Searcharxiv⌕ Search

arXiv subjects

Thomas Olsen

Publications and source records attributed to Thomas Olsen.

At least 73 records · Page 4Linked to original sources
arXiv2017

Assessing the performance of the Random Phase Approximation for exchange and superexchange coupling constants in magnetic crystalline solids

The Random Phase Approximation (RPA) for total energies has previously been shown to provide a qualitatively correct description of static correlation in molecular systems, where density functional theory (DFT) with local functionals are bound to fail. This immediately poses the question of whether the RPA is also able to capture the correct physics of strongly correlated solids such as Mott insulators. Due to strong electron localization, magnetic interactions in such systems are dominated by superexchange, which in the simplest picture can be regarded as the analogue of static correlation for molecules. In the present work we investigate the performance of the RPA for evaluating both superexchange and direct exchange interactions in the magnetic solids NiO, MnO, Na3Cu2SbO6, Sr2CuO3, Sr2CuTeO6, and a monolayer of CrI3, which are chosen to represent a broad variety of magnetic interactions. It is found that the RPA can accurately correct the large errors introduced by Hartree-Fock - independent of the input orbitals used for the perturbative expansion. However, in most cases, accuracies similar to RPA can be obtained with DFT+U, which is significantly simpler from a computational point of view.

cond-mat.mtrl-sci↗
arXiv2016

Interlayer excitons and Band Alignment in MoS$_2$/hBN/WSe$_2$ van der Waals Heterostructures

Van der Waals heterostructures (vdWH) provide an ideal playground for exploring light-matter interactions at the atomic scale. In particular, structures with a type-II band alignment can yield detailed insight into free carrier-to-photon conversion processes, which are central to e.g. solar cells and light emitting diodes. An important first step in describing such processes is to obtain the energies of the interlayer exciton states existing at the interface. Here we present a general first-principles method to compute the electronic quasi-particle (QP) band structure and excitonic binding energies of incommensurate vdWHs. The method combines our quantum electrostatic heterostructure (QEH) model for obtaining the dielectric function with the many-body GW approximation and a generalized 2D Mott-Wannier exciton model. We calculate the level alignment together with intra and interlayer exciton binding energies of bilayer MoS$_2$/WSe$_2$ with and without intercalated hBN layers, finding excellent agreement with experimental photoluminescence spectra. Comparison to density functional theory calculations demonstrate the crucial role of self-energy and electron-hole interaction effects.

cond-mat.mtrl-sci↗
arXiv2016

Surface theorem for the Chern-Simons axion coupling

The Chern-Simons axion coupling of a bulk insulator is only defined modulo a quantum of e^2/h. The quantized part of the coupling is uniquely defined for a bounded insulating sample, but it depends on the specific surface termination. Working in a slab geometry and representing the valence bands in terms of hybrid Wannier functions, we show how to determine that quantized part from the excess Chern number of the hybrid Wannier sheets located near the surface of the slab. The procedure is illustrated for a tight-binding model consisting of coupled quantum anomalous Hall layers. By slowly modulating the model parameters, it is possible to transfer one unit of Chern number from the bottom to the top surface over the course of a cyclic evolution of the bulk Hamiltonian. When the evolution of the surface Hamiltonian is also cyclic, the Chern pumping is obstructed by chiral touchings between valence and conduction surface bands.

cond-mat.mtrl-sci↗
arXiv2016

Designing in-plane heterostructures of quantum spin hall insulators from first principles: 1T'-MoS2 with adsorbates

Interfaces between normal and topological insulators are bound to host metallic states that are protected by time-reversal symmetry and are therefore robust against disorder and interface reconstruction. Two-dimensional topological insulators (quantum spin Hall insulators) offer a unique opportunity to change the local topology by adsorption of atoms or molecules and thus comprise an ideal platform for designing topological heterostructures. Here, we apply first principles calculations to show that the quantum spin Hall insulator 1T'-MoS2 exhibits a phase transition to a trivial insulator upon adsorption of various atoms. It is then demonstrated that one-dimensional metallic boundary states indeed arise in a ribbon geometry of alternating regions with and without adsorbed oxygen and that these boundary states generically constitute simple linear connections between valence and conduction bands. This is in sharp contrast to topological edge states that typically exhibit strong dispersion that are sensitively to a particular edge termination. The heterostructure is also suggestive of a simple design of one-dimensional metallic networks in sheets of 1T'-MoS2.

cond-mat.mtrl-sci↗
arXiv2016

Defect Tolerant Monolayer Transition Metal Dichalcogenides

Localized electronic states formed inside the band gap of a semiconductor due to crystal defects can be detrimental to the material's optoelectronic properties. Semiconductors with lower tendency to form defect induced deep gap states are termed defect tolerant. Here we provide a systematic first principles investigation of defect tolerance in 29 monolayer transition metal dichalcogenides (TMDs) of interest for nanoscale optoelectronics. We find that the TMDs based on group VI and X metals form deep gap states upon creation of a chalcogen (S, Se, Te) vacancy while the TMDs based on group IV metals form only shallow defect levels and are thus predicted to be defect tolerant. Interestingly, all the defect sensitive TMDs have valence and conduction bands with very similar orbital composition. This indicates a bonding/anti-bonding nature of the gap which in turn suggests that dangling bonds will fall inside the gap. These ideas are made quantitative by introducing a descriptor that measures the degree of similarity of the conduction and valence band manifolds. Finally, the study is generalized to non-polar nanoribbons of the TMDs where we find that only the defect sensitive materials form edge states within the band gap.

cond-mat.mtrl-sci↗
arXiv2016

Metal-insulator transition in disordered systems from the one-body density matrix

The insulating state of matter can be probed by means of a ground state geometrical marker, which is closely related to the modern theory of polarization (based on a Berry phase). In the present work we show that this marker can be applied to determine the metal-insulator transition in disordered systems. In particular, for non-interacting systems the geometrical marker can be obtained from the configurational average of the norm-squared one-body density matrix, which can be calculated within open as well as periodic boundary conditions. This is in sharp contrast to a classification based on the static conductivity, which is only sensible within periodic boundary conditions. We exemplify the method by considering a simple lattice model, known to have a metal-insulator transition as a function of the disorder strength and demonstrate that the transition point can be obtained accurately from the one-body density matrix. The approach has a general {\it ab-initio} formulation and can be applied to realistic disordered materials by standard electronic structure methods.

cond-mat.dis-nn↗
arXiv2015

Simple Screened Hydrogen Model of Excitons in Two-Dimensional Materials

We present a generalized hydrogen model for the binding energies ($E_B$) of excitons in two-dimensional (2D) materials that sheds light on the fundamental differences between excitons in two and three dimensions. In contrast to the well-known hydrogen model of three-dimensional (3D) excitons, the description of 2D excitons is complicated by the fact that the screening cannot be assumed to be local. We show that one can consistently define an effective 2D dielectric constant by averaging the screening over the extend of the exciton. For an ideal 2D semiconductor this leads to a simple expression for $E_B$ that only depends on the excitonic mass and the 2D polarizability $α$. The model is shown to produce accurate results for 51 transition metal dichalcogenides. Remarkably, over a wide range of polarizabilities the expression becomes independent of the mass and we obtain $E_B^{2D}\approx3/(4πα)$, which explains the recently observed linear scaling of exciton binding energies with band gap. It is also shown that the model accurately reproduces the non-hydrogenic Rydberg series in WS$_2$ and can account for screening from the environment.

cond-mat.mes-hall↗
arXiv2015

Excitons in van der Waals heterostructures: The important role of dielectric screening

The existence of strongly bound excitons is one of the hallmarks of the newly discovered atomically thin semi-conductors. While it is understood that the large binding energy is mainly due to the weak dielectric screening in two dimensions (2D), a systematic investigation of the role of screening on 2D excitons is still lacking. Here we provide a critical assessment of a widely used 2D hydrogenic exciton model which assumes a dielectric function of the form ε(q) = 1 + 2παq, and we develop a quasi-2D model with a much broader applicability. Within the quasi-2D picture, electrons and holes are described as in-plane point charges with a finite extension in the perpendicular direction and their interaction is screened by a dielectric function with a non-linear q-dependence which is computed ab-initio. The screened interaction is used in a generalized Mott-Wannier model to calculate exciton binding energies in both isolated and supported 2D materials. For isolated 2D materials, the quasi-2D treatment yields results almost identical to those of the strict 2D model and both are in good agreement with ab-initio many-body calculations. On the other hand, for more complex structures such as supported layers or layers embedded in a van der Waals heterostructure, the size of the exciton in reciprocal space extends well beyond the linear regime of the dielectric function and a quasi-2D description has to replace the 2D one. Our methodology has the merit of providing a seamless connection between the strict 2D limit of isolated monolayer materials and the more bulk-like screening characteristics of supported 2D materials or van der Waals heterostructures.

cond-mat.mtrl-sci↗
arXiv2015

Valley Hall effect in disordered monolayer MoS2 from first principles

Electrons in certain two-dimensional crystals possess a pseudospin degree of freedom associated with the existence of two inequivalent valleys in the Brillouin zone. If, as in monolayer MoS2, inversion symmetry is broken and time-reversal symmetry is present, equal and opposite amounts of k-space Berry curvature accumulate in each of the two valleys. This is conveniently quantified by the integral of the Berry curvature over a single valley - the valley Hall conductivity. We generalize this definition to include contributions from disorder described with the supercell approach, by mapping ("unfolding") the Berry curvature from the folded Brillouin zone of the disordered supercell onto the normal Brillouin zone of the pristine crystal, and then averaging over several realizations of disorder. We use this scheme to study from first-principles the effect of sulfur vacancies on the valley Hall conductivity of monolayer MoS2. In dirty samples the intrinsic valley Hall conductivity receives gating-dependent corrections that are only weakly dependent on the impurity concentration, consistent with side-jump scattering and the unfolded Berry curvature can be interpreted as a k-space resolved side-jump. At low impurity concentrations skew scattering dominates, leading to a divergent valley Hall conductivity in the clean limit. The implications for the recently-observed photoinduced anomalous Hall effect are discussed.

cond-mat.dis-nn↗
arXiv2014

Static correlation beyond the random phase approximation: Dissociating H2 with the Bethe-Salpeter equation and time-dependent GW

We investigate various approximations to the correlation energy of a H$_2$ molecule in the dissociation limit, where the ground state is poorly described by a single Slater determinant. The correlation energies are derived from the density response function and it is shown that response functions derived from Hedin's equations (Random Phase Approximation (RPA), Time-dependent Hartree-Fock (TDHF), Bethe-Salpeter equation (BSE), and Time-Dependent GW (TDGW)) all reproduce the correct dissociation limit. We also show that the BSE improves the correlation energies obtained within RPA and TDHF significantly for intermediate binding distances. A Hubbard model for the dimer allow us to obtain exact analytical results for the various approximations, which is readily compared with the exact diagonalization of the model. Moreover, the model is shown to reproduce all the qualitative results from the \textit{ab initio} calculations and confirms that BSE greatly improves the RPA and TDHF results despite the fact that the BSE excitation spectrum breaks down in the dissociation limit. In contrast, Second Order Screened Exchange (SOSEX) gives a poor description of the dissociation limit, which can be attributed to the fact that it cannot be derived from an irreducible response function.

cond-mat.str-el↗
arXiv2014

Accurate Ground State Energies of Solids and Molecules from Time Dependent Density Functional Theory

We demonstrate that ground state energies approaching chemical accuracy can be obtained by combining the adiabatic connection fluctuation-dissipation theorem (ACFDT) with time-dependent density functional theory (TDDFT). The key ingredient is a renormalization scheme, which eliminates the divergence of the correlation hole characteristic of any local kernel. This new class of renormalized kernels gives a significantly better description of the short-range correlations in covalent bonds compared to the random phase approximation (RPA) and yields a four fold improvement of RPA binding energies in both molecules and solids. We also consider examples of barrier heights in chemical reactions, molecular adsorption and graphene interacting with metal surfaces, which are three examples where RPA has been successful. In these cases, the renormalized kernel provides results that are of equal quality or even slightly better than RPA, with a similar computational cost.

cond-mat.mtrl-sci↗
arXiv2014

How dielectric screening in two-dimensional crystals affects the convergence of excited-state calculations: Monolayer MoS$_2$

We present first-principles many-body calculations of the dielectric constant, quasiparticle band structure, and optical absorption spectrum of monolayer MoS$_2$ using a supercell approach. As the separation between the periodically repeated layers is increased, the dielectric function of the layer develops a strong $q$ dependence around $q=0$. This implies that denser $k$-point grids are required to converge the band gap and exciton binding energies when large supercells are used. In the limit of infinite layer separation, here obtained using a truncated Coulomb interaction, a $45\times45$ $k$-point grid is needed to converge the G$_0$W$_0$ band gap and exciton energy to within 0.1 eV. We provide an extensive comparison with previous studies and explain agreement and variations in the results. It is demonstrated that too coarse $k$-point sampling and the interactions between the repeated layers have opposite effects on the band gap and exciton energy, leading to a fortuitous error cancellation in the previously published results.

cond-mat.mtrl-sci↗
arXiv2013

Beyond the random phase approximation: Improved description of short range correlation by a renormalized adiabatic local density approximation

We assess the performance of a recently proposed renormalized adiabatic local density approximation (rALDA) for \textit{ab initio} calculations of electronic correlation energies in solids and molecules. The method is an extension of the random phase approximation (RPA) derived from time-dependent density functional theory and the adiabatic connection fluctuation-dissipation theorem and contains no fitted parameters. The new kernel is shown to preserve the accurate description of dispersive interactions from RPA while significantly improving the description of short range correlation in molecules, insulators, and metals. For molecular atomization energies the rALDA is a factor of 7(4) better than RPA(PBE) when compared to experiments, and a factor of 3(1.5) better than RPA(PBE) for cohesive energies of solids. For transition metals the inclusion of full shell semi-core states is found to be crucial for both RPA and rALDA calculations and can improve the cohesive energies by up to 0.4 eV. Finally we discuss straightforward generalizations of the method, which might improve results even further.

cond-mat.mtrl-sci↗
arXiv2013

Quasiparticle GW calculations for solids, molecules and 2D materials

We present a plane wave implementation of the G0W0 approximation within the projector augmented wave method code GPAW. The computed band gaps of ten bulk semiconductors and insulators deviate on average by 0.2 eV (~ 5 %) from the experimental values - the only exception being ZnO where the calculated band gap is around 1 eV too low. Similar relative deviations are found for the ionization potentials of a test set of 32 small molecules. The importance of substrate screening for a correct description of quasiparticle energies and Fermi velocities in supported 2D materials is illustrated by the case of graphene/h-BN interfaces. Due to the long range Coulomb interaction between periodically repeated images, the use of a truncated interaction is found to be essential for obtaining converged results for 2D materials. For all systems studied, a plasmon pole approximation is found to reproduce the full frequency results to within 0.2 eV with a significant gain in computational speed. As alternative to G0W0, the efficient local GLLBSC potential yields significantly better results than the PBE0 hybrid. For completeness, we provide a mathematically rigorous and physically transparent introduction to the notion of quasiparticle states.

cond-mat.mtrl-sci↗
arXiv2013

The random phase approximation applied to solids, molecules, and graphene-metal interfaces: From weak to strong binding regimes

The random phase approximation (RPA) is attracting renewed interest as a universal and accurate method for first-principles total energy calculations. The RPA naturally accounts for long-range dispersive forces without compromising accuracy for short range interactions making the RPA superior to semi-local and hybrid functionals in systems dominated by weak van der Waals or mixed covalent-dispersive interactions. In this work we present plane wave-based RPA calculations for a broad collection of systems with bond types ranging from strong covalent to van der Waals. Our main result is the RPA potential energy surfaces of graphene on the Cu(111), Ni(111), Co(0001), Pd(111), Pt(111), Ag(111), Au(111), and Al(111) metal surfaces, which represent archetypical examples of metal-organic interfaces. Comparison with semi-local density approximations and a non-local van der Waals functional show that only the RPA captures both the weak covalent and dispersive forces which are equally important for these systems. We benchmark our implementation in the GPAW electronic structure code by calculating cohesive energies of graphite and a range of covalently bonded solids and molecules as well as the dissociation curves of H2 and H2+. These results show that RPA with orbitals from the local density approximation suffers from delocalization errors and systematically underestimates covalent bond energies yielding similar or lower accuracy than the Perdew-Burke-Ernzerhof (PBE) functional for molecules and solids, respectively.

cond-mat.mtrl-sci↗
arXiv2012

Extending the random-phase approximation for electronic correlation energies: The renormalized adiabatic local density approximation

The adiabatic connection fluctuation-dissipation theorem with the random phase approximation (RPA) has recently been applied with success to obtain correlation energies of a variety of chemical and solid state systems. The main merit of this approach is the improved description of dispersive forces while chemical bond strengths and absolute correlation energies are systematically underestimated. In this work we extend the RPA by including a parameter-free renormalized version of the adiabatic local density (ALDA) exchange-correlation kernel. The renormalization consists of a (local) truncation of the ALDA kernel for wave vectors $q>2k_F$, which is found to yield excellent results for the homogeneous electron gas. In addition, the kernel significantly improves both the absolute correlation energies and atomization energies of small molecules over RPA and ALDA. The renormalization can be straightforwardly applied to other adiabatic local kernels.

cond-mat.mtrl-sci↗
arXiv2010

Memory effects in non-adiabatic molecular dynamics at metal surfaces

We study the effect of temporal correlation in a Langevin equation describing non-adiabatic dynamics at metal surfaces. For a harmonic oscillator the Langevin equation preserves the quantum dynamics exactly and it is demonstrated that memory effects are needed in order to conserve the ground state energy of the oscillator. We then compare the result of Langevin dynamics in a harmonic potential with a perturbative master equation approach and show that the Langevin equation gives a better description in the non-perturbative range of high temperatures and large friction. Unlike the master equation, this approach is readily extended to anharmonic potentials. Using density functional theory we calculate representative Langevin trajectories for associative desorption of N$_2$ from Ru(0001) and find that memory effects lowers the dissipation of energy. Finally, we propose an ab-initio scheme to calculate the temporal correlation function and dynamical friction within density functional theory.

cond-mat.mtrl-sci↗