arXiv subjects

Thomas Pichler

Publications and source records attributed to Thomas Pichler.

At least 37 records · Page 2Linked to original sources

arXiv2019

Lattice Opening Upon Bulk Reductive Covalent Functionalization of Black Phosphorus

The chemical bulk reductive covalent functionalization of thin layer black phosphorus (BP) using BP intercalation compounds has been developed. Through effective reductive activation, covalent functionalization of the charged BP is achieved by organic alkyl halides. Functionalization was extensively demonstrated by means of several spectroscopic techniques and DFT calculations, showing higher functionalization degrees than the neutral routes.

physics.app-ph↗

arXiv2019

Templated direct growth of ultra-thin double-walled carbon nanotubes

Double-walled carbon nanotubes (DWCNTs) combined the advantages of multi-walled (MW-) and single-walled (SW-) CNTs can be obtained by transforming the precursors (e.g. fullerene, ferrocene) into thin inner CNTs inside SWCNTs as templates. However, this method is limited since the DWCNT yield is strongly influenced by the filling efficiency (depending on the type of the filled molecules), opening and cutting the SWCNTs, and the diameter of the host SWCNTs. Therefore, it cannot be applied to all types of SWCNT templates. Here we show a universal route to synthesize ultra-thin DWCNTs via making SWCNTs stable at high temperature in vacuum. This method applies to different types of SWCNTs including metallicity-sorted ones without using any precursors since the carbon sources were from the reconstructed SWCNTs and the residue carbons. The resulting DWCNTs are with high quality and the yield of inner tubes is comparable to/higher than that of the DWCNTs made from the transformation of ferrocene/fullerene peapods.

cond-mat.mtrl-sci↗

arXiv2019

The Growth of New Extended Carbon Nanophases from Ferrocene Inside Single-Walled Carbon Nanotubes

The Raman response of new structures grown after filling SWCNTs with ferrocene and transformation at moderate high temperatures is demonstrated to be very strong, even stronger than the response from the tubes. Transmission electron microscopy demonstrates that the new objects are flat and exhibit a structure similar to short fragments of nanoribbons. The growth process is controlled by two different activation energies for low and high transformation temperatures, respectively. Immediately after filling Raman pattern from a precursor molecule are detected. Two different types of nanoribbons were identified by selecting special laser energies for the Raman excitation. These ribbons have the signature of quaterrylene and terrylene, respectively.

cond-mat.mtrl-sci↗

arXiv2019

Extraction of Linear Carbon Chains Unravels the Role of the Carbon Nanotube Host

Linear carbon chains (LCCs) have been shown to grow inside double-walled carbon nanotubes (DWCNTs) but isolating them from this hosting material represents one of the most challenging tasks towards applications. Herein we report the extraction and separation of LCCs inside single-wall carbon nanotubes (LCCs@SWCNTs) extracted from a double walled host LCCs@DWCNTs by applying a combined tip-ultrasonic and density gradient ultracentrifugation (DGU) process. High-resolution transmission electron microscopy (HRTEM), optical absorption, and Raman spectroscopy show that not only short LCCs but clearly long LCCs (LLCCs) can be extracted and separated from the host. Moreover, the LLCCs can even be condensed by DGU. The Raman spectral frequency of LCCs remains almost unchanged regardless of the presence of the outer tube of the DWCNTs. This suggests that the major importance of the outer tubes is making the whole synthesis viable. We have also been able to observe the interaction between the LCCs and the inner tubes of DWCNTs, playing a major role in modifying the optical properties of LCCs. Our extraction method suggests the possibility towards the complete isolation of LCCs from CNTs.

cond-mat.mtrl-sci↗

arXiv2018

Position and momentum mapping of vibrations in graphene nanostructures in the electron microscope

Propagating atomic vibrational waves, phonons, rule important thermal, mechanical, optoelectronic and transport characteristics of materials. Thus the knowledge of phonon dispersion, namely the dependence of vibrational energy on momentum is a key ingredient to understand and optimize the material's behavior. However, despite its scientific importance in the last decade, the phonon dispersion of a freestanding monolayer of two dimensional (2D) materials such as graphene and its local variations has still remained elusive because of experimental limitations of vibrational spectroscopy. Even though electron energy loss spectroscopy (EELS) in transmission has recently been shown to probe the local vibrational charge responses, these studies are yet limited to polar materials like boron nitride or oxides, in which huge signals induced by strong dipole moments are present. On the other hand, measurements on graphene performed by inelastic x-ray (neutron) scattering spectroscopy or EELS in reflection do not have any spatial resolution and require large microcrystals. Here we provide a new pathway to determine the phonon dispersions down to the scale of an individual freestanding graphene monolayer by mapping the distinct vibration modes for a large momentum transfer. The measured scattering intensities are accurately reproduced and interpreted with density functional perturbation theory (DFPT). Additionally, a nanometre-scale mapping of selected momentum (q) resolved vibration modes using graphene nanoribbon structures has enabled us to spatially disentangle bulk, edge and surface vibrations.

cond-mat.mtrl-sci↗

arXiv2018

Carbon nanotube chirality determines properties of encapsulated linear carbon chain

Long linear carbon chains encapsulated inside carbon nanotubes are a very close realization of carbyne, the truly one-dimensional allotrope of carbon. Here we study individual pairs of double-walled carbon nanotubes and encapsulated linear carbon chains by tip-enhanced Raman scattering. We observe that the radial breathing mode of the inner nanotube correlates with the frequency of the carbon chain's Raman mode, revealing that the nanotube chirality determines the vibronic and electronic properties of the encapsulated carbon chain. We provide the missing link that connects the properties of the encapsulated long linear carbon chain with the structure of the host nanotube.

cond-mat.mes-hall↗

arXiv2017

Electronic band gaps of confined linear carbon chains ranging from polyyne to carbyne

Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different density functionals lead to very different values of the band gap of infinitely long carbyne. In this work, we applied resonant Raman excitation spectroscopy with more than 50 laser wavelengths to determine for the first time the band gap of long carbon chains encapsulated inside DWCNTs. The experimentally determined band gaps ranging from 2.253 to 1.848 eV follow a linear relation with Raman frequency. This lower bound is the smallest band gap of linear carbon chains observed so far. The comparison with experimental data obtained for short chains in gas phase or in solution demonstrates the effect of the DWCNT encapsulation, leading to an essential downshift of the band gap. This is explained by the interaction between the carbon chain and the host tube, which greatly modifies the chain's bond length alternation.

cond-mat.mtrl-sci↗

arXiv2017

Experimental determination of the local optical conductivity of a semiconducting carbon nanotube and its modification at individual defects

Measurements of optical properties at nanometre-level are of central importance for characterization of optoelectronic device. It was, however, hardly possible for the conventional light-probe measurements to determine the local optical properties from single quantum object with nanometrical inhomogeneity. Here we demonstrate the first successful determination of the absolute optical constants, including the optical conductivity and absorption coefficient, for an individual carbon nanotube with defects by comparing energy loss spectroscopy and optical absorption. The optical conductivity obtained from a certain type of defects indeed presents a characteristic modification near the lowest excitation peak (E11) where excitons and non-radiative transitions as well as phonon-coupled excitations are strongly involved. Detailed line-shape analysis of the E11 peak clearly shows different degree of exciton lifetime shortening and electronic state modification which is variable to the defect type.

cond-mat.mtrl-sci↗

arXiv2017

The First Precise Determination of Graphene Functionalisation by in situ Raman Spectroscopy

We report, for the first time, a comprehensive study involving in situ Raman spectroscopy supported by quantum mechanical calculations to exactly monitor the covalent binding to graphene with unprecedented precision. As a model reaction we have chosen the hydrogenation of reduced graphite ($KC_8$) with $H_2O$ and compared it with the corresponding exposure to $H_2$ and $O_2$. The early stages of graphene hydrogenation are accompanied by the evolution of a series of so far undiscovered D-bands ($D_1$-$D_5$). Using quantum mechanical calculations, we were able to unambiguously assign these bands to distinct lattice vibrations in the neighborhood of the covalently bound addend. Interestingly, the exposure of $KC_8$ to $H_2$ and $O_2$ didn't cause covalent binding, but intercalation of molecular $H_2$ or partial oxidation, respectively. A combination of $H_2O$ and $O_2$ treatment led to the formation of additional hydroxyl (-OH) functionalities. The latter reaction represents a very suitable model for the decomposition of graphenides under ambient conditions (hydrogenation and hydroxylation). We have applied this Raman analysis to simulate and satisfactorily characterize a series of additional covalently functionalised graphene derivatives prepared as bulk materials with different composition (e.g. degree of functionalisation and the nature of covalent addend) demonstrating the generality of the concept and the fundamental value for graphene chemistry.

cond-mat.mtrl-sci↗

arXiv2017

Nanoscale Magnetic Compasses

We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of few ferromagnetic domains. Aligned magnetically and encapsulated in an acrylate polymer matrix, these nanocompasses exhibit anisotropic bulk magnetic permeability with an easy axis normal to the needle direction, that can be understood as a result of the anisotropic demagnetizing field of a nonspherical single-domain particle. This novel material with orthogonal magnetic and structural axes could be highly useful as magnetic components in electromagnetic wave absorbent materials and magnetorheological fluids.

cond-mat.mes-hall↗

arXiv2016

Doping of metal-organic frameworks towards resistive sensing

Coordination polymerization leads to various metal-organic frameworks (MOFs) in which symmetrical metal nodes exposed to nano voids lead to unique physical properties and chemical functionalities. One of the challenges towards their applications as porous materials is to make MOFs optimally conductive to be used as electronic components. Here, we demonstrate that Co-MOF-74, a honeycomb nano{framework with one{dimensionally arranged cobalt atoms advances its physical properties by accommodating Tetracyanochinodimethan (TCNQ), an acceptor molecule. Strong intermolecular charge transfer narrows the optical band gap down to 1.5 eV of divalent TCNQ and enhances the electrical conduction, which allows the MOF to be utilized for resistive gas- and photo-sensing. Our result provides insight into electronic interactions in doped MOFs and paves the way towards their electronic applications.

cond-mat.mes-hall↗

arXiv2016

Controlled isotope arrangement in 13C enriched carbon nanotubes

We report the synthesis of a novel isotope engineered $^{13}{\rm C}$--$^{12}{\rm C}$ heteronuclear nanostructure: single-wall carbon nanotubes made of $^{13}{\rm C}$ enriched clusters which are embedded in natural carbon regions. The material is synthesized with a high temperature annealing from $^{13}{\rm C}$ enriched benzene and natural ${\rm C}_{60}$, which are co-encapsulated inside host SWCNTs in an alternating fashion. The Raman 2D line indicates that the $^{13}{\rm C}$ isotopes are not distributed uniformly in the inner tubes. A semi-empirical method based modeling of the Raman modes under $^{13}{\rm C}$ isotope enrichment shows that experimental data is compatible with the presence of $^{13}{\rm C}$ rich clusters which are embedded in a natural carbon containing matrix. This material may find applications in quantum information processing and storage using nuclear spins as qubits.

cond-mat.mtrl-sci↗

arXiv2016

Polyyne Electronic and Vibrational Properties under Environmental Interactions

Recently, the novel system of linear carbon chains inside of double-walled carbon nanotubes has extended the length of $sp^1$ hybridized carbon chains from 44 to thousands of atoms [L. Shi et al., Nat. Mater. 15, 634 (2016)]. The optoelectronic properties of these ultra-long chains are poorly described by current theoretical models, which are based on short chain experimental data and assume a constant environment. As such, a physical understanding of the system in terms of charge transfer and van der Waals interactions is widely missing. We provide a reference for the intrinsic Raman frequency of polyynes in vacuo and explicitly describe the interactions between polyynes and carbon nanotubes. We find that van der Waals interactions strongly shift the Raman frequency, which has been neither expected nor addressed before. As a consequence of charge transfer from the tube to the chain, the Raman response of long chains is qualitatively different from the known phonon dispersion of polymers close to the $Γ$-point. Based on these findings we show how to correctly interpret the Raman data, considering the nanotube's properties. This is essential for its use as an analytical tool to optimize the growth process for future applications.

cond-mat.mes-hall↗

arXiv2016

Disentangling Vacancy Oxidation on Metallicity-Sorted Carbon Nanotubes

Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O$_2$ and N$_2$, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low doping has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O$_2$ doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all the SWCNT's vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first principles density functional theory calculated Kohn-Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C$_2$$>$O), carbonyl (C$_2$$>$C$=$O), and ketene (C$=$C$=$O), as ordered by abundance. Upon oxidation of nearly all the SWCNT's vacancies, the central peak's intensity for the metallic SWCNT sample is 60\% greater than for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O$_2$ does not contribute to the measured XPS O~1s spectra.

cond-mat.mes-hall↗

arXiv2016

On the bonding environment of phosphorus in purified doped single-walled carbon nanotubes

In this work, phosphorous-doped single-walled carbon nanotubes have been synthesized by the thermal decomposition of trimethylphosphine using a high-vacuum chemical vapor deposition method. Furthermore, a modified density-gradient-ultracentrifugation process has been applied to carefully purify our doped material. The combined use of Raman and X-ray photoelectron spectroscopy allowed us to provide the first insight into the bonding environment of P incorporated into the carbon lattice, avoiding competing signals arising from synthesis byproducts. This study represents the first step toward the identification of the bonding configuration of P atoms when direct substitution takes place.

cond-mat.mtrl-sci↗

arXiv2015

Raman and XPS analyses of pristine and annealed N-doped double-walled carbon nanotubes

N-doped single/multi-walled carbon nanotubes (CNTs) were studied for long time from synthesis to properties. However, the stability of N in the CNT lattice still needs further developments. In this work, to obtain more stable N-doped CNTs, concentric double-walled (DW) CNTs with more N were synthesized using benzylamine as C and N source. In order to test the stability of N-doped DWCNTs, high-temperature annealing in vacuum was performed. By XPS and Raman spectroscopic measurements, we found that the N-doped DWCNTs are still stable under 1500 $\,^{\circ}\mathrm{C}$: the graphitic N does not change at all, the molecular N is partly removed, and the pyridinic N ratio greatly increases by more than two times. The reason could be that the N atoms from the surrounded N-contained materials combine into the CNT lattice during the annealing. Compared with the undoped DWCNTs, no Raman frequency shift was observed for the RBM, the G-band, and the G'-band of the N-doped DWCNTs.

physics.atm-clus↗

arXiv2015

Confined linear carbon chains: A route to bulk carbyne

The extreme instability and strong chemical activity of carbyne, the infinite sp1 hybridized carbon chain, are responsible for its low possibility to survive in ambient conditions. Therefore, much less has been possible to explore about carbyne as compared to other novel carbon allotropes such as fullerenes, nanotubes and graphene. Although end-capping groups can be used to stabilize carbon chains, length limitation is still a barrier for its actual production, and even more for applications. Here, we report a novel route for bulk production of record long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. A corresponding extremely high Raman band is the first proof of a truly bulk yield formation of very long arrangements, which is unambiguously confirmed by transmission electron microscopy and near-field Raman spectroscopy. Our production establishes a way to exceptionally long stable carbon chains including more than 2300 carbon atoms, and an elegant forerunner towards the final goal of a bulk production of essentially infinite carbyne.

cond-mat.mtrl-sci↗

arXiv2015

Transport, Magnetic and Vibrational Properties of Chemically Exfoliated Few Layer Graphene

We study the vibrational, magnetic and transport properties of Few Layer Graphene (FLG) using Raman and electron spin resonance spectroscopy and microwave conductivity measurements. FLG samples were produced using wet chemical exfoliation with different post-processing, namely ultrasound treatment, shear mixing, and magnetic stirring. Raman spectroscopy shows a low intensity D mode which attests a high sample quality. The G mode is present at $1580$ cm$^{-1}$ as expected for graphene. The 2D mode consists of 2 components with varying intensities among the different samples. This is assigned to the presence of single and few layer graphene in the samples. ESR spectroscopy shows a main line in all types of materials with a width of about $1$ mT and and a $g$-factor in the range of $2.005-2.010$. Paramagnetic defect centers with a uniaxial $g$-factor anisotropy are identified, which shows that these are related to the local sp$^2$ bonds of the material. All kinds of investigated FLGs have a temperature dependent resistance which is compatible with a small gap semiconductor. The difference in resistance is related to the different grain size of the samples.

cond-mat.mtrl-sci↗