arXiv subjects

Thomas Taubner

Publications and source records attributed to Thomas Taubner.

12 recordsLinked to original sources

arXiv2026

Understanding inhomogeneous crystallization dynamics of phase-change materials in the vicinity of metallic nanoantennas

Optical metasurfaces composed of metallic or dielectric scatterers (meta-atoms) promise a powerful way of tailoring light-matter interactions. Phase-change materials (PCMs) are prime candidates for non-volatile resonance tuning of metasurfaces based on a refractive index change. Precise resonance control can be achieved by locally applying laser pulses to crystallize a PCM, modifying the dielectric surrounding of meta-atoms. However, the complex crystallization kinetics of PCMs in the vicinity of metallic meta-atoms have not been studied yet. Here, we experimentally investigate metallic dimer antennas on top of the PCM Ge3Sb2Te6 and address these nanoantennas with laser pulses. Our study reveals inhomogeneous crystallization caused by the absorption and heat conduction of the metallic nanoantennas. A self-consistent multiphysics model, including electromagnetic, thermal, and phase-transition processes, is employed to simulate the crystallization and understand the resulting resonance shift of the antennas. This model enables the optimization of the laser parameters and the geometry of the meta-atoms to achieve an optimal crystallization pattern and resonance shift. Our work paves the way towards complex antenna geometries optimized for local addressing of PCMs to achieve sophisticated crystallization patterns, enabling on-demand programming of individual nanoantennas within metasurfaces.

physics.optics↗

arXiv2026

Fast Programming of In-Plane Hyperbolic Phonon Polariton Optics Through van der Waals Crystals using the Phase-Change Material In3SbTe2

The high directionality of hyperbolic phonon polaritons (HPhPs) has opened radically new ways to route and steer the flow of energy at the nanoscale. However, launching HPhPs requires fabricating efficient and precisely aligned polariton launching structures, which remains time-consuming and expensive with conventional nanofabrication approaches. Recently, using optical laser pulses, polariton launching structures have been programmed into the plasmonic phase-change material In3SbTe2. Here, we leverage this approach to reconfigure HPhPs by programming a variety of launching and confining nanostructures through {\alpha}-MoO3 flakes deposited onto In3SbTe2. Importantly, optical programming after flake deposition enables alignment of launching stripes to the [001]-axis of the flake, essential to control the directional polariton propagation. We showcase these capabilities in a variety of structures: i) an optically programmed disk, showing similar tuning ranges and confinement as focusing by gold disks; and ii) a cavity for in-plane HPhPs created by reconfiguring the single disk to a double disk structure, tailoring the confinement by simply reprogramming the disk distance. Our fabrication scheme offers fast turn-around times, flexible alignment and the opportunity to reconfigure the structures. Thus, it is a fast, efficient and versatile way to tailor propagation and confinement of highly directional polaritons on demand.

physics.optics↗

arXiv2025

Tailoring hBN's Phonon Polaritons with the Plasmonic Phase-Change Material In3SbTe2

Polaritons in van-der-Waals materials (vdWM) promise high confinement and multiple tailoring options by optical structures, e.g., resonators, launching structures and lenses. These optical structures are conventionally fabricated using cumbersome multi-process lithography techniques. In contrast, phase-change materials (PCMs) offer fast and reconfigurable programming of optical structures. PCMs can reversibly be switched between two stable phases with distinct permittivities by local heating, e.g., by optical laser pulses. While the well-known dielectric PCM GeSbTe-alloys feature only a permittivity change, the PCM In3SbTe2 can be switched between a dielectric and metallic phase. This makes In3SbTe2 promising for programming metallic launching structures. Here, we demonstrate direct optical programming and thereby rapid prototyping of optical launching structures in In3SbTe2 to tailor and confine polaritons in vdWM. We combine the vdWM hexagonal boron nitride (hBN) with In3SbTe2 and optically program circular resonators for hBN's phonon polaritons through hBN into In3SbTe2. We investigate the polariton resonators with near-field optical microscopy. Demonstrating the reconfigurability, we decrease the resonator diameter to increase the polariton confinement. Finally, we fabricate focusing structures for hBN's phonon polaritons whose focal point is changed in a second post-processing step. We promote In3SbTe2 as a versatile platform for rapid prototyping of polariton optics in vdWM.

physics.optics↗

arXiv2024

Infrared Beam-shaping on Demand via Tailored Geometric Phase Metasurfaces employing the Plasmonic Phase-Change Material In3SbTe2

Conventional optical elements are bulky and limited to specific functionalities, contradicting the increasing demand of miniaturization and multi-functionalities. Optical metasurfaces enable tailoring light-matter interaction at will, especially important for the infrared spectral range which lacks commercially available beam-shaping elements. While the fabrication of those metasurfaces usually requires cumbersome techniques, direct laser writing promises a simple and convenient alternative. Here, we exploit the non-volatile laser-induced insulator-to-metal transition of the plasmonic phase-change material In3SbTe2 (IST) for optical programming of large-area metasurfaces for infrared beam-shaping. We tailor the geometric phase of metasurfaces with rotated crystalline IST rod antennas to achieve beam steering, lensing, and beams carrying orbital angular momenta. Finally, we investigate multi-functional and cascaded metasurfaces exploiting enlarged holography, and design a single metasurface creating two different holograms along the optical axis. Our approach facilitates fabrication of large-area metasurfaces within hours, enabling rapid-prototyping of customized infrared meta-optics for sensing, imaging and quantum information.

physics.optics↗

arXiv2024

Super-resolution imaging of nanoscale inhomogeneities in hBN-covered and encapsulated few-layer graphene

Encapsulating few-layer graphene (FLG) in hexagonal boron nitride (hBN) can cause nanoscale inhomogeneities in the FLG, including changes in stacking domains and topographic defects. Due to the diffraction limit, characterizing these inhomogeneities is challenging. Recently, the visualization of stacking domains in encapsulated four-layer graphene (4LG) has been demonstrated with phonon polariton (PhP)-assisted near-field imaging. However, the underlying coupling mechanism and ability to image subdiffractional-sized inhomogeneities remain unknown. Here, we retrieve direct replicas and magnified images of subdiffractional-sized inhomogeneities in hBN-covered trilayer graphene (TLG) and encapsulated 4LG, enabled by the hyperlensing effect. This hyperlensing effect is mediated by hBN's hyperbolic PhP that couple to the FLG's plasmon polaritons. Using near-field microscopy, we identify the coupling by determining the polariton dispersion in hBN-covered TLG to be stacking-dependent. Our work demonstrates super-resolution and magnified imaging of inhomogeneities, paving the way for the realization of homogeneous encapsulated FLG transport samples to study correlated physics.

physics.optics↗

arXiv2023

Mid infrared near-field fingerprint spectroscopy of the 2D electron gas in LaAlO$_3$/SrTiO$_3$ at low temperatures

Confined electron systems, such as 2D electron gases (2DEGs), 2D materials, or topological insulators show great technological promise but their susceptibility to defects often results in nanoscale inhomogeneities with unclear origins. Scattering-type scanning near-field optical microscopy (s-SNOM) is useful to investigate buried confined electron systems non-destructively with nanoscale resolution, however, a clear separation of carrier concentration and mobility was often impossible in s-SNOM. Here, we predict a previously inaccessible characteristic "fingerprint" response of the prototypical LaAlO$_3$/SrTiO$_3$ 2DEG, and verify this using a state-of-the-art tunable narrow-band laser in mid-infrared cryo-s-SNOM at 8 K. Our modelling allows us to separate the influence of carrier concentration and mobility on fingerprint spectra and to characterize 2DEG inhomogeneities on the nanoscale. This spatially resolved information about the local electronic properties can be used to identify the origin of inhomogeneities in confined electron systems, making the s-SNOM fingerprint response a valuable tool for nanoelectronics and quantum technology.

cond-mat.mes-hall↗

arXiv2023

Direct programming of confined Surface Phonon Polariton Resonators using the plasmonic Phase-Change Material In$_3$SbTe$_2$

Tailoring light-matter interaction is essential to realize nanophotonic components. It can be achieved with surface phonon polaritons (SPhPs), an excitation of photons coupled with phonons of polar crystals, which also occur in 2d materials such as hexagonal boron nitride or anisotropic crystals. Ultra-confined resonances are observed by restricting the SPhPs to cavities. Phase-change materials (PCMs) enable non-volatile programming of these cavities based on a change in the refractive index. Recently, the new plasmonic PCM In$_3$SbTe$_2$ (IST) was introduced which can be reversibly switched from an amorphous dielectric state to a crystalline metallic one in the entire infrared to realize numerous nanoantenna geometries. However, reconfiguring SPhP resonators to modify the confined polaritons modes remains elusive. Here, we demonstrate direct programming of confined SPhP resonators by phase-switching IST on top of a polar silicon carbide crystal and investigate the strongly confined resonance modes with scanning near-field optical microscopy. Reconfiguring the size of the resonators themselves result in enhanced mode confinements up to a value of $\lambda/35$. Finally, unconventional cavity shapes with complex field patterns are explored as well. This study is a first step towards rapid prototyping of reconfigurable SPhP resonators that can be easily transferred to hyperbolic and anisotropic 2d materials.

physics.optics↗

arXiv2022

Experimental observation of ABCB stacked tetralayer graphene

In tetralayer graphene, three inequivalent layer stackings should exist, however, only rhombohedral (ABCA) and Bernal (ABAB) stacking have so far been observed. The three stacking sequences differ in their electronic structure, with the elusive third stacking (ABCB) being unique as it is predicted to exhibit an intrinsic bandgap as well as locally flat bands around the K points. Here, we use scattering-type scanning near-field optical microscopy and confocal Raman microscopy to identify and characterize domains of ABCB stacked tetralayer graphene. We differentiate between the three stacking sequences by addressing characteristic interband contributions in the optical conductivity between 0.28 and 0.56 eV with amplitude and phase-resolved near-field nano-spectroscopy. By normalizing adjacent flakes to each other, we achieve good agreement between theory and experiment, allowing for the unambiguous assignment of ABCB domains in tetralayer graphene. These results establish near-field spectroscopy at the interband transitions as a semi-quantitative tool, enabling the recognition of ABCB domains in tetralyer graphene flakes and therefore, providing a basis to study correlation physics of this exciting phase.

cond-mat.mes-hall↗

arXiv2022

Observing 0D subwavelength-localized modes at ~100 THz protected by weak topology

Topological photonic crystals (TPhCs) provide robust manipulation of light with built-in immunity to fabrication tolerances and disorder. Recently, it was shown that TPhCs based on weak topology with a dislocation inherit this robustness and further host topologically protected lower-dimensional localized modes. However, TPhCs with weak topology at optical frequencies have not been demonstrated so far. Here, we use scattering-type scanning near field optical microscopy to verify mid-bandgap zero-dimensional light localization close to 100 THz in a TPhC with nontrivial Zak phase and an edge dislocation. We show that due to the weak topology, differently extended dislocation centers induce similarly strong light localization. The experimental results are supported by full-field simulations. Along with the underlying fundamental physics, our results lay a foundation for the application of TPhCs based on weak topology in active topological nanophotonics, and nonlinear and quantum optic integrated devices due to their strong and robust light localization.

physics.optics↗

arXiv2019

Surface Polariton-Like s-Polarized Waveguide Modes in Switchable Dielectric Thin-Films on Polar Crystals

Surface phonon polaritons (SPhP) and surface plasmon polaritons (SPP), evanescent modes supported by media with negative permittivity, are a fundamental building block of nanophotonics. These modes are unmatched in terms of field enhancement and spatial confinement, and dynamical all-optical control can be achieved e.g. by employing phase-change materials (PCMs). However, the excitation of surface polaritons in planar structures is intrinsically limited to p-polarization. On the contrary, waveguide modes in high-permittivity films can couple to both p- and s-polarized light, and in thin films, their confinement can become comparable to surface polaritons. Here we demonstrate that the s-polarized waveguide mode in a thin Ge$_3$Sb$_2$Te$_6$ (GST) film features a similar dispersion, confinement, and electric field enhancement as the SPhP mode of the silicon carbide (SiC) substrate, while even expanding the allowed frequency range. Moreover, we experimentally show that switching the GST film grants non-volatile control over the SPhP and the waveguide mode dispersions. We provide an analytical model for the description of the GST/SiC waveguide mode and show that our concept is applicable to the broad variety of polar crystals throughout the infrared spectral range. As such, complementarily to the polarization-limited surface polaritons, the s-polarized PCM waveguide mode constitutes a promising additional building block for nanophotonic applications.

physics.optics↗

arXiv2018

Probing hyperbolic polaritons using infrared attenuated total reflectance micro-spectroscopy

Hyperbolic polariton modes are highly appealing for a broad range of applications in nanophotonics, including surfaced enhanced sensing, sub-diffractional imaging and reconfigurable metasurfaces. Here we show that attenuated total reflectance micro-spectroscopy (ATR) using standard spectroscopic tools can launch hyperbolic polaritons in a Kretschmann-Raether configuration. We measure multiple hyperbolic and dielectric modes within the naturally hyperbolic material hexagonal boron nitride as a function of different isotopic enrichments and flake thickness. This overcomes the technical challenges of measurement approaches based on nanostructuring, or scattering scanning nearfield optical microscopy. Ultimately, our ATR approach allows us to compare the optical properties of small-scale materials prepared by different techniques systematically

physics.optics↗

arXiv2015

Hyperbolic phonon-polaritons in boron nitride for near-field optical imaging

Optical imaging beyond the diffraction limit was one of the primary motivations for negative-index metamaterials, resulting in Pendry's perfect lens and the more attainable superlens. While these approaches offer sub-diffractional resolution, they do not provide a mechanism for magnification of the image. Hyperbolic (or indefinite-permittivity) metamaterials have been theoretically considered and experimentally demonstrated to provide simultaneously subdiffractive imaging and magnification; however, they are plagued with low efficiency and complex fabrication. In this work, we present theoretical and experimental studies of near-field optical imaging through a flat slab of the low-loss, natural hyperbolic material, hexagonal boron nitride (hBN). This thin hBN layer exhibits wavelength-dependent multifunctional operations, offering both an enhanced near-field imaging of single buried objects with down to lambda/32 resolution (0.4 um at lambda=12.8 um), as well as enabling an enlarged reconstruction of the geometric outline of the investigated objects. Both the excellent resolution and the multifunctional operation can be explained based on the volume-confined, wavelength-dependent propagation angle of Type I hyperbolic polaritons. Our results provide both the understanding of near-field imaging performance through this natural hyperbolic media, as well as inspire their exciting potential for guiding and sensing of light at an extreme sub-diffractional scale.

cond-mat.mtrl-sci↗