arXiv subjects

Thomas M. Stace

Publications and source records attributed to Thomas M. Stace.

At least 37 records · Page 2Linked to original sources

arXiv2019

Quantum Optical Metrology of Correlated Phase and Loss

Optical absorption measurements characterize a wide variety of systems from atomic gases to \emph{in-vivo} diagnostics of living organisms. Here we study the potential of non-classical techniques to reduce statistical noise below the shot-noise limit in absorption measurements with concomitant phase shifts imparted by a sample. We consider both cases where there is a known relationship between absorption and a phase shift, and where this relationship is unknown. For each case we derive the fundamental limit and provide a practical strategy to reduce statistical noise. Furthermore, we find an intuitive correspondence between measurements of absorption and of lossy phase shifts, which both show the same scope for precision enhancement. Our results demonstrate that non-classical techniques can aid real-world tasks with present-day laboratory techniques.

quant-ph↗

arXiv2019

Neutron star heating constraints on wave-function collapse models

Spontaneous wavefunction collapse models, like the Continuous Spontaneous Localization, are designed to suppress macroscopic superpositions, while preserving microscopic quantum phenomena. An observable consequence of collapse models is spontaneous heating of massive objects. Here we calculate the collapse-induced heating rate of astrophysical objects, and the corresponding equilibrium temperature. We apply these results to neutron stars, the densest phase of baryonic matter in the universe. Stronger collapse model parameters imply greater heating, allowing us to derive competitive bounds on model parameters using neutron star observational data, and to propose speculative bounds based on the capabilities of current and future astronomical surveys.

quant-ph↗

arXiv2018

Autonomous quantum heat engine using an electron shuttle

We propose an autonomous quantum heat engine based on the thermally driven oscillation of a single electron shuttle. The electronic degree of freedom of this device acts as an internal dynamical controller which switches the interaction of the engine with the thermal baths. We show that in addition to energy flux through the thermal baths, a flux of energy is attributed to the controller and it affects the engine power.

quant-ph↗

arXiv2018

Calderbank-Steane-Shor Holographic Quantum Error Correcting Codes

We expand the class of holographic quantum error correcting codes by developing the notion of block perfect tensors, a wider class that includes previously defined perfect tensors. The relaxation of this constraint opens up a range of other holographic codes. We demonstrate this by introducing the self-dual CSS heptagon holographic code, based on the 7-qubit Steane code. Finally we show promising thresholds for the erasure channel by applying a straightforward, optimal erasure decoder to the heptagon code and benchmark it against existing holographic codes.

quant-ph↗

arXiv2018

Quantum Thermometry

We discuss the application of techniques of quantum estimation theory and quantum metrology to thermometry. The ultimate limit to the precision at which the temperature of a system at thermal equilibrium can be determined is related to the heat capacity when global measurements are performed on the system. We prove that if technical or practical limitations restrict our capabilities to local probing, the highest achievable accuracy to temperature estimation reduces to a sort of mesoscopic version of the heat capacity. Adopting a more practical perspective, we also discuss the relevance of qubit systems as optimal quantum thermometers, in order to retrieve the temperature, or to discriminate between two temperatures, characterizing a thermal reservoir. We show that quantum coherence and entanglement in a probe system can facilitate faster, or more accurate measurements of temperature. While not surprising given this has been demonstrated in phase estimation, temperature is not a conventional quantum observable, so that these results extend the theory of parameter estimation to measurement of non-Hamiltonian quantities. Finally we point out the advantages brought by a less standard estimation technique based on sequential measurements, when applied to quantum thermometry.

quant-ph↗

arXiv2018

Nonreciprocity realized with quantum nonlinearity

Nonreciprocal devices are a key element for signal routing and noise isolation. Rapid development of quantum technologies has boosted the demand for a new generation of miniaturized and low-loss nonreciprocal components. Here we use a pair of tunable superconducting artificial atoms in a 1D waveguide to experimentally realize a minimal passive nonreciprocal device. Taking advantage of the quantum nonlinear behavior of artificial atoms, we achieve nonreciprocal transmission through the waveguide in a wide range of powers. Our results are consistent with theoretical modeling showing that nonreciprocity is associated with the population of the two-qubit nonlocal entangled quasi-dark state, which responds asymmetrically to incident fields from opposing directions. Our experiment highlights the role of quantum correlations in enabling nonreciprocal behavior and opens a path to building passive quantum nonreciprocal devices without magnetic fields.

quant-ph↗

arXiv2018

Breaking time-reversal symmetry with a superconducting flux capacitor

We present the design of a passive, on-chip microwave circulator based on a ring of superconducting tunnel junctions. We investigate two distinct physical realisations, based on either Josephson junctions (JJ) or quantum phase slip elements (QPS), with microwave ports coupled either capacitively (JJ) or inductively (QPS) to the ring structure. A constant bias applied to the center of the ring provides the symmetry breaking (effective) magnetic field, and no microwave or rf bias is required. We find that this design offers high isolation even when taking into account fabrication imperfections and environmentally induced bias perturbations and find a bandwidth in excess of 500 MHz for realistic device parameters.

quant-ph↗

arXiv2018

Fault-tolerant quantum computation with non-deterministic entangling gates

Performing entangling gates between physical qubits is necessary for building a large-scale universal quantum computer, but in some physical implementations - for example, those that are based on linear optics or networks of ion traps - entangling gates can only be implemented probabilistically. In this work, we study the fault-tolerant performance of a topological cluster state scheme with local non-deterministic entanglement generation, where failed entangling gates (which correspond to bonds on the lattice representation of the cluster state) lead to a defective three-dimensional lattice with missing bonds. We present two approaches for dealing with missing bonds; the first is a non-adaptive scheme that requires no additional quantum processing, and the second is an adaptive scheme in which qubits can be measured in an alternative basis to effectively remove them from the lattice, hence eliminating their damaging effect and leading to better threshold performance. We find that a fault-tolerance threshold can still be observed with a bond-loss rate of 6.5% for the non-adaptive scheme, and a bond-loss rate as high as 14.5% for the adaptive scheme.

quant-ph↗

arXiv2017

Nonreciprocal Atomic Scattering: A saturable, quantum Yagi-Uda antenna

Recent theoretical studies of a pair of atoms in a 1D waveguide find that the system responds asymmetrically to incident fields from opposing directions at low powers. Since there is no explicit time-reversal symmetry breaking elements in the device, this has caused some debate. Here we show that the asymmetry arises from the formation of a quasi-dark-state of the two atoms, which saturates at extremely low power. In this case the nonlinear saturability explicitly breaks the assumptions of the Lorentz reciprocity theorem. Moreover, we show that the statistics of the output field from the driven system can be explained by a very simple stochastic mirror model and that at steady state, the two atoms and the local field are driven to an entangled, tripartite $\left| W \right\rangle$ state. Because of this, we argue that the device is better understood as a saturable Yagi-Uda antenna, a distributed system of differentially-tuned dipoles that couples asymmetrically to external fields.

quant-ph↗

arXiv2017

Fault-tolerance thresholds for the surface code with fabrication errors

The construction of topological error correction codes requires the ability to fabricate a lattice of physical qubits embedded on a manifold with a non-trivial topology such that the quantum information is encoded in the global degrees of freedom (i.e. the topology) of the manifold. However, the manufacturing of large-scale topological devices will undoubtedly suffer from fabrication errors---permanent faulty components such as missing physical qubits or failed entangling gates---introducing permanent defects into the topology of the lattice and hence significantly reducing the distance of the code and the quality of the encoded logical qubits. In this work we investigate how fabrication errors affect the performance of topological codes, using the surface code as the testbed. A known approach to mitigate defective lattices involves the use of primitive SWAP gates in a long sequence of syndrome extraction circuits. Instead, we show that in the presence of fabrication errors the syndrome can be determined using the supercheck operator approach and the outcome of the defective gauge stabilizer generators without any additional computational overhead or the use of SWAP gates. We report numerical fault-tolerance thresholds in the presence of both qubit fabrication and gate fabrication errors using a circuit-based noise model and the minimum-weight perfect matching decoder. Our numerical analysis is most applicable to 2D chip-based technologies, but the techniques presented here can be readily extended to other topological architectures. We find that in the presence of 8% qubit fabrication errors, the surface code can still tolerate a computational error rate of up to 0.1%.

quant-ph↗

arXiv2017

Relational time in anyonic systems

In a seminal paper (Page and Wootters 1983) Page and Wootters suggest time evolution could be described solely in terms of correlations between systems and clocks, as a means of dealing with the "problem of time" stemming from vanishing Hamiltonian dynamics in many theories of quantum gravity. Their approach to relational time centres around the existence of a Hamiltonian and the subsequent constraint on physical states. In this paper we present a "state-centric" reformulation of the Page and Wootters model better suited to theories which intrinsically lack Hamiltonian dynamics, such as Chern--Simons theories. We describe relational time by encoding logical "clock" qubits into anyons---the topologically protected degrees of freedom in Chern--Simons theories. The timing resolution of such anyonic clocks is determined by the universality of the anyonic braid group, with non-universal models naturally exhibiting discrete time. We exemplify this approach using SU(2)$_2$ anyons and discuss generalizations to other states and models.

quant-ph↗

arXiv2017

Keldysh meets Lindblad: Correlated Gain and Loss in Higher-Order Perturbation Theory

Motivated by correlated decay processes producing gain, loss and lasing in driven semiconductor quantum-dots, we develop a theoretical technique using Keldysh diagrammatic perturbation theory to derive a Lindblad master equation that goes beyond the usual second order perturbation theory. We demonstrate the method on the driven dissipative Rabi model, including terms up to fourth order in the interaction between the qubit and both the resonator and environment. This results in a large class of Lindblad dissipators and associated rates which go beyond the terms that have previously been proposed to describe similar systems. All of the additional terms contribute to the system behaviour at the same order of perturbation theory. We then apply these results to analyse the phonon-assisted steady-state gain of a microwave field driving a double quantum-dot in a resonator. We show that resonator gain and loss are substantially affected by dephasing-assisted dissipative processes in the quantum-dot system. These additional processes, which go beyond recently proposed polaronic theories, are in good quantitative agreement with experimental observations.

quant-ph↗

arXiv2016

The effect of noise correlations on randomized benchmarking

Among the most popular and well studied quantum characterization, verification and validation techniques is randomized benchmarking (RB), an important statistical tool used to characterize the performance of physical logic operations useful in quantum information processing. In this work we provide a detailed mathematical treatment of the effect of temporal noise correlations on the outcomes of RB protocols. We provide a fully analytic framework capturing the accumulation of error in RB expressed in terms of a three-dimensional random walk in "Pauli space." Using this framework we derive the probability density function describing RB outcomes (averaged over noise) for both Markovian and correlated errors, which we show is generally described by a gamma distribution with shape and scale parameters depending on the correlation structure. Long temporal correlations impart large nonvanishing variance and skew in the distribution towards high-fidelity outcomes -- consistent with existing experimental data -- highlighting potential finite-sampling pitfalls and the divergence of the mean RB outcome from worst-case errors in the presence of noise correlations. We use the Filter-transfer function formalism to reveal the underlying reason for these differences in terms of effective coherent averaging of correlated errors in certain random sequences. We conclude by commenting on the impact of these calculations on the utility of single-metric approaches to quantum characterization, verification, and validation.

quant-ph↗

arXiv2015

Induced transparency in optomechanically coupled resonators

In this work we theoretically investigate a hybrid system of two optomechanically coupled resonators, which exhibits induced transparency. This is realized by coupling an optical ring resonator to a toroid. In the semiclassical analyses, the system displays bistabilities, isolated branches (isolas) and self-sustained oscillation dynamics. Furthermore, we find that the induced transparency transparency window sensitively relies on the mechanical motion. Based on this fact, we show that the described system can be used as a weak force detector and the optimal sensitivity can beat the standard quantum limit without using feedback control or squeezing under available experimental conditions.

quant-ph↗

arXiv2015

Detecting itinerant single microwave photons

Single photon detectors are fundamental tools of investigation in quantum optics and play a central role in measurement theory and quantum informatics. Photodetectors based on different technologies exist at optical frequencies and much effort is currently being spent on pushing their efficiencies to meet the demands coming from the quantum computing and quantum communication proposals. In the microwave regime however, a single photon detector has remained elusive although several theoretical proposals have been put forth. In this article, we review these recent proposals, especially focusing on non-destructive detectors of propagating microwave photons. These detection schemes using superconducting artificial atoms can reach detection efficiencies of 90\% with existing technologies and are ripe for experimental investigations.

quant-ph↗

arXiv2015

Quantum-Limited Spectroscopy

Spectroscopy has an illustrious history delivering serendipitous discoveries and providing a stringent testbed for new physical predictions, including applications from trace materials detection, to understanding the atmospheres of stars and planets, and even constraining cosmological models. Reaching fundamental-noise limits permits optimal extraction of spectroscopic information from an absorption measurement. Here we demonstrate a quantum-limited spectrometer that delivers high-precision measurements of the absorption lineshape. These measurements yield a ten-fold improvement in the accuracy of the excited-state (6P$_{1/2}$) hyperfine splitting in Cs, and reveals a breakdown in the well-known Voigt spectral profile. We develop a theoretical model that accounts for this breakdown, explaining the observations to within the shot-noise limit. Our model enables us to infer the thermal velocity-dispersion of the Cs vapour with an uncertainty of 35ppm within an hour. This allows us to determine a value for Boltzmann's constant with a precision of 6ppm, and an uncertainty of 71ppm.

physics.atom-ph↗

arXiv2014

Non-absorbing high-efficiency counter for itinerant microwave photons

Detecting an itinerant microwave photon with high efficiency is an outstanding problem in microwave photonics and its applications. We present a scheme to detect an itinerant microwave photon in a transmission line via the nonlinearity provided by a transmon in a driven microwave resonator. With a single transmon we achieve 84% distinguishability between zero and one microwave photons and 90% distinguishability with two cascaded transmons by performing continuous measurements on the output field of the resonator. We also show how the measurement diminishes coherence in the photon number basis thereby illustrating a fundamental principle of quantum measurement: the higher the measurement efficiency, the faster is the decoherence.

quant-ph↗

arXiv2014

Nano-Kelvin thermometry and temperature control: beyond the thermal noise limit

We demonstrate thermometry with a resolution of 80 $\mathrm{nK} / \sqrt{\mathrm{Hz}}$ using an isotropic crystalline whispering-gallery mode resonator based on a dichroic dual-mode technique. We simultaneously excite two modes that have a mode frequency ratio very close to two ($\pm0.3$ppm). The wavelength- and temperature-dependence of the refractive index means that the frequency difference between these modes is an ultra-sensitive proxy of the resonator temperature. This approach to temperature sensing automatically suppresses sensitivity to thermal expansion and vibrationally induced changes of the resonator. We also demonstrate active suppression of temperature fluctuations in the resonator by controlling the intensity of the driving laser. The residual temperature fluctuations are shown to be below the limits set by fundamental thermodynamic fluctuations of the resonator material.

physics.optics↗