arXiv subjects

Thomas E. Cowan

Publications and source records attributed to Thomas E. Cowan.

At least 19 recordsLinked to original sources

arXiv2026

Probing ultrafast heating and ionization dynamics in solid density plasmas with time-resolved resonant X-ray absorption and emission

Heating and ionization are among the most fundamental processes in relativistic laser--solid interactions; however, their spatiotemporal evolution remains challenging to capture experimentally. Here we present detailed diagnosis of high-intensity laser interactions with wire targets, leveraging the extreme spectral brightness of an X-ray free-electron laser in sub-picosecond time-resolved resonant X-ray emission spectroscopy and absorption imaging. Experimental results are compared with comprehensive simulations using atomic collisional--radiative models, particle-in-cell, and magnetohydrodynamics codes to elucidate the underlying physics. These multi-scale simulations reveal extreme sensitivity of basic plasma parameters with widely used models, such as temperature and ionization depth, which are able to be constrained by incorporating a detailed accounting of laser spatial profiles, pre-plasma conditions, and collisional processes. These results provide new insights into heating and ionization dynamics in the high-energy-density regime relevant to inertial fusion energy research, both as an experimental platform for accessing theoretically challenging conditions and as a benchmark for improving models of high-power laser--plasma interactions.

physics.plasm-ph↗

arXiv2026

Reduction of SAXS Signal due to Doppler Broadening Induced Loss of Coherence

We present an analytical and numerical study of how Doppler-induced spectral broadening in laser-heated plasmas degrades the coherence of small-angle X-ray scattering (SAXS) signals, and show that the resulting loss of temporal coherence reduces the SAXS intensity. Applying this formalism to two benchmark geometries - single density steps (wires) and periodic gratings -- we obtain analytic estimates. For gratings, finite coherence simultaneously lowers Bragg-peak heights and broadens their widths, whereas for isolated steps only the overall scaling with q affected. We map the parameter space relevant to current SASE and self-seeded XFELs, revealing that Doppler effects remain managable for the trieval of geometry parameters (less than few 10 % error) for SASE bandwidths but become the dominant error source in seeded configurations or above-keV temperatures. Practical consequences for density-gradient retrieval and interface-sharpness measurements are quantified. The results supply clear criteria for when Doppler broadening must be included in SAXS data analysis and offer a route to infer electron temperature directly from coherence-loss signatures.

physics.plasm-ph↗

arXiv2026

XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF

The imaging platform developed at the High Energy Density - Helmholtz International Beamline for Extreme Fields (HED-HiBEF) instrument at the European XFEL and its applications to high energy density and fusion related research are presented. The platform combines the XFEL beam with the high-intensity short-pulse laser ReLaX and the high-energy nanosecond-pulse laser DiPOLE-100X. The spatial resolution is better than 500 nm and the temporal resolution of the order of 50 fs. We show examples of blast waves and converging cylindrical shocks in aluminium, resonant absorption measurements of specific charged states in copper with ReLaX and planar shocks in polystyrene material generated by DiPOLE-100X. We also discuss the possibilities introduced by combining this imaging platform with a kJ-class laser.

physics.plasm-ph↗

arXiv2025

Microscopy X-ray Imaging enriched with Small Angle X-ray Scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25-micrometer copper wires with 45-fs, 0.9-J, 800-nm pulses at 3.5e19 W/cm2 while probing with 8.2-keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with about 200-nm resolution, while SAXS quantifies their nanometer-scale sharpness through the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after roughly 18 ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of about 25 km/s and a lateral width of several tens of micrometers, demonstrating for the first time the direct observation of shock formation and decay at solid density with few-nanometer precision. This integrated XRM-SAXS method establishes a quantitative, multiscale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

physics.plasm-ph↗

arXiv2025

Demonstration of full-scale spatio-temporal diagnostics of solid-density plasmas driven by an ultra-short relativistic laser pulse using an X-ray free-electron laser

Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance to the applications of laser plasma-based particle accelerators, creation of high energy-density matter, understanding of planetary science and laser-driven fusion energy. However, experimental efforts in this regime have been limited by the accessibility of over-critical density and spatio-temporal resolution of conventional diagnostics. Over the last decade, the advent of femtosecond brilliant hard X-ray free electron lasers (XFELs) is opening new horizons to break these limitations. Here, for the first time we present full-scale spatio-temporal measurements of solid-density plasma dynamics, including preplasma generation with tens of nanometer-scale length driven by the leading edge of a relativistic laser pulse, ultrafast heating and ionization at the main pulse arrival, laser-driven blast shock waves and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction. These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics such as small-angle X-ray scattering (SAXS), resonant X-ray emission spectroscopy (RXES), and propagation-based X-ray phase-contrast imaging (XPCI) simultaneously at the European XFEL-HED beamline station.

physics.plasm-ph↗

arXiv2024

(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering

Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.

physics.plasm-ph↗

arXiv2024

The importance of temperature-dependent collision frequency in PIC simulation on nanometric density evolution of highly-collisional strongly-coupled dense plasmas

Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D3V) PIC simulation that features the realistic collision frequency around the Fermi temperature and atomic-scale cell size. The results are compared with state-of-the-art experimental results as well as with hydrodynamic simulation. We found that the PIC simulation is capable of simulating the nanoscale dynamics of solid-density plasmas around the Fermi temperature up to $\sim$2~ps driven by a laser pulse at the moderate intensity of $10^{14-15}$~$\mathrm{W/cm^{2}}$, by comparing with the state-of-the-art experimental results. The reliability of the simulation can be further improved in the future by implementing multi-dimensional kinetics and radiation transport.

physics.plasm-ph↗

arXiv2024

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.

physics.plasm-ph↗

arXiv2024

Visualizing Plasmons and Ultrafast Kinetic Instabilities in Laser-Driven Solids using X-ray Scattering

Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Our experiments on laser-driven flat silicon membranes show the development of structure with a dominant scale of $~60\unit{nm}$ in the plane of the laser axis and laser polarization, and $~95\unit{nm}$ in the vertical direction with a growth rate faster than $0.1/\mathrm{fs}$. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced instability development, indicating the excitation of surface plasmons and the growth of a new type of filamentation instability. These findings provide new insight into the ultra-fast instability processes in solids under extreme conditions at the nanometer level with important implications for inertial confinement fusion and laboratory astrophysics.

physics.plasm-ph↗

arXiv2023

Probing the dynamics of solid density micro-wire targets after ultra-intense laser irradiation using a free-electron laser

In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this process are consistent with the presence of a sharp, propagating shock front inside the wire, moving at a speed close to the hole boring velocity.

physics.plasm-ph↗

arXiv2022

Heating in Multi-Layer Targets at ultra-high Intensity Laser Irradiation and the Impact of Density Oscillation

We present a computational study of isochoric heating in multi-layered targets at ultra-high intensity laser irradiation (approx. 10**20 W/cm**2). Previous studies have shown enhanced ion heating at interfaces, but at the cost of large temperature gradients. Here, we study multi-layered targets to spread this enhanced interface heating to the entirety of the target and find heating parameters at which the temperature distribution is more homogeneous than at a single interface while still exceeding the mean temperature of a non-layered target. Further, we identify a pressure oscillation that causes the layers to alternate between expanding and being compressed with non beneficial effect on the heating. Based on that, we derive an analytical model estimating the oscillation period to find target conditions that optimize heating and temperature homogeneity. This model can also be used to infer the plasma temperature from the oscillation period which can be measured e.g. by XFEL probing.

physics.plasm-ph↗

arXiv2022

Optimized laser ion acceleration at the relativistic critical density surface

In the effort of achieving high-energetic ion beams from the interaction of ultrashort laser pulses with a plasma, volumetric acceleration mechanisms beyond Target Normal Sheath Acceleration have gained attention. A relativisticly intense laser can turn a near critical density plasma slowly transparent, facilitating a synchronized acceleration of ions at the moving relativistic critical density front. While simulations promise extremely high ion energies in in this regime, the challenge resides in the realization of a synchronized movement of the ultra-relativistic laser pulse ($a_0\gtrsim 30$) driven reflective relativistic electron front and the fastest ions, which imposes a narrow parameter range on the laser and plasma parameters. We present an analytic model for the relevant processes, confirmed by a broad parameter simulation study in 1D- and 3D-geometry. By tayloring the pulse length plasma density profile at the front side, we can optimize the proton acceleration performance and extend the regions in parameter space of efficient ion acceleration at the relativistic relativistic density surface.

physics.plasm-ph↗

arXiv2021

Nanoscale subsurface dynamics of solids upon high-intensity laser irradiation observed by femtosecond grazing-incidence x-ray scattering

Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidification occur at picosecond and nanosecond time scales. Imaging methods, e.g. using x-ray free-electron lasers (XFEL), were hitherto unable to measure the depth-resolved subsurface dynamics of laser-solid interactions with appropriate temporal and spatial resolution. Here we demonstrate picosecond grazing-incidence small-angle x-ray scattering (GISAXS) from laser-produced plasmas using XFEL pulses. Using multi-layer (ML) samples, both the surface ablation and subsurface density dynamics are measured with nanometer depth resolution. Our experimental data challenges the state-of-the-art modeling of matter under extreme conditions and opens new perspectives for laser material processing and high-energy-density science.

physics.plasm-ph↗

arXiv2020

Probing ultrafast laser plasma processes inside solids with resonant small-angle X-ray scattering

Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray scattering (SAXS) patterns and their asymmetries occurring at X-ray energies of atomic bound-bound transitions contain information on the volumetric nanoscopic distribution of density, ionization and temperature. Buried heavy ion structures in high intensity laser irradiated solids expand on the nanometer scale following heat diffusion, and are heated to more than 2 million Kelvin. These experiments demonstrate resonant SAXS with the aim to better characterize dynamic processes in extreme laboratory plasmas.

physics.plasm-ph↗

arXiv2020

Spectral Control via Multi-Species Effects in PW-Class Laser-Ion Acceleration

Laser-ion acceleration with ultra-short pulse, PW-class lasers is dominated by non-thermal, intra-pulse plasma dynamics. The presence of multiple ion species or multiple charge states in targets leads to characteristic modulations and even mono-energetic features, depending on the choice of target material. As spectral signatures of generated ion beams are frequently used to characterize underlying acceleration mechanisms, thermal, multi-fluid descriptions require a revision for predictive capabilities and control in next-generation particle beam sources. We present an analytical model with explicit inter-species interactions, supported by extensive ab initio simulations. This enables us to derive important ensemble properties from the spectral distribution resulting from those multi-species effects for arbitrary mixtures. We further propose a potential experimental implementation with a novel cryogenic target, delivering jets with variable mixtures of hydrogen and deuterium. Free from contaminants and without strong influence of hardly controllable processes such as ionization dynamics, this would allow a systematic realization of our predictions for the multi-species effect.

physics.plasm-ph↗

arXiv2020

Spectral and spatial shaping of laser-driven proton beams using a pulsed high-field magnet beamline

Intense laser-driven proton pulses, inherently broadband and highly divergent, pose a challenge to established beamline concepts on the path to application-adapted irradiation field formation, particularly for 3D. Here we experimentally show the successful implementation of a highly efficient (50% transmission) and tuneable dual pulsed solenoid setup to generate a homogeneous (8.5% uniformity laterally and in depth) volumetric dose distribution (cylindrical volume of 5 mm diameter and depth) at a single pulse dose of 0.7 Gy via multi-energy slice selection from the broad input spectrum. The experiments have been conducted at the Petawatt beam of the Dresden Laser Acceleration Source Draco and were aided by a predictive simulation model verified by proton transport studies. With the characterised beamline we investigated manipulation and matching of lateral and depth dose profiles to various desired applications and targets. Using a specifically adapted dose profile, we successfully performed first proof-of-concept laser-driven proton irradiation studies of volumetric in-vivo normal tissue (zebrafish embryos) and in-vitro tumour tissue (SAS spheroids) samples.

physics.acc-ph↗

arXiv2019

On-Shot Characterization of Single Plasma Mirror Temporal Contrast Improvement

We report on the setup and commissioning of a compact recollimating single plasma mirror for temporal contrast enhancement at the Draco 150 TW laser during laser-proton acceleration experiments. The temporal contrast with and without plasma mirror is characterized single-shot by means of self-referenced spectral interferometry with extended time excursion (SRSI-ETE) at unprecedented dynamic and temporal range. This allows for the first single-shot measurement of the plasma mirror trigger point, which is interesting for the quantitative investigation of the complex pre-plasma formation process at the surface of the target used for proton acceleration. As a demonstration of high contrast laser plasma interaction we present proton acceleration results with ultra-thin liquid crystal targets of ~ 1 $μ$m down to 10 nm thickness. Focus scans of different target thicknesses show that highest proton energies are reached for the thinnest targets at best focus. This indicates that the contrast enhancement is effective such that the acceleration process is not limited by target pre-expansion induced by laser light preceding the main laser pulse.

physics.plasm-ph↗

arXiv2018

The new Felsenkeller 5 MV underground accelerator

The field of nuclear astrophysics is devoted to the study of the creation of the chemical elements. By nature, it is deeply intertwined with the physics of the Sun. The nuclear reactions of the proton-proton cycle of hydrogen burning, including the 3He(α,γ)7Be reaction, provide the necessary nuclear energy to prevent the gravitational collapse of the Sun and give rise to the by now well-studied pp, 7Be, and 8B solar neutrinos. The not yet measured flux of 13N, 15O, and 17F neutrinos from the carbon-nitrogen-oxygen cycle is affected in rate by the 14N(p,γ)15O reaction and in emission profile by the 12C(p,γ)13N reaction. The nucleosynthetic output of the subsequent phase in stellar evolution, helium burning, is controlled by the 12C(α,γ)16O reaction. In order to properly interpret the existing and upcoming solar neutrino data, precise nuclear physics information is needed. For nuclear reactions between light, stable nuclei, the best available technique are experiments with small ion accelerators in underground, low-background settings. The pioneering work in this regard has been done by the LUNA collaboration at Gran Sasso/Italy, using a 0.4 MV accelerator. The present contribution reports on a higher-energy, 5.0 MV, underground accelerator in the Felsenkeller underground site in Dresden/Germany. Results from γ-ray, neutron, and muon background measurements in the Felsenkeller underground site in Dresden, Germany, show that the background conditions are satisfactory for nuclear astrophysics purposes. The accelerator is in the commissioning phase and will provide intense, up to 50μA, beams of 1H+, 4He+ , and 12C+ ions, enabling research on astrophysically relevant nuclear reactions with unprecedented sensitivity.

physics.acc-ph↗