arXiv subjects

Thomas E. Ouldridge

Publications and source records attributed to Thomas E. Ouldridge.

At least 55 records · Page 3Linked to original sources

arXiv2015

Coarse-grained modelling of strong DNA bending II: Cyclization

DNA cyclization is a powerful technique to gain insight into the nature of DNA bending. The worm-like chain model provides a good description of small to moderate bending fluctuations, but some experiments on strongly-bent shorter molecules suggest enhanced flexibility over and above that expected from the worm-like chain. Here, we use a coarse-grained model of DNA to investigate the thermodynamics of DNA cyclization for molecules with less than 210 base pairs. As the molecules get shorter we find increasing deviations between our computed equilibrium j-factor and the worm-like chain predictions of Shimada and Yamakawa. These deviations are due to sharp kinking, first at nicks, and only subsequently in the body of the duplex. At the shortest lengths, substantial fraying at the ends of duplex domains is the dominant method of relaxation. We also estimate the dynamic j-factor measured in recent FRET experiments. We find that the dynamic j-factor is systematically larger than its equilibrium counterpart, with the deviation larger for shorter molecules, because not all the stress present in the fully cyclized state is present in the transition state. These observations are important for the interpretation of recent experiments, as only kinking within the body of the duplex is genuinely indicative of non-worm-like chain behaviour.

q-bio.BM↗

arXiv2015

Fundamental Limits to Cellular Sensing

In recent years experiments have demonstrated that living cells can measure low chemical concentrations with high precision, and much progress has been made in understanding what sets the fundamental limit to the precision of chemical sensing. Chemical concentration measurements start with the binding of ligand molecules to receptor proteins, which is an inherently noisy process, especially at low concentrations. The signaling networks that transmit the information on the ligand concentration from the receptors into the cell have to filter this noise extrinsic to the cell as much as possible. These networks, however, are also stochastic in nature, which means that they will also add noise to the transmitted signal. In this review, we will first discuss how the diffusive transport and binding of ligand to the receptor sets the receptor correlation time, and then how downstream signaling pathways integrate the noise in the receptor state; we will discuss how the number of receptors, the receptor correlation time, and the effective integration time together set a fundamental limit on the precision of sensing. We then discuss how cells can remove the receptor noise while simultaneously suppressing the intrinsic noise in the signaling network. We describe why this mechanism of time integration requires three classes of resources---receptors and their integration time, readout molecules, energy---and how each resource class sets a fundamental sensing limit. We also briefly discuss the scheme of maximum-likelihood estimation, the role of receptor cooperativity, and how cellular copy protocols differ from canonical copy protocols typically considered in the computational literature, explaining why cellular sensing systems can never reach the Landauer limit on the optimal trade-off between accuracy and energetic cost.

q-bio.MN↗

arXiv2015

Introducing Improved Structural Properties and Salt Dependence into a Coarse-Grained Model of DNA

We introduce an extended version of oxDNA, a coarse-grained model of DNA designed to capture the thermodynamic, structural and mechanical properties of single- and double-stranded DNA. By including explicit major and minor grooves, and by slightly modifying the coaxial stacking and backbone-backbone interactions, we improve the ability of the model to treat large (kilobase-pair) structures such as DNA origami which are sensitive to these geometric features. Further, we extend the model, which was previously parameterised to just one salt concentration ([Na$^+$]=0.5M), so that it can be used for a range of salt concentrations including those corresponding to physiological conditions. Finally, we use new experimental data to parameterise the oxDNA potential so that consecutive adenine bases stack with a different strength to consecutive thymine bases, a feature which allows a more accurate treatment of systems where the flexibility of single-stranded regions is important. We illustrate the new possibilities opened up by the updated model, oxDNA2, by presenting results from simulations of the structure of large DNA objects and by using the model to investigate some salt-dependent properties of DNA.

q-bio.BM↗

arXiv2015

Force-induced rupture of a DNA duplex

The rupture of double-stranded DNA under stress is a key process in biophysics and nanotechnology. In this article we consider the shear-induced rupture of short DNA duplexes, a system that has been given new importance by recently designed force sensors and nanotechnological devices. We argue that rupture must be understood as an activated process, where the duplex state is metastable and the strands will separate in a finite time that depends on the duplex length and the force applied. Thus, the critical shearing force required to rupture a duplex within a given experiment depends strongly on the time scale of observation. We use simple models of DNA to demonstrate that this approach naturally captures the experimentally observed dependence of the critical force on duplex length for a given observation time. In particular, the critical force is zero for the shortest duplexes, before rising sharply and then plateauing in the long length limit. The prevailing approach, based on identifying when the presence of each additional base pair within the duplex is thermodynamically unfavorable rather than allowing for metastability, does not predict a time-scale-dependent critical force and does not naturally incorporate a critical force of zero for the shortest duplexes. Additionally, motivated by a recently proposed force sensor, we investigate application of stress to a duplex in a mixed mode that interpolates between shearing and unzipping. As with pure shearing, the critical force depends on the time scale of observation; at a fixed time scale and duplex length, the critical force exhibits a sigmoidal dependence on the fraction of the duplex that is subject to shearing.

cond-mat.soft↗

arXiv2014

Characterizing the bending and flexibility induced by bulges in DNA duplexes

Advances in DNA nanotechnology have stimulated the search for simple motifs that can be used to control the properties of DNA nanostructures. One such motif, which has been used extensively in structures such as polyhedral cages, two-dimensional arrays, and ribbons, is a bulged duplex, that is two helical segments that connect at a bulge loop. We use a coarse-grained model of DNA to characterize such bulged duplexes. We find that this motif can adopt structures belonging to two main classes: one where the stacking of the helices at the center of the system is preserved, the geometry is roughly straight and the bulge is on one side of the duplex, and the other where the stacking at the center is broken, thus allowing this junction to act as a hinge and increasing flexibility. Small loops favor states where stacking at the center of the duplex is preserved, with loop bases either flipped out or incorporated into the duplex. Duplexes with longer loops show more of a tendency to unstack at the bulge and adopt an open structure. The unstacking probability, however, is highest for loops of intermediate lengths, when the rigidity of single-stranded DNA is significant and the loop resists compression. The properties of this basic structural motif clearly correlate with the structural behavior of certain nano-scale objects, where the enhanced flexibility associated with larger bulges has been used to tune the self-assembly product as well as the detailed geometry of the resulting nanostructures.

cond-mat.soft↗

arXiv2014

Modelling toehold-mediated RNA strand displacement

We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We study the rate of displacement reactions as a function of the length of the toehold and temperature and make two experimentally testable predictions: that the displacement is faster if the toehold is placed at the 5' end of the substrate and that the displacement slows down with increasing temperature for longer toeholds.

physics.bio-ph↗

arXiv2014

The robustness of proofreading to crowding-induced pseudo-processivity in the MAPK pathway

Double phosphorylation of protein kinases is a common feature of signalling cascades. This motif may reduce cross-talk between signalling pathways, as the second phosphorylation site allows for proofreading, especially when phosphorylation is distributive rather than processive. Recent studies suggest that phosphorylation can be `pseudo-processive' in the crowded cellular environment, as rebinding after the first phosphorylation is enhanced by slow diffusion. Here, we use a simple model with unsaturated reactants to show that specificity for one substrate over another drops as rebinding increases and pseudo-processive behavior becomes possible. However, this loss of specificity with increased rebinding is typically also observed if two distinct enzyme species are required for phosphorylation, i.e. when the system is necessarily distributive. Thus the loss of specificity is due to an intrinsic reduction in selectivity with increased rebinding, which benefits inefficient reactions, rather than pseudo-processivity itself. We also show that proofreading can remain effective when the intended signalling pathway exhibits high levels of rebinding-induced pseudo-processivity, unlike other proposed advantages of the dual phosphorylation motif.

q-bio.MN↗

arXiv2014

DNA nanotechnology: understanding and optimisation through simulation

DNA nanotechnology promises to provide controllable self-assembly on the nanoscale, allowing for the design of static structures, dynamic machines and computational architectures. In this article I review the state-of-the art of DNA nanotechnology, highlighting the need for a more detailed understanding of the key processes, both in terms of theoretical modelling and experimental characterisation. I then consider coarse-grained models of DNA, mesoscale descriptions that have the potential to provide great insight into the operation of DNA nanotechnology if they are well designed. In particular, I discuss a number of nanotechnological systems that have been studied with oxDNA, a recently developed coarse-grained model, highlighting the subtle interplay of kinetic, thermodynamic and mechanical factors that can determine behaviour. Finally, new results highlighting the importance of mechanical tension in the operation of a two-footed walker are presented, demonstrating that recovery from an unintended `overstepped' configuration can be accelerated by three to four orders of magnitude by application of a moderate tension to the walker's track. More generally, the walker illustrates the possibility of biasing strand-displacement processes to affect the overall rate.

cond-mat.soft↗

arXiv2014

The role of loop stacking in the dynamics of DNA hairpin formation

We study the dynamics of DNA hairpin formation using oxDNA, a nucleotide-level coarse-grained model of DNA. In particular, we explore the effects of the loop stacking interactions and non-native base pairing on the hairpin closing times. We find a non-monotonic variation of the hairpin closing time with temperature, in agreement with the experimental work of Wallace et al. [Proc. Nat. Acad. Sci. USA 2001, 98, 5584-5589]. The hairpin closing process involves the formation of an initial nucleus of one or two bonds between the stems followed by a rapid zippering of the stem. At high temperatures, typically above the hairpin melting temperature, an effective negative activation enthalpy is observed because the nucleus has a lower enthalpy than the open state. By contrast, at low temperatures, the activation enthalpy becomes positive mainly due to the increasing energetic cost of bending a loop that becomes increasingly highly stacked as the temperature decreases. We show that stacking must be very strong to induce this experimentally observed behavior, and that the existence of just a few weak stacking points along the loop can substantially suppress it. Non-native base pairs are observed to have only a small effect, slightly accelerating hairpin formation.

physics.bio-ph↗

arXiv2014

DNA hairpins primarily promote duplex melting rather than inhibiting hybridization

The effect of secondary structure on DNA duplex formation is poorly understood. We use a coarse-grained model of DNA to show that specific 3- and 4-base pair hairpins reduce hybridization rates by factors of 2 and 10 respectively, in good agreement with experiment. By contrast, melting rates are accelerated by factors of ~100 and ~2000. This surprisingly large speed-up occurs because hairpins form during the melting process, stabilizing partially melted states, and facilitating dissociation. These results may help guide the design of DNA devices that use hairpins to modulate hybridization and dissociation pathways and rates.

cond-mat.soft↗

arXiv2014

Plectoneme tip bubbles: Coupled denaturation and writhing in supercoiled DNA

Biological information is not only stored in the digital chemical sequence of double helical DNA, but is also encoded in the mechanical properties of the DNA strands, which can influence biochemical processes involving its readout. For example, loop formation in the Lac operon can regulate the expression of key genes, and DNA supercoiling is closely correlated to rhythmic circardian gene expression in cyanobacteria. Supercoiling is also important for large scale organisation of the genome in both eukaryotic and prokaryotic cells. DNA can respond to torsional stress by writhing to form looped structures called plectonemes, thus transferring energy stored as twist into energy stored in bending. Denaturation bubbles can also relax torsional stress, with the enthalpic cost of breaking bonds being compensated by their ability to absorb undertwist. Here we predict a novel regime where bubbles form at the tips of plectonemes, and study its properties using coarse-grained simulations. These tip bubbles can occur for both positive and negative supercoiling and greatly reduce plectoneme diffusion by a pinning mechanism. They can cause plectonemes to preferentially localise to AT rich regions, because bubbles more easily form there. The tip-bubble regime occurs for supercoiling densities and forces that are typically encountered for DNA in vivo, and may be exploited for biological control of genomic processes.

cond-mat.soft↗

arXiv2014

A nucleotide-level coarse-grained model of RNA

We present a new, nucleotide-level model for RNA, oxRNA, based on the coarse-graining methodology recently developed for the oxDNA model of DNA. The model is designed to reproduce structural, mechanical and thermodynamic properties of RNA, and the coarse-graining level aims to retain the relevant physics for RNA hybridization and the structure of single- and double-stranded RNA. In order to explore its strengths and weaknesses, we test the model in a range of nanotechnological and biological settings. Applications explored include the folding thermodynamics of a pseudoknot, the formation of a kissing loop complex, the structure of a hexagonal RNA nanoring, and the unzipping of a hairpin motif. We argue that the model can be used for efficient simulations of the structure of systems with thousands of base pairs, and for the assembly of systems of up to hundreds of base pairs. The source code implementing the model is released for public use.

physics.bio-ph↗

arXiv2013

Coarse-graining DNA for simulations of DNA nanotechnology

To simulate long time and length scale processes involving DNA it is necessary to use a coarse-grained description. Here we provide an overview of different approaches to such coarse graining, focussing on those at the nucleotide level that allow the self-assembly processes associated with DNA nanotechnology to be studied. OxDNA, our recently-developed coarse-grained DNA model, is particularly suited to this task, and has opened up this field to systematic study by simulations. We illustrate some of the range of DNA nanotechnology systems to which the model is being applied, as well as the insights it can provide into fundamental biophysical properties of DNA.

q-bio.BM↗

arXiv2013

DNA hybridization kinetics: zippering, internal displacement and sequence dependence

While the thermodynamics of DNA hybridization is well understood, much less is known about the kinetics of this classic system. Filling this gap in our understanding has new urgency because DNA nanotechnology often depends critically on binding rates. Here we use a coarse-grained model to explore the hybridization kinetics of DNA oligomers, finding that strand association proceeds through a complex set of intermediate states. Successful binding events start with the formation of a few metastable base-pairing interactions, followed by zippering of the remaining bonds. However, despite reasonably strong interstrand interactions, initial contacts frequently fail to lead to zippering because the typical configurations in which they form differ from typical states of similar enthalpy in the double-stranded equilibrium ensemble. Therefore, if the association process is analyzed on the base-pair (secondary structure) level, it shows non-Markovian behavior. Initial contacts must be stabilized by two or three base pairs before full zippering is likely, resulting in negative effective activation enthalpies. Non-Arrhenius behavior is observed as the number of base pairs in the effective transition state increases with temperature. In addition, we find that alternative pathways involving misbonds can increase association rates. For repetitive sequences, misaligned duplexes frequently rearrange to form fully paired duplexes by two distinct processes which we label `pseudoknot' and `inchworm' internal displacement. We show how the above processes can explain why experimentally observed association rates of GC-rich oligomers are higher than rates of AT-rich equivalents. More generally, we argue that association rates can be modulated by sequence choice.

cond-mat.soft↗

arXiv2013

Coarse-grained simulations of DNA overstretching

We use a recently developed coarse-grained model to simulate the overstretching of duplex DNA. Overstretching at 23C occurs at 74 pN in the model, about 6-7 pN higher than the experimental value at equivalent salt conditions. Furthermore, the model reproduces the temperature dependence of the overstretching force well. The mechanism of overstretching is always force-induced melting by unpeeling from the free ends. That we never see S-DNA (overstretched duplex DNA), even though there is clear experimental evidence for this mode of overstretching under certain conditions, suggests that S-DNA is not simply an unstacked but hydrogen-bonded duplex, but instead probably has a more exotic structure.

q-bio.BM↗

arXiv2012

Simulating a burnt-bridges DNA motor with a coarse-grained DNA model

We apply a recently-developed coarse-grained model of DNA, designed to capture the basic physics of nanotechnological DNA systems, to the study of a `burnt-bridges' DNA motor consisting of a single-stranded cargo that steps processively along a track of single-stranded stators. We demonstrate that the model is able to simulate such a system, and investigate the sensitivity of the stepping process to the spatial separation of stators, finding that an increased distance can suppress successful steps due to the build up of unfavourable tension. The mechanism of suppression suggests that varying the distance between stators could be used as a method for improving signal-to-noise ratios for motors that are required to make a decision at a junction of stators.

physics.bio-ph↗

arXiv2012

Inferring bulk self-assembly properties from simulations of small systems with multiple constituent species and small systems in the grand canonical ensemble

In this paper we generalize a methodology [T. E. Ouldridge, A. A. Louis, and J. P. K. Doye, J. Phys.: Condens. Matter {\bf 22}, 104102 (2010)] for dealing with the inference of bulk properties from small simulations of self-assembling systems of characteristic finite size. In particular, schemes for extrapolating the results of simulations of a single self-assembling object to the bulk limit are established in three cases: for assembly involving multiple particle species, for systems with one species localized in space and for simulations in the grand canonical ensemble. Furthermore, methodologies are introduced for evaluating the accuracy of these extrapolations. Example systems demonstrate that differences in cluster concentrations between simulations of a single self-assembling structure and bulk studies of the same model under identical conditions can be large, and that convergence on bulk results as system size is increased can be slow and non-trivial.

cond-mat.soft↗

arXiv2012

DNA cruciform arms nucleate through a correlated but non-synchronous cooperative mechanism

Inverted repeat (IR) sequences in DNA can form non-canonical cruciform structures to relieve torsional stress. We use Monte Carlo simulations of a recently developed coarse-grained model of DNA to demonstrate that the nucleation of a cruciform can proceed through a cooperative mechanism. Firstly, a twist-induced denaturation bubble must diffuse so that its midpoint is near the centre of symmetry of the IR sequence. Secondly, bubble fluctuations must be large enough to allow one of the arms to form a small number of hairpin bonds. Once the first arm is partially formed, the second arm can rapidly grow to a similar size. Because bubbles can twist back on themselves, they need considerably fewer bases to resolve torsional stress than the final cruciform state does. The initially stabilised cruciform therefore continues to grow, which typically proceeds synchronously, reminiscent of the S-type mechanism of cruciform formation. By using umbrella sampling techniques we calculate, for different temperatures and superhelical densities, the free energy as a function of the number of bonds in each cruciform along the correlated but non-synchronous nucleation pathways we observed in direct simulations.

q-bio.BM↗