arXiv subjects

Thibaut Paumard

Publications and source records attributed to Thibaut Paumard.

At least 19 recordsLinked to original sources

arXiv2026

GRAVITY+: reducing non-common-path aberrations for sub-10 μas astrometric accuracy

GRAVITY is a state-of-the-art instrument for near-infrared astrometric interferometry that routinely achieves astrometric accuracy of 30-100 microarcsecond in its phase-referenced dual-field mode. However, its fundamental limit is not yet reached, and can still be improved by several factors. In this paper, we focus on the effect of systematics, and in particular the effect of non-common path aberrations between the science channel and the metrology signal in the GRAVITY Fiber Coupler. Through comprehensive laboratory measurements using a dedicated fiber coupler replica and phase-shifting interferometry at 1908 nm, we have characterized these high-order wavefront errors with nanometer precision in the laboratory. We characterized on-sky the effect of these high-order wavefront imperfections on narrow-angle astrometry, using observations of the binary system GJ65. As part of the GRAVITY+ project, high-precision mirrors designed for nanometer-level surface quality, bringing an order of magnitude improvement over existing GRAVITY injection optics, are currently in production and will be installed in the fiber coupler units by the end of 2027. This upgrade is expected to enable astrometric accuracy at the sub-10 microarcsecond level in dual-field mode with integration times of just a few minutes.

astro-ph.IM↗

arXiv2026

Effects of a disk structure on stellar motion at the Galactic Center

Stellar orbits are key for probing the environment of the supermassive black hole at the Galactic Center, Sagittarius A$^*$. So far, the mass around SgrA$^*$ has been assumed to be spherically distributed. However, the extended mass may instead be flattened, creating disk-like structures. We investigate the effects that a thin disk structure would have on stars at the Galactic Center, focusing on star S2 and S301 and the clockwise stellar disk. We derive analytically the acceleration exerted by a disk with power law density $Σ\propto r^{-γ}$. We use this acceleration to compute the osculating equations and the variations of the orbital elements, showing how the latter depend on the orientation of the disk with respect to the orbital plane. We find that the disk structure induces a secular shift in the semi-latus rectum, an extra in-plane precession and an out-of-plane precession. The former is neither present at the low-order post Newtonian description that we use for the black hole, nor when a spherical mass distribution is considered. The latter can be competitive with the Lense-Thirring precession induced by the spin of SgrA$^*$ on S301 motion, depending on the mass, the radial extent and the orientation of the disk. Since the Lense-Thirring precession is negligible in S2 motion, the out-of-plane precession can be used to place upper limits on the non luminous mass of disk-like structures at the Galactic Center. The limits might significantly differ from those obtained for spherical distributions and depend on the disk parameters. These results highlight the importance of constraining disk-like structures when using stellar orbits to probe the central black hole, in particular its spin. Once mass estimates are at hand, one can quantify the disk's effect on S301 motion and the resulting degeneracy with a future measurement of SgrA$^*$ spin.

astro-ph.GA↗

arXiv2026

Using VLTI/GRAVITY+ to determine the identity of a third planet candidate in the PDS 70 system

Detections of protoplanets are rare and protoplanetary disk features mischaracterized as planets are common. PDS 70 is one of only two stars known to host multiple confirmed protoplanets, PDS 70 b and c, and repeat detections of a third point-like source in the system suggest the presence of third inner planet. However, previous observations of this third source are insufficient to distinguish whether it is a planet or a concentrated dust clump in Keplerian motion. Our observations with VLTI/GRAVITY+ did not re-detect this point-like source, suggesting that it is, in fact, a dust clump and not a planet. These observations demonstrate how the angular resolving power of VLTI/GRAVITY+ can be used to distinguish between protoplanets and protoplanetary disk features.

astro-ph.EP↗

arXiv2026

Direct spectroscopic confirmation of the young embedded proto-planet WISPIT 2c

WISPIT 2 is a nearby young star with a multi-ringed disk which was recently confirmed to host a ~4.9 MJup gas giant planet embedded in a large (60 au) gap at a radial separation of 57 au from the host star. We confirm and characterise a second, close-in planet in the WISPIT 2 system using a combination of new VLT/SPHERE H-band dual-polarisation imaging and VLTI/GRAVITY K-band interferometric observations of the WISPIT 2 system. The GRAVITY detection is consistent with a point-like source while its extracted K-band spectrum shows CO band-head absorption at 2.3 microns and a continuum shape consistent with a young giant planet. From the GRAVITY data we extract a medium resolution K-band spectrum of the companion and fit atmospheric model grids using the species tool with nested sampling to constrain its effective temperature, radius, and luminosity. We infer Teff of 1500-2600 K, a radius of 0.91-2.2 RJup, and a luminosity of (-3.47)-(-3.63). Comparison with evolutionary tracks implies a mass range of 8-12 MJup, approximately twice as massive as the previously confirmed WISPIT 2b. The astrometry rules out a background source and marginally detects orbital motion of WISPIT 2c, which needs further follow-up observations for confirmation. WISPIT 2 now becomes an analogue to PDS 70, offering a second laboratory for studying the formation and early evolution of a multi-planet system within its natal disk.

astro-ph.EP↗

arXiv2025

A few ideas to promote inclusion

Promoting diversity, equity, inclusion and accessibility (DEIA) is both a legal and professional responsibility in French research institutions. This paper presents practical strategies to foster inclusive work environments within French research units. We summarize the regulatory context, key findings from the INSU-AA prospective on discrimination, and fundamental principles for promoting equity. We discuss approaches to mitigate implicit biases across all career stages, from early education to retirement, and outline strategies for equitable recruitment and career advancement. Concrete initiatives in one of our units (LESIA/LIRA) are described, including internal communications, exhibitions, and accessible pedagogical activities. The creation of a dedicated commission within the unit council ensures coordinated DEIA efforts, legitimized by institutional support and methodical planning. By sharing these experiences, we provide actionable guidance for research units seeking to advance DEIA in science.

physics.soc-ph↗

arXiv2025

GRAVITY+ adaptive optics (GPAO) tests in Europe

We present in this proceeding the results of the test phase of the GRAVITY+ adaptive optics. This extreme AO will enable both high-dynamic range observations of faint companions (including exoplanets) thanks to a 40x40 sub-apertures wavefront control, and sensitive observations (including AGNs) thanks to the addition of a laser guide star to each UT of the VLT. This leap forward is made thanks to a mostly automated setup of the AO, including calibration of the NCPAs, that we tested in Europe on the UT+atmosphere simulator we built in Nice. We managed to reproduce in laboratory the expected performances of all the modes of the AO, including under non-optimal atmospheric or telescope alignment conditions, giving us the green light to proceed with the Assembly, Integration and Verification phase in Paranal.

astro-ph.IM↗

arXiv2024

First Resolution of Microlensed Images of a Binary-Lens Event

We resolve the multiple images of the binary-lens microlensing event ASASSN-22av using the GRAVITY instrument of the Very Large Telescope Interferometer (VLTI). The light curves show weak binary-lens perturbations, complicating the analysis, but the joint modeling with the VLTI data breaks several degeneracies, arriving at a strongly favored solution. Thanks to precise measurements of angular Einstein radius θ_E = 0.724 +/- 0.002 mas and microlens parallax, we determine that the lens system consists of two M dwarfs with masses of M_1 = 0.258 +/- 0.008 M_sun and M_2 = 0.130 +/- 0.007 M_sun, a projected separation of r_\perp = 6.83 +/- 0.31 au and a distance of D_L = 2.29 +/- 0.08 kpc. The successful VLTI observations of ASASSN-22av open up a new path for studying intermediate-separation (i.e., a few astronomical units) stellar-mass binaries, including those containing dark compact objects such as neutron stars and stellar-mass black holes.

astro-ph.SR↗

arXiv2024

Simplified model(s) of the GRAVITY+ adaptive optics system(s) for performance prediction

In the context of the GRAVITY+ upgrade, the adaptive optics (AO) systems of the GRAVITY interferometer are undergoing a major lifting. The current CILAS deformable mirrors (DM, 90 actuators) will be replaced by ALPAO kilo-DMs (43x43, 1432 actuators). On top of the already existing 9x9 Shack-Hartmann wavefront sensors (SH-WFS) for infrared (IR) natural guide star (NGS), new 40x40 SH-WFSs for visible (VIS) NGS will be deployed. Lasers will also be installed on the four units of the Very Large Telescope to provide a laser guide star (LGS) option with 30x30 SH-WFSs and with the choice to either use the 9x9 IR-WFSs or 2x2 VIS-WFSs for low order sensing. Thus, four modes will be available for the GRAVITY+ AO system (GPAO): IR-NGS, IR-LGS, VIS-NGS and VIS-LGS. To prepare the instrument commissioning and help the observers to plan their observations, a tool is needed to predict the performances of the different modes and for different observing conditions (NGS magnitude, science object magnitude, turbulence conditions...) We developed models based on a Mar{é}chal approximation to predict the Strehl ratio of the four GPAO modes in order to feed the already existing tool that simulates the GRAVITY performances. Waiting for commissioning data, our model was validated and calibrated using the TIPTOP toolbox, a Point Spread Function simulator based on the computation of Power Spectrum Densities. In this work, we present our models of the NGS modes of GPAO and their calibration with TIPTOP.

astro-ph.IM↗

arXiv2024

Open loop calibration and closed loop non-perturbative estimation of the lateral errors of an adaptive optics system: examples with GRAVITY+ and CHARA experimental data

Performances of an adaptive optics (AO) system are directly linked with the quality of its alignment. During the instrument calibration, having open loop fast tools with a large capture range are necessary to quickly assess the system misalignment and to drive it towards a state allowing to close the AO loop. During operation, complex systems are prone to misalignments (mechanical flexions, rotation of optical elements, etc.) that potentially degrade the AO performances, creating a need for a monitoring tool to tackle their driftage. In this work, we first present an improved perturbative method to quickly assess large lateral errors in open loop. It uses the spatial correlation of the measured interaction matrix of a limited number of 2D spatial modes with a synthetic model. Then, we introduce a novel solution to finely measure and correct these lateral errors via the closed loop telemetry. Non-perturbative, this method consequently does not impact the science output of the instrument. It is based on the temporal correlation of 2D spatial frequencies in the deformable mirror commands. It is model-free (no need of an interaction matrix model) and sparse in the Fourier space, making it fast and easily scalable to complex systems such as future extremely large telescopes. Finally, we present some results obtained on the development bench of the GRAVITY+ extreme AO system (Cartesian grid, 1432 actuators). In addition, we show with on-sky results gathered with CHARA and GRAVITY/CIAO that the method is adaptable to non-conventional AO geometries (hexagonal grids, 60 actuators).

eess.SP↗

arXiv2024

Improving constraints on the extended mass distribution in the Galactic Center with stellar orbits

Studying the orbital motion of stars around Sagittarius A* in the Galactic Center provides a unique opportunity to probe the gravitational potential near the supermassive black hole at the heart of our Galaxy. Interferometric data obtained with the GRAVITY instrument at the Very Large Telescope Interferometer (VLTI) since 2016 has allowed us to achieve unprecedented precision in tracking the orbits of these stars. GRAVITY data have been key to detecting the in-plane, prograde Schwarzschild precession of the orbit of the star S2, as predicted by General Relativity. By combining astrometric and spectroscopic data from multiple stars, including S2, S29, S38, and S55 - for which we have data around their time of pericenter passage with GRAVITY - we can now strengthen the significance of this detection to an approximately $10 σ$ confidence level. The prograde precession of S2's orbit provides valuable insights into the potential presence of an extended mass distribution surrounding Sagittarius A*, which could consist of a dynamically relaxed stellar cusp comprised of old stars and stellar remnants, along with a possible dark matter spike. Our analysis, based on two plausible density profiles - a power-law and a Plummer profile - constrains the enclosed mass within the orbit of S2 to be consistent with zero, establishing an upper limit of approximately $1200 \, M_\odot$ with a $1 σ$ confidence level. This significantly improves our constraints on the mass distribution in the Galactic Center. Our upper limit is very close to the expected value from numerical simulations for a stellar cusp in the Galactic Center, leaving little room for a significant enhancement of dark matter density near Sagittarius A*.

astro-ph.GA↗

arXiv2023

The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI

The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.

astro-ph.IM↗

arXiv2023

General relativistic effects and the near-infrared and X-ray variability of Sgr A* I

The near-infrared (NIR) and X-ray emission of Sagittarius A* shows occasional bright flares that are assumed to originate from the innermost region of the accretion flow. We identified $25$ $4.5 μm$ and $24$ X-ray flares in archival data obtained with the \textit{Spitzer} and \textit{Chandra} observatories. With the help of general relativistic ray-tracing code, we modeled trajectories of ``hot spots'' and studied the light curves of the flares for signs of the effects of general relativity. Despite their apparent diversity in shape, all flares share a common, exponential impulse response, a characteristic shape that is the building block of the variability. This shape is symmetric, that is, the rise and fall times are the same. Furthermore, the impulse responses in the NIR and X-ray are identical within uncertainties, with an exponential time constant $τ\sim 15$ minute. The observed characteristic flare shape is inconsistent with hot-spot orbits viewed edge-on. Individually modeling the light curves of the flares, we derived constraints on the inclination of the orbital plane of the hot spots with respect to the observer ($i \sim 30^{\circ} , < 75^{\circ} $) and on the characteristic timescale of the intrinsic variability (tens of minutes).

astro-ph.HE↗

arXiv2022

Building a GRAVITY+ Adaptive Optics Test Bench

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

astro-ph.IM↗

arXiv2022

Regularized 3D spectroscopy with CubeFit: method and application to the Galactic Center Circumnuclear disk

The Galactic Center black hole and the nuclear star cluster are surrounded by a clumpy ring of gas and dust (the circumnuclear disk, CND) that rotates about them at a standoff distance of ~1.5 pc. The mass and density of individual clumps in the CND are disputed. We seek to use H$_2$ to characterize the clump size distribution and to investigate the morphology and dynamics of the interface between the ionized interior layer of the CND and the molecular reservoir lying further out (corresponding to the inner rim of the CND, illuminated in ultraviolet light by the central star cluster). We have observed two fields of approximately 20"x20" in the CND at near-infrared wavelengths with the OSIRIS spectro-imager at the Keck Observatory. These two fields, located at the approaching and receding nodes of the CND, best display this interface. Our data cover two H$_2$ lines as well as the Br$γ$ line (tracing H ii). We have developed the tool CubeFit, an original method to extract maps of continuous physical parameters (such as velocity field and velocity dispersion) from integral-field spectroscopy data, using regularization to largely preserve spatial resolution in regions of low signal-to-noise ratio. This original method enables us to isolate compact, bright features in the interstellar medium of the CND. Several clumps in the southwestern field assume the appearance of filaments, many of which are parallel to each other. We conclude that these clumps cannot be self-gravitating.

astro-ph.GA↗

arXiv2021

The dark mass signature in the orbit of S2

Aims. We explore a strategy for how the Schwarzschild and mass precessions can be separated from each other despite their secular interference, by pinpointing their signatures within a single orbit. From these insights, we then seek to assess the prospects for improving the dark mass constraints in the coming years. Methods. We analysed the dependence of the osculating orbital elements and of the observables on true anomaly, and we compared these functions for models with and without extended mass. We then translated the maximum astrometric impacts within one orbit to detection thresholds given hypothetical data of different accuracies. These theoretical investigations were then supported and complemented by an extensive mock-data fitting analysis. Results. We have four main results. 1. While the mass precession almost exclusively impacts the orbit in the apocentre half, the Schwarzschild precession almost exclusively impacts it in the pericentre half, allowing for a clear separation of the effects. 2. Data that are limited to the pericentre half are not sensitive to a dark mass, while data limited to the apocentre half are, but only to a limited extent. 3. A full orbit of data is required to substantially constrain a dark mass. 4. For a full orbit of astrometric and spectroscopic data, the astrometric component in the pericentre half plays the stronger role in constraining the dark mass than the astrometric data in the apocentre half. Furthermore, we determine the 1σ dark mass detection thresholds given different datasets on one full orbit. In particular, with a full orbit of data of 50 microarcseconds (VLTI/GRAVITY) and 10 km/s (VLT/SINFONI) precision, the 1σ bound would improve to about 1000 solar masses, for example.

astro-ph.GA↗

arXiv2021

Mapping the Galactic centre's dark cluster via Resonant Relaxation

Supermassive black holes in the centre of galaxies dominate the gravitational potential of their surrounding stellar clusters. In these dense environments, stars follow nearly Keplerian orbits, which get slowly distorted as a result of the potential fluctuations generated by the stellar cluster itself as a whole. In particular, stars undergo a rapid relaxation of their eccentricities through both resonant and non-resonant processes. An efficient implementation of the resonant diffusion coefficients allows for detailed and systematic explorations of the parameter space describing the properties of the stellar cluster. In conjunction with recent observations of the S-cluster orbiting SgrA*, this framework can be used to jointly constrain the distribution of the unresolved, old, background stellar cluster and the characteristics of a putative dark cluster. Specifically, we show how this can be used to estimate the typical mass and cuspide exponent of intermediate-mass black holes consistent with the relaxed state of the distribution of eccentricities in the observed S-cluster. This should prove useful in constraining super massive black hole formation scenarios.

astro-ph.GA↗

arXiv2021

The hot dust in the heart of NGC 1068's torus: A 3D radiative model constrained with GRAVITY/VLTi

The central region of NGC 1068 is one of the closest and most studied Active Galactic Nucleus. It is known to be of type 2, meaning that its accretion disk is obscured by a large amount of dust and gas. The main properties of the obscuring structure are still to be determined. We model the inner edge of this structure, where the hot dust responsible for the near-infrared emission reaches its sublimation temperature. At first, we use simple geometrical models in image reconstructions to determine the main 2D geometrical properties of the source. In a second step, we try to reproduce the observables with K-band images produced by 3D radiative transfer simulations of a heated dusty disk. We explore various parameters to find an optimal solution and a model consistent with all the observables. The three methods indicate an elongated structure with 4 x 6 mas dimensions and its major axis along the NW/SE direction. All three of them suggest that the object looks like an elongated ring rather than an elongated thin disk, with its northeast edge less luminous than the South-West one. The best 3D model is a thick disk with an inner radius r=0.21 +/- 0.03 pc and a half-opening angle $α_{1/2}=21\pm8\degree$ observed with an inclination $i=44_{-6}^{10}$\,$\degree$ and $PA=150_{-13}^{8}$\,$\degree$. A high density of dust $n=5_{-2.5}^{+5}\ M_{\odot}.pc^{-3}$ is required to explain the contrast between the two edges by self-absorption from the closer one. The overall structure is obscured by a large foreground obscuration $A_V \sim 75$. The hot dust is not responsible for the obscuration of the central engine. The geometry and the orientation of the structure are different from those of the previously observed maser and molecular disks. A single disk is unable to account for these differences, and we favor a description of the source where multiple rings are entangled around the central mass.

astro-ph.GA↗

arXiv2019

Scalar field effects on the orbit of S2 star

Precise measurements of the S-stars orbiting SgrA* have set strong constraints on the nature of the compact object at the centre of the Milky Way. The presence of a black hole in that region is well established, but its neighboring environment is still an open debate. In that respect, the existence of dark matter in that central region may be detectable due to its strong signatures on the orbits of stars: the main effect is a Newtonian precession which will affect the overall pericentre shift of S2, the latter being a target measurement of the GRAVITY instrument. The exact nature of this dark matter (e.g., stellar dark remnants or diffuse dark matter) is unknown. This article assumes it to be an scalar field of toroidal distribution, associated with ultra-light dark matter particles, surrounding the Kerr black hole. Such a field is a form of "hair" expected in the context of superradiance, a mechanism that extracts rotational energy from the black hole. Orbital signatures for the S2 star are computed and shown to be detectable by GRAVITY. The scalar field can be constrained because the variation of orbital elements depends both on the relative mass of the scalar field to the black hole and on the field mass coupling parameter.

astro-ph.GA↗