughput calibration, monitoring of the optical point spread function, with achievable statistical and systematic uncertainties, and explore the potential of muon ring images as a secondary method of camera pixel flat-fielding.

astro-ph.IM↗

arXiv2019

Using Muon Rings for the Calibration of the Cherenkov Telescope Array: A Systematic Review of the Method and its Potential Accuracy

The analysis of ring images produced by muons in an Imaging Atmospheric Cherenkov Telescope (IACT) provides a powerful and precise method to calibrate the IACT optical throughput and monitor its optical point-spread function (PSF). First proposed by the Whipple collaboration in the early 90's, this method has been refined by the so-called second generation of IACT experiments: H.E.S.S., MAGIC and VERITAS. We review here the progress made with these instruments and investigate the applicability of the method as the primary throughput calibration method for the different telescope types forming the future Cherenkov Telescope Array (CTA). We find several additional systematic effects not yet taken into account by previous authors and propose several new analytical methods to include these in the analysis. Slight modifications in hardware and analysis need to be made to ensure that such a calibration works as accurately as required for the CTA. We derive analytic estimates for the expected muon data rates for optical throughput calibration, camera pixel flat-fielding and monitoring of the optical PSF. The achievable statistical and systematic uncertainties of the method are also assessed.

astro-ph.IM↗

arXiv2018

Magnetic shielding of soft protons in future X-ray telescopes: the case of the ATHENA Wide Field Imager

Both the interplanetary space and the Earth magnetosphere are populated by low energy ($\leq300$ keV) protons that are potentially able to scatter on the reflecting surface of Wolter-I optics of X-ray focusing telescopes and reach the focal plane. This phenomenon, depending on the X-ray instrumentation, can dramatically increase the background level, reducing the sensitivity or, in the most extreme cases, compromising the observation itself. The use of a magnetic diverter, deflecting protons away from the field of view, requires a detailed characterization of their angular and energy distribution when exiting the mirror. We present the first end-to-end Geant4 simulation of proton scattering by X-ray optics and the consequent interaction with the diverter field and the X-ray detector assembly, selecting the ATHENA Wide Field Imager as a case study for the evaluation of the residual soft proton induced background. We obtain that, in absence of a magnetic diverter, protons are indeed funneled towards the focal plane, with a focused Non X-ray Background well above the level required by ATHENA science objectives ($5\times10^{-4}$ counts cm$^{-2}$ s$^{-1}$ keV$^{-1}$), for all the plasma regimes encountered in both L1 and L2 orbits. These results set the proton diverter as a mandatory shielding system on board the ATHENA mission and all high throughput X-ray telescopes operating in the interplanetary space. For a magnetic field computed to deflect 99\% of the protons that would otherwise reach the WFI, Geant4 simulations show that this configuration, in the assumption of a uniform field, would efficiently shield the focal plane, yielding a residual background level of the order or below the requirement.

astro-ph.IM↗

arXiv2018

The Geant4 mass model of the ATHENA Silicon Pore Optics and its effect on soft proton scattering

Given the unprecedented effective area, the new ATHENA Silicon Pore Optics (SPO) focusing technology, the dynamic and variable L2 environment, where no X-ray mission has flown up to date, a dedicated Geant4 simulation campaign is needed to evaluate the impact of low energy protons scattering on the ATHENA mirror surface and the induced residual background level on its X-ray detectors. The Geant4 mass model is built as part of the ESA AREMBES project activities using the BoGEMMS framework. An SPO mirror module row is the atomic unit of the mass model, allowing the simulation of the full structure by means of 20 independent runs, one for each row. Thanks to the BoGEMMS configuration files, both single pores, mirror modules or the entire SPO row can be built with the same Geant4 geometry. Both Remizovich, in its elastic approximation, and Coulomb single scattering Geant4 models are used in the interaction of mono-energetic proton beams with a single SPO pore. The scattering efficiency for the first model is almost twice the efficiency obtained with the latter but for both cases we obtain similar polar and azimuthal angular distributions, with about 70-75% of scatterings generated by single or double reflections. The soft proton flux modelled for the plasma sheet region is used as input for the simulation of soft proton funnelling by the full SPO mass model. A much weaker soft proton vignetting than the one observed by XMM-Newton EPIC detectors is generated by ATHENA mirrors. The residual soft proton flux reaching the focal plane, defined as a 15 cm radius, is 10^4 times lower than the input L2 soft proton population entering the mirror, at the same energy, with rates comparable or higher than the ones observed in XMM EPIC-pn most intense soft proton flares.

astro-ph.IM↗

arXiv2017

Geant4 simulations of soft proton scattering in X-ray optics. A tentative validation using laboratory measurements

Low energy protons (< 300 keV) can enter the field of view of X-ray space telescopes, scatter at small incident angles, and deposit energy on the detector, causing intense background flares at the focal plane or in the most extreme cases, damaging the X-ray detector. A correct modelization of the physics process responsible for the grazing angle scattering processes is mandatory to evaluate the impact of such events on the performance of future X-ray telescopes as the ESA ATHENA mission. For the first time the Remizovich model, in the approximation of no energy losses, is implemented top of the Geant4 release 10.2. Both the new scattering physics and the built-in Coulomb scattering are used to reproduce the latest experimental results on grazing angle proton scattering. At 250 keV multiple scattering delivers large proton angles and it is not consistent with the observation. Among the tested models, the single scattering seems to better reproduce the scattering efficiency at the three energies but energy loss obtained at small scattering angles is significantly lower than the experimental values. In general, the energy losses obtained in the experiment are higher than what obtained by the simulation. The experimental data are not completely representative of the soft proton scattering experienced by current X-ray telescopes because of the lack of measurements at low energies (< 200 keV) and small reflection angles, so we are not able to address any of the tested models as the one that can certainly reproduce the scattering behavior of low energy protons expected for the ATHENA mission. We can, however, discard multiple scattering as the model able to reproduce soft proton funneling, and affirm that Coulomb single scattering can represent, until further measurements, the best approximation of the proton scattered angular distribution at the exit of X-ray optics.

astro-ph.IM↗

arXiv2017

The particle background of the X-IFU instrument

In this paper we are going to review the latest estimates for the particle background expected on the X-IFU instrument onboard of the ATHENA mission. The particle background is induced by two different particle populations: the so called "soft protons" and the Cosmic rays. The first component is composed of low energy particles (< 100s keV) that get funnelled by the mirrors towards the focal plane, losing part of their energy inside the filters and inducing background counts inside the instrument sensitivity band. The latter component is induced by high energy particles (> 100 MeV) that possess enough energy to cross the spacecraft and reach the detector from any direction, depositing a small fraction of their energy inside the instrument. Both these components are estimated using Monte Carlo simulations and the latest results are presented here.

astro-ph.IM↗

arXiv2017

Updates on the background estimates for the X-IFU instrument onboard of the ATHENA mission

ATHENA, with a launch foreseen in 2028 towards the L2 orbit, addresses the science theme "The Hot and Energetic Universe", coupling a high-performance X-ray Telescope with two complementary focal-plane instruments. One of these, the X-ray Integral Field Unit (X-IFU) is a TES based kilo-pixel array providing spatially resolved high-resolution spectroscopy (2.5 eV at 6 keV) over a 5 arcmin FoV. The background for this kind of detectors accounts for several components: the diffuse Cosmic X-ray Background, the low energy particles (<~100 keV) focalized by the mirrors and reaching the detector from inside the field of view, and the high energy particles (>~100 MeV) crossing the spacecraft and reaching the focal plane from every direction. Each one of these components is under study to reduce their impact on the instrumental performances. This task is particularly challenging, given the lack of data on the background of X-ray detectors in L2, the uncertainties on the particle environment to be expected in such orbit, and the reliability of the models used in the Monte Carlo background computations. As a consequence, the activities addressed by the group range from the reanalysis of the data of previous missions like XMM-Newton, to the characterization of the L2 environment by data analysis of the particle monitors onboard of satellites present in the Earth magnetotail, to the characterization of solar events and their occurrence, and to the validation of the physical models involved in the Monte Carlo simulations. All these activities will allow to develop a set of reliable simulations to predict, analyze and find effective solutions to reduce the particle background experienced by the X-IFU, ultimately satisfying the scientific requirement that enables the science of ATHENA. While the activities are still ongoing, we present here some preliminary results already obtained by the group.

astro-ph.IM↗

arXiv2015

Volcanoes muon imaging using Cherenkov telescopes

A detailed understanding of a volcano inner structure is one of the key-points for the volcanic hazards evaluation. To this aim, in the last decade, geophysical radiography techniques using cosmic muon particles have been proposed. By measuring the differential attenuation of the muon flux as a function of the amount of rock crossed along different directions, it is possible to determine the density distribution of the interior of a volcano. Up to now, a number of experiments have been based on the detection of the muon tracks crossing hodoscopes, made up of scintillators or nuclear emulsion planes. Using telescopes based on the atmospheric Cherenkov imaging technique, we propose a new approach to study the interior of volcanoes detecting the Cherenkov light produced by relativistic cosmic-ray muons that survive after crossing the volcano. The Cherenkov light produced along the muon path is imaged as a typical annular pattern containing all the essential information to reconstruct particle direction and energy. Our new approach offers the advantage of a negligible background and an improved spatial resolution. To test the feasibility of our new method, we have carried out simulations with a toy-model based on the geometrical parameters of ASTRI SST-2M, i.e. the imaging atmospheric Cherenkov telescope currently under installation onto the Etna volcano. Comparing the results of our simulations with previous experiments based on particle detectors, we gain at least a factor of 10 in sensitivity. The result of this study shows that we resolve an empty cylinder with a radius of about 100 m located inside a volcano in less than 4 days, which implies a limit on the magma velocity of 5 m/h.

physics.ins-det↗

arXiv2013

XIPE: the X-ray Imaging Polarimetry Explorer

X-ray polarimetry, sometimes alone, and sometimes coupled to spectral and temporal variability measurements and to imaging, allows a wealth of physical phenomena in astrophysics to be studied. X-ray polarimetry investigates the acceleration process, for example, including those typical of magnetic reconnection in solar flares, but also emission in the strong magnetic fields of neutron stars and white dwarfs. It detects scattering in asymmetric structures such as accretion disks and columns, and in the so-called molecular torus and ionization cones. In addition, it allows fundamental physics in regimes of gravity and of magnetic field intensity not accessible to experiments on the Earth to be probed. Finally, models that describe fundamental interactions (e.g. quantum gravity and the extension of the Standard Model) can be tested. We describe in this paper the X-ray Imaging Polarimetry Explorer (XIPE), proposed in June 2012 to the first ESA call for a small mission with a launch in 2017 but not selected. XIPE is composed of two out of the three existing JET-X telescopes with two Gas Pixel Detectors (GPD) filled with a He-DME mixture at their focus and two additional GPDs filled with pressurized Ar-DME facing the sun. The Minimum Detectable Polarization is 14 % at 1 mCrab in 10E5 s (2-10 keV) and 0.6 % for an X10 class flare. The Half Energy Width, measured at PANTER X-ray test facility (MPE, Germany) with JET-X optics is 24 arcsec. XIPE takes advantage of a low-earth equatorial orbit with Malindi as down-link station and of a Mission Operation Center (MOC) at INPE (Brazil).

astro-ph.HE↗

arXiv2013

The ASTRI SST-2M Prototype: Camera and Electronics

ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. The primary goal of the ASTRI project is the realization of an end-to-end prototype of a Small Size Telescope for the Cherenkov Telescope Array. The prototype, named ASTRI SST-2M, is based on a completely new double mirror optics design and will be equipped with a camera made of a matrix of SiPM detectors. Here we describe the ASTRI SST-2M camera concept: basic idea, detectors, electronics, current status and some results coming from experiments in lab.

astro-ph.IM↗

arXiv2013

Calibration of the ASTRI SST-2M Prototype using Muon Ring Images

The study of ring images generated from high-energy muons is a very useful tool for the performance monitoring and calibration of any Imaging Atmosphere Cherenkov Telescope. Isolated muons travelling towards the telescope light collector system produce characteristic Cherenkov ring images in the focal plane camera. Since the geometry and the distribution of light deployed onto the camera can be easily reconstructed analytically for a muon of given energy and direction, muon rings are a powerful tool for monitoring the behaviour of crucial properties of an imaging telescope such as the point-spread-function and the overall light collection efficiency. In this contribution we present the possibility of using the analysis of muon ring images as calibrator for the ASTRI SST-2M prototype point spread function.

astro-ph.IM↗

arXiv2009

Study of the accreting pulsar 4U 0115+634 with a bulk and thermal Comptonization model

Highly magnetized pulsars accreting matter in a binary system are bright sources in the X-ray band (0.1-100 keV). Despite the early comprehension of the basic emission mechanism, their spectral energy distribution is generally described by phenomenological or simplified models. We propose a study of the spectral emission from the high mass X-ray binary pulsar 4U 0115+634 by means of thermal and bulk Comptonization models based on the physical properties of such objects. For this purpose, we analyze the BeppoSAX data in the energy range 0.7-100 keV of the 1999 giant outburst, 12 days after the maximum. We model the spectral energy distribution of the system using a two-component continuum. At higher energy, above ~7 keV, the emission is due to thermal and bulk Comptonization of the seed photons produced by cyclotron cooling of the accretion column, and at lower energy, the emission is due to thermal Comptonization of a blackbody source in a diffuse halo close to the stellar surface. From the best fit parameters, we argue that the cyclotron emission is produced ~1.7 km above the stellar surface, and escapes from the column near its base, where the absorption features are generated by the interaction with the magnetic field in a surrounding halo. We find that in 4U 0115+634, the observed spectrum is dominated by reprocessed cyclotron radiation, whereas in other bright sources with stronger magnetic fields such as Her X-1, the spectrum is dominated by reprocessed bremsstrahlung.

astro-ph.HE↗