arXiv subjects

Thomas Schweizer

Publications and source records attributed to Thomas Schweizer.

10 recordsLinked to original sources

arXiv2026

EON-SII: Design of a transportable picosecond stellar intensity interferometer for compact-star astrophysics

Stellar intensity interferometry (SII) measures correlations in photon-arrival fluctuations recorded by telescopes observing bright celestial sources. It can resolve angular scales far smaller than those accessible to a single optical telescope and is largely insensitive to atmospheric turbulence. After the first demonstration of SII on Sirius in 1956, Hanbury Brown and Twiss used the technique to measure the diameters of 32 stars. More recently, VERITAS, MAGIC, H.E.S.S., and CTAO's LST-1 have revived the method, although observations remain restricted to bright targets because of their optical design, optimized for gamma-ray astrophysics, rather than SII. We present EON-SII, the design and performance of a two-telescope intensity interferometer intended to extend the SII technique to compact targets at magnitudes of about V=8.5 up to V=10.7. Each transportable telescope has a 4-m diameter mirror, approximately 9m2 collecting area, an actively aligned 18-panel primary mirror, and Cassegrain optics specified to concentrate at least 90% of the light within 3 arcsec. A fibre-free spectrograph covers 400-550 nm at R~7000-8000 and is designed to provide of order 1000 statistically independent spectral channels.

astro-ph.IM↗

arXiv2026

Adapting the 23m LST-North mechanical structure design for the strong Chile seismic environment

The 23-meter-diameter Large-Sized Telescope (LST) is the largest size telescope of the next generation Cherenkov Telescope Array (CTA). The first telescope, LST-1, was installed at the Roque de los Muchachos Observatory (ORM) on La Palma at an altitude of 2,250 m in 2018 and has been in operation since 2019. Its ultra-lightweight structure (110 tons) enables extremely rapid repositioning (180{\deg} in 18 seconds) and has been designed to withstand extreme environmental conditions, including storms and winds exceeding speed up to 200 km/h. To deploy the same solid telescope design at the CTA Southern Observatory in Chile, the structure must be adapted to the significantly higher seismic demands of the site. To address this challenge, the Max Planck Institute for Physics (MPP) has proposed the integration of a seismic isolation system with the proven LST-1 structural design. This approach substantially reduces seismic loads and dynamic amplification, thereby avoiding extensive structural modifications and enabling the existing telescope design to be transferred to the Chilean site with only minor adaptations. In this contribution, we present the proposed seismic isolation concept and its feasibility studies. MPP is responsible for the mechanical structure of the LST and has validated the concept through detailed finite-element analyses and long-term structural lifetime assessments.

astro-ph.IM↗

arXiv2026

Direct comparison of SiPMs and PMTs in operation with a bright background and prospects of using SPADs as truly digital sensors

The use of silicon photomultipliers (SiPMs) alongside conventional photomultiplier tubes (PMTs) is a remarkable technological development in modern ground-based very high energy gamma-ray astronomy. SiPMs exhibit comparable or even higher photon detection efficiencies (PDEs) than PMTs. The sensitivity of a PMT matches well the spectral shape of Cherenkov radiation from extended air showers. In contrast to a PMT, the sensitivity of a SiPM is shifted toward longer wavelengths, where the intensity of light of night sky (LoNS), considered as unwanted noise, increases significantly. It is obvious that a SiPM with a higher PDE will indeed measure more Cherenkov light than a PMT, but it will also detect significantly higher LoNS noise; the question is which factor will predominate in the signal-to-noise-ratio (SNR). To compare the performance of a PMT with that of a SiPM, we built SiPM-based modules and installed these and operated in parallel in the imaging camera of the 17 m diameter MAGIC telescope. Our long-term studies show that SiPM, despite their higher PDE, can deliver only a comparable to PMT performance. As already the name SiPM suggests, we use these semiconductor sensors analogously to classical PMTs: We amplify their small signals, digitize, and calibrate the converted amplitudes. Although SiPM is essentially a digital sensor, its common-anode design does not allow one to directly profit from it. Numerous arrays of single-photon avalanche diodes (SPADs) are being developed in various laboratories worldwide. Unlike SiPM, SPAD arrays digitize the incident photons from the outset and count their number. We will dwell on the potential further developments of SPADs.

astro-ph.IM↗

arXiv2015

M-Functionals of Multivariate Scatter

This survey provides a self-contained account of $M$-estimation of multivariate scatter. In particular, we present new proofs for existence of the underlying $M$-functionals and discuss their weak continuity and differentiability. This is done in a rather general framework with matrix-valued random variables. By doing so we reveal a connection between Tyler's (1987) $M$-functional of scatter and the estimation of proportional covariance matrices. Moreover, this general framework allows us to treat a new class of scatter estimators, based on symmetrizations of arbitrary order. Finally these results are applied to $M$-estimation of multivariate location and scatter via multivariate $t$-distributions.

math.ST↗

arXiv2015

Instrumentation for comparing night sky quality and atmospheric conditions of CTA site candidates

Many atmospheric and climatic criteria have to be taken into account for the selection of a suitable site for the next generation of imaging air-shower Cherenkov telescopes, the "Cherenkov Telescope Array" CTA. Such data are not available with sufficient precision, thus a comparison of the proposed sites and final decision based on a comprehensive characterization is impossible. Identical cross-calibrated instruments have been developed which allow for precise comparison between sites, the cross-validation of existing data, and the ground-validation of satellite data. The site characterization work package of the CTA consortium opted to construct and deploy 9 copies of an autonomous multi-purpose weather sensor, incorporating an infrared cloud sensor, a newly developed sensor for measuring the light of the night sky, and an All-Sky-Camera, the whole referred to as Autonomous Tool for Measuring Observatory Site COnditions PrEcisely (ATMOSCOPE). We present here the hardware that was combined into the ATMOSCOPE and characterize its performance.

astro-ph.IM↗

arXiv2013

Novel Photo Multiplier Tubes for the Cherenkov Telescope Array Project

Currently the standard light sensors for imaging atmospheric Cherenkov telescopes are the classical photo multiplier tubes that are using bialkali photo cathodes. About eight years ago we initiated an improvement program with the Photo Multiplier Tube (PMT) manufacturers Hamamatsu (Japan), Electron Tubes Enterprises (England) and Photonis (France) for the needs of imaging atmospheric Cherenkov telescopes. As a result, after about 40 years of stagnation of the peak Quantum Efficiency (QE) on the level of 25-27%, new PMTs appeared with a peak QE of 35%. These have got the name super-bialkali. The second significant upgrade has happened very recently, as a result of a dedicated improvement program for the candidate PMT for Cherenkov Telescope Array. The latter is going to be the next generation major instrument in the field of very high energy gamma astrophysics and will consist of over 100 telescopes of three different sizes of 23m, 12m and 4-7m, located both in southern and northern hemispheres. Now PMTs with average peak QE of approximately 40% became available. Also, the photo electron collection efficiency of the previous generation PMTs of 80- 90% has been enhanced towards 95-98% for the new ones. The after-pulsing of novel PMTs has been reduced towards the level of 0.02% for the set threshold of 4 photo electrons. We will report on the PMT development work by the companies Electron Tubes Enterprises and Hamamatsu Photonics K.K. show the achieved results and the current status.

astro-ph.IM↗

arXiv2013

Characterization of the optical and X-ray properties of the northwestern wisps in the Crab Nebula

We have studied the wisps to the north-west of the Crab pulsar as part of a multi-wavelength campaign in the visible and in X-rays. Optical observations were obtained using the Nordic Optical Telescope in La Palma and X-ray observations were made with the Chandra X-ray Observatory. The observing campaign took place from 2010 October until 2012 September. About once per year we observe wisps forming and peeling off from (or near) the region commonly associated with the termination shock of the pulsar wind. We find that the exact locations of the northwestern wisps in the optical and in X-rays are similar but not coincident, with X-ray wisps preferentially located closer to the pulsar. This suggests that the optical and X-ray wisps are not produced by the same particle distribution. Our measurements and their implications are interpreted in terms of a Doppler-boosted ring model that has its origin in magne- tohydrodynamic (MHD) modelling. While the Doppler boosting factors inferred from the X-ray wisps are consistent with current MHD simulations of pulsar wind nebulae (PWN), the optical boosting factors are not, and typically exceed values from MHD simulations by about a factor of 3.

astro-ph.HE↗

arXiv2011

New improved Sum-Trigger system for the MAGIC telescopes

In 2007 a prototype of a new analog Sum-Trigger was installed in the MAGIC I telescope, which lowered the trigger threshold from 55 GeV to 25 GeV and led to the detection of pulsed gamma radiation from the Crab pulsar. To eliminate the need for manual tuning and maintenance demanded by that first prototype, a new setup with fully automatic calibration was designed recently. The key element of the new circuit is a novel, continuously variable analog delay line that enables the temporal equalization of the signals from the camera photo sensors, which is crucial for the efficient detection of low-energy showers. A further improvement is the much larger trigger area consisting of a fully revised configuration of overlapping summing patches. The new system will be installed on both telescopes, MAGIC I and II, enabling stereo observation in Sum-Trigger mode. This will significantly improve the sensitivity in the very low energy regime of 20 to 100 GeV, which is essential in particular for detailed pulsar studies, as well as the observation of high-redshift AGNs and distant GRB events. Here we like to present the results of functionality tests of a fully working prototype and the basic design of the final system.

astro-ph.IM↗

arXiv2009

Technical Performance of the MAGIC Telescopes

The MAGIC-I telescope is the largest single-dish Imaging Atmospheric Cherenkov telescope in the world. A second telescope, MAGIC-II, will operate in coincidence with MAGIC-I in stereoscopic mode. MAGIC-II is a clone of MAGIC-I, but with a number of significant improvements, namely a highly pixelized camera with a wider trigger area, improved optical analog signal transmission and a 2-4 GSps fast readout. All the technical elements of MAGIC-II were installed by the end of 2008. The telescope is currently undergoing commissioning and integration with MAGIC-I. An update of the technical performance of MAGIC-I, a description of all the hardware elements of MAGIC-II and first results of the combined technical performance of the two telescopes will be reported.

astro-ph.IM↗

arXiv2009

Undulator-Based Production of Polarized Positrons

Full exploitation of the physics potential of a future International Linear Collider will require the use of polarized electron and positron beams. Experiment E166 at the Stanford Linear Accelerator Center (SLAC) has demonstrated a scheme in which an electron beam passes through a helical undulator to generate photons (whose first-harmonic spectrum extended to 7.9MeV) with circular polarization, which are then converted in a thin target to generate longitudinally polarized positrons and electrons. The experiment was carried out with a one-meter-long, 400-period, pulsed helical undulator in the Final Focus Test Beam (FFTB) operated at 46.6GeV. Measurements of the positron polarization have been performed at five positron energies from 4.5 to 7.5MeV. In addition, the electron polarization has been determined at 6.7MeV, and the effect of operating the undulator with a ferrofluid was also investigated. To compare the measurements with expectations, detailed simulations were made with an upgraded version of Geant4 that includes the dominant polarization-dependent interactions of electrons, positrons, and photons with matter. The measurements agree with calculations, corresponding to 80% polarization for positrons near 6MeV and 90% for electrons near 7MeV.

physics.ins-det↗