arXiv subjects

Thomas Essinger-Hileman

Publications and source records attributed to Thomas Essinger-Hileman.

At least 19 recordsLinked to original sources

arXiv2026

Detectors for CLASS-W2: The second 90 GHz telescope of the Cosmology Large Angular Scale Surveyor

The Cosmology Large Angular Scale Surveyor (CLASS) is measuring the Cosmic Microwave Background (CMB) polarization anisotropy on the largest angular scales (>1 degree) to probe the epochs of inflation and reionization. To enhance the CMB mapping speed, we have built, tested, and commissioned in August 2025 a second 90 GHz receiver (CLASS-W2) with a detector focal plane composed of feedhorn-coupled Transition Edge Sensor (TES) bolometers fabricated at NIST-Boulder. The focal plane consists of four modules, each containing 37 feedhorns coupling orthogonal polarizations onto two TES bolometers, for a total of 296 optically sensitive detectors. Laboratory tests show highly uniform TES properties with an array average critical temperature of 184+-3 mK, a thermal conductance of 460+-47 pW/K, and a normal resistance of 7.8+-0.3 mOhms. The detector array has an average band center frequency of 95.2 GHz with 28.3 GHz bandwidth, and achieves a detector yield of 94%. On-sky measurements indicate a mean detector optical load of 3.3 pW, corresponding to an antenna temperature of ~23 K. The array's average beam solid angle is 124 $\mu$sr, with a full width at half maximum of 0.592 degrees, and the end-to-end average optical efficiency is 0.37. We find that high-frequency 'blue-leak' radiation couples directly to the TES bolometer islands; adding a metal-mesh low-pass filter with cutoff frequency of 157 GHz in front of the focal plane suppresses the 'blue-leak' power by 0.9 pW. The four-module array achieves a noise-equivalent temperature of NET= 16 uKrtS. Adding this array has boosted the CLASS 90 GHz mapping speed by 41%.

astro-ph.IM↗

arXiv2025

Spaceflight KID Readout Electronics for PRIMA

We present the design and testing of a prototype multiplexing kinetic inductance detector (KID) readout electronics for the PRobe far-Infrared Mission for Astrophysics (PRIMA) space mission. PRIMA is a Probe-class astrophysics mission concept that will answer fundamental questions about the formation of planetary systems, the co-evolution of stars and supermassive black holes in galaxies, and the rise of heavy elements and dust over cosmic time. The readout electronics for PRIMA must be compatible with operation at Earth-Sun L2 and capable of multiplexing more than 1000 detectors over 2.5 GHz bandwidth while consuming around 30 W per readout chain. The electronics must also be capable of switching between the two instruments, which have different readout bands: the hyperspectral imager (PRIMAger, 2.6-4.9 GHz) and the spectrometer (FIRESS, 0.4-2.4 GHz). The PRIMA readout electronics use high-heritage SpaceCube digital electronics with a build-to-print SpaceCube Mini v3.0 board using a radiation-tolerant Kintex KU060 field programmable gate array (FPGA) and a custom high-speed digitizer board, along with RF electronics that provide filtering and power conditioning. We present the driving requirements for the system, as well as the hardware, firmware, software, and system-level design that meets those requirements.

astro-ph.IM↗

arXiv2025

Readout of Microwave Kinetic Inductance Detector (MKID) Arrays for Habitable Worlds Observatory Using a Polyphase Filterbank Algorithm

The Habitable Worlds Observatory (HWO), a nextgeneration ultraviolet/optical/infrared space telescope, will require detector technologies capable of supporting substantially larger pixel-count arrays than those flown on previous missions. Microwave Kinetic Inductance Detectors (MKIDs) provide a scalable solution through microwave multiplexing and have already been demonstrated in balloon-borne instruments using Field-Programmable Gate Arrays (FPGAs) for real-time signal processing. A central element of MKID readout is the Polyphase Filter Bank (PFB) spectrometer, which converts digitized timedomain signals into finely resolved frequency channels for subsequent analysis. To meet the demands for broader bandwidths and higher spectral resolution driven by emerging science goals, efficient FPGA-based implementations of the PFB are essential. This work presents current results from a fixed-point digital design methodology for deploying the PFB architecture on spacequalified FPGAs. The approach emphasizes efficient resource utilization and numerical precision while satisfying stringent performance constraints, enabling scalable, high-resolution spectral processing for future space observatories and remote sensing applications.

astro-ph.IM↗

arXiv2025

KID Detector Readout Electronics Development for Habitable Worlds Observatory

We present the status and goals of the readout electronics system we are developing to support the detector arrays in the coronagraph instrument on the NASA Habitable Worlds Observatory (HWO) mission currently in development. HWO aims to revolutionize exoplanet exploration by performing direct imaging and spectroscopy of 25 or more habitable exoplanets, and to resolve a broad range of astrophysics science questions as well. Since exoplanet yield depends critically on the detector dark count rate, as we show in this paper, the ambitious goals of HWO require arrays of single-photon energy-resolving detectors. We argue that Kinetic Inductance Detectors (KIDs) are best suited to meet these requirements. To support the detectors required for HWO and future far-IR missions, at the required power consumption and detector count, we are developing a radiation-tolerant reconfigurable readout system for both imaging and energy-resolving single photon KID detector arrays. We leverage an existing RFSoC-based system we built for NASA balloons that has a power consumption of 30 Watts and reads out 2000-4000 detectors (i.e. 7-15 mW/pixel), and move to a radiation tolerant Kintex Ultrascale FPGA chip to bring low-power wide bandwidth readout to a space-qualified platform for the first time. This improves significantly over previous spaceflight systems, and delivers what is required for NASA's future needs: ~100,000 pixels with less than 1 kW total power consumption. Overall, the system we are developing is a significant step forward in capability, and retires many key risks for the Habitable Worlds Observatory mission.

astro-ph.IM↗

arXiv2025

PRIMA: PRIMAger, a far-infrared hyperspectral and polarimetric instrument

The PRobe far-Infrared Mission for Astrophysics (PRIMA) is an infrared observatory for the next decade, currently in Phase A, with a 1.8m telescope actively cooled to 4.5K. On board, an infrared camera, PRIMAger, equipped with ultra-sensitive kinetic inductance detector (KID) arrays, will provide observers with coverage of mid-infrared to far-infrared wavelengths from 24 to 264 microns. PRIMAger will offer two imaging modes: the Hyperspectral mode will cover the 24-84 microns wavelength range with a spectral resolution R=8, while the Polarimetric mode will provide polarimetric imaging in 4 broad bands, from 80 to 264 microns. These observational capabilities have been tailored to answer fundamental astrophysical questions such as black hole and star-formation co-evolution in galaxies, the evolution of small dust grains over a wide range of redshifts, and the effects of interstellar magnetic fields in various environments, as well as to open a vast discovery space with versatile photometric and polarimetric capabilities. PRIMAger is being developed by an international collaboration bringing together French institutes (Laboratoire d'Astrophysique de Marseille and CEA) through the center National d'Etudes Spatiales (CNES, France), the Netherlands Institute for Space Research (SRON, Netherlands), and the Cardiff University (UK) in Europe, as well as the Jet Propulsion Laboratory (JPL) and Goddard Space Flight Center (GSFC) in the USA.

astro-ph.IM↗

arXiv2025

Development of Space Qualified Signal Processing Readout Electronics for HabWorlds and Origins Space Telescope Detector and Arrays

The Habitable Worlds Observatory (HWO) -- a flagship ultraviolet/optical/infrared space telescope recommended by the National Academies' Pathways to Discovery in Astronomy and Astrophysics -- will require detector technologies capable of supporting significantly larger pixel-count arrays than previous missions. Microwave Kinetic Inductance Detectors (MKIDs), naturally suited to microwave multiplexing readout, are already in use across several balloon-borne missions with FPGA based systems. To transition this capability to space, we are developing a radiation-hardened detector readout system that builds directly on the technical and environmental requirements defined by the PRIMA mission. PRIMA serves as a critical pathfinder, informing the radiation tolerance, resource constraints, and on-board processing capabilities needed for HWO. In this work, we present our current results on algorithm implementation, hardware architecture, and firmware development using the radiation-hardened AMD Kintex Ultrascale FPGA, aligning with PRIMA's stringent specifications to ensure compatibility with future space-based observatories like HWO.

astro-ph.IM↗

arXiv2025

A Measurement of the Largest-Scale CMB E-mode Polarization with CLASS

We present measurements of large-scale cosmic microwave background (CMB) E-mode polarization from the Cosmology Large Angular Scale Surveyor (CLASS) 90 GHz data. Using 115 det-yr of observations collected through 2024 with a variable-delay polarization modulator, we achieved a polarization sensitivity of $78\,\mathrm{\mu K\,arcmin}$, comparable to Planck at similar frequencies (100 and 143 GHz). The analysis demonstrates effective mitigation of systematic errors and addresses challenges to large-angular-scale power recovery posed by time-domain filtering in maximum-likelihood map-making. A novel implementation of the pixel-space transfer matrix is introduced, which enables efficient filtering simulations and bias correction in the power spectrum using the quadratic cross-spectrum estimator. Overall, we achieved an unbiased time-domain filtering correction to recover the largest angular scale polarization, with the only power deficit, arising from map-making non-linearity, being characterized as less than $3\%$. Through cross-correlation with Planck, we detected the cosmic reionization at $99.4\%$ significance and measured the reionization optical depth $\tau=0.053^{+0.018}_{-0.019}$, marking the first ground-based attempt at such a measurement. At intermediate angular scales ($\ell>30$), our results, both independently and in cross-correlation with Planck, remain fully consistent with Planck's measurements.

astro-ph.CO↗

arXiv2024

TLS and Quasiparticle Loss in Thin-Film Aluminum CPW Resonators: A Modified Model and Design Implications

As superconducting kinetic inductance detectors (KIDs) continue to grow in popularity for sensitive submillimeter detection and other applications, there is a drive to advance toward lower-loss devices. We present measurements of diagnostic thin-film aluminum coplanar waveguide (CPW) resonators designed to inform ongoing KID development at NASA Goddard Space Flight Center. The resonance frequencies span $f_0$ = 3.5-4 GHz and include quarter-wave and half-wave resonators with varying coupling capacitor designs. We present measurements of the device film properties and an analysis of the dominant mechanisms of loss in the resonators measured in a dark environment, demonstrating quality factors of $Q_i^{-1} \approx 3.64-8.57\ \times 10^{-8}$. We observe an enhanced level of suppression in the loss contributions from two-level systems (TLS) at intermediate-to-high read powers, and a regime at these powers and low temperatures where contributions from intrinsic processes $Q_i^{-1}$,other dominate the total loss. We also observe deviations from the standard TLS loss model at low powers and temperatures below 60 mK, and use a modified model to describe this behavior.

physics.ins-det↗

arXiv2024

High-Efficiency and Low-Noise Detectors for the Upgraded CLASS 90 GHz Focal Plane

We present the in-lab and on-sky performance for the upgraded 90 GHz focal plane of the Cosmology Large Angular Scale Surveyor (CLASS), which had four of its seven detector wafers updated during the austral winter of 2022. The update aimed to improve the transition-edge-sensor (TES) stability and bias range and to realize the high optical efficiency of the sensor design. Modifications included revised circuit terminations, electrical contact between the TES superconductor and the normal metal providing the bulk of the bolometer's heat capacity, and additional filtering on the TES bias lines. The upgrade was successful: 94% of detectors are stable down to 15% of the normal resistance, providing a wide overlapping range of bias voltages for all TESs on a wafer. The median telescope efficiency improved from $0.42^{+0.15}_{-0.22}$ to $0.60^{+0.10}_{-0.32}$ (68% quantiles). For the four upgraded wafers alone, median telescope efficiency increased to $0.65^{+0.06}_{-0.06}$. Given our efficiency estimate for the receiver optics, this telescope efficiency implies a detector efficiency exceeding $0.90$. The overall noise-equivalent temperature of the 90 GHz focal plane improved from 19 $\mu$K$\sqrt{s}$ to 9.7 $\mu$K$\sqrt{s}$.

astro-ph.IM↗

arXiv2024

Sensitivity-Improved Polarization Maps at 40 GHz with CLASS and WMAP data

Improved polarization measurements at frequencies below 70 GHz with degree-level angular resolution are crucial for advancing our understanding of the Galactic synchrotron radiation and the potential polarized anomalous microwave emission and ultimately benefiting the detection of primordial $B$ modes. In this study, we present sensitivity-improved 40 GHz polarization maps obtained by combining the CLASS 40 GHz and WMAP $Q$-band data through a weighted average in the harmonic domain. The decision to include WMAP $Q$-band data stems from similarities in the bandpasses. Leveraging the accurate large-scale measurements from WMAP $Q$ band and the high-sensitivity information from CLASS 40 GHz band at intermediate scales, the noise level at $\ell\in[30, 100]$ is reduced by a factor of $2-3$ in the map space. A pixel domain analysis of the polarized synchrotron spectral index ($β_s$) using WMAP $K$ band and the combined maps (mean and 16/84th percentile across the $β_s$ map: $-3.08_{-0.20}^{+0.20}$) reveals a stronger preference for spatial variation (PTE for a uniform $β_s$ hypothesis smaller than 0.001) than the results obtained using WMAP $K$ and $Ka$ bands ($-3.08_{-0.14}^{+0.14}$). The cross-power spectra of the combined maps follow the same trend as other low-frequency data, and validation through simulations indicates negligible bias introduced by the combination method (sub-percent level in the power spectra). The products of this work are publicly available on $\mathtt{LAMBDA}$.

astro-ph.CO↗

arXiv2024

Cosmology Large Angular Scale Surveyor (CLASS): 90 GHz Telescope Pointing, Beam Profile, Window Function, and Polarization Performance

The Cosmology Large Angular Scale Surveyor (CLASS) is a telescope array that observes the cosmic microwave background (CMB) over ~75% of the sky from the Atacama Desert, Chile, at frequency bands centered near 40, 90, 150, and 220 GHz. CLASS measures the large angular scale CMB polarization to constrain the tensor-to-scalar ratio and the optical depth to last scattering. This paper presents the optical characterization of the 90GHz telescope, which has been observing since July 2018. Observations of the Moon establish the pointing while dedicated observations of Jupiter are used for beam calibration. The standard deviations of the pointing error in azimuth, elevation, and boresight angle are 1.3, 2.1, and 2.0 arcminutes, respectively, over the first 3 years of observations. This corresponds to a pointing uncertainty ~7% of the beam's full width at half maximum (FWHM). The effective azimuthally-symmetrized instrument 1D beam estimated at 90 GHz has an FWHM of 0.620+/-0.003 deg and a solid angle of 138.7+/-0.6(stats.)+/-1.1(sys.) usr integrated to a radius of 4 deg. The corresponding beam window function drops to b_ell^2 = 0.93, 0.71, 0.14 at ell = 30, 100, 300, respectively. Far-sidelobes are studied using detector-centered intensity maps of the Moon and measured to be at a level of 10^-3 or below relative to the peak. The polarization angle of Tau A estimated from preliminary survey maps is 149.6+/-0.2(stats.) deg in equatorial coordinates. The instrumental temperature-to-polarization (T-to-P) leakage fraction, inferred from per-detector demodulated Jupiter scan data, has a monopole component at the level of 1.7 x 10^-3, a dipole component with an amplitude of 4.3 x 10^-3, with no evidence of quadrupolar leakage.

astro-ph.IM↗

arXiv2024

Design and characterization of a 60-cm reflective half-wave plate for the CLASS 90 GHz band telescope

Front-end polarization modulation enables improved polarization measurement stability by modulating the targeted signal above the low-frequency $1/f$ drifts associated with atmospheric and instrumental instabilities and diminishes the impact of instrumental polarization. In this work, we present the design and characterization of a new 60-cm diameter Reflective Half-Wave Plate (RHWP) polarization modulator for the 90 GHz band telescope of the Cosmology Large Angular Scale Surveyor (CLASS) project. The RHWP consists of an array of parallel wires (diameter $50~\mathrm{μm}$, $175~\mathrm{μm}$ pitch) positioned $0.88~\mathrm{mm}$ from an aluminum mirror. In lab tests, it was confirmed that the wire resonance frequency ($f_\mathrm{res}$) profile is consistent with the target, $139~\mathrm{Hz}<f_\mathrm{res}<154~\mathrm{Hz}$ in the optically active region (diameter smaller than $150~\mathrm{mm}$), preventing the wire vibration during operation and reducing the RHWP deformation under the wire tension. The mirror tilt relative to the rotating axis was controlled to be $<15''$, corresponding to an increase in beam width due to beam smearing of $<0.6''$, negligible compared to the beam's full-width half-maximum of $36'$. The median and 16/84th percentile of the wire--mirror separation residual was $0.048^{+0.013}_{-0.014}~\mathrm{mm}$ in the optically active region, achieving a modulation efficiency $ε=96.2_{+0.5}^{-0.4}\%$ with an estimated bandpass of 34 GHz. The angular velocity of the RHWP was maintained to an accuracy of within $0.005\%$ at the nominal rotation frequency ($2.5~\mathrm{Hz}$). The RHWP has been successfully integrated into the CLASS 90 GHz telescope and started taking data in June 2024, replacing the previous modulator that has been in operation since June 2018.

astro-ph.IM↗

arXiv2024

Fabrication and characterization of optical filters from polymeric aerogels loaded with diamond scattering particles

We have developed a suite of infrared-blocking filters made by embedding diamond scattering particles in a polyimide aerogel substrate. We demonstrate the ability to tune the spectral performance of the filters based on both the composition of the base aerogel material and the properties of the scattering particles. We summarize the fabrication, optical modeling, and characterization of these filters. We investigate two polyimide base aerogel formulations and the effects of loading them with diamond scattering particles of varying sizes and relative densities. We describe a model for the filters' behavior using a combination of Maxwell Garnett and Mie Scattering techniques. We present optical characterization results for diamond-loaded aerogel filters with cutoff frequencies (50% transmittance) ranging between 2.5 and 15 THz, and confirm that the measured spectral performance is in agreement with our optical models. We also measure the filters' refractive index in the microwave and report findings in agreement with Maxwell Garnett model predictions (typically n < 1.08).

astro-ph.IM↗

arXiv2024

CLASS Angular Power Spectra and Map-Component Analysis for 40 GHz Observations through 2022

Measurement of the largest angular scale ($\ell < 30$) features of the cosmic microwave background (CMB) polarization is a powerful way to constrain the optical depth to reionization and search for the signature of inflation through the detection of primordial $B$-modes. We present an analysis of maps covering 73.6\% of the sky made from the $40\,\mathrm{GHz}$ channel of the Cosmology Large Angular Scale Surveyor (CLASS) from 2016 August to 2022 May. Taking advantage of the measurement stability enabled by front-end polarization modulation and excellent conditions from the Atacama Desert, we show this channel achieves higher sensitivity than the analogous frequencies from satellite measurements in the range $10 < \ell < 100$. Simulations show the CLASS linear (circular) polarization maps have a white noise level of $125 \,(130)\,\mathrm{μK\, arcmin}$. We measure the Galaxy-masked $EE$ and $BB$ spectra of diffuse synchrotron radiation and compare to space-based measurements at similar frequencies. In combination with external data, we expand measurements of the spatial variations of the synchrotron spectral energy density (SED) to include new sky regions and measure the diffuse SED in the harmonic domain. We place a new upper limit on a background of circular polarization in the range $5 < \ell < 125$ with the first bin showing $D_\ell < 0.023$ $\mathrm{μK^2_{CMB}}$ at 95\% confidence. These results establish a new standard for recovery of the largest-scale CMB polarization from the ground and signal exciting possibilities when the higher sensitivity and higher-frequency CLASS channels are included in the analysis.

astro-ph.CO↗

arXiv2023

CLASS Data Pipeline and Maps for 40 GHz Observations through 2022

The Cosmology Large Angular Scale Surveyor (CLASS) is a telescope array that observes the cosmic microwave background over 75\% of the sky from the Atacama Desert, Chile, at frequency bands centered near 40, 90, 150, and 220~GHz. This paper describes the CLASS data pipeline and maps for 40~GHz observations conducted from August 2016 to May 2022. We demonstrate how well the CLASS survey strategy, with rapid ($\sim10\,\mathrm{Hz}$) front-end modulation, recovers the large-scale Galactic polarization signal from the ground: the mapping transfer function recovers $\sim75$\% of $EE$, $BB$, and $VV$ power at $\ell=20$ and $\sim45$\% at $\ell=10$. We present linear and circular polarization maps over 75\% of the sky. Simulations based on the data imply the maps have a white noise level of $110\,\mathrm{μK\, arcmin}$ and correlated noise component rising at low-$\ell$ as $\ell^{-2.2}$. The transfer-function-corrected low-$\ell$ component is comparable to the white noise at the angular knee frequencies of $\ell\approx16$ (linear polarization) and $\ell\approx12$ (circular polarization). Finally, we present simulations of the level at which expected sources of systematic error bias the measurements, finding sub-percent bias for the $Λ\mathrm{CDM}$ $EE$ power spectra. Bias from $E$-to-$B$ leakage due to the data reduction pipeline and polarization angle uncertainty approaches the expected level for an $r=0.01$ $BB$ power spectrum. Improvements to the instrument calibration and the data pipeline will decrease this bias.

astro-ph.CO↗

arXiv2023

CLASS Observations of Atmospheric Cloud Polarization at Millimeter Wavelengths

The dynamic atmosphere imposes challenges to ground-based cosmic microwave background observation, especially for measurements on large angular scales. The hydrometeors in the atmosphere, mostly in the form of clouds, scatter the ambient thermal radiation and are known to be the main linearly polarized source in the atmosphere. This scattering-induced polarization is significantly enhanced for ice clouds due to the alignment of ice crystals under gravity, which are also the most common clouds seen at the millimeter-astronomy sites at high altitudes. This work presents a multifrequency study of cloud polarization observed by the Cosmology Large Angular Scale Surveyor (CLASS) experiment on Cerro Toco in the Atacama Desert of northern Chile, from 2016 to 2022, at the frequency bands centered around 40, 90, 150, and 220 GHz. Using a machine-learning-assisted cloud classifier, we made connections between the transient polarized emission found in all four frequencies with the clouds imaged by monitoring cameras at the observing site. The polarization angles of the cloud events are found to be mostly $90^\circ$ from the local meridian, which is consistent with the presence of horizontally aligned ice crystals. The 90 and 150 GHz polarization data are consistent with a power law with a spectral index of $3.90\pm0.06$, while an excess/deficit of polarization amplitude is found at 40/220 GHz compared with a Rayleigh scattering spectrum. These results are consistent with Rayleigh-scattering-dominated cloud polarization, with possible effects from supercooled water absorption and/or Mie scattering from a population of large cloud particles that contribute to the 220 GHz polarization.

astro-ph.IM↗

arXiv2023

Microwave Observations of Venus with CLASS

We report on the disk-averaged absolute brightness temperatures of Venus measured at four microwave frequency bands with the Cosmology Large Angular Scale Surveyor (CLASS). We measure temperatures of 432.3 $\pm$ 2.8 K, 355.6 $\pm$ 1.3 K, 317.9 $\pm$ 1.7 K, and 294.7 $\pm$ 1.9 K for frequency bands centered at 38.8, 93.7, 147.9, and 217.5 GHz, respectively. We do not observe any dependence of the measured brightness temperatures on solar illumination for all four frequency bands. A joint analysis of our measurements with lower frequency Very Large Array (VLA) observations suggests relatively warmer ($\sim$ 7 K higher) mean atmospheric temperatures and lower abundances of microwave continuum absorbers than those inferred from prior radio occultation measurements.

astro-ph.EP↗

arXiv2023

On-sky performance of new 90 GHz detectors for the Cosmology Large Angular Scale Surveyor (CLASS)

The Cosmology Large Angular Scale Surveyor (CLASS) is a polarization-sensitive telescope array located at an altitude of 5,200 m in the Chilean Atacama Desert and designed to measure the polarized Cosmic Microwave Background (CMB) over large angular scales. The CLASS array is currently observing with three telescopes covering four frequency bands: one at 40 GHz (Q); one at 90 GHz (W1); and one dichroic system at 150/220 GHz (HF). During the austral winter of 2022, we upgraded the first 90 GHz telescope (W1) by replacing four of the seven focal plane modules. These new modules contain detector wafers with an updated design, aimed at improving the optical efficiency and detector stability. We present a description of the design changes and measurements of on-sky optical efficiencies derived from observations of Jupiter.

astro-ph.IM↗