arXiv subjects

Thomas Koschny

Publications and source records attributed to Thomas Koschny.

At least 37 records · Page 2Linked to original sources

arXiv2014

Strong group velocity dispersion compensation with phase-engineered sheet metamaterials

Resonant metamaterials usually exhibit substantial dispersion, which is considered a shortcoming for many applications. Here we take advantage of the ability to tailor the dispersive response of a metamaterial introducing a new method of group-velocity dispersion compensation in telecommunication systems. The method consists of stacking a number of highly dispersive sheet metamaterials and is capable of compensating the dispersion of optical fibers with either negative or positive group-velocity dispersion coefficients. We demonstrate that the phase-engineered metamaterial can provide strong group-velocity dispersion management without being adversely affected by large transmission loss, while at the same time offering high customizability and small footprint.

physics.optics↗

arXiv2014

Large quality factor in sheet metamaterials made from dark dielectric meta-atoms

Metamaterials-or artificial electromagnetic materials-can create media with properties unattainable in nature, but mitigating dissipation is a key challenge for their further development. Here, we demonstrate a low-loss metamaterial by exploiting dark bound states in dielectric inclusions coupled to the external waves by small nonresonant metallic antennas. We experimentally demonstrate a dispersion-engineered metamaterial based on a meta-atom made from alumina, and we show that its resonance has a much larger quality factor than metal-based meta-atoms. Finally, we show that our dielectric meta-atom can be used to create sheet metamaterials with negative permittivity or permeability.

physics.optics↗

arXiv2014

Broadband terahertz generation from metamaterials

The terahertz spectral regime, ranging from about 0.1 to 15 THz, is one of the least explored yet most technologically transformative spectral regions. One current challenge is to develop efficient and compact terahertz emitters/detectors with a broadband and gapless spectrum that can be tailored for various pump photon energies. Here we demonstrate efficient single-cycle broadband THz generation, ranging from about 0.1 to 4 THz, from a thin layer of split-ring resonators with few tens of nanometers thickness by pumping at the telecommunications wavelength of 1.5 micrometer (200 THz). The terahertz emission arises from exciting the magnetic-dipole resonance of the split-ring resonators and quickly decreases under off-resonance pumping. This, together with pump polarization dependence and power scaling of the terahertz emission, identifies the role of optically induced nonlinear currents in split-ring resonators. We also reveal a giant sheet nonlinear susceptibility $\sim$10$^{-16}$ m$^2$V$^{-1}$ that far exceeds thin films and bulk non-centrosymmetric materials.

cond-mat.mes-hall↗

arXiv2013

Creating double negative index materials using the Babinet principle with one metasurface

Metamaterials are patterned metallic structures which permit access to a novel electromagnetic response, negative index of refraction, impossible to achieve with naturally occurring materials. Using the Babinet principle, the complementary split ring resonator (SRR) is etched in a metallic plate to provide negative ε, with perpendicular direction. Here we propose a new design, etched in a metallic plate to provide negative magnetic permeability μ, with perpendicular direction. The combined electromagnetic response of this planar metamaterial, where the negative μcomes from the aperture and the negative εfrom the remainder of the continuous metallic plate, allows achievement of a double negative index metamaterial (NIM) with only one metasurface and strong transmission. These designs can be used to fabricate NIMs at microwave and optical wavelengths and three-dimensional metamaterials.

cond-mat.mtrl-sci↗

arXiv2012

Electromagnetically Induced Transparency and Absorption in Metamaterials: The Radiating Two-Oscillator Model and Its Experimental Confirmation

Several classical analogues of electromagnetically induced transparency in metamaterials have been demonstrated. A simple two-resonator model can describe their absorption spectrum qualitatively, but fails to provide information about the scattering properties-e.g., transmission and group delay. Here we develop an alternative model that rigorously includes the coupling of the radiative resonator to the external electromagnetic fields. This radiating two-oscillator model can describe both the absorption spectrum and the scattering parameters quantitatively. The model also predicts metamaterials with a narrow spectral feature in the absorption larger than the background absorption of the radiative element. This classical analogue of electromagnetically induced absorption is shown to occur when both the dissipative loss of the radiative resonator and the coupling strength are small. These predictions are subsequently demonstrated in experiments.

physics.optics↗

arXiv2012

A comparison of graphene, superconductors and metals as conductors for metamaterials and plasmonics

Recent advancements in metamaterials and plasmonics have promised a number of exciting applications, in particular at terahertz and optical frequencies. Unfortunately, the noble metals used in these photonic structures are not particularly good conductors at high frequencies, resulting in significant dissipative loss. Here, we address the question of what is a good conductor for metamaterials and plasmonics. For resonant metamaterials, we develop a figure-of-merit for conductors that allows for a straightforward classification of conducting materials according to the resulting dissipative loss in the metamaterial. Application of our method predicts that graphene and high-Tc superconductors are not viable alternatives for metals in metamaterials. We also provide an overview of a number of transition metals, alkali metals and transparent conducting oxides. For plasmonic systems, we predict that graphene and high-Tc superconductors cannot outperform gold as a platform for surface plasmon polaritons, because graphene has a smaller propagation length-to-wavelength ratio.

cond-mat.mtrl-sci↗

arXiv2012

Effective material parameter retrieval for thin sheets: theory and application to graphene, thin silver films, and single-layer metamaterials

An important tool in the field of metamaterials is the extraction of effective material parameters from simulated or measured scattering parameters of a sample. Here we discuss a retrieval method for thin-film structures that can be approximated by a two-dimensional scattering sheet. We determine the effective sheet conductivity from the scattering parameters and we point out the importance of the magnetic sheet current to avoid an overdetermined inversion problem. Subsequently, we present two applications of the sheet retrieval method. First, we determine the effective sheet conductivity of thin silver films and we compare the resulting conductivities with the sheet conductivity of graphene. Second, we apply the method to a cut-wire metamaterial with an electric dipole resonance. The method is valid for thin-film structures such as two-dimensional metamaterials and frequency-selective surfaces and can be easily generalized for anisotropic or chiral media.

physics.optics↗

arXiv2012

Discontinuous design of negative index metamaterials based on mode hybridization

An electric inductor-capacitor (ELC) resonator provides a series of electrical resonances and a pair of ELC resonators leads to the split of each resonance into two modes, i.e., magnetic and electric modes, corresponding to antisymmetric and symmetric current distributions. With the meticulous design of the ELC resonator, we can achieve a negative index metamaterial through mode hybridization by overlapping the first electric resonance mode and the second magnetic resonance mode. Such non-connected designs may offer opportunities to achieve three-dimensional negative index metamaterials.

physics.optics↗

arXiv2012

Optical metamaterials with different metals

We investigate the influence of different metals on the electromagnetic response of fishnet metamaterials in the optical regime.We found, instead of using a Drude model, metals with a dielectric function from experimentally measured data should be applied to correctly predict the behavior of optical metamaterials. Through comparison of the performance for fishnet metamaterials made with different metals (i.e., gold, copper, and silver), we found silver is the best choice for the metallic parts compared to other metals, because silver allows for the strongest negative-permeability resonance and, hence, for optical fishnet metamaterials with a high figure-of-merit. Our study offers a valuable reference in the designs for optical metamaterials with optimized properties.

physics.optics↗

arXiv2012

Theory of pump-probe experiments of metallic metamaterials coupled to the gain medium

We establish a new approach for pump-probe simulations of metallic metamaterials coupled to the gain materials. It is of vital importance to understand the mechanism of the coupling of metamaterials with the gain medium. Using a four-level gain system, we have studied light amplification of arrays of metallic split-ring resonators (SRRs) with a gain layer underneath. We find that that the differential transmittance ΔT/T can be negative for SRRs on the top of the gain substrate, which is not expected, and ΔT/T is positive for the gain substrate alone. These simulations agree with pump-probe experiments and can help to design new experiments to compensate the losses of metamaterials.

physics.optics↗

arXiv2012

Switching nonlinearity in a superconductor-enhanced metamaterial

We demonstrate a nonlinear metamaterial that can be switched between low and high transmission by controlling the power level of the incident beam. The origin of this nonlinear response is the superconducting Nb thin film employed in the metamaterial structure. We show that with moderate RF power of about 22 dBm it is possible to quench the superconducting state as a result of extremely strong current densities at the corners of the metamaterial's split-ring resonators. We measure a transmission contrast of 10 dB and a change in group delay of 70 ns between the low and high power states.

cond-mat.mtrl-sci↗

arXiv2011

Application of metasurface description for multilayered metamaterials and an alternative theory for metamaterial perfect absorber

We analyze single and multilayered metamaterials by modeling each layer as a metasurface with effective surface electric and magnetic susceptibility derived through a thin film approximation. Employing a transfer matrix method, these metasurfaces can be assembled into multilayered metamaterials to realize certain functionalities. We demonstrate numerically that this approach provides an alternative interpretation of metamaterial-based perfect absorption, showing that the underlying mechanism is a modified Fabry-Perot resonance. This method provides a general approach applicable for decoupled or weakly coupled multilayered metamaterials.

physics.optics↗

arXiv2011

Classical Analogue of Electromagnetically Induced Transparency with a Metal-Superconductor Hybrid Metamaterial

Metamaterials are engineered materials composed of small electrical circuits producing novel interactions with electromagnetic waves. Recently, a new class of metamaterials has been created to mimic the behavior of media displaying electromagnetically induced transparency (EIT). Here we introduce a planar EIT metamaterial that creates a very large loss contrast between the dark and radiative resonators by employing a superconducting Nb film in the dark element and a normal-metal Au film in the radiative element. Below the critical temperature of Nb, the resistance contrast opens up a transparency window along with a large enhancement in group delay, enabling a significant slowdown of waves. We further demonstrate precise control of the EIT response through changes in the superfluid density. Such tunable metamaterials may be useful for telecommunication because of their large delay-bandwidth products.

cond-mat.supr-con↗

arXiv2011

Surface Plasmon Driven Electric and Magnetic Resonators for Metamaterials

Using interplay between surface plasmons and metamaterials, we propose a new technique for novel metamaterial designs. We show that surface plasmons existing on thin metal surfaces can be used to "drive" non-resonant structures in their vicinity to provide new types of electric and magnetic resonators. These resonators strictly adhere to surface plasmon dispersion of the host metal film. The operating frequency of the resultant metamaterials can be scaled to extremely high frequencies, otherwise not possible with conventional split-ring-resonator-based designs. Our approach opens new possibilities for theory and experiment in the interface of plasmonics and metamaterials to harvest many potential applications of both fields combined.

physics.optics↗

arXiv2010

Large group delay in a microwave metamaterial analogue of electromagnetically induced transparency

We report on our experimental work concerning a planar metamaterial exhibiting classical electromagnetically induced transparency (EIT). Using a structure with two mirrored split-ring resonators as the dark element and a cut wire as the radiative element, we demonstrate that an EIT-like resonance can be achieved without breaking the symmetry of the structure. The mirror symmetry of the metamaterial's structural element results in a selection rule inhibiting magnetic dipole radiation for the dark element, and the increased quality factor leads to low absorption (<10%) and large group index (of the order of 30).

cond-mat.mtrl-sci↗

arXiv2010

Planar designs for electromagnetically induced transparency in metamaterials

We present a planar design of a metamaterial exhibiting electromagnetically induced transparency that is amenable to experimental verification in the microwave frequency band. The design is based on the coupling of a split-ring resonator with a cut-wire in the same plane. We investigate the sensitivity of the parameters of the transmission window on the coupling strength and on the circuit elements of the individual resonators, and we interpret the results in terms of two linearly coupled Lorentzian resonators. Our metamaterial designs combine low losses with the extremely small group velocity associated with the resonant response in the transmission window, rendering them suitable for slow light applications at room temperature.

cond-mat.mtrl-sci↗

arXiv2010

Optical forces in nanowire pairs and metamaterials

We study the optical force arising when isolated gold nanowire pairs and metamaterials with a gold nanowire pair in the unit cell are illuminated with laser radiation. Firstly, we show that isolated nanowire pairs are subject to much stronger optical forces than nanospheres due to their stronger electric and magnetic dipole resonances. We also investigate the properties of the optical force as a function of the length of the nanowires and of the distance between the nanowires. Secondly, we study the optical force in a metamaterial that consists of a periodic array of nanowire pairs. We show that the ratio of the size of the unit cell to the length of the nanowires determines whether the electric dipole resonance leads to an attractive or a repulsive force, and we present the underlying physical mechanism for this effect.

cond-mat.mtrl-sci↗

arXiv2010

Chiral metamaterials with negative refractive index based on four "U" split ring resonators

A uniaxial chiral metamaterial is constructed by double-layered four "U" split ring resonators mutually twisted by 90 degrees. It shows a giant optical activity and circular dichroism. The retrieval results reveal that a negative refractive index is realized for circularly polarized waves due to the large chirality. The experimental results are in good agreement with the numerical results.

physics.optics↗