arXiv subjects

Theodor Luibrand

Publications and source records attributed to Theodor Luibrand.

4 recordsLinked to original sources

arXiv2024

Non-volatile multi-state electrothermal resistive switching in a strongly correlated insulator thin-film device

Strongly correlated insulators, such as Mott or charge-transfer insulators, exhibit a strong temperature dependence in their resistivity. Consequently, self-heating effects can lead to electrothermal instabilities in planar thin film devices of these materials. When the electrical bias current exceeds a device-specific threshold, the device can switch from a high- to a low-resistance state through the formation of metallic filaments. However, since the current and temperature redistribution effects that create these filaments are sustained by local Joule heating, a reduction of the bias current below a second (lower) threshold leads to the disappearance of filaments, and the device switches back into the high-resistance state. Hence, electrothermal resistive switching is usually volatile. Here, on the contrary, we report on non-volatile resistive switching in a planar $\mathrm{NdNiO}_3$ thin-film device. By combining electrical transport measurements with optical wide-field microscopy, we provide evidence for a metallic filament that persists even after returning the bias current to zero. We attribute this effect to the pronounced hysteresis between the cooling and heating branches in the resistance vs. temperature dependence of the device. At least one hundred intermediate resistance states can be prepared, which are persistent as long as the base temperature is kept constant. Further, the switching process is non-destructive, and thermal cycling can reset the device to its pristine state.

physics.app-ph↗

arXiv2024

Laser-induced quenching of metastability at the Mott-insulator to metal transition

There is growing interest in strongly correlated insulator thin films because the intricate interplay of their intrinsic and extrinsic state variables causes memristive behavior that might be used for bio-mimetic devices in the emerging field of neuromorphic computing. In this study we find that laser irradiation tends to drive V$_2$O$_3$ from supercooled/superheated metastable states towards thermodynamic equilibrium, most likely in a non-thermal way. We study thin films of the prototypical Mott-insulator V$_2$O$_3$, which show spontaneous phase separation into metal-insulator herringbone domains during the Mott transition. Here, we use low-temperature microscopy to investigate how these metal-insulator domains can be modified by scanning a focused laser beam across the thin film surface. We find that the response depends on the thermal history: When the thin film is heated from below the Mott transition temperature, the laser beam predominantly induces metallic domains. On the contrary, when the thin film is cooled from a temperature above the transition, the laser beam predominantly induces insulating domains. Very likely, the V$_2$O$_3$ thin film is in a superheated or supercooled state, respectively, during the first-order phase transition, and the perturbation by a laser beam drives these metastable states into stable ones. This way, the thermal history is locally erased. Our findings are supported by a phenomenological model with a laser-induced lowering of the energy barrier between the metastable and equilibrium states.

cond-mat.str-el↗

arXiv2023

Characteristic lengthscales of the electrically-induced insulator-to-metal transition

Some correlated materials display an insulator-to-metal transition as the temperature is increased. In most cases this transition can also be induced electrically, resulting in volatile resistive switching due to the formation of a conducting filament. While this phenomenon has attracted much attention due to potential applications, many fundamental questions remain unaddressed. One of them is its characteristic lengths: what sets the size of these filaments, and how does this impact resistive switching properties. Here we use a combination of wide-field and scattering-type scanning near-field optical microscopies to characterize filament formation in NdNiO3 and SmNiO3 thin films. We find a clear trend: smaller filaments increase the current density, yielding sharper switching and a larger resistive drop. With the aid of numerical simulations, we discuss the parameters controlling the filament width and, hence, the switching properties.

cond-mat.mtrl-sci↗

arXiv2021

Optical imaging of strain-mediated phase coexistence during electrothermal switching in a Mott insulator

Resistive-switching -- the current-/voltage-induced electrical resistance change -- is at the core of memristive devices, which play an essential role in the emerging field of neuromorphic computing. This study is about resistive switching in a Mott-insulator, which undergoes a thermally driven metal-to-insulator transition. Two distinct switching mechanisms were reported for such a system: electric-field-driven resistive switching and electrothermal resistive switching. The latter results from an instability caused by Joule heating. Here, we present the visualization of the reversible resistive switching in a planar V$_2$O$_3$ thin-film device using high-resolution wide-field microscopy in combination with electric transport measurements. We investigate the interaction of the electrothermal instability with the strain-induced spontaneous phase-separation in the V$_2$O$_3$ thin film at the Mott-transition. The photomicrographs show the formation of a narrow metallic filament with a minimum width $\lesssim$ 500\,nm. Although the filament formation and the overall shape of the current-voltage characteristics (IVCs) are typical of an electrothermal breakdown, we also observe atypical effects like oblique filaments, filament splitting, and hysteretic IVCs with sawtooth-like jumps at high currents in the low-resistance regime. We were able to reproduce the experimental results in a numerical model based on a two-dimensional resistor network. This model demonstrates that resistive switching, in this case, is indeed electrothermal and that the intrinsic heterogeneity is responsible for the atypical effects. This heterogeneity is strongly influenced by strain, thereby establishing a link between switching dynamics and structural properties.

cond-mat.mtrl-sci↗