arXiv subjects

Thomas Nikola

Publications and source records attributed to Thomas Nikola.

At least 19 recordsLinked to original sources

arXiv2026

CCAT: The Prime-Cam Instrument for the Fred Young Submillimeter Telescope -- Overview and Status

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST), under construction at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam will deliver over ten times greater mapping speed at submillimeter wavelengths than current facilities for unprecedented broadband and spectroscopic measurements in windows between 1.4 -- 0.3 mm (220 -- 850 GHz). When fully populated, Prime-Cam will field over 100,000 kinetic inductance detectors across seven independently optimized instrument modules. With Prime-Cam, the CCAT Collaboration will address a suite of science goals, from Big Bang cosmology, to galaxy evolution and star formation over cosmic time. Prime-Cam is scheduled for integration in FYST in late 2026, followed by a year of early science observations with the 280 and 350 GHz instrument modules. We discuss the design and in-lab testing of the 1.8-m diameter Prime-Cam receiver and 280 GHz instrument module, and give an update on deployment status and early science plans.

astro-ph.IM↗

arXiv2025

Fine-structure Line Atlas for Multi-wavelength Extragalactic Study (FLAMES) III: [C II] as Tracer, Crisis of SFR, [O III]/[C II] at High-z, New Answers and New Questions

In the final paper of this series, we discuss new perspectives and challenges in the study of interstellar medium (ISM), leveraging comprehensive catalogs and physical insights presented in our previous papers. We focus on key questions of far-infrared (FIR) fine-structure lines (FSLs): their origins, diagnostic value, and implications of correlations. Our analysis reveals a strong dependence on elemental abundance, so that FSL/H$\alpha$ traces metallicity, [N II]/[C II] traces N/O, and $\sim$80% of [C II] emission arises from neutral gas without systematic variations. We conclude a coherence exists between the emissions from ionized and neutral gases regarding energy sources and distribution. We argue that [C II] is physically a metallicity-dependent star formation rate (SFR) tracer, while its correlations with atomic or molecular gas masses are secondary. Crucially, the [C II] ``deficit'' is only part of a universal ``deficit'' problem that shows in all neutral and ionized gas lines including extinction-corrected H$\alpha$, caused by infrared (IR) luminosities and characterized by a dichotomy in gas and dust behaviors. This universal ``deficit'' marks a breakdown of the obscuration-corrected star-formation rate (SFR) calibration and imperils SFR estimates. We argue that it is caused by either IR ``excess'' or ionized gas ``deficit'', and present possible scenarios. A renewed picture of ISM structure is needed to reconcile with ionized--neutral gas coherence, metallicity dependence, and gas--dust dichotomy. We also discuss differences of FIR FSL at high redshifts: the offset in ``deficit'' trends, the similar [O III]/[C II] in metal-poor galaxies, and elevated [O III]/[C II] in dusty galaxies.

astro-ph.GA↗

arXiv2025

Fine-structure Line Atlas for Multi-wavelength Extragalactic Study (FLAMES) II: Photoionization Model View of Ionized to Neutral Gas Emission

Far-infrared (FIR) and mid-infrared (MIR) fine-structure lines (FSLs) provide key diagnostics of physical conditions in the interstellar medium (ISM). Building on empirical relations established in our previous work, we use photoionization models to systematically investigate the emission from both ionized and neutral gas phases in a coherent structure. By applying power-law fits to model parameters, we quantitatively capture how key FIR FSL ratios scale with physical properties such as density, radiation field strength and hardness, and elemental abundances. Our analysis confirms the primary dependencies behind most observed empirical trends and establishes certain FIR FSL ratios as tracers of physical parameters, while revealing that parameter marginalization-particularly in density and the O/H-$U$-$Q_1/Q_0$ relation-plays a crucial role in shaping tight correlations seen in galaxies. We also identify persistent challenges, including degeneracies between ionization parameter and radiation field hardness, uncertainties in neutral gas density, and difficulties in modeling dusty H II regions. We outline the fundamental observational and theoretical limitations of current FIR FSL diagnostics, and highlight prospects for advancing the field through comprehensive, multi-wavelength studies of diverse galaxy populations.

astro-ph.GA↗

arXiv2025

Fine-structure Line Atlas for Multi-wavelength Extragalactic Study (FLAMES) I: Comprehensive Low and High Redshift Catalogs and Empirical Relations for Probing Gas Conditions

Far-infrared (FIR) and mid-infrared (MIR) fine-structure lines (FSLs) are widely used for studying galaxies nearby and faraway. However, interpreting these lines is complicated by factors including sample and data bias, mismatch between resolved calibrations and unresolved observations, limitations in generalizing from case studies, and unresolved issues like the origin of [C II] emission and the so-called ``deficit.''In this series of papers, we assemble and analyze the most comprehensive atlas of FSL data to date. We explore their empirical correlations (paper I), compare them with photoionization models that cover multiphase gas (paper II), and discuss their physical origins and the new perspectives they offer for studying physical properties (paper III). The first paper introduces value-added catalogs of global FSL data of low- and high-z galaxies compiled from the literature, covering most of the existing observations, supplemented with ancillary ultraviolet to FIR information. Our analysis focus on commonly used diagnostics, such as electron density, radiation field strength, metallicity, and electron temperature. We present their distributions across different galaxy samples and redshifts, and cross-validate the reliability of these diagnostics in measuring physical conditions. By examining empirical relations, we identify the contribution of active galactic nuclei (AGN) to the FIR FSLs [O III]88 and [O I]63, and reveal a bias in density measurements. FIR FSLs show good concordance with their optical counterparts. Our findings indicate that variations in FSL ratios are primarily driven by the relative abundances of emitting ions, underscoring their value as tracers of metallicity and radiation field strength. Finally, we compare the FIR FSL properties of low- and high-z galaxies, discussing both their similarities and differences.

astro-ph.GA↗

arXiv2025

Resolved ALMA [CII] 158 micron Observations at Cosmic Noon: ISM Structure and Dynamics of Starbursting QSO SDSSJ1000

We present spatially resolved Alma Band-9 observations of the [CII] 158 $\mu$m fine structure line from an optically selected quasar, SDSS J100038.01+020822.4 (J1000), at z=1.8275. By utilizing [OI] 63 $\mu$m line observations from Herschel/PACS and constructing a detailed dust SED using Herschel and Spitzer archival imaging data, we show that the [CII] line emission is well explained by a photodissociation region (PDR) model, in which the emission arises from the surfaces of molecular clouds exposed to far-UV radiation fields $\sim 5\cdot10^3$ times the local interstellar radiation field (G$_0$). We find a factor of 30 variation in spatially resolved [CII]/Far-IR continuum across the source which is explained by the reduced fraction of cooling via [CII] line emission at such high far-UV field strengths. By matching derived PDR parameters to the observed far-IR line and continuum intensities we derive cloud size-scales and find that typical cloud radii in J1000 are $\sim$3.5 pc perhaps indicating an ISM that is highly fractured due to intense star formation activity. We model the galaxy dynamically and find that the [CII] emission is contained within a compact, dynamically cold disk with v/$\sigma$=6.2, consistent with cosmological simulations. We also report the discovery of a companion galaxy to j1000 confirmed by the detection of [CII] and use recently obtained JWST/NirCAM imaging of the system to argue for J1000 being an interacting system. With total stellar mass $\sim 1.5 \times 10^{10}$ M$_\odot$ and main-component dynamical mass $\gtrsim 10^{11}$ M$_\odot$, the J1000 system is a progenitor to the most massive galaxies seen in the local Universe.

astro-ph.GA↗

arXiv2024

CCAT: A status update on the EoR-Spec instrument module for Prime-Cam

The Epoch of Reionization Spectrometer (EoR-Spec) is an upcoming Line Intensity Mapping (LIM) instrument designed to study the evolution of the early universe (z = 3.5 to 8) by probing the redshifted [CII] 158 $\mu$m fine-structure line from aggregates of galaxies. The [CII] emission is an excellent tracer of star formation since it is the dominant cooling line from neutral gas heated by OB star light and thus can be used to probe the reionization of the early Universe due to star formation. EoR-Spec will be deployed on Prime-Cam, a modular direct-detection receiver for the 6-meter Fred Young Submillimeter Telescope (FYST), currently under construction by CPI Vertex Antennentechnik GmbH and to be installed near the summit of Cerro Chajnantor in the Atacama Desert. This instrument features an image plane populated with more than 6500 Microwave Kinetic Inductance Detectors (MKIDs) that are illuminated by a 4-lens optical design with a cryogenic, scanning Fabry-Perot Interferometer (FPI) at the pupil of the optical system. The FPI is designed to provide a spectral resolving power of $R\sim100$ over the full spectral range of 210--420 GHz. EoR-Spec will tomographically survey the E-COSMOS and E-CDFS fields with a depth of about 4000 hours over a 5 year period. Here we give an update on EoR-Spec's final mechanical/optical design and the current status of fabrication, characterization and testing towards first light in 2026.

astro-ph.IM↗

arXiv2024

CCAT: Nonlinear effects in 280 GHz aluminum kinetic inductance detectors

Prime-Cam, a first-generation science instrument for the Atacama-based Fred Young Submillimeter Telescope, is being built by the CCAT Collaboration to observe at millimeter and submillimeter wavelengths using kinetic inductance detectors (KIDs). Prime-Cam's 280 GHz instrument module will deploy with two aluminum-based KID arrays and one titanium nitride-based KID array, totaling approximately 10,000 detectors at the focal plane, all of which have been fabricated and are currently undergoing testing. One complication of fielding large arrays of KIDs under dynamic loading conditions is tuning the detector tone powers to maximize signal-to-noise while avoiding bifurcation due to the nonlinear kinetic inductance. For aluminum-based KIDs, this is further complicated by additional nonlinear effects which couple tone power to resonator quality factors and resonant frequencies. While both nonequilibrium quasiparticle dynamics and two-level system fluctuations have been shown to give rise to qualitatively similar distortions, modeling these effects alongside nonlinear kinetic inductance is inefficient when fitting thousands of resonators on-sky with existing models. For this reason, it is necessary to have a detailed understanding of the nonlinear effects across relevant detector loading conditions, including how they impact on on-sky noise and how to diagnose the detector's relative performance. We present a study of the competing nonlinearities seen in Prime-Cam's 280 GHz aluminum KIDs, with a particular emphasis on the resulting distortions to the resonator line shape and how these impact detector parameter estimation.

astro-ph.IM↗

arXiv2024

CCAT: Prime-Cam Optics Overview and Status Update

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST). FYST's crossed-Dragone design provides high optical throughput to take advantage of its unique site at 5600 m on Cerro Chajnantor in Chile's Atacama Desert to reach mapping speeds over ten times greater than current and near-term submillimeter experiments. Housing up to seven independent instrument modules in its 1.8-meter diameter cryostat, Prime-Cam will combine broadband polarization-sensitive modules and spectrometer modules designed for observations in several frequency windows between 210 GHz and 850 GHz to study a wide range of astrophysical questions from Big Bang cosmology to the formation of stars and galaxies in the Epoch of Reionization and beyond. In order to cover this range of frequencies and observation modes, each of the modules contains a set of cold reimaging optics that is optimized for the science goals of that module. These optical setups include several filters, three or four anti-reflection-coated silicon lenses, and a Lyot stop to control the field of view and illumination of the primary mirror, satisfy a series of mechanical constraints, and maximize optical performance within each passband. We summarize the design considerations and trade-offs for the optics in these modules and provide a status update on the fabrication of the Prime-Cam receiver and the design of its 1 K and 100 mK thermal BUSs.

astro-ph.IM↗

arXiv2024

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions.

astro-ph.IM↗

arXiv2024

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.

astro-ph.IM↗

arXiv2024

A benchmark for extreme conditions of the multiphase interstellar medium in the most luminous hot dust-obscured galaxy at z = 4.6

WISE J224607.6-052634.9 (W2246-0526) is a hot dust-obscured galaxy at $z$ = 4.601, and the most luminous obscured quasar known to date. W2246-0526 harbors a heavily obscured supermassive black hole that is most likely accreting above the Eddington limit. We present observations with the Atacama Large Millimeter/submillimeter Array (ALMA) in seven bands, including band 10, of the brightest far-infrared (FIR) fine-structure emission lines of this galaxy: [OI]$_{63μm}$, [OIII]$_{88μm}$, [NII]$_{122μm}$, [OI]$_{145μm}$, [CII]$_{158μm}$, [NII]$_{205μm}$, [CI]$_{370μm}$, and [CI]$_{609μm}$. A comparison of the data to a large grid of Cloudy radiative transfer models reveals that a high hydrogen density ($n_{H}\sim3\times10^3$ cm$^{-3}$) and extinction ($A_{V}\sim300$ mag), together with extreme ionization ($log(U)=-0.5$) and a high X-ray to UV ratio ($α_{ox}\geq-0.8$) are required to reproduce the observed nuclear line ratios. The values of $α_{ox}$ and $U$ are among the largest found in the literature and imply the existence of an X-ray-dominated region (XDR). In fact, this component explains the a priori very surprising non-detection of the [OIII]$_{88μm}$ emission line, which is actually suppressed, instead of boosted, in XDR environments. Interestingly, the best-fitted model implies higher X-ray emission and lower CO content than what is detected observationally, suggesting the presence of a molecular gas component that should be further obscuring the X-ray emission over larger spatial scales than the central region that is being modeled. These results highlight the need for multiline infrared observations to characterize the multiphase gas in high redshift quasars and, in particular, W2246-0526 serves as an extreme benchmark for comparisons of interstellar medium conditions with other quasar populations at cosmic noon and beyond.

astro-ph.GA↗

arXiv2023

Discovery of a Dusty, Chemically Mature Companion to a z$\sim$4 Starburst Galaxy in JWST ERS Data

We report the discovery of two companion sources to a strongly lensed galaxy SPT0418-47 ("ring") at redshift 4.225, targeted by the JWST Early Release Science program. We confirm that these sources are at a similar redshift as the ring based on H$α$ detected in the NIRSpec spectrum, and [C II] 158 $μ$m line from ALMA. Using multiple spectral lines detected in JWST/NIRSpec, the rest-frame optical to infrared images from NIRCam and MIRI, and far-infrared (FIR) dust continuum detected by ALMA, we argue that the newly discovered sources are actually lensed images of the same companion galaxy, hereafter referred to as SPT0418-SE ("SE"), located within 5 kpc in the source plane of the ring. The star formation rate derived using [C II] and dust continuum puts a lower limit of 17 M$_\odot$/yr, while the SFR$_\mathrm{Hα}$ is estimated to be >2 times lower, thereby confirming that SE is a heavily dust obscured star-forming galaxy. Analysis using optical strong line diagnostics suggests that SE has near solar elemental abundance, while the ring appears to have super-solar metallicity O/H and N/O. We attempt to reconcile the high metallicity in this system by invoking early onset of star formation with continuous high star forming efficiency, or that optical strong line diagnostics need revision at high redshift. We suggest that SPT0418-47 resides in a massive dark matter halo with yet to be discovered neighbors. This work highlights the importance of joint analysis of JWST and ALMA data for a deep and complete picture of the early Universe.

astro-ph.GA↗

arXiv2022

CCAT-prime: The Optical Design for the Epoch of Reionization Spectrometer

The Epoch of Reionization Spectrometer (EoR-Spec) will be an instrument module for the Prime-Cam receiver on the CCAT-prime Collaboration's Fred Young Submillimeter Telescope (FYST), a 6-m primary mirror Crossed Dragone telescope. With its Fabry-Perot interferometer (FPI), EoR-Spec will step through frequencies between 210 and 420 GHz to perform line intensity mapping of the 158 $μ$m [CII] line in aggregates of star-forming galaxies between redshifts of 3.5 and 8 to trace the evolution of structure in the universe during the epoch of reionization. Here we present the optical design of the module including studies of the optical quality and other key parameters at the image surface. In order to achieve the required resolving power (R$\sim$100) with the FPI, it is important to have a highly collimated beam at the Lyot stop of the system; the optimization process to achieve this goal with four lenses instead of three as used in other Prime-Cam modules is outlined. As part of the optimization, we test the effect of replacing some of the aspheric lenses with biconic lenses in this Crossed Dragone design and find that the biconic lenses tend to improve the image quality across the focal plane of the module.

astro-ph.IM↗

arXiv2022

CCAT-prime: RFSoC Based Readout for Frequency Multiplexed Kinetic Inductance Detectors

The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every category of size, weight, power, cost, and bandwidth over the previous generation readout systems. We describe a baseline firmware design which can read out four independent RF networks each with 500 MHz of bandwidth and 1000 detectors for ~30 W. The overall readout architecture is a combination of hardware, gateware/firmware, software, and network design. The requirements of the readout are driven by the 850 GHz instrument module of the 7-module Prime-Cam instrument. These requirements along with other constraints which have led to critical design choices are highlighted. Preliminary measurements of the system phase noise and dynamic range are presented.

astro-ph.IM↗

arXiv2022

CCAT-prime: Characterization of the First 280 GHz MKID Array for Prime-Cam

The Prime-Cam receiver on the Fred Young Submillimeter Telescope for the CCAT-prime project aims to address important astrophysical and cosmological questions with sensitive broadband, polarimetric, and spectroscopic measurements. The primary frequency bands in development include 280, 350, and 850 GHz for the polarization-sensitive broadband channels and 210--420 GHz for the spectrometers. Microwave kinetic inductance detectors (MKIDs) are a natural choice of detector technology for the simplicity in multiplexed readout needed for large format arrays at these high frequencies. We present here the initial lab characterization of the feedhorn-coupled 280 GHz polarimetric MKID array, and outline the plans for the subsequent MKID arrays and the development of the testbed to characterize them.

astro-ph.IM↗

arXiv2022

CCAT-prime: Design of the Mod-Cam receiver and 280 GHz MKID instrument module

Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater mapping speed than current and near-term facilities for unprecedented 280-850 GHz broadband and spectroscopic measurements with microwave kinetic inductance detectors (MKIDs). CCAT-prime will address a suite of science goals, from Big Bang cosmology to star formation and galaxy evolution over cosmic time. Mod-Cam deployment on FYST with a 280 GHz instrument module containing MKID arrays is planned for early science observations in 2024. Mod-Cam will be used to test instrument modules for Prime-Cam, which can house up to seven instrument modules. We discuss the design and status of the 0.9 m diameter, 1.8 m long Mod-Cam receiver and 40 cm diameter 280 GHz instrument module, with cold stages at 40 K, 4 K, 1 K, and 100 mK. We also describe the instrument module's cryogenic readout designs to enable the readout of more than 10,000 MKIDs across 18 networks.

astro-ph.IM↗

arXiv2022

CCAT-prime: The Design and Characterization of the Silicon Mirrors for the Fabry-Perot Interferometer in the Epoch of Reionization Spectrometer

The Epoch of Reionization Spectrometer (EoR-Spec) is one of the instrument modules to be installed in the Prime-Cam receiver of the Fred Young Submillimeter Telescope (FYST). This six-meter aperture telescope will be built on Cerro Chajnantor in the Atacama Desert in Chile. EoR-Spec is designed to probe early star-forming regions by measuring the [CII] fine-structure lines between redshift z = 3.5 and z = 8 using the line intensity mapping technique. The module is equipped with a scanning Fabry-Perot interferometer (FPI) to achieve the spectral resolving power of about RP = 100. The FPI consists of two parallel and identical, highly reflective mirrors with a clear aperture of 14 cm, forming a resonating cavity called etalon. The mirrors are silicon-based and patterned with double-layer metamaterial anti-reflection coatings (ARC) on one side and metal mesh reflectors on the other. The double-layer ARCs ensure a low reflectance at one substrate surface and help tailor the reflectance profile over the FPI bandwidth. Here we present the design, fabrication processes, test setup, and characterization of silicon mirrors for the FPI.

astro-ph.IM↗

arXiv2021

CCAT-prime: Designs and status of the first light 280 GHz MKID array and Mod-Cam receiver

The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way for Prime-Cam, the primary first generation instrument, which will house up to seven instrument modules to simultaneously observe the sky and study a diverse set of science goals from monitoring protostars to probing distant galaxy clusters and characterizing the cosmic microwave background (CMB). At least one feedhorn-coupled array of microwave kinetic inductance detectors (MKIDs) centered on 280 GHz will be included in Mod-Cam at first light, with additional instrument modules to be deployed along with Prime-Cam in stages. The first 280 GHz detector array was fabricated by the Quantum Sensors Group at NIST in Boulder, CO and includes 3,456 polarization-sensitive MKIDs. Current mechanical designs allow for up to three hexagonal arrays to be placed in each single instrument module. We present details on this first light detector array, including mechanical designs and cold readout plans, as well as introducing Mod-Cam as both a testbed and predecessor to Prime-Cam.

astro-ph.IM↗