arXiv subjects

Tetsufumi Tanamoto

Publications and source records attributed to Tetsufumi Tanamoto.

At least 19 recordsLinked to original sources

arXiv2025

Device/circuit simulations of silicon spin qubits based on a gate-all-around transistor

We theoretically investigated the readout process of a spin--qubit structure based on a gate-all-around (GAA) transistor. Our study focuses on a logical qubit composed of two physical qubits. Different spin configurations result in different charge distributions, which subsequently influence the electrostatic effects on the GAA transistor. Consequently, the current flowing through the GAA transistor depends on the qubit's state. We calculated the current-voltage characteristics of the three-dimensional configurations of the qubit and GAA structures, using technology computer-aided design (TCAD) simulations. Moreover, we performed circuit simulations using the Simulation Program with Integrated Circuit Emphasis (SPICE) to investigate whether a readout circuit made from complementary metal--oxide semiconductor (CMOS) transistors can amplify the weak signals generated by the qubits. Our findings indicate that, by dynamically controlling the applied voltage within a properly designed circuit, the readout can be detected effectively based on a conventional sense amplifier.

cond-mat.mes-hall↗

arXiv2025

Circuit simulation of readout process toward large-scale superconducting quantum circuits

The rapid scaling of superconducting quantum computers has highlighted the impact of device-level variability on overall circuit fidelity. In particular, fabrication-induced fluctuations in device parameters such as capacitance and Josephson critical current pose significant challenges to large-scale integration. We propose a simulation methodology for estimating qubit fidelity based on classical circuit simulation, using a conventional Simulation Program with Integrated Circuit Emphasis (SPICE) simulator. This approach enables the evaluation of the performance of superconducting quantum circuits with 10000 qubits on standard laptop computers. The proposed method provides an accessible tool for the early stage assessment of large-scale superconducting quantum circuit performance.

quant-ph↗

arXiv2025

Effects of dissipation in reservoir computing using a spin qubit array

Reservoir computing (RC) is one of the hottest research topic as an application of many physical devices because the device characteristics can be used directly in computing sequences. Quantum RC is also a promising candidate for application in small-number qubit systems. Here, we propose a quantum RC based on the spin qubit system that reflects the status of the spin qubits in experiments comprising a one-dimensional qubit array. Spin qubits are coupled via the Heisenberg interaction, and data sequences are inputted to one of the spin qubits via pulsed rotations. By introducing dissipation, we obtained a relatively good performance in the quantum RC.

quant-ph↗

arXiv2025

Effects of valley splitting on resonant-tunneling readout of spin qubits

The effect of valley splitting on the readout of qubit states is theoretically investigated in a three-quantum-dot (QD) system. A single unit of the three-QD system consists of qubit-QDs and a channel-QD that is connected to a conventional transistor. The nonlinear source--drain current characteristics under resonant-tunneling effects are used to distinguish different qubit states. Using nonequilibrium Green functions, the current formula for the three-QD system is derived when each QD has two valley energy levels. Two valley states in each QD are considered to be affected by variations in the fabrication process. We found that when valley splitting is smaller than Zeeman splitting, the current nonlinearity can improve the readout, provided that the nonuniformity of the valley energy levels is small. Conversely, when the valley splitting is larger than the Zeeman splitting, the nonuniformity degraded the readout. In both cases, we showed that there are regions where the measurement time $t_{\rm meas}$ is much less than the decoherence time $t_{\rm dec}$ such that $t_{\rm dec}/t_{\rm meas}>100$. This suggests that less than 1\% measurement error is anticipated, which opens up the possibility for implementing surface codes even in the presence of valley splitting.

cond-mat.mes-hall↗

arXiv2023

Readout using Resonant Tunneling in Silicon Spin Qubits

Spin qubit systems are one of the promising candidates for quantum computing. The quantum dot (QD) arrays are intensively investigated by many researchers. Because the energy-difference between the up-spin and down-spin states is very small, the detection of the qubit state is of prime importance in this field. Moreover, many wires are required to control qubit systems. Therefore, the integration of qubits and wires is also an important issue. In this study, the measurement process of QD arrays is theoretically investigated using resonant tunneling, controlled by a conventional transistor. It is shown that the number of possible measurements during coherence time can exceed a hundred under the backaction of the measurements owing to the nonlinear characteristics of resonant tunneling. It is also discussed to read out the measurement results by the conventional transistor.

quant-ph↗

arXiv2022

Five and three quantum dot systems as apparatuses for measuring energy-levels

A quantum dot (QD) system provides various quantum physics of nanostructures. So far, many types of semiconductor QD structures have been fabricated and investigated experimentally and analyzed theoretically. Presently, QD systems have attracted considerable attention as units for the qubit system of quantum computers. Therefore, it is vital to integrate QD systems as measurement devices in addition to qubits. Here, we theoretically investigate the side-QD system as a measurement apparatus for energy-levels of the target QDs. We formulate the transport properties of both three and five QDs based on the Green functions method. The effects of the energy-difference of two side-QDs on the measurement current are calculated. The trade-off between the strength of the measurement and the back-action induced by the measurement is discussed. It is found that the medium coupling strength is appropriate for reading out the difference of the two energy-levels.

cond-mat.mes-hall↗

arXiv2021

Simulations of hybrid charge-sensing single-electron-transistors and CMOS circuits

Single-electron transistors (SETs) have been extensively used as charge sensors in many areas such as quantum computations. In general, the signals of SETs are smaller than those of complementary metal-oxide semiconductor (CMOS) devices, and many amplifying circuits are required to enlarge these signals. Instead of amplifying a single small output, we theoretically consider the amplification of pairs of SETs, such that one of the SETs is used as a reference. We simulate the two-stage amplification process of SETs and CMOS devices using a conventional SPICE (Simulation Program with Integrated Circuit Emphasis) circuit simulator. Implementing the pairs of SETs into CMOS circuits makes the integration of SETs more feasible because of direct signal transfer from the SET to the CMOS circuits.

cond-mat.mes-hall↗

arXiv2020

Compact spin qubits using the common gate structure of fin field-effect transistors

The sizes of commercial transistors are of nanometer order, and there have already been many proposals of spin qubits using conventional complementary metal oxide semiconductor (CMOS) transistors. However, the previously proposed spin qubits require many wires to control a small number of qubits. This causes a significant 'jungle of wires' problem when the qubits are integrated into a chip. Herein, to reduce the complicated wiring, we theoretically consider spin qubits embedded into fin field-effect transistor (FinFET) devices such that the spin qubits share the common gate electrode of the FinFET. The interactions between qubits occur via the Ruderman Kittel Kasuya Yosida (RKKY) interaction via the channel of the FinFET. The compensation for the compact implementation requires high-density current lines in a small space. The possibility of a quantum annealing machine is discussed in addition to the quantum computers of the current proposals.

quant-ph↗

arXiv2020

Generation of all-to-all connections in a two-dimensional qubit array with two-body interactions

All-to-all connections are required in general quantum annealing machines to solve various combinatorial optimization problems. The Lechner, Hauke, and Zoller (LHZ) method, which is used to realize the all-to-all connections, requires many-body interactions in locally connected qubits. Because most of the qubit interactions are two-body interactions, Lechner also proposed the construction of each four-body interaction by six controlled-NOT (CNOT) gates between two qubits. However, it is difficult to construct many CNOT gates. Herein, we show more concrete sequences to produce four-body and three-body interactions based on a two-dimensional solid-state qubit system. We show that the number of operations needed to construct the many-body interactions can be reduced using appropriate pulse sequences. These findings will help reduce quantum computation costs for solving combinatorial problems.

quant-ph↗

arXiv2019

Robustness of cluster states and surface code states against random local fields

In ideal quantum circuits, qubits are tacitly assumed to be uniformly fabricated and operated by prescribed signals. In reality, however, we must cope with different control signals to adjust individual qubits, which requires a large overhead of control circuits. Here, we theoretically investigate how random local fields affect cluster states and surface code states which constitute the key highly entangled states in quantum computation. We find similar behavior of temporal degradation of the fidelity for both cluster states and surface code states for the number of qubits up to ten. We find that the effect of local field fluctuations is greatly mitigated if the magnitude of fluctuations can be suppressed below 10 % of the energy gap $Δ$ for both cluster states and surface code states. If the magnitude of fluctuations exceeds $Δ/2$, the fidelity for both states deteriorates dramatically. A simple estimation based on the average fidelity up to $t\sim 2\hbar/Δ$ shows that the maximum number of qubits that can be corrected with the 1 % error threshold is less than 31 for surface code states and 27 for cluster states. This means that the error correction should be carried out during a time shorter than $2\hbar/Δ$.

quant-ph↗

arXiv2019

Reservoir Computing on Spin-Torque Oscillator Array

We numerically study reservoir computing on a spin-torque oscillator (STO) array, describing the magnetization dynamics of the STO array by a nonlinear oscillator model. The STOs exhibit synchronized oscillation due to coupling by magnetic dipolar fields. We show that reservoir computing can be performed using the synchronized oscillation state. The performance can be improved by increasing the number of STOs. The performance becomes highest at the boundary between the synchronized and disordered states. Using an STO array, we can achieve higher performance than that of an echo-state network with similar number of units. This result indicates that STO arrays are promising for hardware implementation of reservoir computing.

cond-mat.mes-hall↗

arXiv2018

Quantum Annealing Machines Based on Semiconductor Nanostructures

The development of quantum annealing machines (QAMs) based on superconducting qubits has progressed greatly in recent years and these machines are now widely used in both academia and commerce. On the other hand, QAMs based on semiconductor nanostructures such as quantum dots (QDs) appear to be still at the initial elementary research stage because of difficulty in controlling the interaction between qubits. In this paper, we review a QAM based on a semiconductor nanostructures such as floating gates (FGs) or QDs from the viewpoint of the integration of qubits. We theoretically propose the use of conventional high-density memories such as NAND flash memories for the QAM rather than the construction of a semiconductor qubit system from scratch. A large qubit system will be obtainable as a natural extension of the miniaturization of commercial-grade electronics, although further effort will likely be required to achieve high-quality qubits.

quant-ph↗

arXiv2017

SPICE Simulation of tunnel FET aiming at 32 kHz crystal-oscillator operation

We numerically investigate the possibility of using Tunnel field-effect transistor (TFET) in a 32 kHz crystal oscillator circuit to reduce power consumption. A simulation using SPICE (Simulation Program with Integrated Circuit Emphasis) is carried out based on a conventional CMOS transistor model. It is shown that the power consumption of TFET is one-tenth that of conventional low-power CMOS.

physics.app-ph↗

arXiv2017

Hole spin resonance and spin-orbit coupling in a silicon metal-oxide-semiconductor field-effect transistor

We study hole spin resonance in a p-channel silicon metal-oxide-semiconductor field-effect transistor. In the sub-threshold region, the measured source-drain current reveals a double dot in the channel. The observed spin resonance spectra agree with a model of strongly coupled two-spin states in the presence of a spin-orbit-induced anti-crossing. Detailed spectroscopy at the anti-crossing shows a suppressed spin resonance signal due to spin-orbit-induced quantum state mixing. This suppression is also observed for multi-photon spin resonances. Our experimental observations agree with theoretical calculations.

cond-mat.mes-hall↗

arXiv2017

Work-sharing of qubits in topological error corrections

Topological error-correcting codes, such as surface codes and color codes, are promising because quantum operations are realized by two-dimensionally (2D) arrayed quantum bits (qubits). However, physical wiring of electrodes to qubits is complicated, and 3D integration for the wiring requires further development of fabrication technologies. Here, we propose a method to reduce the congestion of wiring to qubits by just adding a SWAP gate after each controlled-NOT (CNOT) gate. SWAP gates exchange roles of qubits. Then, the roles of qubits are shared between different qubits. We found that our method transforms the qubit layout and reduces the number of qubits that cannot be accessed two-dimensionally. We show that fully 2D layouts including both qubits and control electrodes can be achieved for surface and color codes of minimum sizes. This method will be beneficial to simplifications of fabrication process of quantum circuits in addition to improvements of reliability of qubit system.

quant-ph↗

arXiv2017

Physically unclonable function using initial waveform of ring oscillators on 65 nm CMOS technology

A silicon physically unclonable function (PUF) using ring oscillators (ROs) has the advantage of easy application in both an application specific integrated circuit (ASIC) and a field-programmable gate array (FPGA). Here, we provide a RO-PUF using the initial waveform of the ROs based on 65 nm CMOS technology. Compared with the conventional RO-PUF, the number of ROs is greatly reduced and the time needed to generate an ID is within a couple of system clocks.

cs.CR↗

arXiv2016

High-Speed Magnetoresistive Random-Access Memory Random Number Generator Using Error-Correcting Code

A high-speed random number generator (RNG) circuit based on magnetoresistive random-access memory (MRAM) using an error-correcting code (ECC) post processing circuit is presented. ECC post processing increases the quality of randomness by increasing the entropy of random number. { We experimentally show that a small error-correcting capability circuit is sufficient for this post processing. It is shown that the ECC post processing circuit powerfully improves the quality of randomness with minimum overhead, ending up with high-speed random number generation. We also show that coupling with a linear feedback shift resistor is effective for improving randomness

cs.CR↗

arXiv2016

Physically Unclonable Function using Initial Waveform of Ring Oscillators

A silicon physically unclonable function (PUF) is considered to be one of the key security system solutions for local devices in an era in which the internet is pervasive. Among many proposals, a PUF using ring oscillators (RO-PUF) has the advantage of easy application to FPGA. In the conventional RO-PUF, frequency difference between two ROs is used as one bit of ID. Thus, in order to obtain an ID of long bit length, the corresponding number of RO pairs are required and consequently power consumption is large, leading to difficulty in implementing RO-PUF in local devices. Here, we provide a RO-PUF using the initial waveform of the ROs. Because a waveform constitutes a part of the ID, the number of ROs is greatly reduced and the time needed to generate the ID is finished in a couple of system clocks. We also propose a solution to a change of PUF performance attributable to temperature or voltage change.

cs.CR↗