arXiv subjects

Tim Gould

Publications and source records attributed to Tim Gould.

51 records · Page 3Linked to original sources

arXiv2014

Atomic correlation energies and the generalized gradient approximation

Careful extrapolation of atomic correlation energies suggests that $E_c$ tends to $-AZ\log{Z} + BZ$ as $Z$ tends to infinity, where $Z$ is the atomic number, $A$ is known, and $B$ is about 38 milliHartrees. The coefficients roughly agree with those of the high-density limit of the real-space construction of the generalized gradient approximation. An asymptotic coefficient, missed by previous derivations, is included in a revised approximation. The exchange is also corrected, reducing atomic errors considerably.

cond-mat.mtrl-sci↗

arXiv2014

The flexible nature of exchange, correlation and Hartree physics: resolving "delocalization" errors in a 'correlation free' density functional

By exploiting freedoms in the definitions of 'correlation', 'exchange' and 'Hartree' physics in ensemble systems we better generalise the notion of 'exact exchange' (EXX) to systems with fractional occupations functions of the frontier orbitals, arising in the dissociation limit of some molecules. We introduce the Linear EXX ("LEXX") theory whose pair distribution and energy are explicitly \emph{piecewise linear} in the occupations $f^σ_{i}$. {\hi}We provide explicit expressions for these functions for frontier $s$ and $p$ shells. Used in an optimised effective potential (OEP) approach it yields energies bounded by the piecewise linear 'ensemble EXX' (EEXX) energy and standard fractional optimised EXX energy: $E^{EEXX}\leq E^{LEXX} \leq E^{EXX}$. Analysis of the LEXX explains the success of standard OEP methods for diatoms at large spacing, and why they can fail when both spins are allowed to be non-integer so that "ghost" Hartree interactions appear between \emph{opposite} spin electrons in the usual formula. The energy $E^{LEXX}$ contains a cancellation term for the spin ghost case. It is evaluated for H, Li and Na fractional ions with clear derivative discontinuities for all cases. The $p$-shell form reproduces accurate correlation-free energies of B-F and Al-Cl. We further test LEXX plus correlation energy calculations on fractional ions of C and F and again shows both derivative discontinuities and good agreement with exact results.

physics.atom-ph↗

arXiv2014

A comment on "Interlayer interactions in graphites" [Chen et al., Sci. Rep. 3, 3046 (2013)]

Determining the material properties of layered systems like graphite and bigraphene from \emph{ab initio} calculations is very difficult. This is mostly due to the complex van der Waals forces which help bind the layers. Recently, Chen~\emph{et al.} [Chen et al., Sci. Rep. 3, 3046 (2013)] reported a novel approach for extracting geometry dependent energetic properties of general, layered graphitic systems from periodic graphite calculations on AA, AB and ABC graphite. Unfortunately, their analysis suffered from a number of technical and theoretical flaws which make their results unreliable for predicting energetic properties. We propose that their conclusions in this regard should be reassessed, or reanalysed using more appropriate van der Waals theory.

cond-mat.mtrl-sci↗

arXiv2014

How many-body effects modify the van der Waals interaction between graphene sheets

Undoped graphene (Gr) sheets at low temperatures are known, via Random Phase Approximation (RPA) calculations, to exhibit unusual van der Waals (vdW) forces. Here we show that graphene is the first known system where effects beyond the RPA make qualitative changes to the vdW force. For large separations, $D \gtrsim 10$nm where only the $π_z$ vdW forces remain, we find the Gr-Gr vdW interaction is substantially reduced from the RPA prediction. Its $D$ dependence is very sensitive to the form of the long-wavelength many-body enhancement of the velocity of the massless Dirac fermions, and may provide independent confirmation of the latter via direct force measurements.

cond-mat.str-el↗

arXiv2013

Binding and interlayer force in the near-contact region of two graphite slabs: experiment and theory

Via a novel experiment, Liu \emph{et al.} [Phys. Rev. B, {\bf 85}, 205418 (2012)] estimated the graphite binding energy, specifically the cleavage energy, an important physical property of bulk graphite. We re-examine the data analysis and note that within the standard Lennard-Jones model employed, there are difficulties in achieving internal consistency in the reproduction of the graphite elastic properties. By employing similar models which guarantee consistency with the elastic constant, we find a wide range of model dependent binding energy values from the same experimental data. We attribute some of the difficulty in the determination of the binding energy to: i) limited theoretical understanding of the van der Waals dispersion of graphite cleavage, ii) the mis-match between the strong bending stiffness of the graphite-SiO$_2$ cantilever and the weak asymptotic inter-layer forces that are integrated over to produce the binding energy. We find, however, that the data does support determination of a maximum inter-layer force that is relatively model independent. We conclude that the peak force per unit area is $1.1 \pm 0.15$GPa for cleavage, and occurs at an inter-layer spacing of $0.377\pm 0.013$nm.

cond-mat.mtrl-sci↗

arXiv2013

Dispersion corrections in graphenic systems: a simple and effective model of binding

We combine high-level theoretical and \emph{ab initio} understanding of graphite to develop a simple, parametrised force-field model of interlayer binding in graphite, including the difficult non-pairwise-additive coupled-fluctuation dispersion interactions. The model is given as a simple additive correction to standard density functional theory (DFT) calculations, of form $ΔU(D)=f(D)[U^{vdW}(D)-U^{DFT}(D)]$ where $D$ is the interlayer distance. The functions are parametrised by matching contact properties, and long-range dispersion to known values, and the model is found to accurately match high-level \emph{ab initio} results for graphite across a wide range of $D$ values. We employ the correction on the difficult bigraphene binding and graphite exfoliation problems, as well as lithium intercalated graphite LiC$_6$. We predict the binding energy of bigraphene to be 0.27 J/m^2, and the exfoliation energy of graphite to be 0.31 J/m^2, respectively slightly less and slightly more than the bulk layer binding energy 0.295 J/m^2/layer. Material properties of LiC$_6$ are found to be essentially unchanged compared to the local density approximation. This is appropriate in view of the relative unimportance of dispersion interactions for LiC$_6$ layer binding.

cond-mat.mtrl-sci↗

arXiv2013

Assessment of range-separated time-dependent density-functional theory for calculating C6 dispersion coefficients

We assess a variant of linear-response range-separated time-dependent density-functional theory (TDDFT), combining a long-range Hartree-Fock (HF) exchange kernel with a short-range adiabatic exchange-correlation kernel in the local-density approximation (LDA) for calculating isotropic C6 dispersion coefficients of homodimers of a number of closed-shell atoms and small molecules. This range-separated TDDFT tends to give underestimated C6 coefficients of small molecules with a mean absolute percentage error of about 5%, a slight improvement over standard TDDFT in the adiabatic LDA which tends to overestimate them with a mean absolute percentage error of 8%, but close to time-dependent Hartree-Fock which has a mean absolute percentage error of about 6%. These results thus show that introduction of long-range HF exchange in TDDFT has a small but beneficial impact on the values of C6 coefficients. It also confirms that the present variant of range-separated TDDFT is a reasonably accurate method even using only a LDA-type density functional and without adding an explicit treatment of long-range correlation.

physics.chem-ph↗

arXiv2012

Beyond the RPA on the cheap: improved correlation energies with the efficient "Radial Exchange Hole" kernel

The "ACFD-RPA" correlation energy functional has been widely applied to a variety of systems to successfully predict energy differences, and less successfully predict absolute correlation energies. Here we present a parameter-free exchange-correlation kernel that systematically improves absolute correlation energies, while maintaining most of the good numerical properties that make the ACFD-RPA numerically tractable. The "RXH" kernel is constructed to approximate the true exchange kernel via a carefully weighted, easily computable radial averaging. Correlation energy errors of atoms with two to eighteen electrons show a thirteenfold improvement over the RPA and a threefold improvement over the related "PGG" kernel, for a mean absolute error of 13mHa or 5%. The average error is small compared to all but the most difficult to evaluate kernels. van der Waals $C_6$ coefficients are less well predicted, but still show improvements on the RPA, especially for highly polarisable Li and Na.

physics.atom-ph↗

arXiv2012

Quantum Continuum Mechanics Made Simple

In this paper we further explore and develop the quantum continuum mechanics (CM) of [Tao \emph{et al}, PRL{\bf 103},086401] with the aim of making it simpler to use in practice. Our simplifications relate to the non-interacting part of the CM equations, and primarily refer to practical implementations in which the groundstate stress tensor is approximated by its Kohn-Sham version. We use the simplified approach to directly prove the exactness of CM for one-electron systems via an orthonormal formulation. This proof sheds light on certain physical considerations contained in the CM theory and their implication on CM-based approximations. The one-electron proof then motivates an approximation to the CM (exact under certain conditions) expanded on the wavefunctions of the Kohn-Sham (KS) equations. Particular attention is paid to the relationships between transitions from occupied to unoccupied KS orbitals and their approximations under the CM. We also demonstrate the simplified CM semi-analytically on an example system.

physics.chem-ph↗

arXiv2012

Correlation energies beyond the random-phase approximation: ISTLS applied to spherical atoms and ions

The inhomogeneous Singwi, Tosi, Land and Sjolander (ISTLS) correlation energy functional of Dobson, Wang and Gould [PRB {\bf 66} 081108(R) (2008)] has proved to be excellent at predicting correlation energies in semi-homogeneous systems, showing promise as a robust `next step' fifth-rung functional by using dynamic correlation to go beyond the limitations of the direct random-phase approximation (dRPA), but with similar numerical scaling with system size. In this work we test the functional on fourteen spherically symmetric, neutral and charged atomic systems and find it gives excellent results (within 2mHa/$e^-$ except Be) for the absolute correlation energies of the neutral atoms tested, and good results for the ions (within 4mHa/$e^-$). In all cases it performs better than the dRPA. When combined with the previous successes, these new results point to the ISTLS functional being a prime contender for high-accuracy, benchmark DFT correlation energy calculations.

physics.atom-ph↗

arXiv2011

Efficient, long-range correlation from occupied wavefunctions only

We use continuum mechanics [Tao \emph{et al}, PRL{\bf 103},086401] to approximate the dynamic density response of interacting many-electron systems. Thence we develop a numerically efficient exchange-correlation energy functional based on the Random Phase Approximation (dRPA). The resulting binding energy curve $E(D)$ for thin parallel metal slabs at separation $D$ better agrees with full dRPA calculations than does the Local Density Approximation. We also reproduce the correct non-retarded van der Waals (vdW) power law $E(D)\aeq -C_{5/2}D^{-5/2}$ as $D\to\infty$, unlike most vdW functionals.

cond-mat.mes-hall↗

arXiv2009

van der Waals dispersion power laws for cleavage, exfoliation and stretching in multi-scale, layered systems

Layered and nanotubular systems that are metallic or graphitic are known to exhibit unusual dispersive van der Waals (vdW) power laws under some circumstances. In this letter we investigate the vdW power laws of bulk and finite layered systems and their interactions with other layered systems and atoms in the electromagnetically non-retarded case. The investigation reveals substantial difference between `cleavage' and `exfoliation' of graphite and metals where cleavage obeys a $C_2 D^{-2}$ vdW power law while exfoliation obeys a $C_3 \log(D/D_0) D^{-3}$ law for graphitics and a $C_{5/2} D^{-5/2}$ law for layered metals. This leads to questions of relevance in the interpretation of experimental results for these systems which have previously assumed more trival differences. Furthermore we gather further insight into the effect of scale on the vdW power laws of systems that simultaneously exhibit macroscopic and nanoscopic dimensions. We show that, for metallic and graphitic layered systems, the known "unusual" power laws can be reduced to standard or near standard power laws when the effective scale of one or more dimension is changed. This allows better identification of the systems for which the commonly employed `sum of $C_6 D^{-6}$' type vdW methods might be valid such as layered bulk to layered bulk and layered bulk to atom.

cond-mat.mtrl-sci↗

arXiv2008

A theoretical and semiemprical correction to the long-range dispersion power law of stretched graphite

In recent years intercalated and pillared graphitic systems have come under increasing scrutiny because of their potential for modern energy technologies. While traditional \emph{ab initio} methods such as the LDA give accurate geometries for graphite they are poorer at predicting physicial properties such as cohesive energies and elastic constants perpendicular to the layers because of the strong dependence on long-range dispersion forces. `Stretching' the layers via pillars or intercalation further highlights these weaknesses. We use the ideas developed by [J. F. Dobson et al, Phys. Rev. Lett. {\bf 96}, 073201 (2006)] as a starting point to show that the asymptotic $C_3 D^{-3}$ dependence of the cohesive energy on layer spacing $D$ in bigraphene is universal to all graphitic systems with evenly spaced layers. At spacings appropriate to intercalates, this differs from and begins to dominate the $C_4 D^{-4}$ power law for dispersion that has been widely used previously. The corrected power law (and a calculated $C_3$ coefficient) is then unsuccesfully employed in the semiempirical approach of [M. Hasegawa and K. Nishidate, Phys. Rev. B {\bf 70}, 205431 (2004)] (HN). A modified, physicially motivated semiempirical method including some $C_4 D^{-4}$ effects allows the HN method to be used successfully and gives an absolute increase of about $2-3%$ to the predicted cohesive energy, while still maintaining the correct $C_3 D^{-3}$ asymptotics.

cond-mat.mtrl-sci↗

arXiv2004

Defective beams in MEMS: a model of non-ideal rods using a Cosserat approach for component level modelling

We present and derive a technique for the introduction of defects into a beam model based on the Cosserat theory of rods. The technique is designed for the derivation of component models of non-ideal rods for use in MEMS devices. We also present a worked through example of blob/nick defects (where the rod has an area with an excess/lack of material) and a guide for a model with random pits and blobs along the length of the beam. Finally we present a component level model of a beam with a defect and compare it to results from a Finite Element Analysis simulation. We test the Cosserat model for two cases without any defect and four with a defect. Results are in good agreement with a maximum 0.5% difference for the ideal case and under 1% differences for all but one of the defective cases, the exception being a 2% error in an extreme case for which the model is expected to break down. Overall, the Cosserat model with and without defects provides an accurate way of modelling long slender beams. In addition, simulation times are greatly reduced through this approach and further development for both component level models as well as as FEA components is important for practical yet accurate modelling of MEMS both for prediction and comparison.

math-ph↗

arXiv2002

Correlation energies of inhomogeneous many-electron systems

We generalize the uniform-gas correlation energy formalism of Singwi, Tosi, Land and Sjolander to the case of an arbitrary inhomogeneous many-particle system. For jellium slabs of finite thickness with a self-consistent LDA groundstate Kohn-Sham potential as input, our numerical results for the correlation energy agree well with diffusion Monte Carlo results. For a helium atom we also obtain a good correlation energy.

cond-mat↗