arXiv subjects

Thomas Reisinger

Publications and source records attributed to Thomas Reisinger.

13 recordsLinked to original sources

arXiv2026

Probing the memory of a superconducting qubit environment

Achieving fault tolerance with superconducting quantum processors requires qubits to operate within the regime of threshold theorems based on the Born-Markov approximation. This approximation, which models dissipation as constant energy decay into a memoryless environment, breaks down when qubits couple to long-lived two-level systems (TLSs) that become polarized during operation and retain memory of past qubit states. Here, we show that non-Poissonian quantum jump traces carry the information required to distinguish long-lived TLSs from the standard Markovian bath. By fitting the Solomon equations to measured quantum jumps dynamics arising naturally due to thermal fluctuations, we can disentangle the coupling of the qubit to the two environments. Sweeping the qubit frequency reveals distinct peaks, each associated with a TLS that outlives the qubit, providing a handle to understand their microscopic origin.

quant-ph↗

arXiv2025

Liquid metal printing for superconducting circuits

Superconducting circuits are a promising platform for implementing fault-tolerant quantum computers, quantum limited amplifiers, ultra-low power superconducting electronics, and sensors with ultimate sensitivity. Typically, circuit fabrication is realized by standard nanolithography, generally associated with a high level of control over defects and contaminants. Additive approaches have not been used so far since they are expected to be inferior in terms of superconducting properties or quantum coherence. This work shows that liquid-metal based micro-pipette printing is suited for fabricating superconducting lumped-element resonators with high internal quality factors. The applicability of our technique for low-loss superconducting device fabrication and the possibility to locally add metal structures, without affecting any preexisting circuit elements, is a further advantage. Our results open up new avenues in the hardware implementation of scaled-up superconducting quantum computers.

quant-ph↗

arXiv2025

High Impedance Granular Aluminum Ring Resonators

Superconducting inductors with impedance surpassing the resistance quantum, i.e., superinductors, are important for quantum technologies because they enable the development of protected qubits, enhance coupling to systems with small electric dipole moments, and facilitate the study of phase-slip physics. We demonstrate superinductors with densely packed meandered traces of granular aluminum (grAl) with inductances up to $4\,\mu\mathrm{H}$, achieving impedances exceeding $100\,\mathrm{k}\Omega$ in the $4-8\,\mathrm{GHz}$ range. Ring resonators made with grAl meandered superinductors exhibit quality factors on the order of $10^5$ in the single-photon regime and low non-linearity on the order of tens of $\mathrm{Hz}$. Depending on the grAl resistivity, at $10\,\mathrm{Hz}$, we measure frequency noise spectral densities in the range of $10^2$ to $10^3\,\mathrm{Hz}/\sqrt{\mathrm{Hz}}$. In some devices, in the single-photon regime, we observe a positive Kerr coefficient of unknown origin. Using more complex fabrication, the devices could be released from the substrate, either freestanding or suspended on a membrane, thereby further improving their impedance by a factor of three.

quant-ph↗

arXiv2025

Simultaneous sweet-spot locking of gradiometric fluxonium qubits

Efforts to scale up superconducting processors that employ flux-qubits face numerous challenges, among which is the crosstalk created by neighboring flux lines, which are necessary to bias the qubits at the zero-field and $\Phi_0/2$ sweet spots. A solution to this problem is to use symmetric gradiometric loops, which incorporate a flux locking mechanism that, once a fluxon is trapped during cooldown, holds the device at the sweet spot and limits the need for active biasing. We demonstrate this technique by simultaneously locking multiple gradiometric fluxonium qubits in which an aluminum loop retains the trapped fluxon indefinitely. By compensating the inductive asymmetry between the two loops of the design, we are able to lock the effective flux-bias within $\Phi_{eff} = -3 \times 10^{-4} \Phi_0$ from the target, corresponding to only 15 % degradation in $T_{2,E}$ when operated in zero external field. The design strategy demonstrated here reduces integration complexity for flux qubits by minimizing cross-talk and potentially eliminating the need for local flux bias.

quant-ph↗

arXiv2025

The spatial correlation of radiation-induced errors in superconducting devices decays over a millimeter

We perform nanosecond-resolution multiplexed readout on six same-chip superconducting microwave resonators. This allows us to pinpoint the impact positions of ionizing radiation on the chip by measuring the differential time of flight of the generated phonons, inducing correlated errors in the device, thereby implementing an on-chip seismic array. We correlate the phase response of each resonator - a proxy for the absorbed energy - to the distance from the impact point to uncover a millimetric decay length for the phonon-mediated radiation poisoning.

cond-mat.supr-con↗

arXiv2025

Low crosstalk modular flip-chip architecture for coupled superconducting qubits

We present a flip-chip architecture for an array of coupled superconducting qubits, in which circuit components reside inside individual microwave enclosures. In contrast to other flip-chip approaches, the qubit chips in our architecture are electrically floating, which guarantees a simple, fully modular assembly of capacitively coupled circuit components such as qubit, control, and coupling structures, as well as reduced crosstalk between the components. We validate the concept with a chain of three nearest neighbor coupled generalized flux qubits in which the center qubit acts as a frequency-tunable coupler. Using this coupler, we demonstrate a transverse coupling on/off ratio $\approx$ 50, zz-crosstalk $\approx$ 0.7 kHz between resonant qubits and isolation between the qubit enclosures > 60 dB.

quant-ph↗

arXiv2025

High quality superconducting tantalum resonators with beta phase defects

For practical superconducting quantum processors, orders of magnitude improvement in coherence is required, motivating efforts to optimize hardware design and explore new materials. Among the latter, the coherence of superconducting transmon qubits has been shown to improve by forming the qubit capacitor pads from $\alpha$-tantalum, avoiding the meta-stable $\beta$-phase that forms when depositing tantalum at room temperature, and has been previously identified to be a source of microwave losses. In this work, we show lumped element resonators containing $\beta$-phase tantalum in the form of inclusions near the metal-substrate interface with internal quality factors ($Q_\text{i}$) up to $(5.0 \pm 2.5) \times 10^6$ in the single photon regime. They outperform resonators with no sign of the $\beta$-phase in x-ray diffraction and thermal quasi-particle loss. Our results indicate that small concentrations of $\beta$-phase can be beneficial, enhancing critical magnetic fields and potentially, for improving coherence in tantalum based superconducting circuits.

quant-ph↗

arXiv2024

Magnetic bound states embedded in tantalum superconducting thin films

In the fabrication of superconducting devices, both in situ and ex situ processes are utilized, making the removal of unwanted oxide layers and impurities under vacuum conditions crucial. Oxygen descumming and argon milling are standard in situ cleaning methods employed for device preparation. We investigated the impact of these techniques on tantalum superconducting thin films using scanning tunneling microscopy at millikelvin temperatures. We demonstrate that these cleaning methods inadvertently introduce magnetic bound states within the superconducting gap of tantalum, likely by oxygen impurities. These bound states can be detrimental to superconducting qubit devices, as they add to dephasing and energy relaxation.

cond-mat.supr-con↗

arXiv2024

Pure kinetic inductance coupling for cQED with flux qubits

We demonstrate a qubit-readout architecture where the dispersive coupling is entirely mediated by a kinetic inductance. This allows us to engineer the dispersive shift of the readout resonator independent of the qubit and resonator capacitances. We validate the pure kinetic coupling concept and demonstrate various generalized flux qubit regimes from plasmon to fluxon, with dispersive shifts ranging from 60 kHz to 2 MHz at the half-flux quantum sweet spot. We achieve readout performances comparable to conventional architectures with quantum state preparation fidelities of 99.7 % and 92.7 % for the ground and excited states, respectively, and below 0.1 % leakage to non-computational states.

quant-ph↗

arXiv2024

Granular Aluminum Parametric Amplifier for Low-Noise Measurements in Tesla Fields

Josephson junction parametric amplifiers have become essential tools for microwave quantum circuit readout with minimal added noise. Even after improving at an impressive rate in the last decade, they remain vulnerable to magnetic field, which limits their use in many applications such as spin qubits, Andreev and molecular magnet devices, dark matter searches, etc. Kinetic inductance materials, such as granular aluminum (grAl), offer an alternative source of non-linearity with innate magnetic field resilience. We present a non-degenerate amplifier made of two coupled grAl resonators resilient to in-plane magnetic field up to 1 T. It offers 20 dB of gain close to the quantum limit of added noise, with a gain-bandwidth product of 28 MHz and -110 dBm input saturation power.

quant-ph↗

arXiv2023

Reflection imaging with a helium zone plate microscope

Neutral helium atom microscopy is a novel microscopy technique that offers strictly surface-sensitive, non-destructive imaging. Several experiments have been published in recent years where images are obtained by scanning a helium beam spot across a surface and recording the variation in scattered intensity at a fixed total scattering angle $\theta_{sd}$ and fixed incident angle $\theta_{i}$ relative to the overall surface normal. These experiments used a spot obtained by collimating the beam (referred to as helium pinhole microscopy). Alternatively, a beam spot can be created by focusing the beam with an atom optical element. However up till now imaging with a focused helium beam (referred to as helium zone plate microscopy) has only been demonstrated in transmission. Here we present the first reflection images obtained with a focused helium beam. Images are obtained with a spot size (FWHM) down to 4.7 $\mu$m $\pm$ 0.5 $\mu$m, and we demonstrate focusing down to a spot size of about 1 $\mu$m. Furthermore, we present the first experiments measuring the scattering distribution from a focused helium beam spot. The experiments are done by varying the incoming beam angle $\theta_{i}$ while keeping the beam-detector angle $\theta_{sd}$ and the point where the beam spot hits the surface fixed - in essence, a microscopy scale realization of a standard helium atom scattering experiment. Our experiments are done using an electron bombardment detector with adjustable signal accumulation, developed particularly for helium microscopy.

physics.ins-det↗

arXiv2023

Observation of Josephson Harmonics in Tunnel Junctions

Approaches to developing large-scale superconducting quantum processors must cope with the numerous microscopic degrees of freedom that are ubiquitous in solid-state devices. State-of-the-art superconducting qubits employ aluminum oxide (AlO$_x$) tunnel Josephson junctions as the sources of nonlinearity necessary to perform quantum operations. Analyses of these junctions typically assume an idealized, purely sinusoidal current-phase relation. However, this relation is only expected to hold in the limit of vanishingly low-transparency channels in the AlO$_x$ barrier. Here we show that the standard current-phase relation fails to accurately describe the energy spectra of transmon artificial atoms across various samples and laboratories. Instead, a mesoscopic model of tunneling through an inhomogeneous AlO$_x$ barrier predicts percent-level contributions from higher Josephson harmonics. By including these in the transmon Hamiltonian, we obtain orders of magnitude better agreement between the computed and measured energy spectra. The presence and impact of Josephson harmonics has important implications for developing AlO$_x$-based quantum technologies including quantum computers and parametric amplifiers. As an example, we show that engineered Josephson harmonics can reduce the charge dispersion and the associated errors in transmon qubits by an order of magnitude, while preserving their anharmonicity.

quant-ph↗

arXiv2016

Impact of Casimir-Polder interaction on Poisson-spot diffraction at a dielectric sphere

Diffraction of matter-waves is an important demonstration of the fact that objects in nature possess a mixture of particle-like and wave-like properties. Unlike in the case of light diffraction, matter-waves are subject to a vacuum-mediated interaction with diffraction obstacles. Here we present a detailed account of this effect through the calculation of the attractive Casimir-Polder potential between a dielectric sphere and an atomic beam. Furthermore, we use our calculated potential to make predictions about the diffraction patterns to be observed in an ongoing experiment where a beam of indium atoms is diffracted around a silicon dioxide sphere. The result is an amplification of the on-axis bright feature which is the matter-wave analogue of the well-known `Poisson spot' from optics. Our treatment confirms that the diffraction patterns resulting from our complete account of the sphere Casimir-Polder potential are indistinguishable from those found via a large-sphere non-retarded approximation in the discussed experiments, establishing the latter as an adequate model.

quant-ph↗