arXiv subjects

Thomas Kuhr

Publications and source records attributed to Thomas Kuhr.

At least 19 recordsLinked to original sources

arXiv2026

Shaping the Digital Future of ErUM Research: Sustainability & Ethics

This workshop report from "Shaping the Digital Future of ErUM Research: Sustainability & Ethics" (Aachen, 2025) reviews progress on sustainability measures in data-intensive ErUM-Data research since the 2023 call-to-action on resource-aware research. It evaluates short-, medium-, and long-term actions around monitoring and reducing CO2 emissions, improving data and software FAIRness, optimizing workflows and computing infrastructures, and aligning operations with low-carbon energy availability, including concepts such as "breathing" computing centers, long-term data storage strategies, and software efficiency certification. The report stresses the need for systematic teaching, training, mentoring, and new support formats to establish sustainable coding and computing practices, particularly among students and early-career researchers, and highlights the importance of dedicated steering and funding instruments to embed sustainability in project planning. Ethical discussions focus on the transformative use of AI in ErUM-Data, addressing autonomy, bias, transparency, explainability, attribution of responsibility, and the risk of deskilling, while reaffirming that accountability for scientific outcomes remains with human researchers. Finally, the report emphasizes that sustainable transformation requires not only technical measures but also targeted awareness-building, communication strategies, incentives, and community-driven initiatives to move from awareness to action and to integrate sustainability and ethics into everyday scientific practice.

physics.comp-ph↗

arXiv2026

Constraints on invisible $B^{+}\to K^{+} X$ decays from the Belle II $B^{+} \to K^{+} \nu \bar{\nu}$ measurement

The Belle II measurement of the branching fraction for $B^+\to K^+ \nu \bar \nu$ shows a $2.7\sigma$ excess over the Standard Model prediction and motivates new-physics explanations such as axion-like particles, Higgs-like scalars, or beyond Standard Model gauge bosons. A two-body decay $B^+\to K^+ X$ with an invisible $X$ provides a natural candidate explanation. This work provides a comprehensive test of this hypothesis using Belle II's public model-agnostic likelihood. Posterior distributions are derived for the resonance mass $m_X$ and the branching fraction, and a modified frequentist upper-limit mass scan is performed. The data favor a resonance with mass $m_X = 2.1^{+0.2}_{-0.1}$ GeV and the product $\mathcal{B}(B^+\to K^+ X) \cdot \mathcal{P}_{X,\rm inv} = 9.2^{+1.8}_{-3.4} \cdot 10^{-6}$, where $\mathcal{P}_{X,\rm inv}$ is the probability that $X$ (and its decay products) are undetected. Bayes factors indicate a very strong preference for the Standard Model plus resonance over the Standard Model-only hypothesis. A frequentist likelihood-ratio test favors the Standard Model plus resonance hypothesis by $3.0\sigma$. A light invisible resonance plus the Standard Model therefore provides a compelling description of the Belle II data.

hep-ph↗

arXiv2025

JENA Computing Initiative WP2 Report: Software and Heterogeneous Architectures

The scientific communities of nuclear, particle, and astroparticle physics are continuing to advance and are facing unprecedented software challenges due to growing data volumes, complex computing needs, and environmental considerations. As new experiments emerge, software and computing needs must be recognised and integrated early in design phases. This document synthesises insights from ECFA, NuPECC and APPEC, representing particle physics, nuclear physics, and astroparticle physics, and presents collaborative strategies for improving software, computing frameworks, infrastructure, and career development within these fields.

physics.comp-ph↗

arXiv2024

Ultra-High-Resolution Detector Simulation with Intra-Event Aware GAN and Self-Supervised Relational Reasoning

Simulating high-resolution detector responses is a computationally intensive process that has long been challenging in Particle Physics. Despite the ability of generative models to streamline it, full ultra-high-granularity detector simulation still proves to be difficult as it contains correlated and fine-grained information. To overcome these limitations, we propose Intra-Event Aware Generative Adversarial Network (IEA-GAN). IEA-GAN presents a Relational Reasoning Module that approximates an event in detector simulation, generating contextualized high-resolution full detector responses with a proper relational inductive bias. IEA-GAN also introduces a Self-Supervised intra-event aware loss and Uniformity loss, significantly enhancing sample fidelity and diversity. We demonstrate IEA-GAN's application in generating sensor-dependent images for the ultra-high-granularity Pixel Vertex Detector (PXD), with more than 7.5 M information channels at the Belle II Experiment. Applications of this work span from Foundation Models for high-granularity detector simulation, such as at the HL-LHC (High Luminosity LHC), to simulation-based inference and fine-grained density estimation. To our knowledge, IEA-GAN is the first algorithm for faithful ultra-high-granularity full detector simulation with event-based reasoning.

physics.ins-det↗

arXiv2024

Constructing model-agnostic likelihoods, a method for the reinterpretation of particle physics results

Experimental High Energy Physics has entered an era of precision measurements. However, measurements of many of the accessible processes assume that the final states' underlying kinematic distribution is the same as the Standard Model prediction. This assumption introduces an implicit model-dependency into the measurement, rendering the reinterpretation of the experimental analysis complicated without reanalysing the underlying data. We present a novel reweighting method in order to perform reinterpretation of particle physics measurements. It makes use of reweighting the Standard Model templates according to kinematic signal distributions of alternative theoretical models, prior to performing the statistical analysis. The generality of this method allows us to perform statistical inference in the space of theoretical parameters, assuming different kinematic distributions, according to a beyond Standard Model prediction. We implement our method as an extension to the pyhf software and interface it with the EOS software, which allows us to perform flavor physics phenomenology studies. Furthermore, we argue that, beyond the pyhf or HistFactory likelihood specification, only minimal information is necessary to make a likelihood model-agnostic and hence easily reinterpretable. We showcase that publishing such likelihoods is crucial for a full exploitation of experimental results.

hep-ph↗

arXiv2023

Resource-aware Research on Universe and Matter: Call-to-Action in Digital Transformation

Given the urgency to reduce fossil fuel energy production to make climate tipping points less likely, we call for resource-aware knowledge gain in the research areas on Universe and Matter with emphasis on the digital transformation. A portfolio of measures is described in detail and then summarized according to the timescales required for their implementation. The measures will both contribute to sustainable research and accelerate scientific progress through increased awareness of resource usage. This work is based on a three-days workshop on sustainability in digital transformation held in May 2023.

physics.comp-ph↗

arXiv2023

A Workflow Management System Guide

A workflow describes the entirety of processing steps in an analysis, such as employed in many fields of physics. Workflow management makes the dependencies between individual steps of a workflow and their computational requirements explicit, such that entire workflows can be executed in a stand-alone manner. Though the use of workflow management is widely recommended in the interest of transparency, reproducibility and data preservation, choosing among the large variety of available workflow management tools can be overwhelming. We compare selected workflow management tools concerning all relevant criteria and make recommendations for different use cases.

physics.data-an↗

arXiv2023

Improved selective background Monte Carlo simulation at Belle II with graph attention networks and weighted events

When measuring rare processes at Belle II, a huge luminosity is required, which means a large number of simulations are necessary to determine signal efficiencies and background contributions. However, this process demands high computation costs while most of the simulated data, in particular in case of background, are discarded by the event selection. Thus, filters using graph neural networks are introduced at an early stage to save the resources for the detector simulation and reconstruction of events discarded at analysis level. In our work, we improved the performance of the filters using graph attention and investigated statistical methods including sampling and reweighting to deal with the biases introduced by the filtering.

hep-ex↗

arXiv2023

PE-GAN: Prior Embedding GAN for PXD images at Belle II

The pixel vertex detector (PXD) is an essential part of the Belle II detector recording particle positions. Data from the PXD and other sensors allow us to reconstruct particle tracks and decay vertices. The effect of background hits on track reconstruction is simulated by adding measured or simulated background hit patterns to the hits produced by simulated signal particles. This model requires a large set of statistically independent PXD background noise samples to avoid a systematic bias of reconstructed tracks. However, data from the fine-grained PXD requires a substantial amount of storage. As an efficient way of producing background noise, we explore the idea of an on-demand PXD background generator using conditional Generative Adversarial Networks (GANs) with contrastive learning, adapted by the number of PXD sensors in order to both increase the image fidelity and produce sensor-dependent PXD hitmaps.

hep-ph↗

arXiv2022

Second Analysis Ecosystem Workshop Report

The second workshop on the HEP Analysis Ecosystem took place 23-25 May 2022 at IJCLab in Orsay, to look at progress and continuing challenges in scaling up HEP analysis to meet the needs of HL-LHC and DUNE, as well as the very pressing needs of LHC Run 3 analysis. The workshop was themed around six particular topics, which were felt to capture key questions, opportunities and challenges. Each topic arranged a plenary session introduction, often with speakers summarising the state-of-the art and the next steps for analysis. This was then followed by parallel sessions, which were much more discussion focused, and where attendees could grapple with the challenges and propose solutions that could be tried. Where there was significant overlap between topics, a joint discussion between them was arranged. In the weeks following the workshop the session conveners wrote this document, which is a summary of the main discussions, the key points raised and the conclusions and outcomes. The document was circulated amongst the participants for comments before being finalised here.

hep-ex↗

arXiv2022

Shared Data and Algorithms for Deep Learning in Fundamental Physics

We introduce a Python package that provides simply and unified access to a collection of datasets from fundamental physics research - including particle physics, astroparticle physics, and hadron- and nuclear physics - for supervised machine learning studies. The datasets contain hadronic top quarks, cosmic-ray induced air showers, phase transitions in hadronic matter, and generator-level histories. While public datasets from multiple fundamental physics disciplines already exist, the common interface and provided reference models simplify future work on cross-disciplinary machine learning and transfer learning in fundamental physics. We discuss the design and structure and line out how additional datasets can be submitted for inclusion. As showcase application, we present a simple yet flexible graph-based neural network architecture that can easily be applied to a wide range of supervised learning tasks. We show that our approach reaches performance close to dedicated methods on all datasets. To simplify adaptation for various problems, we provide easy-to-follow instructions on how graph-based representations of data structures, relevant for fundamental physics, can be constructed and provide code implementations for several of them. Implementations are also provided for our proposed method and all reference algorithms.

cs.LG↗

arXiv2021

Track Finding at Belle II

This paper describes the track-finding algorithm that is used for event reconstruction in the Belle II experiment operating at the SuperKEKB B-factory in Tsukuba, Japan. The algorithm is designed to balance the requirements of a high efficiency to find charged particles with a good track parameter resolution, a low rate of spurious tracks, and a reasonable demand on CPU resources. The software is implemented in a flexible, modular manner and employs a diverse selection of global and local track-finding algorithms to achieve an optimal performance.

physics.ins-det↗

arXiv2021

Publishing statistical models: Getting the most out of particle physics experiments

The statistical models used to derive the results of experimental analyses are of incredible scientific value and are essential information for analysis preservation and reuse. In this paper, we make the scientific case for systematically publishing the full statistical models and discuss the technical developments that make this practical. By means of a variety of physics cases -- including parton distribution functions, Higgs boson measurements, effective field theory interpretations, direct searches for new physics, heavy flavor physics, direct dark matter detection, world averages, and beyond the Standard Model global fits -- we illustrate how detailed information on the statistical modelling can enhance the short- and long-term impact of experimental results.

hep-ph↗

arXiv2021

Clustering of $\bar B\to D^{(*)}τ^-\barν_τ$ kinematic distributions with ClusterKinG

New Physics can manifest itself in kinematic distributions of particle decays. The parameter space defining the shape of such distributions can be large which is challenging for both theoretical and experimental studies. Using clustering algorithms, the parameter space can however be dissected into subsets (clusters) which correspond to similar kinematic distributions. Clusters can then be represented by benchmark points, which allow for less involved studies and a concise presentation of the results. We demonstrate this concept using the Python package ClusterKinG, an easy to use framework for the clustering of distributions that particularly aims to make these techniques more accessible in a High Energy Physics context. As an example we consider $\bar B\to D^{(*)}τ^-\barν_τ$ distributions and discuss various clustering methods and possible implications for future experimental analyses.

hep-ph↗

arXiv2020

User documentation and training at Belle II

Belle II is a rapidly growing collaboration with members from one hundred and nineteen institutes spread around the globe. The software development team of the experiment, as well as the software users, are very much decentralised. Together with the active development of the software, such decentralisation makes the adoption of the latest software releases by users an essential, but quite challenging task. To ensure the relevance of the documentation, we adopted the policy of in-code documentation and configured a website that allows us to tie the documentation to given releases. To prevent tutorials from becoming outdated, we covered them by unit-tests. For the user support, we use a question and answer service that not only reduces repetition of the same questions but also turned out to be a place for discussions among the experts. A prototype of a metasearch engine for the different sources of documentation has been developed. For training of the new users, we organise centralised StarterKit workshops attached to the collaboration meetings. The materials of the workshops are later used for self-education and organisation of local training sessions.

cs.CY↗

arXiv2020

Software for Online Reconstruction and Filtering at the Belle~II Experiment

The Belle II experiment is designed to collect 50 times more data than its predecessor. For a smooth collection of high-quality data, a robust and automated data transport and processing pipeline has been established. We describe the basic software components employed by the high level trigger. It performs a reconstruction of all events using the same algorithms as offline, classifies the events according to physics criteria, and provides monitoring information. The improved system described in this paper has been deployed successfully since 2019.

physics.ins-det↗

arXiv2019

HEP Software Foundation Community White Paper Working Group - Data Processing Frameworks

Data processing frameworks are an essential part of HEP experiments' software stacks. Frameworks provide a means by which code developers can undertake the essential tasks of physics data processing, accessing relevant inputs and storing their outputs, in a coherent way without needing to know the details of other domains. Frameworks provide essential core services for developers and help deliver a configurable working application to the experiments' production systems. Modern HEP processing frameworks are in the process of adapting to a new computing landscape dominated by parallel processing and heterogeneity, which pose many questions regarding enhanced functionality and scaling that must be faced without compromising the maintainability of the code. In this paper we identify a program of work that can help further clarify the key concepts of frameworks for HEP and then spawn R&D activities that can focus the community's efforts in the most efficient manner to address the challenges of the upcoming experimental program.

physics.comp-ph↗

arXiv2019

The Full Event Interpretation -- An exclusive tagging algorithm for the Belle II experiment

The Full Event Interpretation is presented: a new exclusive tagging algorithm used by the high-energy physics experiment Belle II. The experimental setup of Belle II allows the precise measurement of otherwise inaccessible $B$ meson decay-modes. The Full Event Interpretation algorithm enables many of these measurements. The algorithm relies on machine learning to automatically identify plausible $B$ meson decay chains based on the data recorded by the detector. Compared to similar algorithms employed by previous experiments, the Full Event Interpretation provides a greater efficiency, yielding a larger effective sample size usable in the measurement.

hep-ex↗