arXiv subjects

Thomas Schäpers

Publications and source records attributed to Thomas Schäpers.

At least 19 recordsLinked to original sources

arXiv2026

Interplay between Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations in phase-pure GaAs/InAs core/shell nanowires of different lengths

In GaAs/InAs core/shell nanowires, comprising a tubular conducting shell, interference phenomena observed under an axial field and originating from closed-loop states encircling the insulating core, provide an ideal platform for superconducting quantum devices that utilize effects such as Aharonov--Bohm or Altshuler--Aronov--Spivak-type conductance oscillations. Both effects are different in nature with respect to phase rigidity because of interference of non-time-reversed or time-reversed paths, respectively. Since their occurrence is largely governed by averaging effects, which depend on sample dimensions and the transport regime, we present a systematic study of flux-periodic oscillations of phase-pure zinc-blende GaAs/InAs core/shell nanowires as a function of gate voltage for samples with different contact separation lengths. Our analysis shows that with increasing contact separation length, averaging effects result in gradual reduction of $h/e$-periodic Aharonov--Bohm-type oscillations, while the $h/2e$-periodic Altshuler--Aronov--Spivak oscillations and its $h/4e$-periodic higher harmonics are enhanced. The additional phase rigidity seen in the $h/3e$-periodic oscillations is attributed to phase rigidity propagating from the neighbouring lower harmonics. Our tight-binding transport simulations on nanowires of different lengths which contain only a few scattering centers confirm the experimental observations regarding the different harmonics and their phase rigidity. Together, our experimental and simulation findings indicate quasi-ballistic transport with persistent Aharonov--Bohm-, and phase-rigid Altshuler--Aronov--Spivak-type oscillations despite few scattering centers.

cond-mat.mes-hall↗

arXiv2025

Fabrication Optimization of Suspended Stencil Mask Lithography for Multi-Terminal Josephson Junctions

Stencil mask lithography is an advanced technique for fully in-situ fabricating Josephson junctions, which is increasingly being used for multi-terminal Josephson junctions. This study provides information on the optimal mask design and mask reliability. For this, 270 mask designs were systematically fabricated and investigated under scanning electron microscope. Reliable statements are made about mask yield, minimal dimensions, and systematic dependencies on the number of superconducting terminals. We find that stencil mask lithography can be used reliably for fabricating multi-terminal Josephson junctions, enabling lateral mask dimensions down to 40$\,$nm on average.

physics.app-ph↗

arXiv2025

Controlling the magneto-transport properties of magnetic topological insulator thin films from Cr$_x$(Bi$_y\,$Sb$_{1-y}$)$_{2-x}$Te$_3$ via molecular beam epitaxy

In this work we present a systematic in-depth study of how we can alter the magneto-transport properties of magnetic topological insulator thin films by tuning the parameters of the molecular beam epitaxy. First, we show how a varying substrate temperature changes the surface morphology and when chosen properly leads to a high crystal quality. Next, the effect of the chromium concentration on the film roughness and crystal quality is investigated. Finally, both the substrate temperature and the chromium concentration are investigated with respect to their effect on the magneto-transport properties of the magnetic topological insulator thin films. It becomes apparent that the substrate temperature and the chromium concentration can be used to tune the Fermi level of the film which allows to make the material intrinsically charge neutral. A very low chromium concentration furthermore allows to tune the magnetic topological insulator into a regime where strong superconducting correlations can be expected when combining the material with a superconductor.

cond-mat.mes-hall↗

arXiv2025

Frustrated Frustration of Arrays with Four-Terminal Nb-Pt-Nb Josephson Junctions

We study the frustration pattern of a square lattice with in-situ fabricated Nb-Pt-Nb four-terminal Josephson junctions. The four-terminal geometry gives rise to a checker board pattern of alternating fluxes f, f' piercing the plaquettes, which stabilizes the Berezinskii-Kosterlitz-Thouless transition even at irrational flux quanta per plaquette, due to an unequal repartition of integer flux sum f+f' into alternating plaquettes. This type of frustrated frustration manifests as a beating pattern of the dc resistance, with state configurations at the resistance dips gradually changing between the conventional zero-flux and half-flux states. Hence, the four-terminal Josephson junction array offers a promising platform to study previously unexplored flux and vortex configurations, and provides an estimate on the spatial expansion of the four-terminal Josephson junction central weak link area.

cond-mat.supr-con↗

arXiv2025

Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations in the quasi-ballistic regime in phase-pure GaAs/InAs core/shell nanowires

The realization of various qubit systems based on high-quality hybrid superconducting quantum devices, is often achieved using semiconductor nanowires. For such hybrid devices, a good coupling between the superconductor and the conducting states in the semiconductor wire is crucial. GaAs/InAs core/shell nanowires with an insulating core, and a conductive InAs shell fulfill this requirement, since the electronic states are strongly confined near the surface. However, maintaining a good crystal quality in the conducting shell is a challenge for this type of nanowire. In this work, we present phase-pure zincblende GaAs/InAs core/shell nanowires and analyze their low-temperature magnetotransport properties. We observe pronounced magnetic flux quantum periodic oscillations, which can be attributed to a combination of Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations. From the gate and temperature dependence of the conductance oscillations, as well as from supporting theoretical transport calculations, we conclude that the conducting states in the shell are in the quasi-ballistic transport regime, with few scattering centers, but nevertheless leading to an Altshuler-Aronov-Spivak correction that dominates at small magnetic field strengths. Our results demonstrate that phase-pure zincblende GaAs/InAs core/shell nanowires represent a very promising alternative semiconductor nanowire-based platform for hybrid quantum devices.

cond-mat.mes-hall↗

arXiv2025

Superconducting Diode Effect in Selectively-Grown Topological Insulator based Josephson Junctions

The Josephson diode effect, where the critical current magnitude depends on its direction, arises when both time-reversal and inversion symmetries are broken - often achieved by a combination of spin-orbit interaction and applied magnetic fields. Taking advantage of the strong spin-orbit coupling inherent in three-dimensional topological insulators, we study this phenomenon in Nb/Bi$_{0.8}$Sb$_{1.2}$Te$_3$/Nb Josephson weak-link junctions. Under an in-plane magnetic field perpendicular to the current direction, we observe a pronounced Josephson diode effect with efficiencies up to 7%. A crucial component of this behavior is the non-sinusoidal current-phase relationship and an anomalous phase shift, which we attribute to the presence of a ballistic supercurrent component due to the surface states. These findings open up new avenues for harnessing and controlling the Josephson diode effect in topological material systems.

cond-mat.mes-hall↗

arXiv2024

Fabrication and characterization of InAs nanowire-based quantum dot structures utilizing buried bottom gates

Semiconductor nanowires can be utilized to create quantum dot qubits. The formation of quantum dots is typically achieved by means of bottom gates created by a lift-off process. As an alternative, we fabricated flat buried bottom gate structures by filling etched trenches in a Si substrate with sputtered TiN, followed by mechanical polishing. This method achieved gate line pitches as small as 60 nm. The gate fingers have low gate leakage. As a proof of principle, we fabricated quantum dot devices using InAs nanowires placed on the gate fingers. These devices exhibit single electron tunneling and Coulomb blockade.

cond-mat.mes-hall↗

arXiv2024

Superconductive coupling and Josephson diode effect in selectively-grown topological insulator based three-terminal junctions

The combination of an ordinary s-type superconductor with three-dimensional topological insulators creates a promising platform for fault-tolerant topological quantum computing circuits based on Majorana braiding. The backbone of the braiding mechanism are three-terminal Josephson junctions. It is crucial to understand the transport in these devices for further use in quantum computing applications. We present low-temperature measurements of topological insulator-based three-terminal Josephson junctions fabricated by a combination of selective-area growth of $\mathrm{Bi_{0.8}Sb_{1.2}Te_3}$ and shadow mask evaporation of Nb. This approach allows for the in-situ fabrication of Josephson junctions with an exceptional interface quality, important for the study of the proximity-effect. We map out the transport properties of the device as a function of bias currents and prove the coupling of the junctions by the observation of a multi-terminal geometry induced diode effect. We find good agreement of our findings with a resistively and capacitively shunted junction network model.

cond-mat.mes-hall↗

arXiv2024

In-plane magnetic field driven conductance modulations in topological insulator kinks

We present low-temperature magnetoconductance measurements on Bi$_{1.5}$Sb$_{0.5}$Te$_{1.8}$Se$_{1.2}$ kinks with ribbon-shaped legs. The conductance displays a clear dependence on the in-plane magnetic field orientation. The conductance modulation is consistent with orbital effect-driven trapping of the topological surface states on different side facets of the legs of the kink, which affects their transmission across the kink. This magnetic field-driven trapping and conductance pattern can be explained with a semiclassical picture and is supported by quantum transport simulations. The interpretation is corroborated by varying the angle of the kink and analyzing the temperature dependence of the observed magnetoconductance pattern, indicating the importance of phase coherence along the cross section perimeter of the kink legs.

cond-mat.mes-hall↗

arXiv2024

Topological insulator based axial superconducting quantum interferometer structures

Nanoscale superconducting quantum interference devices (SQUIDs) are fabricated in-situ from a single Bi$_{0.26}$Sb$_{1.74}$Te$_{3}$ nanoribbon that is defined using selective-area growth and contacted with superconducting Nb electrodes via a shadow mask technique. We present $h/(2e)$ magnetic flux periodic interference in both, fully and non-fully proximitized nanoribbons. The pronounced oscillations are explained by interference effects of coherent transport through topological surface states surrounding the cross-section of the nanoribbon.

cond-mat.mes-hall↗

arXiv2024

Flux-periodic supercurrent oscillations in an Aharonov-Bohm-type nanowire Josephson junction

Phase winding effects in hollow semiconductor nanowires with superconducting shells have been proposed as a route to engineer topological superconducting states. We investigate GaAs/InAs core/shell nanowires with half-shells of epitaxial aluminium as a potential platform for such devices, where the thin InAs shell confines the electron wave function around the GaAs core. With normal contacts we observed pronounced $h/e$ flux periodic oscillations in the magnetoconductance, indicating the presence of a tubular conductive channel in the InAs shell. Conversely, the switching current in Josephson junctions oscillates with approximately half that period, i.e. $h/2e$, indicating transport via Andreev transport processes in the junction enclosing threading magnetic flux. On these structures, we systematically studied the gate-, field-, and temperature-dependent evolution of the supercurrent. Results indicate that Andreev transport processes can occur about the wire circumference indicating full proximitization of the InAs shell from the half-shell superconducting contacts.

cond-mat.mes-hall↗

arXiv2023

Single in situ Interface Characterization Composed of Niobium and a Selectively Grown (Bi$_{1-x}$Sb$_x$)$_2$Te$_3$ Topological Insulator Nanoribbon

With increasing attention in Majorana physics for possible quantum bit applications, a large interest has been developed to understand the properties of the interface between a $s$-type superconductor and a topological insulator. Up to this point the interface analysis was mainly focused on in situ prepared Josephson junctions, which consist of two coupled single interfaces or to ex-situ fabricated single interface devices. In our work we utilize a novel fabrication process, combining selective area growth and shadow evaporation which allows the characterization of a single in situ fabricated Nb/$\mathrm{(Bi_{0.15}Sb_{0.85})_2Te_3}$ nano interface. The resulting high interface transparency is apparent by a zero bias conductance increase by a factor of 1.7. Furthermore, we present a comprehensive differential conductance analysis of our single in situ interface for various magnetic fields, temperatures and gate voltages. Additionally, density functional theory calculations of the superconductor/topological insulator interface are performed in order to explain the peak-like shape of our differential conductance spectra and the origin of the observed smearing of conductance features.

cond-mat.mes-hall↗

arXiv2023

Induced Superconductivity in Hybrid Au/YBa2Cu3O7-x Electrodes on Vicinal Substrates

Superconducting electrodes are an integral part of hybrid Josephson junctions used in many applications including quantum technologies. We report on the fabrication and characterization of superconducting hybrid Au/YBa2Cu3O7-x (YBCO) electrodes on vicinal substrates. In these structures, superconducting CuO2-planes face the gold film, resulting in a higher value and smaller variation of the induced energy gap compared to the conventional Au/YBCO electrodes based on films with the c-axis normal to the substrate surface. Using scanning tunneling microscopy, we observe an energy gap of about 10-17 meV at the surface of the 15- nm-thick gold layer deposited in situ atop the YBCO film. To study the origin of this gap, we fabricate nanoconstrictions from the Au/YBCO heterostructure and measure their electrical transport characteristics. The conductance of the nanoconstrictions shows a series of dips due to multiple Andreev reflections in YBCO and gold providing clear evidence of the superconducting nature of the gap in gold. We consider the Au/YBCO electrodes to be a versatile platform for hybrid Josephson devices with a high operating temperature.

cond-mat.supr-con↗

arXiv2023

Current-induced magnetization switching in a magnetic topological insulator heterostructure

We present the current-induced switching of the internal magnetization direction in a magnetic topological insulator/topological insulator heterostructure in the quantum anomalous Hall regime. The switching process is based on the bias current dependence of the coercive field, which is attributed to the effect of the spin-orbit torque provided by the unpolarized bias current. Increasing the bias current leads to a decrease in the magnetic order in the sample. When the applied current is subsequently reduced, the magnetic moments align with an externally applied magnetic field, resulting in repolarization in the opposite direction. This includes a reversal of the spin polarisation and hence a reversal of the chiral edge mode. Possible applications in spintronic devices are discussed.

cond-mat.mes-hall↗

arXiv2023

Fourier transformation based analysis routine for intermixed longitudinal and transversal hysteretic data for the example of a magnetic topological insulator

We present a symmetrization routine that optimizes and eases the analysis of data featuring the anomalous Hall effect. This technique can be transferred to any hysteresis with (point-)symmetric behaviour. The implementation of the method is demonstrated exemplarily using intermixed longitudinal and transversal data obtained from a chromium-doped ternary topological insulator revealing a clear hysteresis. Furthermore, by introducing a mathematical description of the anomalous Hall hysteresis based on the error function precise values of the height and coercive field are determined.

cond-mat.mes-hall↗

arXiv2023

Aharonov-Bohm interference and phase-coherent surface-state transport in topological insulator rings

We present low-temperature magnetotransport measurements on selectively-grown Sb$_2$Te$_3$-based topological insulator ring structures. These topological insulator ring geometries display clear Aharonov-Bohm oscillations in the conductance originating from phase-coherent transport around the ring. The temperature dependence of the oscillation amplitude indicates that the Aharonov-Bohm oscillations originate from ballistic transport along the ring arms. The oscillations can therefore be attributed to topological surface states, which can maintain a quasi-ballistic transport regime in the presence of disorder. Further insight on the phase coherence is gained by comparing with similar Aharonov-Bohm-type oscillations in topological insulator nanoribbons exposed to an axial magnetic field. Here, quasi-ballistic phase-coherent transport is confirmed for closed-loop topological surface states in transverse direction enclosing the cross-section of the nanoribbon. In contrast, the appearance of universal conductance fluctuations indicates phase-coherent transport in the diffuse regime, which is attributed to bulk carrier transport. Thus, it appears that even in the presence of diffusive $p$-type charge carriers in Aharonov-Bohm ring structures, phase-coherent quasi-ballistic transport of topologically protected surface states is maintained over long distances.

cond-mat.mes-hall↗

arXiv2023

Ballistic surface channels in fully in situ defined Bi$_4$Te$_3$ Josephson junctions with aluminum contacts

In this letter we report on the electrical transport properties of Bi$_4$Te$_3$ in a Josephson junction geometry using superconducting Al electrodes with a Ti interdiffusion barrier. Bi$_4$Te$_3$ is proposed to be a dual topological insulator, for which due to time-reversal and mirror symmetry both a strong topological insulator phase as well as a crystalline topological phase co-exist. The formation of a supercurrent through the Bi$_4$Te$_3$ layer is explained by a two-step process. First, due to the close proximity of the Al/Ti electrodes a superconducting gap is induced within the Bi$_4$Te$_3$ layer right below the electrodes. The size of this gap is determined by analysing multiple Andreev reflections (MARs) identified within the devices differential resistance at low voltage biases. Second, based on the Andreev reflection and reverse Andreev reflection processes a supercurrent establishes in the weak link region in between these two proximity coupled regions. Analyses of the temperature dependency of both the critical current as well as MARs indicate mostly ballistic supercurrent contributions in between the proximitized Bi$_4$Te$_3$ regions even though the material is characterized by a semi-metallic bulk phase. The presence of these ballistic modes gives indications on the topological nature of Bi$_4$Te$_3$.

cond-mat.mes-hall↗

arXiv2023

Supercurrent in Bi$_4$Te$_3$ Topological Material-Based Three-Terminal Junctions

In an in-situ prepared three-terminal Josephson junction based on the topological insulator Bi$_4$Te$_3$ and the superconductor Nb the transport properties are studied. The differential resistance maps as a function of two bias currents reveal extended areas of Josephson supercurrent including coupling effects between adjacent superconducting electrodes. The observed dynamics for the coupling of the junctions is interpreted using a numerical simulation of a similar geometry based on a resistively and capacitively shunted Josephson junction model. The temperature dependency indicates that the device behaves similar to prior experiments with single Josephson junctions comprising topological insulators weak links. Irradiating radio frequencies to the junction we find a spectrum of integer Shapiro steps and an additional fractional step, which is interpreted by a skewed current-phase relationship. In a perpendicular magnetic field we observe Fraunhofer-like interference patterns of the switching currents.

cond-mat.supr-con↗