SearcharxivSearch

arXiv subjects

Thomas Binhammer

Publications and source records attributed to Thomas Binhammer.

4 recordsLinked to original sources

Ultrafast MHz-rate burst-mode pump-probe laser for the FLASH FEL facility based on nonlinear compression of ps-level pulses from an Yb-amplifier chain

The Free-Electron Laser (FEL) FLASH offers the worldwide still unique capability to study ultrafast processes with high-flux, high-repetition rate XUV and soft X-ray pulses. The vast majority of experiments at FLASH are of pump-probe type. Many of them rely on optical ultrafast lasers. Here, a novel FEL facility laser is reported which combines high average power output from Yb:YAG amplifiers with spectral broadening in a Herriott-type multi-pass cell and subsequent pulse compression to sub-100 fs durations. Compared to other facility lasers employing optical parametric amplification, the new system comes with significantly improved noise figures, compactness, simplicity and power efficiency. Like FLASH, the optical laser operates with 10 Hz burst repetition rate. The bursts consist of 800 $μ$s long trains of up to 800 ultrashort pulses being synchronized to the FEL with femtosecond precision. In the experimental chamber, pulses with up to 50 $μ$J energy, 60 fs FWHM duration and 1 MHz rate at 1.03 $μ$m wavelength are available and can be adjusted by computer-control. Moreover, nonlinear polarization rotation is implemented to improve laser pulse contrast. First cross-correlation measurements with the FEL at the plane-grating monochromator photon beamline are demonstrated, exhibiting the suitability of the laser for user experiments at FLASH.

physics.optics

Tunable sub-20 fs pulses from a 500 kHz OPCPA with 15 W average power based on an all-ytterbium laser

An optical parametric chirped pulse amplifier fully based on Yb lasers at 500 kHz is described. Passive optical-synchronization is achieved between a fiber laser-pumped white-light and a 515 nm pump produced with a 200 W picosecond Yb:YAG InnoSlab amplifier. An output power up to 19.7 W with long-term stability of 0.3% is demonstrated for wavelength tunable pulses between 680 nm and 900 nm and spectral stability of 0.2%; 16.5 W can be achieved with a bandwidth supporting 5.4 fs pulses. We demonstrate compression of 30 microjoule pulses to sub-20 fs duration with a prism compressor, suitable for high harmonic generation.

physics.optics

Continuous loading of cold atoms into a Ioffe-Pritchard magnetic trap

We present a robust continuous optical loading scheme for a Ioffe-Pritchard (IP) type magnetic trap. Atoms are cooled and trapped in a modified magneto-optical trap (MOT) consisting of a conventional 2D-MOT in radial direction and an axial molasses. The radial magnetic field gradient needed for the operation of the 2D-MOT is provided by the IP trap. A small axial curvature and offset field provide magnetic confinement and suppress spin-flip losses in the center of the magnetic trap without altering the performance of the 2D-MOT. Continuous loading of atoms into the IP trap is provided by radiative leakage from the MOT to a metastable level which is magnetically trapped and decoupled from the MOT light. We are able to accumulate 30 times more atoms in the magnetic trap than in the MOT. The absolute number of $2\times 10^8$~atoms is limited by inelastic collisions. A model based on rate equations shows good agreement with our data. Our scheme can also be applied to other atoms with similar level structure like alkaline earth metals.

quant-ph

Doppler cooling of an optically dense cloud of trapped atoms

We have studied a general technique for laser cooling a cloud of polarized trapped atoms down to the Doppler temperature. A one-dimensional optical molasses using polarized light cools the axial motional degree of freedom of the atoms in the trap. Cooling of the radial degrees of freedom can be modelled by reabsorption of scattered photons in the optically dense cloud. We present experimental results for a cloud of chromium atoms in a magnetic trap. A simple model based on rate equations shows quantitative agreement with the experimental results. This scheme allows us to readily prepare a dense cloud of atoms in a magnetic trap with ideal starting conditions for evaporative cooling.

quant-ph