arXiv subjects

Tevfik Onur Mentes

Publications and source records attributed to Tevfik Onur Mentes.

6 recordsLinked to original sources

arXiv2025

Rubidium intercalation in epitaxial monolayer graphene

Alkali metal intercalation of graphene layers has been of particular interest due to potential applications in electronics, energy storage, and catalysis. Rubidium (Rb) is one of the largest alkali metals and the one less investigated as intercalant. Here, we report a systematic investigation, with a multi-technique approach, of the phase formation of Rb under epitaxial monolayer graphene on SiC(0001). We explore a wide phase space with two control parameters: the Rb density (i.e., deposition time) and sample temperature (i.e., room- and low-temperature). We reveal the emergence of $(2 \times 2)$ and $(\sqrt{3} \times \sqrt{3})$R30° structures formed by a single alkali metal layer intercalated between monolayer graphene and the interfacial C-rich reconstructed surface, also known as buffer layer. Rb intercalation also results in a strong n-type doping of the graphene layer. Progressively annealing to high temperatures, we first reveal diffusion of Rb atoms which results in the enlargement of intercalated areas. As desorption sets in, intercalated regions progressively shrink and fragment. Eventually, at approximately 600°C the initial surface is retrieved, indicating the reversibility of the intercalation process.

cond-mat.mtrl-sci↗

arXiv2022

Boron nitride-graphene in-plane hexagonal heterostructure in oxygen environment

Aiming to improve fabrication protocols for boron nitride and graphene (h-BNG) lateral heterostructures, we studied the growth of h-BNG thin films on platinum and their behavior in an oxygen environment. We employed a surface science approach based on advanced spectroscopy and imaging techniques to investigate the evolution of surface stoichiometry and chemical intermediates at each reaction step. During oxygen exposure at increasing temperatures, we observed progressive and subsequent intercalation of oxygen, and selective etching of graphene accompanied by the oxidation of boron. Additionally, by exploiting the O2 etching selectivity towards graphene at 250°C and repeating growth cycles, we obtained in-plane h-BNG layers with controllable compositions and vertically stacked h-BN/Gr heterostructures without the use of consecutive transfer procedures. The growth using a single precursor molecule can be beneficial for the development of versatile atomically thin layers for electronic devices.

cond-mat.mtrl-sci↗

arXiv2015

Tuning the Electronic Structure of Monolayer Graphene/MoS2 van der Waals Heterostructures via Interlayer Twist

We directly measure the electronic structure of twisted graphene/MoS2 van der Waals heterostructures, in which both graphene and MoS2 are monolayers. We use cathode lens microscopy and microprobe angle-resolved photoemission spectroscopy measurements to image the surface, determine twist angle, and map the electronic structure of these artificial heterostructures. For monolayer graphene on monolayer MoS2, the resulting band structure reveals the absence of hybridization between the graphene and MoS2 electronic states. Further, the graphene-derived electronic structure in the heterostructures remains intact, irrespective of the twist angle between the two materials. In contrast, however, the electronic structure associated with the MoS2 layer is found to be twist-angle dependent; in particular, the relative difference in the energy of the valence band maximum at Γ and K of the MoS2 layer varies from approximately 0 to 0.2 eV. Our results suggest that monolayer MoS2 within the heterostructure becomes predominantly an indirect bandgap system for all twist angles except in the proximity of 30 degrees. This result enables potential bandgap engineering in van der Waals heterostructures comprised of monolayer structures.

cond-mat.mes-hall↗

arXiv2015

Broadband Setup for Magnetic-Field-Induced Domain Wall Motion in Cylindrical Nanowires

In order to improve the precision of domain wall dynamics measurements, we develop a coplanar waveguide-based setup where the domain wall motion should be triggered by pulses of magnetic field. The latter are produced by the Oersted field of the waveguide as a current pulse travels toward its termination, where it is dissipated. Our objective is to eliminate a source of bias in domain wall speed estimation while optimizing the field amplitude. Here, we present implementations of this concept for magnetic force microscopy (MFM) and synchrotron-based investigation.

cond-mat.mtrl-sci↗

arXiv2011

Making ARPES Measurements on Corrugated Monolayer Crystals: Suspended Exfoliated Single-Crystal Graphene

Free-standing exfoliated monolayer graphene is an ultra-thin flexible membrane, which exhibits out of plane deformation or corrugation. In this paper, a technique is described to measure the band structure of such free-standing graphene by angle-resolved photoemission. Our results show that photoelectron coherence is limited by the crystal corrugation. However, by combining surface morphology measurements of the graphene roughness with angle-resolved photoemission, energy dependent quasiparticle lifetime and bandstructure measurements can be extracted. Our measurements rely on our development of an analytical formulation for relating the crystal corrugation to the photoemission linewidth. Our ARPES measurements show that, despite significant deviation from planarity of the crystal, the electronic structure of exfoliated suspended graphene is nearly that of ideal, undoped graphene; we measure the Dirac point to be within 25 meV of $E_F$ . Further, we show that suspended graphene behaves as a marginal Fermi-liquid, with a quasiparticle lifetime which scales as $(E - E_F)^{-1}$; comparison with other graphene and graphite data is discussed.

cond-mat.mtrl-sci↗

arXiv2008

Spectro-microscopy of single and multi-layer graphene supported by a weakly interacting substrate

We report measurements of the electronic structure and surface morphology of exfoliated graphene on an insulating substrate using angle-resolved photoemission and low energy electron diffraction. Our results show that although exfoliated graphene is microscopically corrugated, the valence band retains a massless fermionic dispersion, with a Fermi velocity of ~10^6 m/s. We observe a close relationship between the morphology and electronic structure, which suggests that controlling the interaction between graphene and the supporting substrate is essential for graphene device applications.

cond-mat.mtrl-sci↗