SearcharxivSearch

arXiv subjects

Til Birnstiel

Publications and source records attributed to Til Birnstiel.

At least 19 recordsLinked to original sources

Dust characterization of halos: The extended emission in protoplanetary disks

Extended low surface brightness emission has been identified in a number of protoplanetary disks, in tension with predictions of radial drift theory. We aim to investigate the nature and origin of faint, extended dust emission in the outer regions of protoplanetary disks, which we define as the "Halo", using multiwavelength (sub)millimeter continuum observations of three systems: Elias 2-24, IM Lup, and DM Tau. We utilized Atacama Large Millimeter Array (ALMA) observations of our targets to perform spectral energy distribution (SED) fitting with four dust compositions and derived radial profiles of their dust properties. The halos identified in our sources account for 20 - 30% of the total flux density at (sub)millimeter wavelengths. In Elias 2-24, IM Lup, and DM Tau, we infer maximum grain sizes of 2 cm, $<$ 4 mm, and $<$ 9 mm, with the data best reproduced by porous amorphous carbon, compact amorphous carbon, and compact organic carbon compositions, respectively. Their total dust masses are $125^{+34}_{-23}$, $301^{+139}_{-101}$, and $829^{+761}_{-378}$ M$_{\oplus}$, with corresponding halo masses of $33^{+12}_{-6}$, $103^{+25}_{-17}$, and $316^{+202}_{-117}$ M$_{\oplus}$. The halos of IM Lup and DM Tau are dust rich with gas-to-dust mass ratios of 64 and 18, respectively. In all three disks, the dust drift and growth timescales are shorter than the disk ages, implying that the smooth outer disks should not exist. The halos in our sources hold relevant fractions of the total dust reservoir, demonstrating that they play an important role in alleviating the mass-budget problem. While the persistence of halos in IM Lup and DM Tau could be explained by late infall, the presence of centimeter-sized grains in Elias 2-24's halo suggests that unresolved dust traps also play a role.

astro-ph.EP

TriPoDPy: 1D Tri-Population size distributions forDust evolution in protoplanetary disks

TriPoDPy is a code simulating the dust evolution, including dust growth and dynamics in protoplanetary disks using the parametric dust model presented in (Pfeil et al., 2024). The simulation evolves a dust distribution in a one-dimensional grid in the radial direction. It's written in Python and the core routines are implemented in Fortran90. The code not only solves for the evolution of the dust but also the gas disk with the canonical alpha-description (Shakura & Sunyaev, 1973). In addition to the original model, we added descriptions of tracers for the dust and gas, which could be used for compositional tracking of additional components.

astro-ph.IM

Formation of Multiple Dynamical Classes in the Kuiper Belt via Disk Dissipation

Planetesimal formation likely lasted for millions of years in the solar nebula, and the cold classicals in the Kuiper Belt are suggested to be the direct products of streaming instability. The presence of minor planetary bodies in the outer solar system and the exo-Kuiper belts provide key constraints to planet formation models. In this work, we connected dust drift and coagulation, planetesimal formation, N-body gravity, pebble accretion, planet migration, planetary core accretion, gap opening, and internal photoevaporation in one modeling framework. We demonstrate that multiple classes of minor planets, or planetesimals, can form during disk dissipation and remain afterwards, including a scattered group, a resonant group, and a dynamically cold group. Significant growth by pebble accretion was prevented by both dynamical heating due to the giant planet in the system and rapid dispersal of the disk toward the end of its lifetime. We also conducted a parameter study which showed that this is not a universal case, where the outcome is determined by the competition for dust between planetesimal formation and pebble accretion. Combining this scenario with sequential planet formation, this model provides a promising pathway toward an outer solar system formation model.

astro-ph.EP

General Implicit Runge-Kutta Integrators for Multifluid Gas-Dust Aerodynamic Drag

The integration of aerodynamic drag is a fundamental step in simulating dust dynamics in hydrodynamical simulations. We propose a novel integration scheme, designed to be compatible with Strang splitting techniques, which allows for the straightforward integration of external forces and hydrodynamic fluxes in general-purpose hydrodynamic simulation codes. Moreover, this solver leverages an analytical solution to the problem of drag acceleration, ensuring linear complexity even in cases with multiple dust grain sizes, as opposed to the cubic scaling of methods that require a matrix inversion step. This new General Implicit Runge-Kutta integrator (GIRK) is evaluated using standard benchmarks for dust dynamics such as DUSTYBOX, DUSTYWAVE, and DUSTYSHOCK. The results demonstrate not only the accuracy of the method but also the expected scalings in terms of accuracy, convergence to equilibrium, and execution time. GIRK can be easily implemented in hydrodynamical simulations alongside hydrodynamical steps and external forces, and is especially useful in simulations with a large number of dust grain sizes.

astro-ph.IM

Modeling dust dynamics in OpenGadget3 -- I. SPH implementation of the One-Fluid model

Dust dynamics plays a critical role in astrophysical processes and has been modeled in hydrodynamical simulations using various approaches. Among particle-based methods like Smoothed Particle Hydrodynamics (SPH), the One-Fluid model has proven to be highly effective for simulating gas-dust mixtures. This study presents the implementation of the One-Fluid model in OpenGadget3, introducing improvements to the original formulation. These enhancements include time-dependent artificial viscosity and conductivity, as well as a novel treatment of dust diffusion using a pressure-like term. The improved model is tested using a suite of dust dynamics benchmark problems: DUSTYBOX, DUSTYWAVE, and DUSTYSHOCK, with the latter extended to multidimensional scenarios, as well as a dusty Sedov-Taylor blast wave. Additional tests include simulations of Cold Keplerian Disks, dusty protoplanetary disks, and Kelvin-Helmholtz instabilities to evaluate the model's robustness in more complex flows. The implementation successfully passes all standard benchmark tests. It demonstrates stability and accuracy in both simple and complex simulations. The new diffusion term improves the handling of flows with large dust-to-gas ratios and low drag coefficients, although limitations of the One-Fluid model in these regimes remain. The enhanced One-Fluid model is a reliable and robust tool for simulating dust dynamics in OpenGadget3. While it retains some limitations inherent to the original formulation, the introduced improvements expand its applicability and address some challenges in gas-dust dynamics.

astro-ph.IM

Turbulence Inhibits Planetesimal Formation in Class 0/I Disks Subject to Infall

There is growing evidence that planet formation begins early, within the $\lesssim 1$Myr Class 0/I phase, when infall dominates disk dynamics. Our goal is to determine if Class 0/I disks reach the conditions needed to form planetesimals ($\sim 100$km planet building blocks) by the streaming instability (SI). We focus on a recent suggestion that early infall causes an ``inflationary'' phase in which dust grains are advected outward. We modified the \texttt{DustPy} code to build a 1D disk that includes dust evolution, infall, and heating and cooling sources. We ran six models and examined the implications for the SI, taking into account recent works on how the SI responds to external turbulence. In line with other works, we find that grains are advected outward, which leads to ``advection-condensation-drift'' loop that greatly enhances the dust density at the water snowline. However, we do not see this process at the silicate line. Instead, we find a new pile up at the edge of the expanding disk. However, despite these localized enhancements, even a modest amount of turbulence ($α= 10^{-3}$) leaves planetesimal formation far out of reach. The midplane dust-to-gas ratio is at least an order of magnitude below the SI threshold, even taking into account recent results on how dust coagulation boosts the SI. For planetesimals to form in the Class 0/I phase may require a way to transport angular momentum without turbulence (e.g., disk winds) or a non-SI mechanism to form planetesimals.

astro-ph.EP

Refractory carbon depletion by photolysis through dust collisions and vertical mixing

The inner Solar System is depleted in refractory carbon in comparison to the interstellar medium and the depletion likely took place in the protoplanetary disk phase of the Solar System. We study the effect of photolysis of refractory carbon in the upper layers of the protosolar disk and its interplay with dust collisional growth and vertical mixing. We make use of a 1D Monte Carlo model to simulate dust coagulation and vertical mixing. To model the FUV flux of the disk, we use a simple analytical prescription and benchmark it with data from a radiative transfer simulation. We study the effects of fragmentation and bouncing on dust distribution and the propagation of carbon depletion. We find that when bouncing is included, the size distribution is truncated at smaller sizes than fragmentation-limited size distributions but there is a loss of small grains as well. The population of small grains is reduced due to fewer fragmentation events and this reduces the effectiveness of photolysis. We find that dust collisional growth and vertical mixing increase the effectiveness of carbon depletion by efficiently replenishing carbon to the upper regions of the disk with higher FUV flux. It takes around 100-300 kyr to reach the measured carbon abundances at 1 au, depending on the strength of the turbulence in the disk. These timescales are faster than reported by previous studies. Collisional redistribution and turbulent mixing are important aspects of dust evolution that should be included when modeling dust chemistry as they can influence the efficiency of chemical processes. Photolysis, along with another process such as sublimation, most likely played a key role in refractory carbon depletion that we see around us in the inner Solar System.

astro-ph.EP

TriPoD: Tri-Population size distributions for Dust evolution. Coagulation in vertically integrated hydrodynamic simulations of protoplanetary disks

Context. Dust coagulation and fragmentation impact the structure and evolution of protoplanetary disks and set the initial conditions for planet formation. Dust grains dominate the opacities, they determine the cooling times of the gas, they influence the ionization state of the gas, and the grain surface area is an important parameter for the chemistry in protoplanetary disks. Therefore, dust evolution should not be ignored in numerical studies of protoplanetary disks. Available dust coagulation models are, however, too computationally expensive to be implemented in large-scale hydrodynamic simulations. This limits detailed numerical studies of protoplanetary disks, including these effects, mostly to one-dimensional models. Aims. We aim to develop a simple - yet accurate - dust coagulation model that can be implemented in hydrodynamic simulations of protoplanetary disks. Our model shall not significantly increase the computational cost of simulations and provide information about the local grain size distribution. Methods. The local dust size distributions are assumed to be truncated power laws. Such distributions can be characterized by two dust fluids (large and small grains) and a maximum particle size, truncating the power law. We compare our model to state-of-the-art dust coagulation simulations and calibrate it to achieve a good fit with these sophisticated numerical methods. Results. Running various parameter studies, we achieved a good fit between our simplified three-parameter model and DustPy, a state-of-the-art dust coagulation software. Conclusions. We present TriPoD, a sub-grid dust coagulation model for the PLUTO code. With TriPoD, we can perform two-dimensional, vertically integrated dust coagulation simulations on top of a hydrodynamic simulation. Studying the dust distributions in two-dimensional vortices and planet-disk systems is thus made possible.

astro-ph.EP

VLT/MUSE detection of accretion-ejection associated with the close stellar companion in the HT Lup system

The accretion/ejection processes in T-Tauri stars are fundamental to their physical evolution, while also impacting the properties and evolution of the circumstellar material at a time when planet formation takes place. To this date, characterization of ongoing accretion processes in stellar pairs at 5-50\,au scales has been challenging, high angular resolution spectrographs are required to extract the spectral features of each component. We present the analysis of spectroscopic observations of the tight (160mas, 25au) T-Tauri system HT Lup A/B, obtained with MUSE at VLT in March and July of 2021. We focus on constraining the accretion/ejection processes and variability of the secondary component HT Lup B, by searching for accretion tracers applying High-Resolution Spectral Differential Imaging techniques. We retrieve strong (SNR $>$ 5) $Hα, Hβ$ and [OI]$\lambda6300$ emission in both epochs. The $Hα$ and $Hβ$ line fluxes showcase high variability, with variations up to 400-500\% between epochs. The fluxes are consistent with accretion rates of $8\times10^{-9} M_\odot \, yr^{-1}$ and $2\times10^{-9} M_\odot \, yr^{-1}$ for the first and second epoch, respectively. We attribute the increased accretion activity during the first night to a "burst" like event, followed by a relaxation period more representative of the common accretion activity of the system. The [OI]$\lambda6300$ line profiles remain relatively similar between epochs and suggest ejection rates on the order of $10^{-9}-10^{-10} M_\odot \, yr^{-1}$, compatible with moderate disk winds emission. Our results also indicate that the accretion processes of HT Lup B are compatible with Classical T Tauri Stars, unlike previous classifications

astro-ph.SR

Sequential giant planet formation initiated by disc substructure

Planet formation models are necessary to understand the origins of diverse planetary systems. Circumstellar disc substructures have been proposed as preferred locations of planet formation but a complete formation scenario has not been covered by a single model so far. We aim to study the formation of giant planets facilitated by disc substructure and starting with sub-micron-sized dust. We connect dust coagulation and drift, planetesimal formation, $N$-body gravity, pebble accretion, planet migration, planetary gas accretion and gap opening in one consistent modelling framework. We find rapid formation of multiple gas giants from the initial disc substructure. The migration trap near the substructure allows the formation of cold gas giants. A new pressure maximum is created at the outer edge of the planetary gap, which triggers the next generation of planet formation resulting in a compact chain of giant planets. A high planet formation efficiency is achieved as the first gas giants are effective in preventing dust from drifting further inwards, which preserves materials for planet formation. Sequential planet formation is a promising framework to explain the formation of chains of gas and ice giants.

astro-ph.EP

Vertical shear instability with dust evolution and consistent cooling times. On the importance of the initial dust distribution

Context. Gas in protoplanetary disks mostly cools via thermal accommodation with dust particles. Thermal relaxation is thus highly sensitive to the local dust size distributions and the spatial distribution of the grains. So far, the interplay between thermal relaxation and gas turbulence has not been dynamically modeled in hydrodynamic simulations of protoplanetary disks with dust. Aims. We aim to study the effects of the vertical shear instability (VSI) on the thermal relaxation times, and vice versa. We are particularly interested in the influence of the initial dust grain size on the VSI and whether the emerging turbulence is sustained over long timescales. Results. We find that the emergence of the VSI is strongly dependent on the initial dust grain size. Coagulation also counteracts the emergence of hydrodynamic turbulence in our simulations, as shown by others before. Starting a simulation with larger grains (100 $μ$m) generally leads to a less turbulent outcome. While the inner disk regions (within $\sim$ 70 au) develop turbulence in all three simulations, we find that the simulations with larger particles do not develop VSI in the outer disk. Conclusions. Our simulations with dynamically calculated thermal accommodation times based on the drifting and settling dust distribution show that the VSI, once developed in a disk, can be sustained over long timescales, even if grain growth is occurring. The VSI corrugates the dust layer and even diffuses the smaller grains into the upper atmosphere, where they can cool the gas. Whether the instability can emerge for a specific stratification depends on the initial dust grain sizes and the initial dust scale height. If the grains are initially $\gtrsim$ 100 $μ$m and if the level of turbulence is initially assumed to be low, we find no VSI turbulence in the outer disk regions.

astro-ph.EP

Disk Evolution Study Through Imaging of Nearby Young Stars (DESTINYS): PDS 111, an old T Tauri star with a young-looking disk

The interplay between T Tauri stars and their circumstellar disks, and how this impacts the onset of planet formation has yet to be established. We studied a seemingly old T Tauri star, PDS 111, and its disk. We analyzed optical, infrared, and sub-millimeter observations obtained with VLT/X-shooter, Mercator/HERMES, TESS, VLT/SPHERE, and ALMA, providing a new view on PDS 111 and its protoplanetary disk. The multi-epoch spectroscopy yields photospheric lines to classify the star, and emission lines to study variability in the hot inner disk and to determine the mass-accretion rate. The SPHERE and ALMA observations are used to characterize the dust distribution of the small and large grains, respectively. PDS 111 is a weak-line T Tauri star with spectral type G2, exhibits strong H$α$ variability and with a low mass-accretion rate of $1-5\times10^{-10}$\,M$_{\odot}$\,yr$^{-1}$. We measured an age of the system of 15.9$^{+1.7}_{-3.7}$ Myr using pre-main sequence tracks. The SPHERE observations show a strongly flaring disk with an asymmetric substructure. The ALMA observations reveal a 30 au cavity in the dust continuum emission with a low contrast asymmetry in the South-West of the disk and a dust disk mass of 45.8\,$M_\oplus$. The $^{12}$CO radial extension is at least three times larger than that of the dust emission. Although the measured age is younger than suggested in literature, PDS 111 still seems relatively old; this provides insight into disk properties at an advanced stage of pre-main sequence evolution. The characteristics of this disk are very similar to its younger counterparts: strongly flaring, an average disk mass, a typical radial extent of the disk gas and dust, and the presence of common substructures. This suggests that disk evolution has not significantly changed the disk properties. These results show similarities with the "Peter Pan disks" around M-dwarfs.

astro-ph.EP

TIPSY: Trajectory of Infalling Particles in Streamers around Young stars. Dynamical analysis of the streamers around S CrA and HL Tau

Context. Elongated trails of infalling gas, often referred to as "streamers," have recently been observed around young stellar objects (YSOs) at different evolutionary stages. This asymmetric infall of material can significantly alter star and planet formation processes, especially in the more evolved YSOs. Aims. In order to ascertain the infalling nature of observed streamer-like structures and then systematically characterize their dynamics, we developed the code TIPSY (Trajectory of Infalling Particles in Streamers around Young stars). Methods. Using TIPSY, the streamer molecular line emission is first isolated from the disk emission. Then the streamer emission, which is effectively a point cloud in three-dimensional (3D) position-position-velocity space, is simplified to a curve-like representation. The observed streamer curve is then compared to the theoretical trajectories of infalling material. The best-fit trajectories are used to constrain streamer features, such as the specific energy, the specific angular momenta, the infall timescale, and the 3D morphology. Results. We used TIPSY to fit molecular-line ALMA observations of streamers around a Class II binary system, S CrA, and a Class I/II protostar, HL Tau. Our results indicate that both of the streamers are consistent with infalling motion. TIPSY results and mass estimates suggest that S CrA and HL Tau are accreting material at a rate of $\gtrsim27$ M$_{jupiter}$ Myr$^{-1}$ and $\gtrsim5$ M$_{jupiter}$ Myr$^{-1}$, respectively, which can significantly increase the mass budget available to form planets. Conclusions. TIPSY can be used to assess whether the morphology and kinematics of observed streamers are consistent with infalling motion and to characterize their dynamics, which is crucial for quantifying their impact on the protostellar systems.

astro-ph.SR

Dust Coagulation Reconciles Protoplanetary Disk Observations with the Vertical Shear Instability. I. Dust Coagulation and the VSI Dead Zone

Protoplanetary disks exhibit a vertical gradient in angular momentum, rendering them susceptible to the Vertical Shear Instability (VSI). The most important condition for the onset of this mechanism is a short timescale of thermal relaxation ($\lesssim 0.1$ orbital timescales). Simulations of fully VSI active disks are characterized by turbulent, vertically extended dust layers. This is in contradiction with recent observations of the outer regions of some protoplanetary disks, which appear highly settled. In this work, we demonstrate that the process of dust coagulation can diminish the cooling rate of the gas in the outer disk and extinct the VSI activity. Our findings indicate that the turbulence strength is especially susceptible to variations in the fragmentation velocity of the grains. A small fragmentation velocity of $\approx 100 \mathrm{\, cm \,s^{-1}}$ results in a fully turbulent simulation, whereas a value of $\approx 400 \mathrm{\, cm \,s^{-1}}$ results in a laminar outer disk, being consistent with observations. We show that VSI turbulence remains relatively unaffected by variations in the maximum particle size in the inner disk regions. However, we find that dust coagulation can significantly suppress the occurrence of VSI turbulence at larger distances from the central star.

astro-ph.EP

Millimeter emission in photoevaporating disks is determined by early substructures

[abridged]Photoevaporation and dust-trapping are individually considered to be important mechanisms in the evolution and morphology of protoplanetary disks. We studied how the presence of early substructures affects the evolution of the dust distribution and flux in the millimeter continuum of disks that are undergoing photoevaporative dispersal. We also tested if the predicted properties resemble those observed in the population of transition disks. We used the numerical code Dustpy to simulate disk evolution considering gas accretion, dust growth, dust-trapping at substructures, and mass loss due to X-ray and EUV (XEUV) photoevaporation and dust entrainment. Then, we compared how the dust mass and millimeter flux evolve for different disk models. We find that, during photoevaporative dispersal, disks with primordial substructures retain more dust and are brighter in the millimeter continuum than disks without early substructures, regardless of the photoevaporative cavity size. Once the photoevaporative cavity opens, the estimated fluxes for the disk models that are initially structured are comparable to those found in the bright transition disk population ($F_\textrm{mm} > 30\, \textrm{mJy}$), while the disk models that are initially smooth have fluxes comparable to the transition disks from the faint population ($F_\textrm{mm} < 30\, \textrm{mJy}$), suggesting a link between each model and population. Our models indicate that the efficiency of the dust trapping determines the millimeter flux of the disk, while the gas loss due to photoevaporation controls the formation and expansion of a cavity, decoupling the mechanisms responsible for each feature. In consequence, even a planet with a mass comparable to Saturn could trap enough dust to reproduce the millimeter emission of a bright transition disk, while its cavity size is independently driven by photoevaporative dispersal.

astro-ph.EP

Three-Dimensional Dust Stirring by a Giant Planet Embedded in a Protoplanetary Disk

The motion of solid particles embedded in gaseous protoplanetary disks is influenced by turbulent fluctuations. Consequently, the dynamics of moderately to weakly coupled solids can be distinctly different from the dynamics of the gas. Additionally, gravitational perturbations from an embedded planet can further impact the dynamics of solids. In this work, we investigate the combined effects of turbulent fluctuations and planetary dust stirring in a protoplanetary disk on three-dimensional dust morphology and on synthetic ALMA continuum observations. We carry out 3D radiative two-fluid (gas+1-mm-dust) hydrodynamic simulations in which we explicitly model the gravitational perturbation of a Jupiter-mass planet. We derived a new momentum-conserving turbulent diffusion model that introduces a turbulent pressure to the pressureless dust fluid to capture the turbulent transport of dust. The model implicitly captures the effects of orbital oscillations and reproduces the theoretically predicted vertical settling-diffusion equilibrium. We find a Jupiter-mass planet to produce distinct and large-scale three-dimensional flow structures in the mm-size dust, which vary strongly in space. We quantify these effects by locally measuring an effective vertical diffusivity (equivalent alpha) and find azimuthally averaged values in a range $δ_\mathrm{eff}\sim5\cdot 10^{-3} - 2\cdot 10^{-2}$ and local peaks at values of up to $δ_\mathrm{eff}\sim3\cdot 10^{-1}$. In synthetic ALMA continuum observations of inclined disks, we find effects of turbulent diffusion to be observable, especially at disk edges, and effects of planetary dust stirring in edge-on observations.

astro-ph.EP

Carbon Depletion in the Early Solar System

Earth and other rocky objects in the inner Solar System are depleted in carbon compared to objects in the outer Solar System, the Sun, or the ISM. It is believed that this is a result of the selective removal of refractory carbon from primordial circumstellar material. In this work, we study the irreversible release of carbon into the gaseous environment via photolysis and pyrolysis of refractory carbonaceous material during the disk phase of the early Solar System. We analytically solve the one-dimensional advection equation and derive an explicit expression that describes the depletion of carbonaceous material in solids under the influence of radial and vertical transport. We find both depletion mechanisms individually fail to reproduce Solar System abundances under typical conditions. While radial transport only marginally restricts photodecomposition, it is the inefficient vertical transport that limits carbon depletion under these conditions. We show explicitly that an increase in the vertical mixing efficiency, and/or an increase in the directly irradiated disk volume, favors carbon depletion. Thermal decomposition requires a hot inner disk (> 500 K) beyond 3 AU to deplete the formation region of Earth and chondrites. We find FU Ori-type outbursts to produce these conditions such that moderately refractory compounds are depleted. However, such outbursts likely do not deplete the most refractory carbonaceous compounds beyond the innermost disk region. Hence, the refractory carbon abundance at 1 AU typically does not reach terrestrial levels. Nevertheless, under specific conditions, we find photolysis and pyrolysis combined to reproduce Solar System abundances.

astro-ph.EP

Reflections on nebulae around young stars: A systematic search for late-stage infall of material onto Class II disks

Context. While it is generally assumed that Class II sources evolve largely in isolation from their environment, many still lie close to molecular clouds and may continue to interact with them. This may result in late accretion of material onto the disk that can significantly influence disk processes and planet formation. Aims. In order to systematically study late infall of gas onto disks, we identify candidate Class II sources in close vicinity to a reflection nebula (RN) that may be undergoing this process. Methods. First we targeted Class II sources with known kilo-au scale gas structures - possibly due to late infall of material - and we searched for RNe in their vicinity in optical and near-infrared images. Second, we compiled a catalogue of Class II sources associated with RNe and looked for the large-scale CO structures in archival ALMA data. Using the catalogues of protostars and RNe, we also estimated the probability of Class II sources interacting with surrounding material. Results. All of the sources with large-scale gas structures also exhibit some reflection nebulosity in their vicinity. Similarly, at least five Class II objects associated with a prominent RNe, and for which adequate ALMA observations are available, were found to have spirals or stream-like structures which may be due to late infall. We report the first detection of these structures around S CrA. Conclusions. Our results suggest that a non-negligible fraction of Class II disks in nearby star-forming regions may be associated with RNe and could therefore be undergoing late accretion of gas. Surveys of RNe and kilo-au scale gas structures around Class II sources will allow us to better understand the frequency and impact of late-infall phenomena.

astro-ph.SR