arXiv subjects

Tiangui You

Publications and source records attributed to Tiangui You.

5 recordsLinked to original sources

arXiv2026

Monolithic integration of diverse crystalline thin films on diamond for near-junction thermal management

The pursuit of extreme miniaturization and high power in 6G RF front-ends has cast thermal dissipation as the central challenge. Here, we have demonstrated the monolithic integration of functionally distinct single-crystal thin films, including \b{eta}-Ga2O3, Si, GaN, and LiTaO3, onto a single diamond substrate using a multi-step transfer printing technique. Focusing on the critical \b{eta}-Ga2O3/diamond interface, we achieve an exceptional interfacial thermal conductance (ITC) of 149 MW m-2 K-1 through ultra-high vacuum (UHV) annealing, creating an atomically sharp interface featuring covalent bonding. Vibrational electron energy-loss spectroscopy (EELS) analysis combining with molecular dynamics (MD) simulations reveal that distinctive interfacial phonon modes at the \b{eta}-Ga2O3/diamond heterointerface dominate ultrahigh ITC. We experimentally demonstrate that by improving the ITC, the thermal resistance (Rth) of a diamond-based \b{eta}-Ga2O3 MOSFET is driven to a record-low value of 1.58 K mm W-1, underscoring the critical role of interface engineering in near-junction thermal management for diamond-integrated devices. This work demonstrates a scalable, diamond-based monolithic integration platform designed to solve the near-junction thermal challenges in high-power RF front-ends.

cond-mat.mtrl-sci↗

arXiv2022

Silicon carbide for integrated photonics

The recent progress in chip-scale integrated photonics has stimulated the rapid development of material platforms with desired optical properties. Among the different material platforms that are currently investigated, the third-generation semiconductor, silicon carbide (SiC), offers the broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index, and CMOS-compatible device fabrication process. Here, we provide an overview of SiC-based integrated photonics, presenting the latest progress on investigating its basic optical and optoelectronic properties, as well as the recent developments in the fabrication of several typical approaches for light confinement structures that form the basic building blocks for low-loss, high functional and industry-compatible integrated photonic platform. Moreover, recent works employing SiC as optically-readable spin hosts for quantum information applications are also summarized and discussed. As a still-developing integrated photonic platform, the prospects and challenges of SiC material platform in the field of integrated photonics are also discussed, followed by potential solutions.

physics.optics↗

arXiv2021

Thermal Visualization of Buried Interfaces by Transient and Steady-State Responses of Time-Domain Thermoreflectance

Thermal resistances from interfaces impede heat dissipation in micro/nanoscale electronics, especially for high-power electronics. Despite the growing importance of understanding interfacial thermal transport, advanced thermal characterization techniques which can visualize thermal conductance across buried interfaces, especially for nonmetal-nonmetal interfaces, are still under development. This work reports a dual-modulation-frequency TDTR mapping technique to visualize the thermal conduction across buried semiconductor interfaces for beta-Ga2O3-SiC samples. Both the beta-Ga2O3 thermal conductivity and the buried beta-Ga2O3-SiC thermal boundary conductance (TBC) are visualized for an area of 200 um x 200 um. Areas with low TBC values ( smaller than 20 MW/m2-K) are successfully identified on the TBC map, which correspond to weakly bonded interfaces caused by high-temperature annealing. The steady-state temperature rise (detector voltage), usually ignored in TDTR measurements, is found to be able to probe TBC variations of the buried interfaces without the limit of thermal penetration depth. This technique can be applied to detect defects/voids in deeply buried heterogeneous interfaces non-destructively, and also opens a door for the visualization of thermal conductance in nanoscale nonhomogeneous structures.

cond-mat.mtrl-sci↗

arXiv2020

Wafer-scale Heterogeneous Integration of Monocrystalline \b{eta}-Ga2O3 Thin Films on SiC for Thermal Management by Ion-Cutting Technique

The ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates make \b{eta}-Ga2O3 promising for applications of next-generation power electronics while its thermal conductivity is at least one order of magnitude lower than other wide/ultrawide bandgap semiconductors. To avoid the degradation of device performance and reliability induced by the localized Joule-heating, aggressive thermal management strategies are essential, especially for high-power high-frequency applications. This work reports a scalable thermal management strategy to heterogeneously integrate wafer-scale monocrystalline \b{eta}-Ga2O3 thin films on high thermal conductivity SiC substrates by ion-cutting technique. The thermal boundary conductance (TBC) of the \b{eta}-Ga2O3-SiC interfaces and thermal conductivity of the \b{eta}-Ga2O3 thin films were measured by Time-domain Thermoreflectance (TDTR) to evaluate the effects of interlayer thickness and thermal annealing. Materials characterizations were performed to understand the mechanisms of thermal transport in these structures. The results show that the \b{eta}-Ga2O3-SiC TBC values increase with decreasing interlayer thickness and the \b{eta}-Ga2O3 thermal conductivity increases more than twice after annealing at 800 oC due to the removal of implantation-induced strain in the films. A Callaway model is built to understand the measured thermal conductivity. Small spot-to-spot variations of both TBC and Ga2O3 thermal conductivity confirm the uniformity and high-quality of the bonding and exfoliation. Our work paves the way for thermal management of power electronics and \b{eta}-Ga2O3 related semiconductor devices.

physics.app-ph↗

arXiv2020

Precise tuning of the superconducting properties of Mn-doped Al films for transition edge sensors by ion-implantation

Magnetic impurities in metallic superconductors are important for both fundamental and applied sciences. In this study, we focused on dilute Mn-doped aluminum (AlMn) films, which are common superconducting materials used to make transition edge sensors (TES). We developed a multi-energy ion-implantation technique to make AlMn films. Compared with frequently used sputtering techniques, ion-implantation provides more precise and reliable control of the Mn doping concentration in the AlMn films.The ion implantation also enables us to quantitatively analyze the superconducting transition temperature curve as a function of the Mn doping concentration. We found that Mn dopants act as magnetic impurities and suppression of superconductivity is counteracted by the antiferromagnetic Ruderman Kittel Kasuya Yosida interaction among Mn dopants. The RKKY interaction can be tuned through defect engineering in the ion-implantation process and through post-implantation annealing.

cond-mat.mtrl-sci↗