arXiv subjects

Tiedo Tinga

Publications and source records attributed to Tiedo Tinga.

8 recordsLinked to original sources

arXiv2026

Physics-Informed Framework for Impact Identification in Aerospace Composites

This paper introduces a novel physics-informed impact identification (Phy-ID) framework. The proposed method integrates observational, inductive, and learning biases to combine physical knowledge with data-driven inference in a unified modelling strategy, achieving physically consistent and numerically stable impact identification. The physics-informed approach structures the input space using physics-based energy indicators, constrains admissible solutions via architectural design, and enforces governing relations via hybrid loss formulations. Together, these mechanisms limit non-physical solutions and stabilise inference under degraded measurement conditions. A disjoint inference formulation is used as a representative use case to demonstrate the framework capabilities, in which impact velocity and impactor mass are inferred through decoupled surrogate models, and impact energy is computed by enforcing kinetic energy consistency. Experimental evaluations show mean absolute percentage errors below 8% for inferred impact velocity and impactor mass and below 10% for impact energy. Additional analyses confirm stable performance under reduced data availability and increased measurement noise, as well as generalisation for out-of-distribution cases across pristine and damaged regimes when damaged responses are included in training. These results indicate that the systematic integration of physics-informed biases enables reliable, physically consistent, and data-efficient impact identification, highlighting the potential of the approach for practical monitoring systems.

cs.LG↗

arXiv2025

Defining Energy Indicators for Impact Identification on Aerospace Composites: A Structured Feature Selection Approach Guided by Domain Knowledge

Energy estimation is critical to impact identification on aerospace composites, where low-velocity impacts can induce internal damage that is undetectable at the surface. Data sparsity, signal noise, complex feature interdependencies, non-linear dynamics, massive design spaces, and the ill-posed nature of the inverse problem often constrain current methodologies for energy prediction. Machine learning enriched with prior knowledge is a promising direction for overcoming these constraints. Prior knowledge can be incorporated by acting on the input space, where the choice of data representation directly influences how effectively the model relates measured signals to impact energy. Despite its importance, the selection of effective features lacks a systematic procedure, with no consensus on how to choose among the many candidate descriptors available. The present study addresses that gap through a structured workflow that designs the input space using domain knowledge. Features are extracted from the time, frequency, and time-frequency domains, then filtered for statistical significance, correlation, dimensionality reduction, and robustness to noise. Exploratory data analysis further relates the retained descriptors to the dynamics. The resulting indicators form the input space for a fully connected neural network, which is trained and validated on experimental data from multiple impact scenarios, including pristine and damaged states. The model reduces the prediction error by a factor of three relative to conventional time-series techniques and purely data-driven baselines, while every retained or discarded descriptor remains traceable to the aspect it describes. Overall, the framework advances predictive performance, interpretability, and diagnostic confidence by embedding domain knowledge through targeted feature selection.

cs.LG↗

arXiv2025

Demonstrators for Industrial Cyber-Physical System Research: A Requirements Hierarchy Driven by Software-Intensive Design

One of the challenges apparent in the organisation of research projects is the uncertainties around the subject of demonstrators. A precise and detailed elicitation of the coverage for project demonstrators is often an afterthought and not sufficiently detailed during proposal writing. This practice leads to continuous confusion and a mismatch between targeted and achievable demonstration of results, hindering progress. The reliance on the TRL scale as a loose descriptor does not help either. We propose a demonstrator requirements elaboration framework aiming to evaluate the feasibility of targeted demonstrations, making realistic adjustments, and assist in describing requirements. In doing so, we define 5 hierarchical levels of demonstration, clearly connected to expectations, e.g., work package interaction, and also connected to the project's industrial use-cases. The considered application scope in this paper is the domain of software-intensive systems and industrial cyber-physical systems. A complete validation is not accessible, as it would require application of our framework at the start of a project and observing the results at the end, taking 4-5 years. Nonetheless, we have applied it to two research projects from our portfolio, one at the early and another at the final stages, revealing its effectiveness.

cs.SE↗

arXiv2025

InfoPos: A Design Support Framework for ML-Assisted Fault Detection and Identification in Industrial Cyber-Physical Systems

The variety of building blocks and algorithms incorporated in data-centric and ML-assisted fault detection and identification solutions is high, contributing to two challenges: selection of the most effective set and order of building blocks, as well as achieving such a selection with minimum cost. Considering that ML-assisted solution design is influenced by the extent of available data and the extent of available knowledge of the target system, it is advantageous to be able to select effective and matching building blocks. We introduce the first iteration of our InfoPos framework, allowing the placement of fault detection/identification use-cases based on the available levels (positions), i.e., from poor to rich, of knowledge and data dimensions. With that input, designers and developers can reveal the most effective corresponding choice(s), streamlining the solution design process. The results from a demonstrator, a fault identification use-case for industrial Cyber-Physical Systems, reflects achieved effects when different building blocks are used throughout knowledge and data positions. The achieved ML model performance is considered as the indicator for a better solution. The data processing code and composed datasets are publicly available.

cs.LG↗

arXiv2024

A maturity framework for data driven maintenance

Maintenance decisions range from the simple detection of faults to ultimately predicting future failures and solving the problem. These traditionally human decisions are nowadays increasingly supported by data and the ultimate aim is to make them autonomous. This paper explores the challenges encountered in data driven maintenance, and proposes to consider four aspects in a maturity framework: data / decision maturity, the translation from the real world to data, the computability of decisions (using models) and the causality in the obtained relations. After a discussion of the theoretical concepts involved, the exploration continues by considering a practical fault detection and identification problem. Two approaches, i.e. experience based and model based, are compared and discussed in terms of the four aspects in the maturity framework. It is observed that both approaches yield the same decisions, but still differ in the assignment of causality. This confirms that a maturity assessment not only concerns the type of decision, but should also include the other proposed aspects.

cs.AI↗

arXiv2024

Comparing Homogeneous And Inhomogeneous Time Markov Chains For Modelling Degradation In Sewer Pipe Networks

Sewer pipe systems are essential for social and economic welfare. Managing these systems requires robust predictive models for degradation behaviour. This study focuses on probability-based approaches, particularly Markov chains, for their ability to associate random variables with degradation. Literature predominantly uses homogeneous and inhomogeneous Markov chains for this purpose. However, their effectiveness in sewer pipe degradation modelling is still debatable. Some studies support homogeneous Markov chains, while others challenge their utility. We examine this issue using a large-scale sewer network in the Netherlands, incorporating historical inspection data. We model degradation with homogeneous discrete and continuous time Markov chains, and inhomogeneous-time Markov chains using Gompertz, Weibull, Log-Logistic and Log-Normal density functions. Our analysis suggests that, despite their higher computational requirements, inhomogeneous-time Markov chains are more appropriate for modelling the nonlinear stochastic characteristics related to sewer pipe degradation, particularly the Gompertz distribution. However, they pose a risk of over-fitting, necessitating significant improvements in parameter inference processes to effectively address this issue.

stat.ME↗

arXiv2024

Maintenance Strategies for Sewer Pipes with Multi-State Degradation and Deep Reinforcement Learning

Large-scale infrastructure systems are crucial for societal welfare, and their effective management requires strategic forecasting and intervention methods that account for various complexities. Our study addresses two challenges within the Prognostics and Health Management (PHM) framework applied to sewer assets: modeling pipe degradation across severity levels and developing effective maintenance policies. We employ Multi-State Degradation Models (MSDM) to represent the stochastic degradation process in sewer pipes and use Deep Reinforcement Learning (DRL) to devise maintenance strategies. A case study of a Dutch sewer network exemplifies our methodology. Our findings demonstrate the model's effectiveness in generating intelligent, cost-saving maintenance strategies that surpass heuristics. It adapts its management strategy based on the pipe's age, opting for a passive approach for newer pipes and transitioning to active strategies for older ones to prevent failures and reduce costs. This research highlights DRL's potential in optimizing maintenance policies. Future research will aim improve the model by incorporating partial observability, exploring various reinforcement learning algorithms, and extending this methodology to comprehensive infrastructure management.

cs.LG↗

arXiv2022

Automatic inference of fault tree models via multi-objective evolutionary algorithms

Fault tree analysis is a well-known technique in reliability engineering and risk assessment, which supports decision-making processes and the management of complex systems. Traditionally, fault tree (FT) models are built manually together with domain experts, considered a time-consuming process prone to human errors. With Industry 4.0, there is an increasing availability of inspection and monitoring data, making techniques that enable knowledge extraction from large data sets relevant. Thus, our goal with this work is to propose a data-driven approach to infer efficient FT structures that achieve a complete representation of the failure mechanisms contained in the failure data set without human intervention. Our algorithm, the FT-MOEA, based on multi-objective evolutionary algorithms, enables the simultaneous optimization of different relevant metrics such as the FT size, the error computed based on the failure data set and the Minimal Cut Sets. Our results show that, for six case studies from the literature, our approach successfully achieved automatic, efficient, and consistent inference of the associated FT models. We also present the results of a parametric analysis that tests our algorithm for different relevant conditions that influence its performance, as well as an overview of the data-driven methods used to automatically infer FT models.

cs.NE↗