arXiv subjects

Thomas Stevenson

Publications and source records attributed to Thomas Stevenson.

11 recordsLinked to original sources

arXiv2026

Dynamic Trajectory Analysis of Meteoroids Showing Minimal Deceleration

Meteoroids decelerate and ablate as they descend through the atmosphere, however a portion of instrumentally observed meteors show little measurable deceleration and remain poorly characterised. These are referred to as minimally decelerating objects (MDOs). The traditional alpha-beta method of dynamic trajectory analysis cannot reliably determine their preatmospheric masses or rates of ablation. We present a new approach for estimating the ballistic coefficients (alpha) and mass loss parameters (beta) of MDOs, allowing their inclusion in dynamic analyses. This new method employs bulk ablation coefficients derived from instrumentally observed meteorite falls and large meteor shower bodies. It is applied to MDOs comprising approximately one-third of the Global Fireball Observatory (GFO) 2014 - 2024 dataset. Our results show that MDOs are predominantly small objects occupying a distinct region of alpha-beta space. Material types can be identified using supplementary data such as emission spectra, which we demonstrate using observations of 10 small iron meteoroids. This methodology expands the range of meteoroid populations accessible to dynamic trajectory analysis, providing new constraints on meteorite deposition and the compositional diversity of near-Earth objects.

astro-ph.EP↗

arXiv2026

A Cloud-Based Tool for Meteorite Recovery Using Drones and Machine Learning

We present a cloud-based tool that uses drones and machine learning to help recover instrumentally observed meteorite falls. We showcase a collection of improvements made upon previous iterations of our system, as well as detail the successes and limitations of this technique when applied to observed meteorite falls in South and Western Australia. This tool is available to the meteoritics research community upon request at https://find.gfo.rocks.

astro-ph.EP↗

arXiv2026

Radiation Total Dose for PRIMA: Cold Exposure with Alpha Particles

The Probe far-Infrared Mission for Astrophysics (PRIMA) is a far-infrared (24-261 micron wavelengths) probe-class space observatory currently under Phase A study, which promises orders-of-magnitude improvement in mapping speed over its predecessors. PRIMA will field exquisitely sensitive kilopixel arrays of kinetic inductance detectors (KIDs) for the Far-Infrared Enhanced Survey Spectrometer (FIRESS) instrument. PRIMA will orbit in space at the Sun-Earth L2 point, where Planck found the energetic particle flux to be about 300/min/cm2. Thus, the possible effect of a high fluence of energetic particles on the detector sensitivity must be characterized. Previous work has suggested that bombardment of KIDs by ions can reduce the quasiparticle lifetime (Barends et. al. 2009), but the conditions of the experiment were not representative of a detector which is continuously held at sub-Kelvin temperatures in the energetic particle environment of L2 orbit. To better replicate the damage which would be produced by energetic particles in this environment, we developed a fully cryogenic irradiation experiment in which a stepper motor controls a screen which can block or reveal an alpha particle emitter. This setup can be used to irradiate aluminum KID arrays fabricated for FIRESS to well-controlled dose levels. In this work, we calculate the damage dose expected for a 5-year mission in L2 orbit, and we irradiate an array to approximately 62 percent of this level. Before and after irradiation, we measure the quasiparticle lifetimes, resonant frequencies, and quality factors of the detectors.

astro-ph.IM↗

arXiv2026

In Situ Interferometric Spatial Mapping Of A Microwave Kinetic Inductance Detector Array

We present a method of spatially mapping microwave kinetic inductance detector (MKID) arrays, in a dark setup. MKIDs are superconducting natively multiplexed resonators which enable kilopixel arrays, such as for the proposed Probe far-Infrared Mission for Astrophysics (PRIMA). In such telescope applications one must map the spatial location of each MKID with their individual resonance frequencies. Traditional LED arrays or beam-mapping methods become increasingly difficult as pixel spacing decreases, e.g., 900 {\mu}m separated MKIDs in the spectrometer module of PRIMA. Our new mapping technique uses a cryogenic interferometer in reflection mode. As on-resonance signals reflect from an MKID, they accrue a phase proportional to the path-length, exactly corresponding to their physical distance on the feedline. Specifically, we use a superconducting transmission line that has nonlinear kinetic inductance. The slow-wave structure of this nonlinear device is designed to have a signal speed of 0.64% the speed of light, enabling a compact system. Current biasing this line allows for varying the wave speed and ensuring that the phase measured is periodic within a nulling interferometric mode. Using this setup, we measure a length ordering that reflects the bimodal MKID distribution of a 44 pixel array of MKIDs designed for PRIMA which contains the same spacing as the final kilopixel array design.

astro-ph.IM↗

arXiv2023

Monolithic Kilopixel Silicon Microlens Arrays for Future Far-Infrared Observatories

Future far-infrared astrophysics observatories will require focal plane arrays containing thousands of ultra-sensitive, superconducting detectors, each of which needs to be optically coupled to the telescope. At longer wavelengths, many approaches have been developed including feedhorn arrays and macroscopic arrays of lenslets. However, with wavelengths as short as 25 microns, optical coupling in the far-infrared remains challenging. In this paper, we present a novel approach for fabricating far-infrared monolithic silicon microlens arrays using grayscale lithography and deep reactive ion etching. The design, fabrication, and characterization of the microlens arrays are discussed. We compare the designed and fabricated lens profile, and calculate that the fabricated lenses will achieve 84% encircled power for the designed detector, which is only 3% less than the designed performance. We also present methods developed for anti-reflection coating microlens arrays and for a silicon-to-silicon die bonding process to hybridize microlens arrays with detector arrays.

astro-ph.IM↗

arXiv2022

Extragalactic Science with the Experiment for Cryogenic Large-aperture Intensity Mapping

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne cryogenic telescope that will survey the spectrum of diffuse emission from both the Milky Way and the cosmic web to probe star formation, the interstellar medium, and galaxy evolution across cosmic time. EXCLAIM's primary extragalactic science survey maps 305 deg$^2$ along the celestial equator with an R=512 spectrometer over the frequency range \nu=420-540 GHz, targeting emission of the [CII] line over redshifts 2.5<z<3.5 and several CO lines for z<1. Cross-correlation with galaxy redshift catalogs isolates line emission from the large-scale structure at target redshifts. In this paper, we forecast the sensitivity for both the two-point and conditional one-point cross-correlation. We predict that EXCLAIM will detect both the [CII]-QSO cross-power spectrum and the conditional voxel intensity distribution (CVID) at various redshifts under a broad range of [CII] intensity models, allowing it to differentiate among these models in the literature. These forecasts for the power spectra include the effects of line interlopers and continuum foreground contamination. We then convert the joint [CII] constraints from both the cross-power spectrum and the CVID into constraints on the [CII] halo luminosity-mass relation $L_\mathrm{[CII]}(M)$ model parameters and the star formation rate density (SFRD) from [CII] emission. We also develop sensitivity estimates for CO, showing the ability to differentiate between models.

astro-ph.CO↗

arXiv2022

Developing a New Generation of Integrated Micro-Spec Far Infrared Spectrometers for the EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM)

The current state of far-infrared astronomy drives the need to develop compact, sensitive spectrometers for future space and ground-based instruments. Here we present details of the $\rm \mu$-Spec spectrometers currently in development for the far-infrared balloon mission EXCLAIM. The spectrometers are designed to cover the $\rm 555 - 714\ \mu$m range with a resolution of $\rm R\ =\ \lambda / \Delta\lambda\ =\ 512$ at the $\rm 638\ \mu$m band center. The spectrometer design incorporates a Rowland grating spectrometer implemented in a parallel plate waveguide on a low-loss single-crystal Si chip, employing Nb microstrip planar transmission lines and thin-film Al kinetic inductance detectors (KIDs). The EXCLAIM $\rm \mu$-Spec design is an advancement upon a successful $\rm R = 64\ \mu$-Spec prototype, and can be considered a sub-mm superconducting photonic integrated circuit (PIC) that combines spectral dispersion and detection. The design operates in a single $M{=}2$ grating order, allowing one spectrometer to cover the full EXCLAIM band without requiring a multi-order focal plane. The EXCLAIM instrument will fly six spectrometers, which are fabricated on a single 150 mm diameter Si wafer. Fabrication involves a flip-wafer-bonding process with patterning of the superconducting layers on both sides of the Si dielectric. The spectrometers are designed to operate at 100 mK, and will include 355 Al KID detectors targeting a goal of NEP ${\sim}8\times10^{-19}$ $\rm W/\sqrt{Hz}$. We summarize the design, fabrication, and ongoing development of these $\rm \mu$-Spec spectrometers for EXCLAIM.

astro-ph.IM↗

arXiv2022

Measuring the electron neutrino mass using the electron capture decay of 163Ho

While the mass differences between neutrino mass states are known, their absolute masses and mass hierarchy have not yet been determined. Determining the mass of neutrinos provides access to physics beyond the Standard Model and the resulting value has implications for the growth of large-scale structure in the universe over cosmic history. Because of the importance of the topic, a number of efforts are already underway to determine the mass of neutrinos including direct kinematic measurements and indirect measurements of astrophysical phenomena that constrain the sum of the mass eigenstates through models of cosmic evolution. Here, we advocate for a collaborative international effort to perform a kinematic determination of the effective electron neutrino mass using calorimetric measurements of the decay of 163Ho. This effort is justified by the success of current experiments using the technique, its high benefit-to-cost ratio, the value of approaches with different systematic errors, and the value of measuring the electron neutrino mass rather than the electron anti-neutrino mass.

nucl-ex↗

arXiv2021

Overview and status of EXCLAIM, the experiment for cryogenic large-aperture intensity mapping

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne far-infrared telescope that will survey star formation history over cosmological time scales to improve our understanding of why the star formation rate declined at redshift z < 2, despite continued clustering of dark matter. Specifically,EXCLAIM will map the emission of redshifted carbon monoxide and singly-ionized carbon lines in windows over a redshift range 0 < z < 3.5, following an innovative approach known as intensity mapping. Intensity mapping measures the statistics of brightness fluctuations of cumulative line emissions instead of detecting individual galaxies, thus enabling a blind, complete census of the emitting gas. To detect this emission unambiguously, EXCLAIM will cross-correlate with a spectroscopic galaxy catalog. The EXCLAIM mission uses a cryogenic design to cool the telescope optics to approximately 1.7 K. The telescope features a 90-cm primary mirror to probe spatial scales on the sky from the linear regime up to shot noise-dominated scales. The telescope optical elements couple to six {\mu}-Spec spectrometer modules, operating over a 420-540 GHz frequency band with a spectral resolution of 512 and featuring microwave kinetic inductance detectors. A Radio Frequency System-on-Chip (RFSoC) reads out the detectors in the baseline design. The cryogenic telescope and the sensitive detectors allow EXCLAIM to reach high sensitivity in spectral windows of low emission in the upper atmosphere. Here, an overview of the mission design and development status since the start of the EXCLAIM project in early 2019 is presented.

astro-ph.IM↗

arXiv2016

Detectors and cooling technology for direct spectroscopic biosignature characterization

Direct spectroscopic biosignature characterization (hereafter "biosignature characterization") will be a major focus for future space observatories equipped with coronagraphs or starshades. Our aim in this article is to provide an introduction to potential detector and cooling technologies for biosignature characterization. We begin by reviewing the needs. These include nearly noiseless photon detection at flux levels as low as $<0.001~\textrm{photons}~s^{-1}~\textrm{pixel}^{-1}$ in the visible and near-IR. We then discuss potential areas for further testing and/or development to meet these needs using non-cryogenic detectors (EMCCD, HgCdTe array, HgCdTe APD array), and cryogenic single photon detectors (MKID arrays and TES microcalorimeter arrays). Non-cryogenic detectors are compatible with the passive cooling that is strongly preferred by coronagraphic missions, but would add non-negligible noise. Cryogenic detectors would require active cooling, but in return deliver nearly quantum limited performance. Based on the flight dynamics of past NASA missions, we discuss reasonable vibration expectations for a large UV-Optical-IR space telescope (LUVOIR) and preliminary cooling concepts that could potentially fit into a vibration budget without being the largest element. We believe that a cooler that meets the stringent vibration needs of a LUVOIR is also likely to meet those of a starshade-based Habitable Exoplanet Imaging Mission.

astro-ph.IM↗

arXiv2014

CLASS: The Cosmology Large Angular Scale Surveyor

The Cosmology Large Angular Scale Surveyor (CLASS) is an experiment to measure the signature of a gravita-tional-wave background from inflation in the polarization of the cosmic microwave background (CMB). CLASS is a multi-frequency array of four telescopes operating from a high-altitude site in the Atacama Desert in Chile. CLASS will survey 70\% of the sky in four frequency bands centered at 38, 93, 148, and 217 GHz, which are chosen to straddle the Galactic-foreground minimum while avoiding strong atmospheric emission lines. This broad frequency coverage ensures that CLASS can distinguish Galactic emission from the CMB. The sky fraction of the CLASS survey will allow the full shape of the primordial B-mode power spectrum to be characterized, including the signal from reionization at low $\ell$. Its unique combination of large sky coverage, control of systematic errors, and high sensitivity will allow CLASS to measure or place upper limits on the tensor-to-scalar ratio at a level of $r=0.01$ and make a cosmic-variance-limited measurement of the optical depth to the surface of last scattering, $τ$.

astro-ph.IM↗