SearcharxivSearch

arXiv subjects

Thomas Hermans

Publications and source records attributed to Thomas Hermans.

11 recordsLinked to original sources

Uncertainty Quantification of the Fresh-Saltwater Interface from Time-Domain Electromagnetic Data

Geophysical methods provide a cost-effective way to characterize the subsurface for hydrogeological projects, but they rely on solving an inverse problem. Traditionally, deterministic approaches are used, which face challenges due to non-uniqueness. Stochastic methods offer uncertainty quantification but demand high computational resources. Bayesian Evidential Learning (BEL) bypasses full stochastic inversion by approximating the posterior distribution at lower cost. However, as with Monte Carlo techniques, efficiency depends on the number of inversion parameters. We show that incorporating prior knowledge into parameterization reduces unknowns and computational burden. Using time-domain electromagnetic data, we identify fresh - saltwater interfaces in the Flemish coastal aquifer. Conventional blocky or smooth deterministic inversions often misrepresent this transition zone as too sharp or too gradual. To address this, we parameterize the zone with two variables - depth and thickness - assuming a linear transition. This retains the compactness of parametric inversion while allowing sharp or gradual interfaces like voxel-based methods. To assess reliability, we invert these parameters stochastically using BEL with Thresholding (BEL1D-T). Results indicate this approach effectively captures uncertainty for synthetic and field data. The transition zone remains uncertain due to survey design and inherent non-uniqueness, yet our probabilistic method achieves this without the heavy computational cost of traditional stochastic approaches.

physics.geo-ph

Quantitative imaging of the fresh/saltwater interface with airborne electromagnetics: examining different sources of uncertainty

Knowing the distribution between fresh and saline groundwater is imperative for sustainable and integrated management of water resources in coastal areas. The airborne electromagnetic (AEM) method is increasingly used for hydrogeological mapping over large areas via bulk electrical resistivity. However, accurately and reliably mapping the fresh/saltwater interface (FSI) requires accurate knowledge about the transition zone. The objective is to quantify the uncertainty in using AEM data to inform on the depth of the FSI. The study mimics a dual-moment time-domain SkyTEM sounding recorded in the Belgian coastal plain based on borehole data. It quantifies uncertainty using a differential evolution adaptive Metropolis algorithm to sample the posterior distribution. The results indicate the importance of reliable altitude, pitch and roll logging. Gathering prior knowledge about the transition zone, for example, through borehole logs, significantly improves the estimation of the FSI. The Resolve frequency-domain system, especially in context with very shallow to shallow FSIs, is more suitable for salinity mapping than the time-domain SkyTEM used in the field survey. The depth of the FSI may be defined via various threshold values. The uncertainty of three different thresholds is studied. The FSI based on the middle of the transition zone is the most reliable, while the FSI based on the 1500 mg/L total dissolved solids threshold is the least robust.

physics.geo-ph

Ultra-soft liquid-ferrofluid interfaces

Soft interfaces are ubiquitous in nature, governing quintessential hydrodynamics functions, like lubrication, stability and cargo transport. It is shown here how a magnetic force field at a magnetic-nonmagnetic fluid interface results in an ultra-soft interface with nonlinear elasticity and tunable viscous shear properties. The balance between magnetic pressure, viscous stress and Laplace pressure results in a deformed and stable liquid-in-liquid tube with apparent elasticity in the range 2 kPa -10 kPa, possibly extended by a proper choice of liquid properties. Such highly deformable liquid-liquid interfaces of arbitrary shape with vanishing viscous shear open doors to unique microfluidic phenomena, biomaterial flows and complex biosystems mimicking.

cond-mat.soft

Scaling and flow profiles in magnetically confined liquid-in-liquid channels

Ferrofluids kept in place by permanent magnet quadrupoles can act as liquid walls to surround a second non-magnetic inside, resulting in a liquid fluidic channel with diameter size ranging from mm down to less than 10 micrometer. Micro particle tracking velocimetry (micro PTV) experiments and modeling show that near ideal plug flow is possible in such liquid-in-liquid channels due to the reduced friction at the walls. The measured fluids velocity profiles agree with the predictions of a hydrodynamic model of cylindrical symmetry with a minimal set of hypotheses. By introducing symmetry breaking elements in the system, we show how unique velocity and flow properties can be obtained. Our liquid-in-liquid confinement opens new possibilities for < 10 micrometer-sized microfluidics with low pressures and low shear, with flow characteristics not attainable in comparable solid-wall devices.

physics.flu-dyn

A multidimensional AI-trained correction to the 1D approximate model for Airborne TDEM sensing

The computational resources required to solve the full 3D inversion of time-domain electromagnetic data are immense. To overcome the time-consuming 3D simulations, we construct a surrogate model, more precisely, a data-driven statistical model to replace the 3D simulations. It is trained on 3D data and predicts the approximate output much faster. We construct a surrogate model that predicts the discrepancy between a 1D subsurface model and a deviation of the 1D assumption. The latter response is fastly computable with a semi-analytical 1D forward model. We exemplify the approach on a two-layered case. The results are encouraging even with few training samples. Given the computational cost related to the 3D simulations, there are limitations in the number of training samples that can be generated. In addition, certain applications require a wide range of parameters to be sampled, such as the electrical conductivity parameters in a saltwater intrusion case. The challenge of this work is achieving the best possible accuracy with only a few thousand samples. We propose to view the performance in terms of learning gain, representing the gain from the surrogate model whilst still acknowledging a residual discrepancy. Our works open new avenues for effectively simulating 3D TDEM data.

physics.geo-ph

Suppressing Rayleigh-Plateau Instability with a Magnetic Force Field for Deformable Interfaces Engineering

The Rayleigh-Plateau instability (RPI) is a classical hydrodynamics phenomenon that prevents a jet of liquid to flow indefinitely within air or another liquid. Here, we show how adding a magnetic force field makes possible its suppression. Enclosing the jet in a ferrofluid held by magnetic forces allows flow focusing without sheath flow, which completely avoids dripping failure at small flow rates and provides conditional stability for a continuous fluid jet. Highly deformable liquid interfaces withstanding spatial and time varying flow conditions within a large parameter space can be realized.

physics.flu-dyn

Novel Airborne EM Image Appraisal Tool for Imperfect Forward Modelling

Full 3D inversion of time-domain Airborne ElectroMagnetic (AEM) data requires specialists' expertise and a tremendous amount of computational resources, not readily available to everyone. Consequently, quasi-2D/3D inversion methods are prevailing, using a much faster but approximate (1D) forward model. We propose an appraisal tool that indicates zones in the inversion model that are not in agreement with the multidimensional data and therefore, should not be interpreted quantitatively. The image appraisal relies on multidimensional forward modelling to compute a so-called normalized gradient. Large values in that gradient indicate model parameters that do not fit the true multidimensionality of the observed data well and should not be interpreted quantitatively. An alternative approach is proposed to account for imperfect forward modelling, such that the appraisal tool is computationally inexpensive. The method is demonstrated on an AEM survey in a salinization context, revealing possible problematic zones in the estimated fresh-saltwater interface.

physics.geo-ph

Flexible quasi-2D inversion of time-domain AEM data, using a wavelet-based complexity measure

Regularization methods improve the stability of ill-posed inverse problems by introducing some a priori characteristics for the solution such as smoothness or sharpness. In this contribution, we propose a multidimensional, scale-dependent wavelet-based L1-regularization term to cure the ill-posedness of the airborne (time-domain) electromagnetic induction inverse problem. The regularization term is flexible, as it can recover blocky, smooth and tunable in-between inversion models, based on a suitable wavelet basis function. For each orientation, a different wavelet basis function can be used, introducing an additional relative regularization parameter. We propose a calibration method to determine (an educated initial guess for) this relative regularization parameter, which reduces the need to optimize for this parameter, and, consequently, the overall computation time is under control. We apply our novel scheme to a time-domain airborne electromagnetic data set in Belgian saltwater intrusion context, but the scheme could equally apply to any other 2D or 3D geophysical inverse problem.

physics.geo-ph

A new framework for experimental design using Bayesian Evidential Learning: the case of wellhead protection area

In this contribution, we predict the wellhead protection area (WHPA, target), the shape and extent of which is influenced by the distribution of hydraulic conductivity (K), from a small number of tracing experiments (predictor). Our first objective is to make stochastic predictions of the WHPA within the Bayesian Evidential Learning (BEL) framework, which aims to find a direct relationship between predictor and target using machine learning. This relationship is learned from a small set of training models (400) sampled from the prior distribution of K. The associated 400 pairs of simulated predictors and targets are obtained through forward modelling. Newly collected field data can then be directly used to predict the approximate posterior distribution of the corresponding WHPA. The uncertainty range of the posterior WHPA distribution is affected by the number and position of data sources (injection wells). Our second objective is to extend BEL to identify the optimal design of data source locations that minimizes the posterior uncertainty of the WHPA. This can be done explicitly, without averaging or approximating because once trained, the BEL model allows the computation of the posterior uncertainty corresponding to any new input data. We use the Modified Hausdorff Distance and the Structural Similarity index metrics to estimate the posterior uncertainty range of the WHPA. Increasing the number of injection wells effectively reduces the derived posterior WHPA uncertainty. Our approach can also estimate which injection wells are more informative than others, as validated through a k-fold cross-validation procedure. Overall, the application of BEL to experimental design makes it possible to identify the data sources maximizing the information content of any measurement data.

cs.LG

Inversion of electromagnetic induction data using a novel wavelet-based and scale-dependent regularization term

The inversion of electromagnetic induction data to a conductivity profile is an ill-posed problem. Regularization improves the stability of the inversion and, based on Occam's razor principle, a smoothing constraint is typically used. However, the conductivity profiles are not always expected to be smooth. Here, we develop a new inversion scheme in which we transform the model to the wavelet space and impose a sparsity constraint. This sparsity constrained inversion scheme will minimize an objective function with a least-squares data misfit and a sparsity measure of the model in the wavelet domain. A model in the wavelet domain has both temporal as spatial resolution, and penalizing small-scale coefficients effectively reduces the complexity of the model. Depending on the expected conductivity profile, an optimal wavelet basis function can be chosen. The scheme is thus adaptive. Finally, we apply this new scheme on a frequency domain electromagnetic sounding (FDEM) dataset, but the scheme could equally apply to any other 1D geophysical method.

physics.geo-ph

Deep generative models in inversion: a review and development of a new approach based on a variational autoencoder

When solving inverse problems in geophysical imaging, deep generative models (DGMs) may be used to enforce the solution to display highly structured spatial patterns which are supported by independent information (e.g. the geological setting) of the subsurface. In such case, inversion may be formulated in a latent space where a low-dimensional parameterization of the patterns is defined and where Markov chain Monte Carlo or gradient-based methods may be applied. However, the generative mapping between the latent and the original (pixel) representations is usually highly nonlinear which may cause some difficulties for inversion, especially for gradient-based methods. In this contribution we review the conceptual framework of inversion with DGMs and study the principal causes of the nonlinearity of the generative mapping. As a result, we identify a conflict between two goals: the accuracy of the generated patterns and the feasibility of gradient-based inversion. In addition, we show how some of the training parameters of a variational autoencoder, which is a particular instance of a DGM, may be chosen so that a tradeoff between these two goals is achieved and acceptable inversion results are obtained with a stochastic gradient-descent scheme. A test case using truth models with channel patterns of different complexity and cross-borehole traveltime tomographic data involving both a linear and a nonlinear forward operator is used to assess the performance of the proposed approach.

physics.geo-ph