arXiv subjects

Thomas M. Truskett

Publications and source records attributed to Thomas M. Truskett.

At least 37 records · Page 2Linked to original sources

arXiv2020

Universal Gelation of Metal Oxide Nanocrystals via Depletion Attractions

Nanocrystal gelation provides a powerful framework to translate nanoscale properties into bulk materials and to engineer emergent properties through the assembled microstructure. However, many established gelation strategies rely on chemical reactions and specific interactions, e.g., stabilizing ligands or ions on the surface of the nanocrystals, and are therefore not easily transferrable. Here, we report a general gelation strategy via non-specific and purely entropic depletion attractions applied to three types of metal oxide nanocrystals. The gelation thresholds of two compositionally distinct spherical nanocrystals agree quantitatively, demonstrating the adaptability of the approach for different chemistries. Consistent with theoretical phase behavior predictions, nanocrystal cubes form gels at a lower polymer concentration than nanocrystal spheres, allowing shape to serve as a handle to control gelation. These results suggest that the fundamental underpinnings of depletion-driven assembly, traditionally associated with larger colloidal particles, are also applicable at the nanoscale.

cond-mat.soft↗

arXiv2019

Structure and phase behavior of polymer-linked colloidal gels

Low-density "equilibrium" gels that consist of a percolated, kinetically arrested network of colloidal particles and are resilient to aging can be fabricated by restricting the number of effective bonds that form between the colloids. Valence-restricted patchy particles have long served as one archetypal example of such materials, but equilibrium gels can also be realized through a synthetically simpler and scalable strategy that introduces a secondary linker, such as a small ditopic molecule, to mediate the bonds between the colloids. Here, we consider the case where the ditopic linker molecules are low-molecular-weight polymers and demonstrate using a model colloid-polymer mixture how macroscopic properties such as the phase behavior as well as the microstructure of the gel can be designed through the polymer molecular weight and concentration. The low-density window for equilibrium gel formation is favorably expanded using longer linkers, while necessarily increasing the spacing between all colloids. However, we show that blends of linkers with different sizes enable wider variation in microstructure for a given target phase behavior. Our computational study suggests a robust and tunable strategy for the experimental realization of equilibrium colloidal gels.

cond-mat.soft↗

arXiv2019

The Role of Pressure in Inverse Design for Assembly

Isotropic pairwise interactions that promote the self assembly of complex particle morphologies have been discovered by inverse design strategies derived from the molecular coarse-graining literature. While such approaches provide an avenue to reproduce structural correlations, thermodynamic quantities such as the pressure have typically not been considered in self-assembly applications. In this work, we demonstrate that relative entropy optimization can be used to discover potentials that self-assemble into targeted cluster morphologies with a prescribed pressure when the iterative simulations are performed in the isothermal-isobaric ensemble. By tuning the pressure in the optimization, we generate a family of simple pair potentials that all self-assemble the same structure. Selecting an appropriate simulation ensemble to control the thermodynamic properties of interest is a general design strategy that could also be used to discover interaction potentials that self-assemble structures having, for example, a specified chemical potential.

cond-mat.stat-mech↗

arXiv2019

Design of nanoparticles for generation and stabilization of CO2-in-brine foams with or without added surfactants

Whereas many studies have examined stabilization of emulsions and foams in low salinity aqueous phases with nanoparticles (NPs) with and without added surfactants, interest has grown recently in much higher salinities relevant to subsurface oil and gas applications. It is shown for the first time that NPs grafted with well-defined low molecular weight ligands colloidally stable in concentrated brine (in particular, API brine, 8% NaCl + 2% CaCl2) and are interfacially active at the brine-air interface. These properties were achieved for three types of ligands: a nonionic diol called GLYMO and two short poly(ethylene glycol) (PEG) oligomers with 6-12 EO repeat units. Carbon dioxide-in-water (C/W) foams could be formed only with modified NPs with higher surface pressures at the A/W interface. Furthermore, these ligands were sufficiently CO2-philic that the hydrophilic/CO2-philic balance of silica NPs was low enough for stabilization of CO2-in-water (C/W) foam with API brine. Additionally, NPs with these three ligands formed stable dispersions with various free molecular surfactants in DI water and even API brine (8% NaCl + 2% CaCl2) at room temperature. A wide variety of mixtures of NPs plus anionic, nonionic, or cationic mixtures that formed stable dispersions were also found to stabilize C/W foams in porous media at high salinity. These results provide a basis for future studies of the mechanism of foam stabilization with NPs and NP/surfactant mixtures at high salinity.

cond-mat.soft↗

arXiv2019

Quantized bounding volume hierarchies for neighbor search in molecular simulations on graphics processing units

We present an algorithm for neighbor search in molecular simulations on graphics processing units (GPUs) based on bounding volume hierarchies (BVHs). The BVH is compressed into a low-precision, quantized representation to increase the BVH traversal speed compared to a previous implementation. We find that neighbor search using the quantized BVH is roughly two to four times faster than current state-of-the-art methods using uniform grids (cell lists) for a suite of benchmarks for common molecular simulation models. Based on the benchmark results, we recommend using the BVH instead of a single cell list for neighbor list generation in molecular simulations on GPUs.

physics.comp-ph↗

arXiv2019

Assembly of particle strings via isotropic potentials

Assembly of spherical colloidal particles into extended structures, including linear strings, in the absence of directional interparticle bonding interactions or external perturbation could facilitate the design of new functional materials. Here, we use methods of inverse design to discover isotropic pair potentials that promote the formation of single-stranded, polydisperse strings of colloids "colloidomers" as well as size-specific, compact colloidal clusters. Based on the designed potentials, a simple model pair interaction with a short-range attraction and a longer-range repulsion is proposed which stabilizes a variety of different particle morphologies including (i) dispersed fluid of monomers, (ii) ergodic short particle chains as well as porous networks of percolated strings, (iii) compact clusters, and (iv) thick cylindrical structures including trihelical Bernal spirals.

cond-mat.soft↗

arXiv2018

Cross-stream migration of a Brownian droplet in a polymer solution under Poiseuille flow

The migration of a Brownian fluid droplet in a parallel-plate microchannel was investigated using dissipative particle dynamics computer simulations. In a Newtonian solvent, the droplet migrated toward the channel walls due to inertial effects at the studied flow conditions, in agreement with theoretical predictions and recent simulations. However, the droplet focused onto the channel centerline when polymer chains were added to the solvent. Focusing was typically enhanced for longer polymers and higher polymer concentrations with a nontrivial flow-rate dependence due to droplet and polymer deformability. Brownian motion caused the droplet position to fluctuate with a distribution that primarily depended on the balance between inertial lift forces pushing the droplet outward and elastic forces from the polymers driving it inward. The droplet shape was controlled by the local shear rate, and so its average shape depended on the droplet distribution.

cond-mat.soft↗

arXiv2018

From Close-Packed to Topologically Close-Packed: Formation of Laves Phases in Moderately Polydisperse Hard-Sphere Mixtures

Particle size polydispersity can help to inhibit crystallization of the hard-sphere fluid into close-packed structures at high packing fractions and thus is often employed to create model glass-forming systems. Nonetheless, it is known that hard-sphere mixtures with modest polydispersity still have ordered ground states. Here, we demonstrate by computer simulation that hard-sphere mixtures with increased polydispersity fractionate on the basis of particle size, and a bimodal subpopulation favors formation of topologically close-packed C14 and C15 Laves phases in coexistence with a disordered phase. The generality of this result is supported by simulations of hard-sphere mixtures with particle-size distributions of four different forms.

cond-mat.soft↗

arXiv2018

Gelation of Plasmonic Metal Oxide Nanocrystals by Polymer-Induced Depletion-Attractions

Gelation of colloidal nanocrystals (NCs) emerged as a strategy to preserve inherent nanoscale properties in multiscale architectures. Yet available gelation methods still struggle to reliably control nanoscale optical phenomena such as photoluminescence and localized surface plasmon resonance (LSPR) across NC systems due to processing variability. Here, we report on an alternative gelation method based on physical inter-NC interactions: short-range depletion-attractions balanced by long-range electrostatic repulsions. The latter are established by removing the native organic ligands that passivate tin-doped indium oxide (ITO) NCs while the former are introduced by mixing with small polyethylene glycol (PEG) chains. As we incorporate increasing concentrations of PEG, we observe a reentrant phase behavior featuring two favorable gelation windows; the first arises from bridging effects while the second is attributed to depletion-attractions according to phase behavior predicted by our unified theoretical model. The NCs remain discrete within the gel network, based on X-ray scattering and high-resolution transmission electron microscopy. The infrared optical response of the gel is reflective of both the NC building blocks and the network architecture, being characteristic of ITO NC LSPR with coupling interactions between neighboring NCs.

cond-mat.mes-hall↗

arXiv2018

Inverse Design of Multicomponent Assemblies

Inverse design can be a useful strategy for discovering interactions that drive particles to spontaneously self-assemble into a desired structure. Here, we extend an inverse design methodology--relative entropy optimization--to determine isotropic interactions that promote assembly of targeted multicomponent phases, and we apply this extension to design interactions for a variety of binary crystals ranging from compact triangular and square architectures to highly open structures with dodecagonal and octadecagonal motifs. We compare the resulting optimized (self and cross) interactions for the binary assemblies to those obtained from optimization of analogous single-component systems. This comparison reveals that self interactions act as a `primer' to position particles at approximately correct coordination shell distances, while cross interactions act as the `binder' that refines and locks the system into the desired configuration. For simpler binary targets, it is possible to successfully design self-assembling systems while restricting one of these interaction types to be a hard-core-like. However, optimization of both self and cross interaction types appears necessary to design for assembly of more complex or open structures.

cond-mat.soft↗

arXiv2017

Design of two-dimensional particle assemblies using isotropic pair interactions with an attractive well

Using ground-state and relative-entropy based inverse design strategies, isotropic interactions with an attractive well are determined to stabilize and promote as- sembly of particles into two-dimensional square, honeycomb, and kagome lattices. The design rules inferred from these results are discussed and validated in the dis- covery of interactions that favor assembly of the highly open truncated-square and truncated-hexagonal lattices.

cond-mat.soft↗

arXiv2017

Designing convex repulsive pair potentials that favor assembly of kagome and snub square lattices

Building on a recently introduced inverse strategy, isotropic and convex repulsive pair potentials were designed that favor assembly of particles into kagome and equilateral snub square lattices. The former interactions were obtained by numerical solution of a variational problem that maximizes the range of density for which the ground state of the potential is the kagome lattice. Similar optimizations targeting the snub square lattice were also carried out, employing a constraint that required a minimum chemical potential advantage of the target over select competing structures. This constraint helped discover isotropic interactions that meaningfully favored the snub square lattice as the ground state structure despite the asymmetric spatial distribution of particles in its coordination shells and the presence of tightly competing structures. Consistent with earlier published results [Piñeros et al. J. Chem. Phys. 144, 084502 (2016)], enforcement of greater chemical potential advantages for the target lattice in the interaction optimization led to assemblies with enhanced thermal stability.

cond-mat.soft↗

arXiv2017

Recent advances in accelerated discovery through machine learning and statistical inference

Recent applications of machine learning and statistical inference provide case studies demonstrating how such approaches can accelerate the discovery process in physical chemistry and related fields. Examples discussed in this review include the introduction of automated approaches to systematically improve experimental design, increase the efficiency of computationally expensive molecular simulations, facilitate construction of predictive models for complex biological processes, and discover interparticle potentials that lead to materials which meet specified design goals. A common theme is the synergy between experiment and computation enabled by such approaches.

physics.chem-ph↗

arXiv2017

Designing Pairwise Interactions that Stabilize Open Crystals: Truncated Square and Truncated Hexagonal Lattices

Using a recently introduced formulation of the ground-state inverse design problem for a targeted lattice [Piñeros et al., J. Chem. Phys. 144} 084502 (2016)], we discover purely repulsive and isotropic pair interactions that stabilize low-density truncated square and truncated hexagonal crystals, as well as promote their assembly in Monte Carlo simulations upon isochoric cooling from a high-temperature fluid phase. The results illustrate that the primary challenge to stabilizing very open two-dimensional lattices is to design interactions that can favor the target structure over competing stripe microphases.

cond-mat.soft↗

arXiv2017

Interactions and design rules for assembly of porous colloidal mesophases

Porous mesophases, where well-defined particle-depleted 'void' spaces are present within a particle-rich background fluid, can be self-assembled from colloidal particles interacting via isotropic pair interactions with competing attractions and repulsions. While such structures could be of wide interest for technological applications (e.g., filtration, catalysis, absorption, etc.), relatively few studies have investigated the interactions that lead to these morphologies and how they compare to those that produce other micro-phase-separated structures, such as clusters. In this work, we use inverse methods of statistical mechanics to design model isotropic pair potentials that form porous mesophases. We characterize the resulting porous structures, correlating features of the pair potential with the targeted pore size and the particle packing fraction. The former is primarily encoded by the amplitude and range of the repulsive barrier of the designed pair potential and the latter by the attractive well depth. We observe a trade-off with respect to the packing fraction of the targeted morphology: greater values support more spherical and monodisperse pores that themselves organize into periodic structures, while lower values yield more mobile pores that do not assemble into ordered structures but remain stable over a larger range of packing fraction. We conclude by commenting on the limitations of targeting a specific pore diameter within the present inverse design approach as well as by describing future directions to overcome these limitations.

cond-mat.soft↗

arXiv2016

Inverse Design for Self Assembly via On-the-Fly Optimization

Inverse methods of statistical mechanics have facilitated the discovery of pair potentials that stabilize a wide variety of targeted lattices at zero temperature. However, such methods are complicated by the need to compare, within the optimization framework, the energy of the desired lattice to all possibly relevant competing structures, which are not generally known in advance. Furthermore, ground-state stability does not guarantee that the target will readily assemble from the fluid upon cooling from higher temperature. Here, we introduce a molecular dynamics simulation-based, optimization design strategy that iteratively and systematically refines the pair interaction according to the fluid and crystalline structural ensembles encountered during the assembly process. We successfully apply this probabilistic, machine-learning approach to the design of repulsive, isotropic pair potentials that assemble into honeycomb, kagome, square, rectangular, truncated square and truncated hexagonal lattices.

cond-mat.stat-mech↗

arXiv2016

Fluids with competing interactions: I. Decoding the structure factor to detect and characterize self-limited clustering

We use liquid state theory and computer simulations to gain insights into the shape of the structure factor for fluids of particles interacting via a combination of short-range attractions and long-range repulsions. Such systems can reversibly morph between homogeneous phases and states comprising compact self-limiting clusters. We first highlight trends with respect to the presence and location of the intermediate-range order (IRO) pre-peak in the structure factor, which is commonly associated with clustering, for wide ranges of the tunable parameters that control interparticle interactions (e.g., Debye screening length). Next, for approximately 100 different cluster phases at various conditions (where aggregates range in size from six to sixty monomers), we quantitatively relate the shape of the structure factor to physical characteristics including intercluster distance and cluster size. We also test two previously postulated criteria for identifying the emergence of clustered phases that are based on IRO peak-height and -width, respectively. We find that the criterion based on peak-width, which encodes the IRO thermal correlation length, is more robust across a wide range of conditions and interaction strengths but nonetheless approximate. Ultimately, we recommend a hybrid heuristic drawing on both pre-peak height and width for positively identifying the emergence of clustered states.

cond-mat.soft↗

arXiv2016

On the Formation of Equilibrium Gels via a Macroscopic Bond Limitation

Restricting the number of attractive physical "bonds" that can form between particles in a fluid suppresses the usual demixing phase transition to very low particle concentrations, allowing for the formation of open, percolated, and homogeneous states, aptly called equilibrium or "empty" gels. Most demonstrations of this concept have directly limited the microscopic particle valence via anisotropic (patchy) attractions; however, an alternative macroscopic valence limitation would be desirable for greater experimental tunability and responsiveness. One possibility, explored in this paper, is to employ primary particles with attractions mediated via a secondary species of linking particles. In such a system, the linker-to-primary particle ratio serves as a macroscopic control parameter for the average microscopic valence. We show that the phase behavior of such a system predicted by Wertheim's first order perturbation theory is consistent with equilibrium gel formation: the primary particle concentrations corresponding to the two-phase demixing transition are significantly suppressed at both low and high linker-to-primary particle ratios. Extensive molecular dynamics simulations validate these theoretical predictions but also reveal the presence of loops of bonded particles, which are neglected in the theory. Such loops cause densification and inhibit percolation, and hence the range of viable empty gel state conditions is somewhat reduced relative to the Wertheim theory predictions.

cond-mat.soft↗