arXiv subjects

Tierui Gong

Publications and source records attributed to Tierui Gong.

At least 19 recordsLinked to original sources

arXiv2026

Signal-Dependent Shot Noise Modeling of Rydberg Atomic Quantum Receivers: A Design Perspective

In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.

eess.SP↗

arXiv2026

Rydberg Atomic Quantum Receivers for Wireless Communications: Two-Color vs. Three-Color Excitation

An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.

cs.IT↗

arXiv2025

Enhanced Ground-Satellite Direct Access via Onboard Rydberg Atomic Quantum Receivers

Ground-satellite links for 6G networks face critical challenges, including severe path loss, tight size-weight-power limits, and congested spectrum, all of which significantly hinder the performance of traditional radio frequency (RF) front ends. This article introduces the Rydberg Atomic Quantum Receiver (RAQR) for onboard satellite systems, a millimeter-scale front end that converts radio fields to optical signals through atomic electromagnetically induced transparency. RAQR's high sensitivity and high frequency selectivity address link budget, payload, and interference challenges while fitting within space constraints. A hybrid atomic-electronic design and supporting signal model demonstrate enhanced data rate, coverage, and sensing accuracy relative to conventional RF receivers. The article concludes with integration strategies, distributed-satellite concepts, and open research problems for bringing RAQR-enabled satellite payloads into service.

eess.SY↗

arXiv2025

Rydberg Atomic Quantum Satellites for Enhanced Ground-to-Space Direct Uplink Access

This paper investigates the performance advantages of Rydberg atomic quantum (RAQ)-based multiple-input multiple-output (MIMO) satellites for enhancing direct ground-to-space uplink access.We analytically evaluate the impact of Rydberg atoms on channel estimation by deriving closed-form expressions for the mean-square error (MSE) and normalized mean-square error (NMSE). Based on the estimated channels, we further derive lower bounds on the achievable data rates for maximum ratio combining (MRC) and zero-forcing (ZF) detection schemes. Rigorous analysis demonstrates that RAQ-MIMO outperforms conventional radio-frequency (RF) MIMO under both Rayleigh and satellite channel conditions. Specifically, compared with conventional MIMO, RAQR achieves a ``squaring" gain under Rayleigh fading, especially in long-distance transmission scenarios with stringent power constraints. In contrast, under line-of-sight (LoS)-dominated satellite channels, this gain saturates as channel-estimation benefits diminish, with the remaining improvement primarily arising from the normalized noise background. Monte Carlo simulations validate the analytical results and show that the performance gains of RAQ-MIMO satellites translate into smaller antenna apertures, lower transmit power, and longer communication ranges, thereby paving the way for next-generation satellite networks.

eess.SP↗

arXiv2025

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 14.7 MHz, which is 21-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.5-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 9-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is 1000-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗

arXiv2025

Cooperative UAV-mounted RISs-assisted Energy-efficient Communications

Cooperative reconfigurable intelligent surfaces (RISs) are promising technologies for 6G networks to support a great number of users. Compared with the fixed RISs, the properly deployed RISs may improve the communication performance with less communication energy consumption, thereby improving the energy efficiency. In this paper, we consider a cooperative unmanned aerial vehicle-mounted RISs (UAV-RISs)-assisted cellular network, where multiple RISs are carried and enhanced by UAVs to serve multiple ground users (GUs) simultaneously such that achieving the three-dimensional (3D) mobility and opportunistic deployment. Specifically, we formulate an energy-efficient communication problem based on multi-objective optimization framework (EEComm-MOF) to jointly consider the beamforming vector of base station (BS), the location deployment and the discrete phase shifts of UAV-RIS system so as to simultaneously maximize the minimum available rate over all GUs, maximize the total available rate of all GUs, and minimize the total energy consumption of the system, while the transmit power constraint of BS is considered. To comprehensively solve EEComm-MOF which is an NP-hard and non-convex problem with constraints, a non-dominated sorting genetic algorithm-II with a continuous solution processing mechanism, a discrete solution processing mechanism, and a complex solution processing mechanism (INSGA-II-CDC) is proposed. Simulations results demonstrate that the proposed INSGA-II-CDC can solve EEComm-MOF effectively and outperforms other benchmarks under different parameter settings. Moreover, the stability of INSGA-II-CDC and the effectiveness of the improved mechanisms are verified. Finally, the implementability analysis of the algorithm is given.

eess.SP↗

arXiv2025

Rydberg Atomic Receivers for Wireless Communications: Fundamentals, Potential, Applications, and Challenges

Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.

eess.SP↗

arXiv2025

Rydberg Atomic Quantum MIMO Receivers for The Multi-User Uplink

Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution for evolving wireless receivers from the classical to the quantum domain. To further unleash their great potential in wireless communications, we propose a flexible architecture for Rydberg atomic quantum multiple-input multiple-output (RAQ-MIMO) receivers in the multi-user uplink. Then the corresponding signal model of the RAQ-MIMO system is constructed by paving the way from quantum physics to classical wireless communications. Explicitly, we outline the associated operating principles and transmission flow. We also validate the linearity of our model and its feasible region. Based on our model, we derive closed-form asymptotic formulas for the ergodic achievable rate (EAR) of both the maximum-ratio combining (MRC) and zero-forcing (ZF) receivers operating in uncorrelated fading channels (UFC) and the correlated fading channels (CFC), as well as in the standard quantum limit (SQL) and photon shot limit (PSL) regimes, respectively. Furthermore, we unveil that the EAR scales logarithmically without bound with the product of effective number $N_{\text{atom}}$ and coherence time $T_2$ of the atomic ensemble in the SQL regime, but exhibits non-monotonic trade-off between the collective atomic enhancement and optical-depth-dependent attenuation in the PSL regime. More particularly, the transmit power of users can be scaled down quadratically with $N_{\text{atom}} \tau$, $\tau \in \{ T_2, \frac{ {\cal C} (\Omega_{\ell}) }{A_p} \}$, but the EAR per user retains fixed, by increasing $N_{\text{atom}}$ while retaining the sensor number $M \propto N_{\text{atom}} \tau$ in the SQL regime or $M \propto \exp \big( \frac{N_{\text{atom}} {\bar \chi}}{A_p} \big)$ in the PSL regime....

eess.SP↗

arXiv2025

Robust Deep Learning-Based Physical Layer Communications: Strategies and Approaches

Deep learning (DL) has emerged as a transformative technology with immense potential to reshape the sixth-generation (6G) wireless communication network. By utilizing advanced algorithms for feature extraction and pattern recognition, DL provides unprecedented capabilities in optimizing the network efficiency and performance, particularly in physical layer communications. Although DL technologies present the great potential, they also face significant challenges related to the robustness, which are expected to intensify in the complex and demanding 6G environment. Specifically, current DL models typically exhibit substantial performance degradation in dynamic environments with time-varying channels, interference of noise and different scenarios, which affect their effectiveness in diverse real-world applications. This paper provides a comprehensive overview of strategies and approaches for robust DL-based methods in physical layer communications. First we introduce the key challenges that current DL models face. Then we delve into a detailed examination of DL approaches specifically tailored to enhance robustness in 6G, which are classified into data-driven and model-driven strategies. Finally, we verify the effectiveness of these methods by case studies and outline future research directions.

cs.IT↗

arXiv2025

Rydberg Atomic Quantum Receivers for the Multi-User MIMO Uplink

Rydberg atomic quantum receivers exhibit great potential in assisting classical wireless communications due to their outstanding advantages in detecting radio frequency signals. To realize this potential, we integrate a Rydberg atomic quantum receiver into a classical multi-user multiple-input multiple-output (MIMO) scheme to form a multi-user Rydberg atomic quantum MIMO (RAQ-MIMO) system for the uplink. To study this system, we first construct an equivalent baseband signal model, which facilitates convenient system design, signal processing and optimizations. We then study the ergodic achievable rates under both the maximum ratio combining (MRC) and zero-forcing (ZF) schemes by deriving their tight lower bounds. We next compare the ergodic achievable rates of the RAQ-MIMO and the conventional massive MIMO schemes by offering a closed-form expression for the difference of their ergodic achievable rates, which allows us to directly compare the two systems. Our results show that RAQ-MIMO allows the average transmit power of users to be $> 25$ dBm lower than that of the conventional massive MIMO. Viewed from a different perspective, an extra $\sim 8.8$ bits/s/Hz/user rate becomes achievable by ZF RAQ-MIMO.

eess.SP↗

arXiv2025

Rydberg Atomic Quantum Receivers for Multi-Target DOA Estimation

Quantum sensing technologies have experienced rapid progresses since entering the `second quantum revolution'. Among various candidates, schemes relying on Rydberg atoms exhibit compelling advantages for detecting radio frequency signals. Based on this, Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution to classical wireless communication and sensing. To harness the advantages and exploit the potential of RAQRs in wireless sensing, we investigate the realization of the direction of arrival (DOA) estimation by RAQRs. Specifically, we first conceive a Rydberg atomic quantum uniform linear array (RAQ-ULA) aided wireless receiver for multi-target DOA detection and propose the corresponding signal model of this sensing system. Our model reveals that the presence of the radio-frequency local oscillator in the RAQ-ULA creates sensor gain mismatches, which degrade the DOA estimation significantly by employing the classical Estimation of Signal Parameters via Rotational Invariant Techniques (ESPRIT). To solve this sensor gain mismatch problem, we propose the Rydberg atomic quantum ESPRIT (RAQ-ESPRIT) relying on our model. Lastly, we characterize our scheme through numerical simulations, where the results exhibit that it is capable of reducing the estimation error of its classical counterpart on the order of $> 400$-fold and $> 9000$-fold in the PSL and SQL, respectively.

eess.SP↗

arXiv2024

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over $27$ decibel (dB) and $40$ dB in the photon shot limit and standard quantum limit regimes, respectively.

eess.SP↗

arXiv2024

Rydberg Atomic Quantum Receivers for Classical Wireless Communication and Sensing

The Rydberg atomic quantum receivers (RAQR) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on light-atom interactions relying on the so called electromagnetically induced transparency (EIT) and Aulter-Townes splitting (ATS), so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states and various modulation schemes facilitate an ultra-high sensitivity ($\sim$ nV/cm/$\sqrt{\text{Hz}}$) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple-output (RAQ-MIMO) schemes for facilitating the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.

eess.SP↗

arXiv2024

Electromagnetic Information Theory for Holographic MIMO Communications

Holographic multiple-input multiple-output (HMIMO) utilizes a compact antenna array to form a nearly continuous aperture, thereby enhancing higher capacity and more flexible configurations compared with conventional MIMO systems, making it attractive in current scientific research. Key questions naturally arise regarding the potential of HMIMO to surpass Shannon's theoretical limits and how far its capabilities can be extended. However, the traditional Shannon information theory falls short in addressing these inquiries because it only focuses on the information itself while neglecting the underlying carrier, electromagnetic (EM) waves, and environmental interactions. To fill up the gap between the theoretical analysis and the practical application for HMIMO systems, we introduce electromagnetic information theory (EIT) in this paper. This paper begins by laying the foundation for HMIMO-oriented EIT, encompassing EM wave equations and communication regions. In the context of HMIMO systems, the resultant physical limitations are presented, involving Chu's limit, Harrington's limit, Hannan's limit, and the evaluation of coupling effects. Field sampling and HMIMO-assisted oversampling are also discussed to guide the optimal HMIMO design within the EIT framework. To comprehensively depict the EM-compliant propagation process, we present the approximate and exact channel modeling approaches in near-/far-field zones. Furthermore, we discuss both traditional Shannon's information theory, employing the probabilistic method, and Kolmogorov information theory, utilizing the functional analysis, for HMIMO-oriented EIT systems.

cs.IT↗

arXiv2024

Near-Field Channel Modeling for Holographic MIMO Communications

Empowered by the latest progress on innovative metamaterials/metasurfaces and advanced antenna technologies, holographic multiple-input multiple-output (H-MIMO) emerges as a promising technology to fulfill the extreme goals of the sixth-generation (6G) wireless networks. The antenna arrays utilized in H-MIMO comprise massive (possibly to extreme extent) numbers of antenna elements, densely spaced less than half-a-wavelength and integrated into a compact space, realizing an almost continuous aperture. Thanks to the expected low cost, size, weight, and power consumption, such apertures are expected to be largely fabricated for near-field communications. In addition, the physical features of H-MIMO enable manipulations directly on the electromagnetic (EM) wave domain and spatial multiplexing. To fully leverage this potential, near-field H-MIMO channel modeling, especially from the EM perspective, is of paramount significance. In this article, we overview near-field H-MIMO channel models elaborating on the various modeling categories and respective features, as well as their challenges and evaluation criteria. We also present EM-domain channel models that address the inherit computational and measurement complexities. Finally, the article is concluded with a set of future research directions on the topic.

eess.SP↗

arXiv2023

A Transmit-Receive Parameter Separable Electromagnetic Channel Model for LoS Holographic MIMO

To support the extremely high spectral efficiency and energy efficiency requirements, and emerging applications of future wireless communications, holographic multiple-input multiple-output (H-MIMO) technology is envisioned as one of the most promising enablers. It can potentially bring extra degrees-of-freedom for communications and signal processing, including spatial multiplexing in line-of-sight (LoS) channels and electromagnetic (EM) field processing performed using specialized devices, to attain the fundamental limits of wireless communications. In this context, EM-domain channel modeling is critical to harvest the benefits offered by H-MIMO. Existing EM-domain channel models are built based on the tensor Green function, which require prior knowledge of the global position and/or the relative distances and directions of the transmit/receive antenna elements. Such knowledge may be difficult to acquire in real-world applications due to extensive measurements needed for obtaining this data. To overcome this limitation, we propose a transmit-receive parameter separable channel model methodology in which the EM-domain (or holographic) channel can be simply acquired from the distance/direction measured between the center-points between the transmit and receive surfaces, and the local positions between the transmit and receive elements, thus avoiding extensive global parameter measurements. Analysis and numerical results showcase the effectiveness of the proposed channel modeling approach in approximating the H-MIMO channel, and achieving the theoretical channel capacity.

eess.SP↗

arXiv2023

Holographic MIMO Communications with Arbitrary Surface Placements: Near-Field LoS Channel Model and Capacity Limit

Envisioned as one of the most promising technologies, holographic multiple-input multiple-output (H-MIMO) recently attracts notable research interests for its great potential in expanding wireless possibilities and achieving fundamental wireless limits. Empowered by the nearly continuous, large and energy-efficient surfaces with powerful electromagnetic (EM) wave control capabilities, H-MIMO opens up the opportunity for signal processing in a more fundamental EM-domain, paving the way for realizing holographic imaging level communications in supporting the extremely high spectral efficiency and energy efficiency in future networks. In this article, we try to implement a generalized EM-domain near-field channel modeling and study its capacity limit of point-to-point H-MIMO systems that equips arbitrarily placed surfaces in a line-of-sight (LoS) environment. Two effective and computational-efficient channel models are established from their integral counterpart, where one is with a sophisticated formula but showcases more accurate, and another is concise with a slight precision sacrifice. Furthermore, we unveil the capacity limit using our channel model, and derive a tight upper bound based upon an elaborately built analytical framework. Our result reveals that the capacity limit grows logarithmically with the product of transmit element area, receive element area, and the combined effects of $1/{{d}_{mn}^2}$, $1/{{d}_{mn}^4}$, and $1/{{d}_{mn}^6}$ over all transmit and receive antenna elements, where $d_{mn}$ indicates the distance between each transmit and receive elements. Numerical evaluations validate the effectiveness of our channel models, and showcase the slight disparity between the upper bound and the exact capacity, which is beneficial for predicting practical system performance.

eess.SP↗

arXiv2023

A Generalized Electromagnetic-Domain Channel Modeling for LOS Holographic MIMO with Arbitrary Surface Placements

Holographic multiple-input multiple-output (H-MIMO) is considered as one of the most promising technologies to enable future wireless communications in supporting the expected extreme requirements, such as high energy and spectral efficiency. Empowered by the powerful capability in electromagnetic (EM) wave manipulations, H-MIMO has the potential to reach the fundamental limit of the wireless environment, and opens up the possibility of signal processing in the EM-domain, which needs to be depicted carefully from an EM perspective, especially the wireless channel. To this aim, we study the line-of-sight (LOS) H-MIMO communications with arbitrary surface placements and establish an exact expression of the wireless channel in the EM-domain. To further obtain a more explicit and computationally-efficient channel models, we solve the implicit integrals of the exact channel model with moderate and reasonable assumptions. Numerical studies are executed and the results show good agreements of our established approximated channel models to the exact channel model.

eess.SP↗