arXiv subjects

Tim A. Birks

Publications and source records attributed to Tim A. Birks.

15 recordsLinked to original sources

arXiv2025

Tunable megawatt-scale sub-20 fs visible pulses from a fiber laser source

Ultrafast laser pulses that are both tunable in wavelength and very short in duration are essential tools in fields ranging from biomedical imaging to ultrafast spectroscopy. While resonant dispersive-wave emission in gas-filled hollow-core fibers is a powerful technique for generating such pulses, it has traditionally required complex and expensive pump laser systems. In this work, we present a more compact and accessible alternative that combines gain-managed nonlinear amplification with resonant dispersive-wave emission. Our system produces sub-20 femtosecond pulses tunable from 400 nm to beyond 700 nm, with energies up to 39 nJ and peak powers exceeding 2 MW, operating at a 4.8 MHz repetition rate. This compact and efficient laser source opens new avenues for deploying resonant dispersive-wave-based technologies for broader scientific and industrial applications.

physics.optics↗

arXiv2024

Resonance-free deep ultraviolet to near infrared supercontinuum generation in a hollow-core antiresonant fibre

Supercontinuum generation in the ultraviolet spectral region is challenging in solid-core optical fibres due to solarization and photodarkening. Antiresonant hollow-core fibres have overcome this limitation and have been shown to guide ultraviolet light at sufficient intensity for ultraviolet spectral broadening through nonlinear optics in the filling gas. However, their ultraviolet guidance is usually limited by discontinuities caused by the presence of high-loss resonance bands. In this paper, we report on resonance-free supercontinuum generation spanning from the deep ultraviolet to the near infrared achieved through modulation instability in an argon-filled antiresonant hollow-core fibre. The fibre was directly fabricated using the stack-and-draw method with a wall thickness of approximately 90 nm, enabling continuous spectral coverage from the deep ultraviolet to the near infrared. We also report numerical simulations to investigate the supercontinuum bandwidth and the factors limiting it, finding that the overall dispersion landscape, and associated group-velocity matching of cross-phase modulation interactions, is the dominant constraint on spectral extension.

physics.optics↗

arXiv2024

Guidance of ultraviolet light down to 190 nm in a hollow-core optical fibre

We report an anti-resonant hollow core fibre with ultraviolet transmission down to 190 nm, covering the entire UV-A, UV-B and much of the UV-C band. Guidance from 190 - 400 nm is achieved apart for a narrow high loss resonance band at 245 - 265 nm. The minimum attenuation is 0.13 dB/m at 235 nm and 0.16 dB/m at 325 nm. With an inscribed core diameter of ~ 12 $μ$m, the fibre's bend loss at 325 nm was 0.22 dB per turn for a bend radius of 3 cm at 325 nm.

physics.optics↗

arXiv2024

Low-loss, compact, fibre-integrated cell for quantum memories

We present a low-loss, compact, hollow core optical fibre (HCF) cell integrated with single mode fibre (SMF). The cell is designed to be filled with atomic vapour and used as a component in photonic quantum technologies, with applications in quantum memory and optical switching. We achieve a total insertion loss of 0.6(2) dB at 780 nm wavelength via graded index fibre to ensure efficient mode matching coupled with anti-reflection coatings to minimise loss at the SMF-HCF interfaces. We also present numerical modelling of these interfaces, which can be undertaken efficiently without the need for finite element simulation. We encapsulate the HCF core by coupling to the SMF inside a support capillary, enhancing durability and facilitating seamless integration into existing fibre platforms.

quant-ph↗

arXiv2022

All-fibre wavefront sensor

We report on a tapered three-core optical fibre that can be used as a tip-tilt wavefront sensor. In this device, a coupled region of a few millimetres at the sensing tip of the fibre converts fragile phase information from an incoming wavefront into robust intensity information within each of the cores. The intensity information can be easily converted to linear wavefront error over small ranges, making it ideal for closed loop systems. The sensor uses minimal information to infer tip-tilt and is compatible with remote detector arrays. We explore its application within adaptive optics and present a validation case to show its applicability to astronomy.

astro-ph.IM↗

arXiv2021

3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets

By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost.

astro-ph.IM↗

arXiv2021

An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru

In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.

astro-ph.IM↗

arXiv2020

Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit

Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact and easy to integrate into current and future direct imaging instruments for exoplanet characterization. This achieved by making use of recent progress in photonic manufacturing to create a single-mode fiber-fed image reformatter. The fiber-link is created with 3D printed lenses on top of a single-mode multi-core fiber that feeds an ultrafast laser inscribed photonic chip that reformats the fiber into a pseudo-slit. We then couple it to a first-order spectrograph with a triple stacked volume phase holographic grating for a high efficiency over a large bandwidth. The prototype system has had a successful first-light observing run at the 4.2 meter William Herschel Telescope. The measured on-sky resolving power is between 2500 and 3000, depending on the wavelength. With our observations we show that single-mode integral-field spectroscopy is a viable option for current and future exoplanet imaging instruments.

astro-ph.IM↗

arXiv2020

Focal-ratio-degradation (FRD) mitigation in a multimode fiber link using mode-selective photonic lanterns

We present a new way to mitigate focal-ratio degradation (FRD) when using optical fibers to transport multimode light. Our approach exploits a custom multicore fiber (MCF) with six dissimilar cores that are single mode at ~1550 nm wavelength and minimally coupled over 7 m. We fabricated adiabatic mode-selective photonic lanterns (PLs) at each end of the MCF to create a fiber link with multimode ports, the PLs coupling each spatial mode of the multimode ports to a specific core of the MCF and vice versa. The PL-MCF-PL link exhibits superior FRD behavior compared to a conventional multimode fiber that also supports 6 modes, because it inhibits the transfer of light from lower-order modes to higher-order modes. These results open up a potentially powerful new approach to mitigate FRD in multimode fiber links, with particular applications in astronomical instruments.

physics.optics↗

arXiv2020

Modal noise mitigation for high-precision spectroscopy using a photonic reformatter

Recently, we demonstrated how an astrophotonic light reformatting device, based on a multicore fibre photonic lantern and a three-dimensional waveguide component, can be used to efficiently reformat the point spread function of a telescope to a diffraction-limited psuedo-slit [arXiv:1512.07309]. Here, we demonstrate how such a device can also efficiently mitigate modal noise -- a potential source of instability in high resolution multi-mode fibre-fed spectrographs). To investigate the modal noise performance of the photonic reformatter, we have used it to feed light into a bench-top near-infrared spectrograph (R {\approx} 9,500, λ {\approx} 1550 nm). One approach to quantifying the modal noise involved the use of broadband excitation light and a statistical analysis of how the overall measured spectrum was affected by variations in the input coupling conditions. This approach indicated that the photonic reformatter could reduce modal noise by a factor of six when compared to a multi-mode fibre with a similar number of guided modes. Another approach to quantifying the modal noise involved the use of multiple spectrally narrow lines, and an analysis of how the measured barycentres of these lines were affected by variations in the input coupling. Using this approach, the photonic reformatter was observed to suppress modal noise to the level necessary to obtain spectra with stability close to that observed when using a single mode fibre feed. These results demonstrate the potential of using photonic reformatters to enable efficient multi-mode spectrographs that operate at the diffraction limit and are free of modal noise, with potential applications including radial velocity measurements of M-dwarfs.

astro-ph.IM↗

arXiv2019

Compressive optical imaging with a photonic lantern

The thin and flexible nature of optical fibres often makes them the ideal technology to view biological processes in-vivo, but current microendoscopic approaches are limited in spatial resolution. Here, we demonstrate a new route to high resolution microendoscopy using a multicore fibre (MCF) with an adiabatic multimode-to-singlemode photonic lantern transition formed at the distal end by tapering. We show that distinct multimode patterns of light can be projected from the output of the lantern by individually exciting the single-mode MCF cores, and that these patterns are highly stable to fibre movement. This capability is then exploited to demonstrate a form of single-pixel imaging, where a single pixel detector is used to detect the fraction of light transmitted through the object for each multimode pattern. A custom compressive imaging algorithm we call SARA-COIL is used to reconstruct the object using only the pre-measured multimode patterns themselves and the detector signals.

physics.optics↗

arXiv2017

Multicore fibre photonic lanterns for precision radial velocity science

Envisioning more compact and cost accessible astronomical instruments is now possible with existing photonic technologies like specialty optical fibres, photonic lanterns and ultrafast laser inscribed chips. We present an original design of a multicore fibre (MCF) terminated with multimode photonic lantern ports. It is designed to act as a relay fibre with the coupling effciency of a multimode fibre, modal stability similar to a single-mode fibre and low loss in a wide range of wavelengths (380 nm to 860 nm). It provides phase and amplitude scrambling to achieve a stable near field and far field output illumination pattern despite input coupling variations, and low modal noise for increased photometric stability for high signal-to-noise applications such as precision radial velocity (PRV) science. Preliminary results are presented for a 511-core MCF and compared with current state of the art octagonal fibre.

astro-ph.IM↗

arXiv2016

Multiplexed Single-Mode Wavelength-to-Time Mapping of Multimode Light

We demonstrate that photonic lanterns based on tapered multicore fibres provide an efficient way to couple multimode states of light to a two-dimensional array of Single-Photon Avalanche Detectors (SPADs), each of which has its own Time-to-Digital Converter (TDC) for Time-Correlated Single-Photon-Counting (TCSPC). Exploiting this capability, we demonstrate multiplexed single-mode wavelength-to-time conversion of multimode states of light using a multicore-fibre photonic lantern with 121 single-mode cores, coupled in a one-to-one fashion to 121 SPADS on a 32 $\times$ 32 pixel CMOS SPAD array. The application of photonic lanterns for coupling multimode light to SPAD arrays in this manner may find wide-ranging applications in areas such as Raman spectroscopy, coherent LIDAR and quantum optics.

physics.optics↗

arXiv2015

Efficient photonic reformatting of celestial light for diffraction-limited spectroscopy

The spectral resolution of a dispersive astronomical spectrograph is limited by the trade-off between throughput and the width of the entrance slit. Photonic guided-wave transitions have been proposed as a route to bypass this trade-off, by enabling the efficient reformatting of incoherent seeing-limited light collected by the telescope into a linear array of single modes: a pseudo-slit which is highly multimode in one axis but diffraction-limited in the dispersion axis of the spectrograph. It is anticipated that the size of a single-object spectrograph fed with light in this manner would be essentially independent of the telescope aperture size. A further anticipated benefit is that such spectrographs would be free of `modal noise', a phenomenon that occurs in high-resolution multimode fibre-fed spectrographs due to the coherent nature of the telescope point-spread-function (PSF). We address these aspects by integrating a multicore fibre photonic lantern with an ultrafast laser inscribed three-dimensional waveguide interconnect to spatially reformat the modes within the PSF into a diffraction-limited pseudo-slit. Using the CANARY adaptive optics (AO) demonstrator on the William Herschel Telescope, and 1530 $\pm$ 80 nm stellar light, the device is found to exhibit a transmission of 47-53 % depending upon the mode of AO correction applied. We also show the advantage of using AO to couple light into such a device by sampling only the core of the CANARY PSF. This result underscores the possibility that a fully-optimised guided-wave device can be used with AO to provide efficient spectroscopy at high spectral resolution.

astro-ph.IM↗

arXiv2014

Characterizing the variation of propagation constants in multicore fibre

We demonstrate a numerical technique that can evaluate the core-to-core variations in propagation constant in multicore fibre. Using a Markov Chain Monte Carlo process, we replicate the interference patterns of light that has coupled between the cores during propagation. We describe the algorithm and verify its operation by successfully reconstructing target propagation constants in a fictional fibre. Then we carry out a reconstruction of the propagation constants in a real fibre containing 37 single-mode cores. We find that the range of fractional propagation constant variation across the cores is approximately $\pm2 \times 10^{-5}$.

physics.optics↗