arXiv subjects

Thomas R. Preston

Publications and source records attributed to Thomas R. Preston.

30 records · Page 2Linked to original sources

arXiv2024

(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering

Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.

physics.plasm-ph↗

arXiv2024

Excitation signatures of isochorically heated electrons in solids at finite wavenumber explored from first principles

Ultrafast heating of solids with modern X-ray free electron lasers (XFELs) leads to a unique set of conditions that is characterized by the simultaneous presence of heated electrons in a cold ionic lattice. In this work, we analyze the effect of electronic heating on the dynamic structure factor (DSF) in bulk Aluminium (Al) with a face-centered cubic lattice and in silicon (Si) with a crystal diamond structure using first-principles linear-response time-dependent density functional theory simulations. We find a thermally induced red shift of the collective plasmon excitation in both materials. In addition, we show that the heating of the electrons in Al can lead to the formation of a double-plasmon peak due to the extension of the Landau damping region to smaller wavenumbers. Finally, we demonstrate that thermal effects generate a measurable and distinct signature (peak-valley structure) in the DSF of Si at small frequencies. Our simulations indicate that there is a variety of new features in the spectrum of X-ray-driven solids, specifically at finite momentum transfer, which can probed in upcoming X-ray Thomson scattering (XRTS) experiments at various XFEL facilities.

physics.comp-ph↗

arXiv2024

The importance of temperature-dependent collision frequency in PIC simulation on nanometric density evolution of highly-collisional strongly-coupled dense plasmas

Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D3V) PIC simulation that features the realistic collision frequency around the Fermi temperature and atomic-scale cell size. The results are compared with state-of-the-art experimental results as well as with hydrodynamic simulation. We found that the PIC simulation is capable of simulating the nanoscale dynamics of solid-density plasmas around the Fermi temperature up to $\sim$2~ps driven by a laser pulse at the moderate intensity of $10^{14-15}$~$\mathrm{W/cm^{2}}$, by comparing with the state-of-the-art experimental results. The reliability of the simulation can be further improved in the future by implementing multi-dimensional kinetics and radiation transport.

physics.plasm-ph↗

arXiv2024

X-ray Thomson scattering absolute intensity from the f-sum rule in the imaginary-time domain

We present a formally exact and simulation-free approach for the normalization of X-ray Thomson scattering (XRTS) spectra based on the f-sum rule of the imaginary-time correlation function (ITCF). Our method works for any degree of collectivity, over a broad range of temperatures, and is applicable even in nonequilibrium situations. In addition to giving us model-free access to electronic correlations, this new approach opens up the intriguing possibility to extract a plethora of physical properties from the ITCF based on XRTS experiments.

physics.plasm-ph↗

arXiv2024

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.

physics.plasm-ph↗

arXiv2024

Resonant inelastic x-ray scattering in warm-dense Fe compounds beyond the SASE FEL resolution limit

Resonant inelastic x-ray scattering (RIXS) is a widely used spectroscopic technique, providing access to the electronic structure and dynamics of atoms, molecules, and solids. However, RIXS requires a narrow bandwidth x-ray probe to achieve high spectral resolution. The challenges in delivering an energetic monochromated beam from an x-ray free electron laser (XFEL) thus limit its use in few-shot experiments, including for the study of high energy density systems. Here we demonstrate that by correlating the measurements of the self-amplified spontaneous emission (SASE) spectrum of an XFEL with the RIXS signal, using a dynamic kernel deconvolution with a neural surrogate, we can achieve electronic structure resolutions substantially higher than those normally afforded by the bandwidth of the incoming x-ray beam. We further show how this technique allows us to discriminate between the valence structures of Fe and Fe$_2$O$_3$, and provides access to temperature measurements as well as M-shell binding energies estimates in warm-dense Fe compounds.

cond-mat.mtrl-sci↗

arXiv2023

Investigating Mechanisms of State Localization in Highly-Ionized Dense Plasmas

We present the first experimental observation of K$_β$ emission from highly charged Mg ions at solid density, driven by intense x-rays from a free electron laser. The presence of K$_β$ emission indicates the $n=3$ atomic shell is relocalized for high charge states, providing an upper constraint on the depression of the ionization potential. We explore the process of state relocalization in dense plasmas from first principles using finite-temperature density functional theory alongside a wavefunction localization metric, and find excellent agreement with experimental results.

physics.plasm-ph↗

arXiv2023

Evidence of free-bound transitions in warm dense matter and their impact on equation-of-state measurements

Warm dense matter (WDM) is now routinely created and probed in laboratories around the world, providing unprecedented insights into conditions achieved in stellar atmospheres, planetary interiors, and inertial confinement fusion experiments. However, the interpretation of these experiments is often filtered through models with systematic errors that are difficult to quantify. Due to the simultaneous presence of quantum degeneracy and thermal excitation, processes in which free electrons are de-excited into thermally unoccupied bound states transferring momentum and energy to a scattered x-ray photon become viable. Here we show that such free-bound transitions are a particular feature of WDM and vanish in the limits of cold and hot temperatures. The inclusion of these processes into the analysis of recent X-ray Thomson Scattering experiments on WDM at the National Ignition Facility and the Linac Coherent Light Source significantly improves model fits, indicating that free-bound transitions have been observed without previously being identified. This interpretation is corroborated by agreement with a recently developed model-free thermometry technique and presents an important step for precisely characterizing and understanding the complex WDM state of matter.

physics.plasm-ph↗

arXiv2023

Revealing Non-equilibrium and Relaxation in Warm Dense Matter

Experiments creating extreme states of matter almost invariably create non-equilibrium states. These are very interesting in their own right but need to be understood even if the ultimate goal is to probe high-pressure or high-temperature equilibrium properties like the equation of state. Here, we report on the capabilities of the newly developed imaginary time correlation function (ITCF) technique [1] to detect and quantify non-equilibrium in pump-probe experiments fielding time resolved x-ray scattering diagnostics. We find a high sensitivity of the ITCF even to a small fraction of non-equilibrium electrons in the Wigner distribution. The behavior of the ITCF technique is such that modern lasers and detectors should be able to trace the non-equilibrium relaxation from tens of femto-seconds to several 10s of picoseconds without the need for a model.

physics.plasm-ph↗

arXiv2022

Temperature analysis of X-ray Thomson scattering data

The accurate interpretation of experiments with matter at extreme densities and pressures is a notoriously difficult challenge. In a recent work [T.~Dornheim et al., Nature Comm. (in print), arXiv:2206.12805], we have introduced a formally exact methodology that allows extracting the temperature of arbitrarily complex materials without any model assumptions or simulations. Here, we provide a more detailed introduction to this approach and analyze the impact of experimental noise on the extracted temperatures. In particular, we extensively apply our method both to synthetic scattering data and to previous experimental measurements over a broad range of temperatures and wave numbers. We expect that our approach will be of high interest to a gamut of applications, including inertial confinement fusion, laboratory astrophysics, and the compilation of highly accurate equation-of-state databases.

physics.plasm-ph↗

arXiv2022

Electronic Density Response of Warm Dense Matter

Matter at extreme temperatures and pressures -- commonly known as warm dense matter (WDM) in the literature -- is ubiquitous throughout our Universe and occurs in a number of astrophysical objects such as giant planet interiors and brown dwarfs. Moreover, WDM is very important for technological applications such as inertial confinement fusion, and is realized in the laboratory using different techniques. A particularly important property for the understanding of WDM is given by its electronic density response to an external perturbation. Such response properties are routinely probed in x-ray Thomson scattering (XRTS) experiments, and, in addition, are central for the theoretical description of WDM. In this work, we give an overview of a number of recent developments in this field. To this end, we summarize the relevant theoretical background, covering the regime of linear-response theory as well as nonlinear effects, the fully dynamic response and its static, time-independent limit, and the connection between density response properties and imaginary-time correlation functions (ITCF). In addition, we introduce the most important numerical simulation techniques including ab initio path integral Monte Carlo (PIMC) simulations and different thermal density functional theory (DFT) approaches. From a practical perspective, we present a variety of simulation results for different density response properties, covering the archetypal model of the uniform electron gas and realistic WDM systems such as hydrogen. Moreover, we show how the concept of ITCFs can be used to infer the temperature from XRTS measurements of arbitrarily complex systems without the need for any models or approximations. Finally, we outline a strategy for future developments based on the close interplay between simulations and experiments.

physics.plasm-ph↗

arXiv2021

Nanoscale subsurface dynamics of solids upon high-intensity laser irradiation observed by femtosecond grazing-incidence x-ray scattering

Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidification occur at picosecond and nanosecond time scales. Imaging methods, e.g. using x-ray free-electron lasers (XFEL), were hitherto unable to measure the depth-resolved subsurface dynamics of laser-solid interactions with appropriate temporal and spatial resolution. Here we demonstrate picosecond grazing-incidence small-angle x-ray scattering (GISAXS) from laser-produced plasmas using XFEL pulses. Using multi-layer (ML) samples, both the surface ablation and subsurface density dynamics are measured with nanometer depth resolution. Our experimental data challenges the state-of-the-art modeling of matter under extreme conditions and opens new perspectives for laser material processing and high-energy-density science.

physics.plasm-ph↗