Searcharxiv⌕ Search

arXiv subjects

Thomas Cecil

Publications and source records attributed to Thomas Cecil.

17 recordsLinked to original sources
arXiv2023

Characterization of MKIDs for CMB observation at 220 GHz with the South Pole Telescope

We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $\alpha_k = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $\eta \sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5\% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$ for both detector orientations.

astro-ph.IM↗
arXiv2022

Report of the Instrumentation Frontier Working Group for Snowmass 2021

Detector instrumentation is at the heart of scientific discoveries. Cutting edge technologies enable US particle physics to play a leading role worldwide. This report summarizes the current status of instrumentation for High Energy Physics (HEP), the challenges and needs of future experiments and indicates high priority research areas. The Snowmass Instrumentation Frontier studies detector technologies and Research and Development (R&D) needed for future experiments in collider physics, neutrino physics, rare and precision physics and at the cosmic frontier. It is divided into more or less diagonal areas with some overlap among a few of them. We lay out five high-level key messages that are geared towards ensuring the health and competitiveness of the US detector instrumentation community, and thus the entire particle physics landscape.

hep-ex↗
arXiv2022

Report of the Topical Group on Quantum Sensors for Snowmass 2021

Quantum Sensors offer great potential for providing enhanced sensitivity in high energy physics experiments. In this report we provide a summary of key quantum sensors technologies - interferometers, optomechanics, and clocks; spin dependent sensors; superconducting sensors; and quantum calorimeters - highlighting existing experiments along with areas for development. We also provide a set of key messages intended to further advance the state of quantum sensors used for high energy physics specific applications.

physics.ins-det↗
arXiv2022

Snowmass 2021: Superconducting Sensor Fabrication Capabilities for HEP Science

Superconducting sensors are a key enabling technology for many HEP experiments with advances in sensor capabilities leading directly to expanded science reach. The unique materials and processes required for the fabrication of these sensors makes commercial sourcing impractical in comparison with semiconducting devices. Subsequently, the development and fabrication of new sensors are often performed at academic cleanrooms supported through HEP basic detector research and/or project funds. While this operational model has been successful to date, we are at a turning point in the history of superconducting electronics, as evidenced by the rapid growth in the field of quantum computing, when scale and sophistication of these sensors can lead to significant progress. In order to achieve this progress and meet the needs of the next generations of HEP experiments, continued support of all stages of the superconducting sensors development pipeline is necessary.

physics.ins-det↗
arXiv2022

Quantum Sensors for High Precision Measurements of Spin-dependent Interactions

The applications of spin-based quantum sensors to measurements probing fundamental physics are surveyed. Experimental methods and technologies developed for quantum information science have rapidly advanced in recent years, and these tools enable increasingly precise control and measurement of spin dynamics. Theories of beyond-the-Standard-Model physics predict, for example, symmetry violating electromagnetic moments aligned with particle spins, exotic spin-dependent forces, coupling of spins to ultralight bosonic dark matter fields, and changes to the local environment that affect spins. Spin-based quantum sensors can be used to search for these myriad phenomena, and offer a methodology for tests of fundamental physics that is complementary to particle colliders and large scale particle detectors. Areas of technological development that can significantly enhance the sensitivity of spin-based quantum sensors to new physics are highlighted.

quant-ph↗
arXiv2022

Snowmass 2021 CMB-S4 White Paper

This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.

astro-ph.CO↗
arXiv2022

Snowmass 2021: Quantum Sensors for HEP Science -- Interferometers, Mechanics, Traps, and Clocks

A wide range of quantum sensing technologies are rapidly being integrated into the experimental portfolio of the high energy physics community. Here we focus on sensing with atomic interferometers; mechanical devices read out with optical or microwave fields; precision spectroscopic methods with atomic, nuclear, and molecular systems; and trapped atoms and ions. We give a variety of detection targets relevant to particle physics for which these systems are uniquely poised to contribute. This includes experiments at the precision frontier like measurements of the electron dipole moment and electromagnetic fine structure constant and searches for fifth forces and modifications of Newton's law of gravity at micron-to-millimeter scales. It also includes experiments relevant to the cosmic frontier, especially searches for gravitional waves and a wide variety of dark matter candidates spanning heavy, WIMP-scale, light, and ultra-light mass ranges. We emphasize here the need for more developments both in sensor technology and integration into the broader particle physics community.

quant-ph↗
arXiv2021

Optical leakage mitigation in ortho-mode transducer detectors for microwave applications

Planar ortho-mode transducers (OMTs) are a commonly used method of coupling optical signals between waveguides and on-chip circuitry and detectors. While the ideal OMT-waveguide coupling requires minimal disturbance to the waveguide, when used for mm-wave applications the waveguide is typically constructed from two sections to allow the OMT probes to be inserted into the waveguide. This break in the waveguide is a source of signal leakage and can lead to loss of performance and increased experimental systematic errors. Here we report on the development of new OMT-to-waveguide coupling structures with the goal of reducing leakage at the detector wafer interface. The pixel to pixel optical leakage due to the gap between the coupling waveguide and the backshort is reduced by means of a protrusion that passes through the OMT membrane and electrically connects the two waveguide sections on either side of the wafer. High frequency electromagnetic simulations indicate that these protrusions are an effective method to reduce optical leakage in the gap by ~80% percent, with a ~60% filling factor, relative to an standard OMT coupling architecture. Prototype devices have been designed to characterize the performance of the new design using a relative measurement with varying filling factors. We outline the simulation setup and results, and present a chip layout and sample box that will be used to perform the initial measurements.

astro-ph.IM↗
arXiv2020

CMB-S4: Forecasting Constraints on Primordial Gravitational Waves

CMB-S4---the next-generation ground-based cosmic microwave background (CMB) experiment---is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. Among the science cases pursued with CMB-S4, the quest for detecting primordial gravitational waves is a central driver of the experimental design. This work details the development of a forecasting framework that includes a power-spectrum-based semi-analytic projection tool, targeted explicitly towards optimizing constraints on the tensor-to-scalar ratio, $r$, in the presence of Galactic foregrounds and gravitational lensing of the CMB. This framework is unique in its direct use of information from the achieved performance of current Stage 2--3 CMB experiments to robustly forecast the science reach of upcoming CMB-polarization endeavors. The methodology allows for rapid iteration over experimental configurations and offers a flexible way to optimize the design of future experiments given a desired scientific goal. To form a closed-loop process, we couple this semi-analytic tool with map-based validation studies, which allow for the injection of additional complexity and verification of our forecasts with several independent analysis methods. We document multiple rounds of forecasts for CMB-S4 using this process and the resulting establishment of the current reference design of the primordial gravitational-wave component of the Stage-4 experiment, optimized to achieve our science goals of detecting primordial gravitational waves for $r > 0.003$ at greater than $5\sigma$, or, in the absence of a detection, of reaching an upper limit of $r < 0.001$ at $95\%$ CL.

astro-ph.CO↗
arXiv2019

CMB-S4 Decadal Survey APC White Paper

We provide an overview of the science case, instrument configuration and project plan for the next-generation ground-based cosmic microwave background experiment CMB-S4, for consideration by the 2020 Decadal Survey.

astro-ph.IM↗
arXiv2018

Optical Characterization of the SPT-3G Focal Plane

The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers

astro-ph.IM↗
arXiv2016

Processing of X-ray Microcalorimeter Data with Pulse Shape Variation using Principal Component Analysis

We present a method using principal component analysis (PCA) to process x-ray pulses with severe shape variation where traditional optimal filter methods fail. We demonstrate that PCA is able to noise-filter and extract energy information from x-ray pulses despite their different shapes. We apply this method to a dataset from an x-ray thermal kinetic inductance detector which has severe pulse shape variation arising from position-dependent absorption.

physics.ins-det↗
arXiv2013

X-ray photon detection using superconducting resonators in thermal quasi-equilibrium

Superconducting resonators have to date been used for photon detection in a non-equilibrium manner. In this paper, we demonstrate that such devices can also be used in a thermal quasi-equilibrium manner to detect X-ray photons. We have used a resonator to measure the temperature rise induced by an X-ray photon absorbed in normal metal and superconducting absorbers on continuous and perforated silicon nitride membranes. We observed two distinct pulses with vastly different decay times. We attribute the shorter pulses to non-equilibrium quasiparticle relaxation and the longer pulses to a thermal relaxation process. In addition, we have measured the temperature dependence of the X-ray induced temperature rise and decay times. Finally, we have measured the resonator sensitivity and energy resolution. Superconducting resonators used in a thermal quasi-equilibrium manner have the potential to be used for X-ray microcalorimetry.

cond-mat.supr-con↗
arXiv2012

Tungsten silicide films for microwave kinetic inductance detectors

Microwave Kinetic Inductance Detectors (MKIDs) provide highly multiplexed arrays of detectors that can be configured to operate from the sub-millimeter to the X-ray regime. We have examined two tungsten silicide alloys (W5Si3 and WSi2), which are dense alloys that provide a critical temperature tunable with composition, large kinetic inductance fraction, and high normal-state resistivity. We have fabricated superconducting resonators and provide measurement data on critical temperature, surface resistance, quality factor, noise, and quasiparticles lifetime. Tungsten silicide appears to be promising for microwave kinetic inductance detectors.

cond-mat.supr-con↗
arXiv2007

On Kuiper's conjecture

We prove that any connected proper Dupin hypersurface in $\R^n$ is analytic algebraic and is an open subset of a connected component of an irreducible algebraic set. We prove the same result for any connected non-proper Dupin hypersurface in $\R^n$ that satisfies a certain finiteness condition. Hence any taut submanifold M in $\R^n$, whose tube $M_ε$ satisfies this finiteness condition, is analytic algebraic and is a connected component of an irreducible algebraic set. In particular, we prove that every taut submanifold of dimension $m \leq 4$ is algebraic.

math.DG↗
arXiv2005

Dupin hypersurfaces with four principal curvatures, II

If $M$ is an isoparametric hypersurface in a sphere $S^n$ with four distrinct principal curvatures, then the principal curvatures $κ_1,...,κ_4$ can be ordered so that their multiplicities satisfy $m_1=m_2$ and $m_3=m_4$, and the cross-ratio $r$ of the principal curvatures (the Lie curvature) equals -1. In this paper, we prove that if $M$ is an irreducible connected proper Dupin hypersurface in $\R^n$ (or $S^n$) with four distinct principal curvatures with multiplicities $m_1=m_2 \geq 1$ and $m_3=m_4=1$, and constant Lie curvature $r=-1$, then $M$ is equivalent by Lie sphere transformation to an isoparametric hypersurface in a sphere. This result remains true if the assumption of irreducibility is replaced by compactness and $r$ is merely assumed to be constant.

math.DG↗