arXiv subjects

Tianyi Zhang

Publications and source records attributed to Tianyi Zhang.

At least 361 records · Page 20Linked to original sources

arXiv2021

RFI Mitigation for One-bit UWB Radar Systems

Radio frequency interference (RFI) mitigation is critical to the proper operation of ultra-wideband (UWB) radar systems since RFI can severely degrade the radar imaging capability and target detection performance. In this paper, we address the RFI mitigation problem for one-bit UWB radar systems. A one-bit UWB system obtains its signed measurements via a low-cost and high rate sampling scheme, referred to as the Continuous Time Binary Value (CTBV) technology. This sampling strategy compares the signal to a known threshold varying with slow-time and therefore can be used to achieve a rather high sampling rate and quantization resolution with rather simple and affordable hardware. This paper establishes a proper data model for the RFI sources and proposes a novel RFI mitigation method for the one-bit UWB radar system that uses the CTBV sampling technique. Specifically, we first model the RFI sources as a sum of sinusoids with frequencies fixed during the coherent processing interval (CPI) and we exploit the sparsity of the RFI spectrum. We extend a majorization-minimization based 1bRELAX algorithm, referred to as 1bMMRELAX, to estimate the RFI source parameters from the signed measurements obtained by using the CTBV sampling strategy. We also devise a new fast frequency initialization method based on the Alternating Direction Method of Multipliers (ADMM) methodology for the extended 1bMMRELAX algorithm to significantly improve its computational efficiency. Moreover, an ADMM-based sparse method is introduced to recover the desired radar echoes using the estimated RFI parameters. Both simulated and experimental results are presented to demonstrate that our proposed algorithm outperforms the existing digital integration method, especially for severe RFI cases.

eess.SP↗

arXiv2021

Sinusoidal Parameter Estimation from Signed Measurements via Majorization-Minimization Based RELAX

We consider the problem of sinusoidal parameter estimation using signed observations obtained via one-bit sampling with fixed as well as time-varying thresholds. In a previous paper, a relaxation-based algorithm, referred to as 1bRELAX, has been proposed to iteratively maximize the likelihood function. However, the exhaustive search procedure used in each iteration of 1bRELAX is time-consuming. In this paper, we present a majorization-minimization (MM) based 1bRELAX algorithm, referred to as 1bMMRELAX, to enhance the computational efficiency of 1bRELAX. Using the MM technique, 1bMMRELAX maximizes the likelihood function iteratively using simple FFT operations instead of the more computationally intensive search used by 1bRELAX. Both simulated and experimental results are presented to show that 1bMMRELAX can significantly reduce the computational cost of 1bRELAX while maintaining its excellent estimation accuracy.

eess.SP↗

arXiv2021

Joint RFI Mitigation and Radar Echo Recovery for One-Bit UWB Radar

Radio frequency interference (RFI) mitigation and radar echo recovery are critically important for the proper functioning of ultra-wideband (UWB) radar systems using one-bit sampling techniques. We recently introduced a technique for one-bit UWB radar, which first uses a majorization-minimization method for RFI parameter estimation followed by a sparse method for radar echo recovery. However, this technique suffers from high computational complexity due to the need to estimate the parameters of each RFI source separately and iteratively. In this paper, we present a computationally efficient joint RFI mitigation and radar echo recovery framework to greatly reduce the computational cost. Specifically, we exploit the sparsity of RFI in the fast-frequency domain and the sparsity of radar echoes in the fast-time domain to design a one-bit weighted SPICE (SParse Iterative Covariance-based Estimation) based framework for the joint RFI mitigation and radar echo recovery of one-bit UWB radar. Both simulated and experimental results are presented to show that the proposed one-bit weighted SPICE framework can not only reduce the computational cost but also outperform the existing approach for decoupled RFI mitigation and radar echo recovery of one-bit UWB radar.

eess.SP↗

arXiv2021

Revisiting Few-sample BERT Fine-tuning

This paper is a study of fine-tuning of BERT contextual representations, with focus on commonly observed instabilities in few-sample scenarios. We identify several factors that cause this instability: the common use of a non-standard optimization method with biased gradient estimation; the limited applicability of significant parts of the BERT network for down-stream tasks; and the prevalent practice of using a pre-determined, and small number of training iterations. We empirically test the impact of these factors, and identify alternative practices that resolve the commonly observed instability of the process. In light of these observations, we re-visit recently proposed methods to improve few-sample fine-tuning with BERT and re-evaluate their effectiveness. Generally, we observe the impact of these methods diminishes significantly with our modified process.

cs.CL↗

arXiv2021

Learning to Stop with Surprisingly Few Samples

We consider a discounted infinite horizon optimal stopping problem. If the underlying distribution is known a priori, the solution of this problem is obtained via dynamic programming (DP) and is given by a well known threshold rule. When information on this distribution is lacking, a natural (though naive) approach is "explore-then-exploit," whereby the unknown distribution or its parameters are estimated over an initial exploration phase, and this estimate is then used in the DP to determine actions over the residual exploitation phase. We show: (i) with proper tuning, this approach leads to performance comparable to the full information DP solution; and (ii) despite common wisdom on the sensitivity of such "plug in" approaches in DP due to propagation of estimation errors, a surprisingly "short" (logarithmic in the horizon) exploration horizon suffices to obtain said performance. In cases where the underlying distribution is heavy-tailed, these observations are even more pronounced: a ${\it single \, sample}$ exploration phase suffices.

cs.LG↗

arXiv2021

Second- and third-order optical susceptibilities in bidimensional semiconductors near excitons states

Semiconducting Transition Metal Dichalcogenides (TMDs) have significant nonlinear optical effects. In this work we have used second-harmonic generation (SHG) and the four-wave mixing (FWM) spectroscopy in resonance with the excitons in MoS2, MoSe2, and WS2 monolayers to characterize the nonlinear optical properties of these materials. We show that trions and excitons are responsible for enhancing the nonlinear optical response, and determine the exciton and trion energies by comparing with the photoluminescence spectra. Moreover, we extract the second and third order optical sheet susceptibility near exciton energies and compare with values found in the literature. We also demonstrate the ability to generate different nonlinear effects in a wide spectral range in the visible region for monolayer MoS2, opening the possibility of using two-dimensional materials for nonlinear optoelectronic and photonic applications.

cond-mat.mes-hall↗

arXiv2020

Identifying Mislabeled Data using the Area Under the Margin Ranking

Not all data in a typical training set help with generalization; some samples can be overly ambiguous or outrightly mislabeled. This paper introduces a new method to identify such samples and mitigate their impact when training neural networks. At the heart of our algorithm is the Area Under the Margin (AUM) statistic, which exploits differences in the training dynamics of clean and mislabeled samples. A simple procedure - adding an extra class populated with purposefully mislabeled threshold samples - learns a AUM upper bound that isolates mislabeled data. This approach consistently improves upon prior work on synthetic and real-world datasets. On the WebVision50 classification task our method removes 17% of training data, yielding a 1.6% (absolute) improvement in test error. On CIFAR100 removing 13% of the data leads to a 1.2% drop in error.

cs.LG↗

arXiv2020

Physical Wireless Resource Virtualization for Software-Defined Whole-Stack Slicing

Radio access network (RAN) virtualization is gaining more and more ground and expected to re-architect the next-generation cellular networks. Existing RAN virtualization studies and solutions have mostly focused on sharing communication capacity and tend to require the use of the same PHY and MAC layers across network slices. This approach has not considered the scenarios where different slices require different PHY and MAC layers, for instance, for radically different services and for whole-stack research in wireless living labs where novel PHY and MAC layers need to be deployed concurrently with existing ones on the same physical infrastructure. To enable whole-stack slicing where different PHY and MAC layers may be deployed in different slices, we develop PV-RAN, the first open-source virtual RAN platform that enables the sharing of the same SDR physical resources across multiple slices. Through API Remoting, PV-RAN enables running paravirtualized instances of OpenAirInterface (OAI) at different slices without requiring modifying OAI source code. PV-RAN effectively leverages the inter-domain communication mechanisms of Xen to transport time-sensitive I/Q samples via shared memory, making the virtualization overhead in communication almost negligible. We conduct detailed performance benchmarking of PV-RAN and demonstrate its low overhead and high efficiency. We also integrate PV-RAN with the CyNet wireless living lab for smart agriculture and transportation.

cs.NI↗

arXiv2020

Generative Adversarial Network based Heuristics for Sampling-based Path Planning

Sampling-based path planning is a popular methodology for robot path planning. With a uniform sampling strategy to explore the state space, a feasible path can be found without the complex geometric modeling of the configuration space. However, the quality of initial solution is not guaranteed and the convergence speed to the optimal solution is slow. In this paper, we present a novel image-based path planning algorithm to overcome these limitations. Specifically, a generative adversarial network (GAN) is designed to take the environment map (denoted as RGB image) as the input without other preprocessing works. The output is also an RGB image where the promising region (where a feasible path probably exists) is segmented. This promising region is utilized as a heuristic to achieve nonuniform sampling for the path planner. We conduct a number of simulation experiments to validate the effectiveness of the proposed method, and the results demonstrate that our method performs much better in terms of the quality of initial solution and the convergence speed to the optimal solution. Furthermore, apart from the environments similar to the training set, our method also works well on the environments which are very different from the training set.

cs.RO↗

arXiv2020

Exempla Gratis (E.G.): Code Examples for Free

Modern software engineering often involves using many existing APIs, both open source and, in industrial coding environments, proprietary. Programmers reference documentation and code search tools to remind themselves of proper common usage patterns of APIs. However, high-quality API usage examples are computationally expensive to curate and maintain, and API usage examples retrieved from company-wide code search can be tedious to review. We present a tool, EG, that mines codebases and shows the common, idiomatic usage examples for API methods. EG was integrated into Facebook's internal code search tool for the Hack language and evaluated on open-source GitHub projects written in Python. EG was also compared against code search results and hand-written examples from a popular programming website called ProgramCreek. Compared with these two baselines, examples generated by EG are more succinct and representative with less extraneous statements. In addition, a survey with Facebook developers shows that EG examples are preferred in 97 percent of cases.

cs.SE↗

arXiv2020

Can Steering Wheel Detect Your Driving Fatigue?

Automated Driving System (ADS) has attracted increasing attention from both industrial and academic communities due to its potential for increasing the safety, mobility and efficiency of existing transportation systems. The state-of-the-art ADS follows the human-in-the-loop (HITL) design, where the driver's anomalous behaviour is closely monitored by the system. Though many approaches have been proposed for detecting driver fatigue, they largely depend on vehicle driving parameters and facial features, which lacks reliability. Approaches using physiological based sensors (e.g., electroencephalogram or electrocardiogram) are either too clumsy to wear or impractical to install. In this paper, we propose a novel driver fatigue detection method by embedding surface electromyography (sEMG) sensors on a steering wheel. Compared with the existing methods, our approach is able to collect bio-signals in a non-intrusive way and detect driver fatigue at an earlier stage. The experimental results show that our approach outperforms existing methods with the weighted average F1 scores about 90%. We also propose promising future directions to deploy this approach in real-life settings, such as applying multimodal learning using several supplementary sensors.

eess.SP↗

arXiv2020

An ensemble learning approach for software semantic clone detection

Code clone is a serious problem in software and has the potential to software defects, maintenance overhead, and licensing violations. Therefore, clone detection is important for reducing maintenance effort and improving code quality during software evolution. A variety of clone detection techniques have been proposed to identify similar code in software. However, few of them can efficiently detect semantic clones (functionally similar code without any syntactic resemblance). Recently, several deep learning based clone detectors are proposed to detect semantic clones. However, these approaches have high cost in data labelling and model training. In this paper, we propose a novel approach that leverages word embedding and ensemble learning techniques to detect semantic clones. Our evaluation on a commonly used clone benchmark, BigCloneBench, shows that our approach significantly improves the precision and recall of semantic clone detection, in comparison to a token-based clone detector, SourcererCC, and another deep learning based clone detector, CDLH.

cs.SE↗

arXiv2020

Directivity modulation of exciton emission using single dielectric nanospheres

Coupling emitters with nanoresonators is an effective strategy to control light emission at the subwavelength scale with high efficiency. Low-loss dielectric nanoantennas hold particular promise for this purpose, owing to their strong Mie resonances. Herein, we explore a highly miniaturized platform for the control of emission based on individual subwavelength Si nanospheres (SiNSs) to modulate the directional excitation and exciton emission of two-dimensional transition metal dichalcogenides (2D TMDs). A modified Mie theory for dipole-sphere hybrid systems is derived to instruct the optimal design for desirable modulation performance. Controllable forward-to-backward intensity ratios are experimentally validated in 532 nm laser excitation and 635 nm exciton emission from a monolayer WS2. Versatile light emission control along all device orientations is achieved for different emitters and excitation wavelengths, benefiting from the facile size control and isotropic shape of SiNSs. Simultaneous modulation of excitation and emission via a single SiNS at visible wavelengths significantly improves the efficiency and directivity of TMD exciton emission and leads to the potential of multifunctional integrated photonics. Overall, our work opens promising opportunities for nanophotonics and polaritonic systems, enabling efficient manipulation, enhancement and reconfigurability of light-matter interactions.

physics.optics↗

arXiv2020

Scalable NAS with Factorizable Architectural Parameters

Neural Architecture Search (NAS) is an emerging topic in machine learning and computer vision. The fundamental ideology of NAS is using an automatic mechanism to replace manual designs for exploring powerful network architectures. One of the key factors of NAS is to scale-up the search space, e.g., increasing the number of operators, so that more possibilities are covered, but existing search algorithms often get lost in a large number of operators. For avoiding huge computing and competition among similar operators in the same pool, this paper presents a scalable algorithm by factorizing a large set of candidate operators into smaller subspaces. As a practical example, this allows us to search for effective activation functions along with the regular operators including convolution, pooling, skip-connect, etc. With a small increase in search costs and no extra costs in re-training, we find interesting architectures that were not explored before, and achieve state-of-the-art performance on CIFAR10 and ImageNet, two standard image classification benchmarks.

cs.LG↗

arXiv2020

Vibronic response of a spin-1/2 state from a carbon impurity in two-dimensional WS$_2$

We demonstrate the creation of a spin-1/2 state via the atomically controlled generation of magnetic carbon radical ions (CRIs) in synthetic two-dimensional transition metal dichalcogenides (TMDs). Hydrogenated carbon impurities located at chalcogen sites introduced by chemical doping can be activated with atomic precision by hydrogen depassivation using a scanning probe tip. In its anionic state, the carbon impurity exhibits a magnetic moment of 1 $μ_\text{B}$ resulting from an unpaired electron populating a spin-polarized in-gap orbital of C$^{\bullet -}_\text{S}$. Fermi level control by the underlying graphene substrate can charge and decharge the defect, thereby activating or quenching the defect magnetic moment. By inelastic tunneling spectroscopy and density functional theory calculations we show that the CRI defect states couple to a small number of vibrational modes, including a local, breathing-type mode. Interestingly, the electron-phonon coupling strength critically depends on the spin state and differs for monolayer and bilayer WS$_2$. These carbon radical ions in TMDs comprise a new class of surface-bound, single-atom spin-qubits that can be selectively introduced, are spatially precise, feature a well-understood vibronic spectrum, and are charge state controlled.

cond-mat.mtrl-sci↗

arXiv2020

ICS-Assist: Intelligent Customer Inquiry Resolution Recommendation in Online Customer Service for Large E-Commerce Businesses

Efficient and appropriate online customer service is essential to large e-commerce businesses. Existing solution recommendation methods for online customer service are unable to determine the best solutions at runtime, leading to poor satisfaction of end customers. This paper proposes a novel intelligent framework, called ICS-Assist, to recommend suitable customer service solutions for service staff at runtime. Specifically, we develop a generalizable two-stage machine learning model to identify customer service scenarios and determine customer service solutions based on a scenario-solution mapping table. We implement ICS-Assist and evaluate it using an over 6-month field study with Alibaba Group. In our experiment, over 12,000 customer service staff use ICS-Assist to serve for over 230,000 cases per day on average. The experimen-tal results show that ICS-Assist significantly outperforms the traditional manual method, and improves the solution acceptance rate, the solution coverage rate, the average service time, the customer satisfaction rate, and the business domain catering rate by up to 16%, 25%, 6%, 14% and 17% respectively, compared to the state-of-the-art methods.

cs.IR↗

arXiv2020

Impact of 150keV and 590keV proton irradiation on monolayer MoS2

We present a comprehensive study on the effects of proton irradiation at different energies (150 and 590 keV) with the fluence of 1x 1012 proton/cm2 on monolayer MoS2. This study not only improves our understanding of the influence of high-energy proton beams on MoS2 but also has implications for radiation-induced changes in device processing and engineering of devices from multilayer MoS2 starting material. Increasing defect density with decreasing proton irradiation energy was observed from photoluminescence spectroscopy study. These defects are attributed to sulfur vacancies observed through x-ray photoelectron spectroscopy analysis and confirmed by transmission electron microscope imaging. Scanning electron microscopy images showed the creation of grain boundaries after proton irradiation. A higher degree of surface deformation was detected with lower irradiation energies through atomic force microscopy. Inter-defect distance is increased with the increase in proton energy irradiation as estimated by transmission electron microscopy imaging. Raman spectroscopy reveals negligible structural changes in the crystal quality after the irradiation. These deformation damages due to proton irradiation are insignificant at the MoS2 layer. Based on the overall influence of low energy proton irradiation on the material characteristics, ML-MoS2 materials can be considered robust and reliable building blocks for 2D material based devices for space applications.

physics.app-ph↗

arXiv2020

Wafer-scale epitaxial growth of single orientation WS2 monolayers on sapphire

Realization of wafer-scale single-crystal films of transition metal dichalcogenides (TMDs) such as tungsten sulfide requires epitaxial growth and coalescence of oriented domains to form a continuous monolayer. The domains must be oriented in the same crystallographic direction on the substrate to avoid the formation of metallic inversion domain boundaries (IDBs) which are a common feature of layered chalcogenides. Here we demonstrate fully-coalesced single orientation tungsten sulfide monolayers on 2-inch diameter c-plane sapphire by metalorganic chemical vapor deposition using a multi-step growth process. High growth temperatures and sulfur/metal ratios were required to reduce domain misorientation and achieve epitaxial tungsten sulfide monolayers with low in-plane rotational twist (0.09 deg). Transmission electron microscopy analysis reveals that the tungsten sulfide monolayers lack IDBs but instead have translational boundaries that arise when tungsten sulfide domains with slightly off-set lattices merge together. By adjusting the monolayer growth rate, the density of translational boundaries and bilayer coverage were significantly reduced. The preferred orientation of domains is attributed to the presence of steps on the sapphire surface coupled with growth conditions promote surface diffusion and oriented attachment. The transferred tungsten sulfide monolayers show neutral and charged exciton emission at 80K with negligible defect-related luminescence. Back-gated tungsten sulfide field effect transistors exhibited mobility of 16 cm2/Vs. The results demonstrate the potential of achieving wafer-scale TMD monolayers free of inversion domains with properties approaching that of exfoliated flakes.

cond-mat.mtrl-sci↗