SearcharxivSearch

arXiv subjects

Thomas Johnson

Publications and source records attributed to Thomas Johnson.

15 recordsLinked to original sources

ChessMimic: Per-Rating Transformer Models for Human Move, Clock, and Outcome Prediction in Online Blitz Chess

We present ChessMimic, a system of three small encoder-only transformers - for move, thinking-time, and outcome prediction - conditioned on the position, recent move history, player rating, and clock state. We fit a separate instance of each model per 100-Elo rating band, trading parameter efficiency for sharper per-skill calibration. On a held-out month-wide slice of Lichess Rated Blitz games ChessMimic's human move prediction accuracy outperforms Maia-2 in every Elo band. Compared to Maia-3, our 9M parameter model's accuracy sits between Maia-3-5M and Maia-3-23M without the additional complexity of Geometric Attention Bias. In addition to the move matching model, we also train a game outcome model that conditions not only on the position, but also player ratings, time control, and remaining clock times. The outcome model achieves an AUC of 0.78 out of sample, beating Maia-2 as well as logistic regressions based on material, ratings, and clock time. Finally, we train a clock model that predicts human thinking times. The clock model provides a usable but non-SOTA per-ply think-time signal under ALLIE-style filters (Pearson r = 0.41, Spearman rho = 0.50, MAE 4.10 s, against ALLIE's reported r = 0.70), with the residual gap concentrated in per-position bucket sharpness rather than bucket-marginal calibration. A public demo is at 1e4.ai and we release code, per-band weights, and the C++ data-filter pipeline code in GitHub.

cs.LG

Direct evidence for the absence of coupling between shear strain and superconductivity in Sr2RuO4

The superconducting symmetry of Sr2RuO4 has been intensely debated for many years. A crucial controversy recently emerged between shear-mode ultrasound experiments, which suggest a two-component order parameter, and some uniaxial pressure experiments that suggest a one-component order parameter. To resolve this controversy, we use a new approach to directly apply three different kinds of shear strain to single crystals of Sr2RuO4 and investigate the coupling to superconductivity. After characterising the strain by optical imaging, we observe variations of the transition temperature Tc smaller than 10mK/% as measured by low-frequency magnetic susceptibility, indicating that shear strain has little to no coupling to superconductivity. Our results are consistent with a one-component order parameter model, but such a model cannot consistently explain other experimental evidence such as time-reversal symmetry breaking, superconducting domains, and horizontal line nodes, thus calling for alternative interpretations.

cond-mat.supr-con

Growth of ultra-clean single crystals of RuO2

We report the details of the growth of ultra-clean single crystals for RuO2, a candidate material for altermagnetism. By using a crystal-growth tube with a necking structure and precisely controlling the conditions of the sublimation transport method, it is possible to control the morphology of the crystals. We obtained crystals in mainly three kinds of morphology: thick plate-like crystals typically 5 x 3 x 2mm3 and up to 10 x 5 x 2mm3 with a large (101) facet, rhombohedral columnar crystals elongating along the [001] direction, and fiber and needle crystals of length up to 8 mm and the width of 0.1-0.4 mm. These crystals show residual resistivity of about 30 nOhmcm and a residual resistivity ratio (RRR) up to 1200. The crystals do not exhibit any signs of magnetic ordering down to low temperatures.

cond-mat.str-el

Charge order-driven nematicity in the nickel-pnictide superconductor Ba$_{1-x}$Sr$_x$Ni$_2$As$_2$

Nematic order refers to the spontaneous breaking of rotational symmetry while preserving translational symmetry. First identified in classical liquid crystals, nematic order arises from the collective alignment of anisotropic molecules. Its quantum counterpart, electronic nematicity, has been observed in a variety of quantum materials, ranging from unconventional superconductors to kagome metals. Despite its prevalence, there is no universal understanding of the conditions under which nematic order occurs. Electronic nematicity is most firmly established in iron-based superconductors, where it is understood to be a consequence of vestigial spin density wave (SDW) order. However, direct evidence for nematicity arising from other types of order are lacking. Here, we report direct evidence for charge-order-driven electronic nematicity in Ba$_{1-x}$Sr$_x$Ni$_2$As$_2$, a nickel-based analog of the iron pnictides known to exhibit charge density wave (CDW) order. Using x-ray diffraction under applied uniaxial strain, we observe a pronounced symmetry-breaking response-up to $\sim 50 \%$-in the intensity of incommensurate CDW Bragg peaks, even at small strain levels ($\epsilon_{xy} \sim 10^{-3}$). This effect occurs within the same region of the phase diagram where a giant nematic susceptibility is observed in transport measurements. These results provide direct evidence that long-range CDW order can drive nematic behavior in quantum materials.

cond-mat.str-el

Enviro-IoT: Calibrating Low-Cost Environmental Sensors in Urban Settings

Low-cost miniaturised sensors offer significant advantage to monitor the environment in real-time and accurately. The area of air quality monitoring has attracted much attention in recent years because of the increasing impacts on the environment and more personally to human health and mental wellbeing. Rapid growth in sensors and Internet of Things (IoT) technologies is paving the way for low-cost systems to transform global monitoring of air quality. Drawing on 4 years of development work, in this paper we outline the design, implementation and analysis of \textit{Enviro-IoT} as a step forward to monitoring air quality levels within urban environments by means of a low-cost sensing system. An in-the-wild study for 9-months was performed to evaluate the Enviro-IoT system against industry standard equipment is performed with accuracy for measuring Particulate Matter 2.5, 10 and Nitrogen Dioxide achieving 98\%, 97\% and 97\% respectively. The results in this case study are made up Of 57, 120 which highlight that it is possible to take advantage of low-cost sensors coupled with IoT technologies to validate the Enviro-IoT device against research-grade industrial instruments.

eess.SY

Mid-Range Wireless Power Transfer at 100 MHz using Magnetically-Coupled Loop-Gap Resonators

We describe efficient four-coil inductive power transfer (IPT) systems that operate at 100 MHz. The magnetically-coupled transmitter and receiver were made from electrically-small and high-Q loop-gap resonators (LGRs). In contrast to the commonly-used helical and spiral resonators, the LGR design has the distinct advantage that electric fields are strongly confined to the capacitive gap of the resonator. With negligible fringing electric fields in the surrounding space, the IPT system is immune to interference from nearby dielectric objects, even when they are in close proximity to the transmitter and/or receiver. We experimented with both cylindrical and split-toroidal LGR geometries. Although both systems performed well under laboratory conditions, the toroidal geometry has the additional advantage that the magnetic flux is weak everywhere except within the bore of the LGR and in the space directly between the transmitter and receiver. Furthermore, we show that the toroidal LGR system can be operated efficiently at a fixed frequency for a wide range of transmitter-receiver distances. The experimental results are complimented by 3-D finite-element simulations which were used to investigate the electromagnetic field profiles and surface current density distributions. Finally, we demonstrate the use of our IPT system at powers up to 32 W and discuss possible applications.

physics.app-ph

DigitalExposome: Quantifying the Urban Environment Influence on Wellbeing based on Real-Time Multi-Sensor Fusion and Deep Belief Network

In this paper, we define the term 'DigitalExposome' as a conceptual framework that takes us closer towards understanding the relationship between environment, personal characteristics, behaviour and wellbeing using multimodel mobile sensing technology. Specifically, we simultaneously collected (for the first time) multi-sensor data including urban environmental factors (e.g. air pollution including: PM1, PM2.5, PM10, Oxidised, Reduced, NH3 and Noise, People Count in the vicinity), body reaction (physiological reactions including: EDA, HR, HRV, Body Temperature, BVP and movement) and individuals' perceived responses (e.g. self-reported valence) in urban settings. Our users followed a pre-specified urban path and collected the data using a comprehensive sensing edge devices. The data is instantly fused, time-stamped and geo-tagged at the point of collection. A range of multivariate statistical analysis techniques have been applied including Principle Component Analysis, Regression and spatial visualisations to unravel the relationship between the variables. Results showed that EDA and Heart Rate Variability HRV are noticeably impacted by the level of Particulate Matters (PM) in the environment well with the environmental variables. Furthermore, we adopted Deep Belief Network to extract features from the multimodel data feed which outperformed Convolutional Neural Network and achieved up to (a=80.8%, {\sigma}=0.001) accuracy.

cs.LG

Runaway electron modelling in the self-consistent core European Transport Simulator, ETS

Relativistic runaway electrons are a major concern in tokamaks. The European framework for Integrated Modelling (EU-IM), facilitates the integration of different plasma simulation tools by providing a standard data structure for communication that enables relatively easy integration of different physics codes. A three-level modelling approach was adopted for runaway electron simulations within the EU-IM. Recently, a number of runaway electron modelling modules have been integrated into this framework. The first level of modelling (Runaway Indicator) is limited to the indication if runaway electron generation is possible or likely. The second level (Runaway Fluid) adopts an approach similar to e.g. the GO code, using analytical formulas to estimate changes in the runaway electron current density. The third level is based on the solution of the electron kinetics. One such code is LUKE that can handle the toroidicity-induced effects by solving the bounce-averaged Fokker-Planck equation. Another approach is used in NORSE, which features a fully nonlinear collision operator that makes it capable of simulating major changes in the electron distribution, for example slide-away. Both codes handle the effect of radiation on the runaway distribution. These runaway-electron modelling codes are in different stages of integration into the EU-IM infrastructure, and into the European Transport Simulator (ETS), which is a fully capable modular 1.5D core transport simulator. ETS with Runaway Fluid was benchmarked to the GO code implementing similar physics. Coherent integration of kinetic solvers requires more effort on the coupling, especially regarding the definition of the boundary between runaway and thermal populations, and on consistent calculation of resistivity. Some of these issues are discussed.

physics.plasm-ph

Sensor Data and the City: Urban Visualisation and Aggregation of Well-Being Data

The growth of mobile sensor technologies have made it possible for city councils to understand peoples' behaviour in urban spaces which could help to reduce stress around the city. We present a quantitative approach to convey a collective sense of urban places. The data was collected at a high level of granularity, navigating the space around a highly popular urban environment. We capture people's behaviour by leveraging continuous multi-model sensor data from environmental and physiological sensors. The data is also tagged with self-report, location coordinates as well as the duration in different environments. The approach leverages an exploratory data visualisation along with geometrical and spatial data analysis algorithms, allowing spatial and temporal comparisons of data clusters in relation to people's behaviour. Deriving and quantifying such meaning allows us to observe how mobile sensing unveils the emotional characteristics of places from such crowd-contributed content.

cs.HC

Calibrated Single-Contact Voltage Sensor for High-Voltage Monitoring Applications

A single-contact voltage sensor designed for accurate measurements of ac voltages across a pair of conductors is described. The sensor design is motivated by remote monitoring applications where accurate voltage measurement of high-voltage transmission lines is required. The body of the sensor is electrically and mechanically attached to a single conductor: either the neutral or high-voltage conductor. A capacitive sensing plate attached to the sensor creates a capacitive voltage divider using the stray capacitance to the non-contacted line. A very high-impedance buffer is used to measure the voltage across the divider output and estimate the line voltage. An important part of the work includes a method of calibrating the sensor such that blind voltage measurements can be made without knowing the exact geometry of the conductors. Other important aspects of the design include a two-stage voltage divider for retaining accuracy and increasing the voltage range of the sensor. The work is supported by extensive numerical simulation models which were used to determine the optimum design for the sensing plate and to evaluate the sensitivity to different configurations including conductor spacing and the height above ground. For calibration values which are accurate to 1%, the line voltage can be measured with an accuracy of 10%. The paper describes the theory, design, and experimental verification of the sensor up to a line voltage of 7.5 kVrms.

physics.ins-det

On the link between the Maxwell and linearised Einstein equations on Schwarzschild

In this short note we shall demonstrate that given a smooth solution $\gamma$ to the linearised Einstein equations on Schwarzschild which is supported on the $l\geq 2$ spherical harmonics and expressed relative to a transverse and traceless gauge then one can construct from it a smooth solution to the sourced Maxwell equations expressed relative to a generalised Lorentz gauge. Here the Maxwell current is constructed from those gauge-invariant combinations of the components of $\gamma$ which are determined by solutions to the Regge--Wheeler and Zerilli equations. The result thus provides an elegant link between the spin 1 and spin 2 equations on Schwarzschild.

gr-qc

On the linear stability of the Schwarzschild solution to gravitational perturbations in the generalised wave gauge

In a recent seminal paper \cite{D-H-R} of Dafermos, Holzegel and Rodnianski the linear stability of the Schwarzschild family of black hole solutions to the Einstein vacuum equations was established by imposing a double null gauge. In this paper we shall prove that the Schwarzschild family is linearly stable as solutions to the Einstein vacuum equations by imposing instead a generalised wave gauge: all sufficiently regular solutions to the system of equations that result from linearising the Einstein vacuum equations, as expressed in a generalised wave gauge, about a fixed Schwarzschild solution remain uniformly bounded on the Schwarzschild exterior region and in fact decay to a member of the linearised Kerr family. The dispersion is at an inverse polynomial rate and therefore in principle sufficient for future nonlinear applications. The result thus fits into the wider goal of establishing the full nonlinear stability of the exterior Kerr family as solutions to the Einstein vacuum equations by employing a generalised wave gauge and therefore complements \cite{D-H-R} in a similar vein as the pioneering work \cite{L-R} of Lindblad and Rodnianski complemented the monumental achievement of Christodoulou and Klainerman in \cite{C-K} whereby the global nonlinear stability of the Minkowski space was established.

gr-qc

The STAR MAPS-based PiXeL detector

The PiXeL detector (PXL) for the Heavy Flavor Tracker (HFT) of the STAR experiment at RHIC is the first application of the state-of-the-art thin Monolithic Active Pixel Sensors (MAPS) technology in a collider environment. Custom built pixel sensors, their readout electronics and the detector mechanical structure are described in detail. Selected detector design aspects and production steps are presented. The detector operations during the three years of data taking (2014-2016) and the overall performance exceeding the design specifications are discussed in the conclusive sections of this paper.

physics.ins-det

FOXTAIL: Modeling the nonlinear interaction between Alfv\'en eigenmodes and energetic particles in tokamaks

FOXTAIL is a new hybrid magnetohydrodynamic-kinetic code used to describe interactions between energetic particles and Alfv\'en eigenmodes in tokamaks with realistic geometries. The code simulates the nonlinear dynamics of the amplitudes of individual eigenmodes and of a set of discrete markers in five-dimensional phase space representing the energetic particle distribution. Action-angle coordinates of the equilibrium system are used for efficient tracing of energetic particles, and the particle acceleration by the wave fields of the eigenmodes is Fourier decomposed in the same angles. The eigenmodes are described using temporally constant eigenfunctions with dynamic complex amplitudes. Possible applications of the code are presented, e.g., making a quantitative validity evaluation of the one-dimensional bump-on-tail approximation of the system. Expected effects of the fulfillment of the Chirikov criterion in two-mode scenarios have also been verified.

physics.plasm-ph

Design and Fabrication of a Highly Integrated Silicon Detector for the STAR Experiment at Brookhaven National Laboratory

We present the design of a detector used as a particle tracking device in the STAR experiment at the RHIC collider of Brookhaven National Laboratories. The "stave," 24 of which make up the completed detector, is a highly mechanically integrated design comprised of 6 custom silicon sensors mounted on a Kapton substrate. 4608 wire bonds connect these sensors to 36 analog front-end chips which are mounted on the same substrate. Power and signal connectivity from the hybrid to the front-end chips is provided by wire bonds. The entire circuit is mounted on a carbon fiber base co-cured to the Kapton substrate. We present the unique design challenges for this detector and some novel techniques for overcoming them.

physics.ins-det