SearcharxivSearch

arXiv subjects

Thomas W. LeBrun

Publications and source records attributed to Thomas W. LeBrun.

8 recordsLinked to original sources

Low-power, agile electro-optic frequency comb spectrometer for integrated sensors

Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ μ \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ μ\mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing.

physics.optics

Bound-state-in-continuum guided modes in a multilayer electro-optically active photonic integrated circuit platform

Bound states in the continuum (BICs) are localized states existing within a continuous spectrum of delocalized waves. Emerging multilayer photonic integrated circuit (PIC) platforms allow implementation of low index 1D guided modes within a high-index 2D slab mode continuum; however, conventional wisdom suggests that this always leads to large radiation losses. Here we demonstrate low-loss BIC guided modes for multiple mode polarizations and spatial orders in single- and multi-ridge low-index waveguides within a two-layer heterogeneously integrated electro-optically active photonic platform. The transverse electric (TE) polarized quasi-BIC guided mode with low, <1.4 dB/cm loss enables a Mach-Zehnder electro-optic amplitude modulator comprising a single straight Si3N4 ridge waveguide integrated with a continuous LiNbO3 slab layer. The abrupt optical transitions at the edges of the slab function as compact and efficient directional couplers eliminating the need for additional components. The modulator exhibits a low insertion loss of 2.3 dB and a high extinction ratio of 25 dB. The developed general theoretical model may enable innovative BIC-based approaches for important PIC functions, such as agile spectral filtering and switching, and may suggest new photonic architectures for quantum and neural network applications based on controlled interactions between multiple guided and delocalized modes.

physics.optics

GPU enabled real-time optical frequency comb spectroscopy and photonic readout

We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is readily amenable to both self-heterodyne and dual comb spectrometers for molecular spectroscopy as well as photonic readout where the approach's agility, speed, and simplicity are expected to enable future improvements and applications.

physics.ins-det

Collision-resolved pressure sensing

Heat and pressure are ultimately transmitted via quantized degrees of freedom, like gas particles and phonons. While a continuous Brownian description of these noise sources is adequate to model measurements with relatively long integration times, sufficiently precise measurements can resolve the detailed time dependence coming from individual bath-system interactions. We propose the use of nanomechanical devices operated with impulse readout sensitivity around the ``standard quantum limit'' to sense ultra-low gas pressures by directly counting the individual collisions of gas particles on a sensor. We illustrate this in two paradigmatic model systems: an optically levitated nanobead and a tethered membrane system in a phononic bandgap shield.

quant-ph

Intrinsically accurate sensing with an optomechanical accelerometer

We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceable displacement measurements. The resulting intrinsic accuracy was evaluated over a wide frequency range by comparing to a primary vibration calibration system and local gravity. The average agreement was found to be 2.1 % for the calibration system between 0.1 kHz and 15 kHz and better than 0.2 % for the static acceleration. This capability has the potential to replace costly external calibrations and improve the accuracy of inertial guidance systems and remotely deployed accelerometers. Due to the fundamental nature of the intrinsic accuracy approach, it could be extended to other optomechanical transducers, including force and pressure sensors.

physics.ins-det

MAQRO -- BPS 2023 Research Campaign Whitepaper

The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed that the proposal is feasible but that several critical challenges remain, and key technologies need to be developed. These new technologies will open up the potential for achieving additional science objectives. The proposed research campaign aims to advance the state of the art and to perform the first macroscopic quantum experiments in space. Experiments on the ground, in micro-gravity, and in space will drive the proposed research campaign during the current decade to enable the implementation of MAQRO within the subsequent decade.

quant-ph

Broadband Optomechanical Sensing at the Thermodynamic Limit

Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and gravitational waves. A fundamental limit to sensitivity for these measurements is energy exchange with the environment as described by the fluctuation-dissipation theorem. While the limiting sensitivity can be increased by increasing the mass or reducing the damping of the mechanical sensing element, these design tradeoffs lead to larger detectors or limit the range of mechanical frequencies that can be measured, excluding the bandwidth requirements for many real-world applications. We report on a microfabricated optomechanical sensing platform based on a Fabry-Perot microcavity and show that when operating as an accelerometer it can achieve nearly ideal broadband performance at the thermodynamic limit (Brownian motion of the proof mass) with the highest sensitivity reported to date over a wide frequency range ($314\,nm \cdot s^{-2}/\sqrt{Hz}$ over 6.8 kHz). This approach is applicable to a range of measurements from pressure and force sensing to seismology and gravimetry, including searches for new physics such as non-Newtonian gravity or dark matter.

physics.app-ph