arXiv subjects

Thomas I. Madura

Publications and source records attributed to Thomas I. Madura.

At least 19 recordsLinked to original sources

arXiv2025

The Aromatic Infrared Bands around the Wolf-Rayet Binary WR140 Revealed by JWST

We have analyzed the aromatic infrared bands (AIBs) in the 6-11.2 $μ$m range around the Wolf-Rayet binary WR140 (d=1.64 kpc) obtained with the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) Medium-Resolution Spectrometer (MRS). In WR140's circumstellar environment, we have detected AIBs at 6 $μ$m and 7.7 $μ$m which are attributed to C-C stretching modes. These features have been detected in the innermost dust shell (Shell1; ~2100 au from WR140), the subsequent dust shell (Shell2; ~5200 au), and ``off-shell'' regions in the MRS coverage. The 11.2 $μ$m AIB, which is associated with the C-H out-of-plane bending mode, has been tentatively detected in Shell2 and the surrounding off-shell positions around Shell2. We compared the AIB features from WR140 to spectra of established AIB feature classes A, B, C, and D. The detected features around WR140 do not agree with these established classes. The peak wavelengths and full width half maxima (FWHMs) of the 6 $μ$m and 7.7 $μ$m features are, however, consistent with those of R Coronae Borealis (RCB) stars with hydrogen-poor conditions. We discuss a possible structure of carbonaceous compounds and environments where they form around WR140. It is proposed that hydrogen-poor carbonaceous compounds initially originate from the carbon-rich WR wind, and the hydrogen-rich stellar wind from the companion O star may provide hydrogen to these carbonaceous compounds.

astro-ph.SR↗

arXiv2025

Dynamic Imprints of Colliding-wind Dust Formation from WR140

Carbon-rich Wolf-Rayet binaries are a prominent source of carbonaceous dust that contribute to the dust budget of galaxies. The "textbook" example of an episodic dust producing WR binary, WR140 (HD193793), provides us with an ideal laboratory for investigating the dust physics and kinematics in an extreme environment. This study is among the first to utilize two separate JWST observations, from Cycle 1 ERS (July 2022) and Cycle 2 (Sept. 2023), to measure WR140's dust kinematics and confirm its morphology. To measure the proper motions and projected velocities of the dust shells, we performed a novel PSF subtraction to reduce the effects of the bright diffraction spikes and carefully aligned the Cycle 2 to the Cycle 1 images. At 7.7 $μ$m, through the bright feature common to 16 dust shells (C1), we find an average dust shell proper motion of $390\pm29$ mas yr$^{-1}$, which equates to a projected velocity of $2714\pm188$ km s$^{-1}$ at a distance of 1.64 kpc. Our measured speeds are constant across all visible shells and consistent with previously reported dust expansion velocities. Our observations not only prove that these dusty shells are astrophysical (i.e., not associated with any PSF artifact) and originate from WR140, but also confirm the "clumpy" morphology of the dust shells, in which identifiable substructures within certain shells persist for at least 14 months from one cycle to the next. These results support the hypothesis that clumping in the wind collision region is required for dust production in WR binaries.

astro-ph.GA↗

arXiv2019

Non-thermal X-rays from Colliding Wind Shock Acceleration in the Massive Binary Eta Carinae

Cosmic-ray acceleration has been a long-standing mystery and despite more than a century of study, we still do not have a complete census of acceleration mechanisms. The collision of strong stellar winds in massive binary systems creates powerful shocks, which have been expected to produce high-energy cosmic-rays through Fermi acceleration at the shock interface. The accelerated particles should collide with stellar photons or ambient material, producing non-thermal emission observable in X-rays and gamma-rays. The supermassive binary star eta Carinae drives the strongest colliding wind shock in the solar neighborhood. Observations with non-focusing high-energy observatories indicate a high energy source near eta Carinae, but have been unable to conclusively identify eta Carinae as the source because of their relatively poor angular resolution. Here we present the first direct focussing observations of the non-thermal source in the extremely hard X-ray band, which is found to be spatially coincident with the star within several arc-seconds. These observations show that the source of non-thermal X-rays varies with the orbital phase of the binary, and that the photon index of the emission is similar to that derived through analysis of the gamma-ray spectrum. This is conclusive evidence that the high-energy emission indeed originates from non-thermal particles accelerated at colliding wind shocks.

astro-ph.HE↗

arXiv2019

Distinguishing Circumstellar from Stellar Photometric Variability in Eta Carinae

The interacting binary Eta Carinae remains one of the most enigmatic massive stars in our Galaxy despite over four centuries of observations. In this work, its light curve from the ultraviolet to the near-infrared is analysed using spatially resolved HST observations and intense monitoring at the La Plata Observatory, combined with previously published photometry. We have developed a method to separate the central stellar object in the ground-based images using HST photometry and applying it to the more numerous ground-based data, which supports the hypothesis that the central source is brightening faster than the almost-constant Homunculus. After detrending from long-term brightening, the light curve shows periodic orbital modulation ($ΔV$ $\sim$ 0.6 mag) attributed to the wind-wind collision cavity as it sweeps around the primary star and it shows variable projected area to our line-of-sight. Two quasi-periodic components with time scales of 2-3 and 8-10 yr and low amplitude, $ΔV$ $<$ 0.2 mag, are superimposed on the brightening light-curve, being the only stellar component of variability found, which indicates minimal stellar instability. Moreover, the light curve analysis shows no evidence of `shell ejections' at periastron. We propose that the long-term brightening of the stellar core is due to the dissipation of a dusty clump in front of the central star, which works like a natural coronagraph. Thus, the central stars appear to be more stable than previously thought since the dominant variability originates from a changing circumstellar medium. We predict that the brightening phase, due mainly to dust dissipation, will be completed around 2032 $\pm$ 4 yr, when the star will be brighter than in the 1600's by up to $ΔV$ $\sim$ 1 mag.

astro-ph.SR↗

arXiv2018

BRITE-Constellation reveals evidence for pulsations in the enigmatic binary $η$ Carinae

$η$ Car is a massive, eccentric binary with a rich observational history. We obtained the first high-cadence, high-precision light curves with the BRITE-Constellation nanosatellites over 6 months in 2016 and 6 months in 2017. The light curve is contaminated by several sources including the Homunculus nebula and neighboring stars, including the eclipsing binary CPD$-$59$^\circ$2628. However, we found two coherent oscillations in the light curve. These may represent pulsations that are not yet understood but we postulate that they are related to tidally excited oscillations of $η$ Car's primary star, and would be similar to those detected in lower-mass eccentric binaries. In particular, one frequency was previously detected by van Genderen et al. and Sterken et al. through the time period of 1974 to 1995 through timing measurements of photometric maxima. Thus, this frequency seems to have been detected for nearly four decades, indicating that it has been stable in frequency over this time span. These pulsations could help provide the first direct constraints on the fundamental parameters of the primary star if confirmed and refined with future observations.

astro-ph.SR↗

arXiv2016

A Case Study in Astronomical 3-D Printing: The Mysterious Eta Carinae

3-D printing moves beyond interactive 3-D graphics and provides an excellent tool for both visual and tactile learners, since 3-D printing can now easily communicate complex geometries and full color information. Some limitations of interactive 3-D graphics are also alleviated by 3-D printable models, including issues of limited software support, portability, accessibility, and sustainability. We describe the motivations, methods, and results of our work on using 3-D printing (1) to visualize and understand the Eta Car Homunculus nebula and central binary system and (2) for astronomy outreach and education, specifically, with visually impaired students. One new result we present is the ability to 3-D print full-color models of Eta Car's colliding stellar winds. We also demonstrate how 3-D printing has helped us communicate our improved understanding of the detailed structure of Eta Car's Homunculus nebula and central binary colliding stellar winds, and their links to each other. Attached to this article are full-color 3-D printable files of both a red-blue Homunculus model and the Eta Car colliding stellar winds at orbital phase 1.045. 3-D printing could prove to be vital to how astronomer's reach out and share their work with each other, the public, and new audiences.

astro-ph.IM↗

arXiv2016

The fossil wind structures of Eta Carinae: changes across on 5.54-year cycle

Eta Carinae, the closest, active, massive binary containing a highly unstable LBV, exhibits expanding, compressed wind shells, seen in emission, that are spatially and spectrally resolved by \hst/\stis. Starting in June 2009, these structures were mapped across its 5.54-year, highly elliptical, binary orbit to follow temporal changes in the light of [Fe~III] 4659Å and [Fe~II] 4815Å. The emissions trace portions of fossil wind-shells, that were formed by wind-wind interactions across each cycle. Over the high-ionization state, dense arcs, photo-ionized by far ultraviolet radiation from the hot secondary, are seen in [Fe~III]. Other arcs, ionized by mid-ultraviolet radiation from the primary star, are seen in [Fe II]. The [Fe III] structures tend to be interior to [Fe II] structures that trace extensive, less disturbed primary wind. During the brief periastron passage when the secondary plunges deep into the primary's extremely dense wind, on the far side of primary star, high-ionization [Fe III] structures fade and reappear in [Fe II]. Multiple fossil wind-structures were traced across the 5.7-year monitoring interval. The strong similarity of the expanding [Fe II] shells suggests that the wind and photo-ionization properties of the massive binary have not changed substantially from one orbit to the next over the past several orbital cycles. These observations trace structures that can be used to test three-dimensional hydrodynamical and radiative-transfer models of massive, interacting winds. They also provide a baseline for following future changes in Eta Carinae, especially of its winds and photoionization properties.

astro-ph.SR↗

arXiv2016

To $v_\infty$ and beyond! The He I absorption variability across the 2014.6 periastron passage of $η$ Carinae

We have monitored the massive binary star $η$ Carinae with the CTIO/SMARTS 1.5~m telescope and CHIRON spectrograph from the previous apastron passage of the system through the recent 2014.6 periastron passage. Our monitoring has resulted in a large, homogeneous data set with an unprecedented time-sampling, spectral resolving power, and signal-to-noise. This allowed us to investigate temporal variability previously unexplored in the system and discover a kinematic structure in the P Cygni absorption troughs of neutral helium wind lines. The features observed occurred prior to the periastron passage and are seen as we look through the trailing arm of the wind-wind collision shock cone. We show that the bulk of the variability is repeatable across the last five periastron passages, and that the absorption occurs in the inner 230 AU of the system. In addition, we found an additional, high-velocity absorption component super-imposed on the P Cygni absorption troughs that has been previously un-observed in these lines, but which bears resemblance to the observations of the He~I $λ$10830 Å feature across previous cycles. Through a comparison of the current smoothed particle hydrodynamical simulations, we show that the observed variations are likely caused by instabilities in the wind-wind collision region in our line-of-sight, coupled with stochastic variability related to clumping in the winds.

astro-ph.SR↗

arXiv2016

Modelling the Central Constant Emission X-ray component of eta Carinae

The X-ray emission of $η$ Carinae shows multiple features at various spatial and temporal scales. The central constant emission (CCE) component is centred on the binary and arises from spatial scales much smaller than the bipolar Homunculus nebula, but likely larger than the central wind--wind collision region between the stars as it does not vary over the $\sim$2-3 month X-ray minimum when it can be observed. Using large-scale 3D smoothed particle hydrodynamics (SPH) simulations, we model both the colliding-wind region between the stars, and the region where the secondary wind collides with primary wind ejected from the previous periastron passage. The simulations extend out to one hundred semimajor axes and make two limiting assumptions (strong coupling and no coupling) about the influence of the primary radiation field on the secondary wind. We perform 3D radiative transfer calculations on the SPH output to synthesize the X-ray emission, with the aim of reproducing the CCE spectrum. For the preferred primary mass-loss rate $\dot{M}_A\approx8.5\times10^{-4}$ M$_\odot$ yr$^{-1}$, the model spectra well reproduce the observation as the strong- and no-coupling spectra bound the CCE observation for longitude of periastron $ω\approx252^\circ$, and bound/converge on the observation for $ω\approx90^\circ$. This suggests that $η$ Carinae has moderate coupling between the primary radiation and secondary wind, that both the region between the stars and the comoving collision on the backside of the secondary generate the CCE, and that the CCE cannot place constraints on the binary's line of sight. We also discuss comparisons with common X-ray fitting parameters.

astro-ph.SR↗

arXiv2016

Eta Carinae's Thermal X-ray Tail Measured with XMM-Newton and NuSTAR

The evolved, massive highly eccentric binary system, eta Carinae, underwent a periastron passage in the summer of 2014. We obtained two coordinated X-ray observations with XMM-Newton and NuSTAR during the elevated X-ray flux state and just before the X-ray minimum flux state around this passage. These NuSTAR observations clearly detected X-ray emission associated with eta Car extending up to ~50 keV for the first time. The NuSTAR spectrum above 10 keV can be fit with the bremsstrahlung tail from a kT ~6 keV plasma. This temperature is Delta kT ~2 keV higher than those measured from the iron K emission line complex, if the shocked gas is in collisional ionization equilibrium. This result may suggest that the companion star's pre-shock wind velocity is underestimated. The NuSTAR observation near the X-ray minimum state showed a gradual decline in the X-ray emission by 40% at energies above 5 keV in a day, the largest rate of change of the X-ray flux yet observed in individual eta Car observations. The column density to the hardest emission component, NH ~1e24 cm-2, marked one of the highest values ever observed for eta Car, strongly suggesting increased obscuration of the wind-wind colliding X-ray emission by the thick primary stellar wind prior to superior conjunction. Neither observation detected the power-law component in the extremely hard band that INTEGRAL and Suzaku observed prior to 2011. If the non-detection by NuSTAR is caused by absorption, the power-law source must be small and located very near the WWC apex. Alternatively, it may be that the power-law source is not related to either eta Car or the GeV gamma-ray source.

astro-ph.SR↗

arXiv2015

3D hydrodynamical and radiative transfer modeling of Eta Carinae's colliding winds

We present results of full 3D hydrodynamical and radiative transfer simulations of the colliding stellar winds in the massive binary system Eta Carinae. We accomplish this by applying the SimpleX algorithm for 3D radiative transfer on an unstructured Voronoi-Delaunay grid to recent 3D smoothed particle hydrodynamics (SPH) simulations of the binary colliding winds. We use SimpleX to obtain detailed ionization fractions of hydrogen and helium, in 3D, at the resolution of the original SPH simulations. We investigate several computational domain sizes and Luminous Blue Variable primary star mass-loss rates. We furthermore present new methods of visualizing and interacting with output from complex 3D numerical simulations, including 3D interactive graphics and 3D printing. While we initially focus on Eta Car, the methods employed can be applied to numerous other colliding wind (WR 140, WR 137, WR 19) and dusty 'pinwheel' (WR 104, WR 98a) binary systems. Coupled with 3D hydrodynamical simulations, SimpleX simulations have the potential to help determine the regions where various observed time-variable emission and absorption lines form in these unique objects.

astro-ph.SR↗

arXiv2015

3D radiative transfer simulations of Eta Carinae's inner colliding winds - II: Ionization structure of helium at periastron

Spectral observations of the massive colliding wind binary Eta Carinae show phase-dependent variations, in intensity and velocity, of numerous helium emission and absorption lines throughout the entire 5.54-year orbit. Approaching periastron, the 3D structure of the wind-wind interaction region (WWIR) gets highly distorted due to the eccentric ($e \sim 0.9$) binary orbit. The secondary star ($η_{\mathrm{B}}$) at these phases is located deep within the primary's dense wind photosphere. The combination of these effects is thought to be the cause of the particularly interesting features observed in the helium lines at periastron. We perform 3D radiative transfer simulations of $η$ Car's interacting winds at periastron. Using the SimpleX radiative transfer algorithm, we post-process output from 3D smoothed particle hydrodynamic simulations of the inner 150 au of the $η$ Car system for two different primary star mass-loss rates ($\dot{M}_{η_{\mathrm{A}}}$). Using previous results from simulations at apastron as a guide for the initial conditions, we compute 3D helium ionization maps. We find that, for higher $\dot{M}_{η_{\mathrm{A}}}$, $η_{\mathrm{B}}$ He$^{0+}$-ionizing photons are not able to penetrate into the pre-shock primary wind. He$^{+}$ due to $η_{\mathrm{B}}$ is only present in a thin layer along the leading arm of the WWIR and in a small region close to the stars. Lowering $\dot{M}_{η_{\mathrm{A}}}$ allows $η_{\mathrm{B}}$'s ionizing photons to reach the expanding unshocked secondary wind on the apastron side of the system, and create a low fraction of He$^{+}$ in the pre-shock primary wind. With apastron on our side of the system, our results are qualitatively consistent with the observed variations in strength and radial velocity of $η$ Car's helium emission and absorption lines, which helps better constrain the regions where these lines arise.

astro-ph.SR↗

arXiv2015

3D Printing Meets Computational Astrophysics: Deciphering the Structure of Eta Carinae's Inner Colliding Winds

We present the first 3D prints of output from a supercomputer simulation of a complex astrophysical system, the colliding stellar winds in the massive (>120 M_Sun), highly eccentric (e ~ 0.9) binary star system Eta Carinae. We demonstrate the methodology used to incorporate 3D interactive figures into a PDF journal publication and the benefits of using 3D visualization and 3D printing as tools to analyze data from multidimensional numerical simulations. Using a consumer-grade 3D printer (MakerBot Replicator 2X), we successfully printed 3D smoothed particle hydrodynamics (SPH) simulations of Eta Carinae's inner (r ~ 110 au) wind-wind collision interface at multiple orbital phases. The 3D prints and visualizations reveal important, previously unknown 'finger-like' structures at orbital phases shortly after periastron (phi ~ 1.045) that protrude radially outward from the spiral wind-wind collision region. We speculate that these fingers are related to instabilities (e.g. thin-shell, Rayleigh-Taylor) that arise at the interface between the radiatively-cooled layer of dense post-shock primary-star wind and the fast (3000 km/s), adiabatic post-shock companion-star wind. The success of our work and easy identification of previously unrecognized physical features highlight the important role 3D printing and interactive graphics can play in the visualization and understanding of complex 3D time-dependent numerical simulations of astrophysical phenomena.

astro-ph.SR↗

arXiv2014

3D radiative transfer simulations of Eta Carinae's inner colliding winds - I. Ionization structure of helium at apastron

The highly eccentric binary system Eta Carinae shows numerous time-variable emission and absorption features. These observational signatures are the result of interactions between the complex three-dimensional (3D) wind-wind collision regions and photoionization by the luminous stars. Specifically, helium presents several interesting spectral features that provide important clues on the geometry and physical properties of the system and the individual stars. We use the SimpleX algorithm to post-process 3D smoothed particle hydrodynamics simulation output of the interacting winds in Eta Car in order to obtain the fractions of ionized helium assuming three different primary star mass-loss rates. The resultant ionization maps constrain the regions where helium is singly- and doubly-ionized. We find that reducing the primary's mass-loss rate increases the volume of He+. Lowering the primary mass-loss rate produces large variations in the volume of He+ in the pre-shock primary wind on the periastron side of the system. Our results show that binary orientations in which apastron is on our side of the system are more consistent with available observations. We suggest that small variations in the primary's mass-loss rate might explain the observed increase in HeI absorption in recent decades, although numerous questions regarding this scenario remain open. We also propose that the absence of broad HeI lines in the spectra of Eta Car between its 1890's eruption and 1944 might be explained by the companion star's He0+ ionizing photons not being able to penetrate the wind-wind interaction region, due to a higher primary mass-loss rate at that time (by a factor >2, compared to the present value).

astro-ph.SR↗

arXiv2014

Suzaku Monitoring of Hard X-ray Emission from Eta Carinae over a Single Binary Orbital Cycle

The Suzaku X-ray observatory monitored the supermassive binary system Eta Carinae 10 times during the whole 5.5 year orbital cycle between 2005-2011. This series of observations presents the first long-term monitoring of this enigmatic system in the extremely hard X-ray band between 15-40 keV. During most of the orbit, the 15-25 keV emission varied similarly to the 2-10 keV emission, indicating an origin in the hard energy tail of the kT ~4 keV wind-wind collision (WWC) plasma. However, the 15-25 keV emission declined only by a factor of 3 around periastron when the 2-10 keV emission dropped by two orders of magnitude due probably to an eclipse of the WWC plasma. The observed minimum in the 15-25 keV emission occurred after the 2-10 keV flux had already recovered by a factor of ~3. This may mean that the WWC activity was strong, but hidden behind the thick primary stellar wind during the eclipse. The 25-40 keV flux was rather constant through the orbital cycle, at the level measured with INTEGRAL in 2004. This result may suggest a connection of this flux component to the gamma-ray source detected in this field. The Helium-like Fe Kalpha line complex at ~6.7 keV became strongly distorted toward periastron as seen in the previous cycle. The 5-9 keV spectra can be reproduced well with a two-component spectral model, which includes plasma in collision equilibrium (CE) and a plasma in non-equilibrium ionization (NEI) with tau ~1e11 cm-3 s-1. The NEI plasma increases in importance toward periastron.

astro-ph.HE↗

arXiv2014

X-ray Emission from Eta Carinae near Periastron in 2009 I: A Two State Solution

X-ray emission from the supermassive binary system Eta Carinae declines sharply around periastron. This X-ray minimum has two distinct phases - the lowest flux phase in the first ~3 weeks and a brighter phase thereafter. In 2009, the Chandra X-ray Observatory monitored the first phase five times and found the lowest observed flux at ~1.9e-12 ergs cm-2 s-1 (3-8 keV). The spectral shape changed such that the hard band above ~4 keV dropped quickly at the beginning and the soft band flux gradually decreased to its lowest observed value in ~2 weeks. The hard band spectrum had begun to recover by that time. This spectral variation suggests that the shocked gas producing the hottest X-ray gas near the apex of the wind-wind collision (WWC) is blocked behind the dense inner wind of the primary star, which later occults slightly cooler gas downstream. Shocked gas previously produced by the system at earlier orbital phases is suggested to produce the faint residual X-ray emission seen when the emission near the apex is completely blocked by the primary wind. The brighter phase is probably caused by the re-appearance of the WWC plasma, whose emissivity significantly declined during the occultation. We interpret this to mean that the X-ray minimum is produced by a hybrid mechanism of an occultation and a decline in emissivity of the WWC shock.

astro-ph.SR↗

arXiv2013

Constraints on decreases in Eta Carinae's mass loss from 3D hydrodynamic simulations of its binary colliding winds

Recent work suggests that the mass-loss rate of the primary star (Eta A) in the massive colliding wind binary Eta Carinae dropped by a factor of 2-3 between 1999 and 2010. We present results from large- (r=1545au) and small- (r=155au) domain, 3D smoothed particle hydrodynamic (SPH) simulations of Eta Car's colliding winds for 3 Eta A mass-loss rates (2.4, 4.8, and 8.5 x 10^-4 M_sun/yr), investigating the effects on the dynamics of the binary wind-wind collision (WWC). These simulations include orbital motion, optically thin radiative cooling, and radiative forces. We find that Eta A's mass-loss rate greatly affects the time-dependent hydrodynamics at all spatial scales investigated. The simulations also show that the post-shock wind of the companion star (Eta B) switches from the adiabatic to the radiative-cooling regime during periastron passage. The SPH simulations together with 1D radiative transfer models of Eta A's spectra reveal that a factor of 2 or more drop in Eta A's mass-loss rate should lead to substantial changes in numerous multiwavelength observables. Recent observations are not fully consistent with the model predictions, indicating that any drop in Eta A's mass-loss rate was likely by a factor < 2 and occurred after 2004. We speculate that most of the recent observed changes in Eta Car are due to a small increase in the WWC opening angle that produces significant effects because our line-of-sight to the system lies close to the dense walls of the WWC zone. A modest decrease in Eta A's mass-loss rate may be responsible, but changes in the wind/stellar parameters of Eta B cannot yet be fully ruled out. We suggest observations during Eta Car's next periastron in 2014 to further test for decreases in Eta A's mass-loss rate. If Eta A's mass-loss rate is declining and continues to do so, the 2014 X-ray minimum should be even shorter than that of 2009.

astro-ph.SR↗

arXiv2012

A companion as the cause of latitude-dependent effects in the wind of Eta Carinae

We analyze spatially resolved spectroscopic observations of the Eta Carinae binary system obtained with HST/STIS. Eta Car is enshrouded by the dusty Homunculus nebula, which scatters light emitted by the central binary and provides a unique opportunity to study a massive binary system from different vantage points. We investigate the latitudinal and azimuthal dependence of H$α$ line profiles caused by the presence of a wind-wind collision (WWC) cavity created by the companion star. Using two-dimensional radiative transfer models, we find that the wind cavity can qualitatively explain the observed line profiles around apastron. Regions of the Homunculus which scatter light that propagated through the WWC cavity show weaker or no H alpha absorption. Regions scattering light that propagated through a significant portion of the primary wind show stronger P Cygni absorption. Our models overestimate the H alpha absorption formed in the primary wind, which we attribute to photoionization by the companion, not presently included in the models. We can qualitatively explain the latitudinal changes that occur during periastron, shedding light on the nature of Eta Car's spectroscopic events. Our models support the idea that during the brief period of time around periastron when the primary wind flows unimpeded toward the observer, H alpha absorption occurs in directions toward the central object and Homunculus SE pole, but not toward equatorial regions close to the Weigelt blobs. We suggest that observed latitudinal and azimuthal variations are dominated by the companion star via the WWC cavity, rather than by rapid rotation of the primary star.

astro-ph.SR↗