arXiv subjects

Tim Ophelders

Publications and source records attributed to Tim Ophelders.

32 records · Page 2Linked to original sources

arXiv2022

A Subquadratic $n^ε$-approximation for the Continuous Fréchet Distance

The Fréchet distance is a commonly used similarity measure between curves. It is known how to compute the continuous Fréchet distance between two polylines with $m$ and $n$ vertices in $\mathbb{R}^d$ in $O(mn (\log \log n)^2)$ time; doing so in strongly subquadratic time is a longstanding open problem. Recent conditional lower bounds suggest that it is unlikely that a strongly subquadratic algorithm exists. Moreover, it is unlikely that we can approximate the Fréchet distance to within a factor $3$ in strongly subquadratic time, even if $d=1$. The best current results establish a tradeoff between approximation quality and running time. Specifically, Colombe and Fox (SoCG, 2021) give an $O(α)$-approximate algorithm that runs in $O((n^3 / α^2) \log n)$ time for any $α\in [\sqrt{n}, n]$, assuming $m = n$. In this paper, we improve this result with an $O(α)$-approximate algorithm that runs in $O((n + mn / α) \log^3 n)$ time for any $α\in [1, n]$, assuming $m \leq n$ and constant dimension $d$.

cs.CG↗

arXiv2022

Minimum Height Drawings of Ordered Trees in Polynomial Time: Homotopy Height of Tree Duals

We consider drawings of graphs in the plane in which vertices are assigned distinct points in the plane and edges are drawn as simple curves connecting the vertices and such that the edges intersect only at their common endpoints. There is an intuitive quality measure for drawings of a graph that measures the height of a drawing $ϕ: G \rightarrow \mathbb{R}^2$ as follows. For a vertical line $\ell$ in $\mathbb{R}^2$, let the height of $\ell$ be the cardinality of the set $\ell \cap ϕ(G)$. The height of a drawing of $G$ is the maximum height over all vertical lines. In this paper, instead of abstract graphs, we fix a drawing and consider plane graphs. In other words, we are looking for a homeomorphism of the plane that minimizes the height of the resulting drawing. This problem is equivalent to the homotopy height problem in the plane, and the homotopic Fréchet distance problem. These problems were recently shown to lie in NP, but no polynomial-time algorithm or NP-hardness proof has been found since their formulation in 2009. We present the first polynomial-time algorithm for drawing trees with optimal height. This corresponds to a polynomial-time algorithm for the homotopy height where the triangulation has only one vertex (that is, a set of loops incident to a single vertex), so that its dual is a tree.

cs.CG↗

arXiv2022

Efficient Fréchet distance queries for segments

We study the problem of constructing a data structure that can store a two-dimensional polygonal curve $P$, such that for any query segment $\overline{ab}$ one can efficiently compute the Fréchet distance between $P$ and $\overline{ab}$. First we present a data structure of size $O(n \log n)$ that can compute the Fréchet distance between $P$ and a horizontal query segment $\overline{ab}$ in $O(\log n)$ time, where $n$ is the number of vertices of $P$. In comparison to prior work, this significantly reduces the required space. We extend the type of queries allowed, as we allow a query to be a horizontal segment $\overline{ab}$ together with two points $s, t \in P$ (not necessarily vertices), and ask for the Fréchet distance between $\overline{ab}$ and the curve of $P$ in between $s$ and $t$. Using $O(n\log^2n)$ storage, such queries take $O(\log^3 n)$ time, simplifying and significantly improving previous results. We then generalize our results to query segments of arbitrary orientation. We present an $O(nk^{3+\varepsilon}+n^2)$ size data structure, where $k \in [1..n]$ is a parameter the user can choose, and $\varepsilon > 0$ is an arbitrarily small constant, such that given any segment $\overline{ab}$ and two points $s, t \in P$ we can compute the Fréchet distance between $\overline{ab}$ and the curve of $P$ in between $s$ and $t$ in $O((n/k)\log^2n+\log^4 n)$ time. This is the first result that allows efficient exact Fréchet distance queries for arbitrarily oriented segments. We also present two applications of our data structure: we show that we can compute a local $δ$-simplification (with respect to the Fréchet distance) of a polygonal curve in $O(n^{5/2+\varepsilon})$ time, and that we can efficiently find a translation of an arbitrary query segment $\overline{ab}$ that minimizes the Fréchet distance with respect to a subcurve of $P$.

cs.CG↗

arXiv2021

Convex Polygons in Cartesian Products

We study several problems concerning convex polygons whose vertices lie in a Cartesian product of two sets of $n$ real numbers (for short, \emph{grid}). First, we prove that every such grid contains $Ω(\log n)$ points in convex position and that this bound is tight up to a constant factor. We generalize this result to $d$ dimensions (for a fixed $d\in \mathbb{N}$), and obtain a tight lower bound of $Ω(\log^{d-1}n)$ for the maximum number of points in convex position in a $d$-dimensional grid. Second, we present polynomial-time algorithms for computing the longest $x$- or $y$-monotone convex polygonal chain in a grid that contains no two points with the same $x$- or $y$-coordinate. We show that the maximum size of a convex polygon with such unique coordinates can be efficiently approximated up to a factor of $2$. Finally, we present exponential bounds on the maximum number of point sets in convex position in such grids, and for some restricted variants. These bounds are tight up to polynomial factors.

cs.CG↗

arXiv2021

Computing the Fréchet Distance Between Uncertain Curves in One Dimension

We consider the problem of computing the Fréchet distance between two curves for which the exact locations of the vertices are unknown. Each vertex may be placed in a given uncertainty region for that vertex, and the objective is to place vertices so as to minimise the Fréchet distance. This problem was recently shown to be NP-hard in 2D, and it is unclear how to compute an optimal vertex placement at all. We present the first general algorithmic framework for this problem. We prove that it results in a polynomial-time algorithm for curves in 1D with intervals as uncertainty regions. In contrast, we show that the problem is NP-hard in 1D in the case that vertices are placed to maximise the Fréchet distance. We also study the weak Fréchet distance between uncertain curves. While finding the optimal placement of vertices seems more difficult than the regular Fréchet distance -- and indeed we can easily prove that the problem is NP-hard in 2D -- the optimal placement of vertices in 1D can be computed in polynomial time. Finally, we investigate the discrete weak Fréchet distance, for which, somewhat surprisingly, the problem is NP-hard already in 1D.

cs.CG↗

arXiv2021

A family of metrics from the truncated smoothing of Reeb graphs

In this paper, we introduce an extension of smoothing on Reeb graphs, which we call truncated smoothing; this in turn allows us to define a new family of metrics which generalize the interleaving distance for Reeb graphs. Intuitively, we "chop off" parts near local minima and maxima during the course of smoothing, where the amount cut is controlled by a parameter $τ$. After formalizing truncation as a functor, we show that when applied after the smoothing functor, this prevents extensive expansion of the range of the function, and yields particularly nice properties (such as maintaining connectivity) when combined with smoothing for $0 \leq τ\leq 2\varepsilon$, where $\varepsilon$ is the smoothing parameter. Then, for the restriction of $τ\in [0,\varepsilon]$, we have additional structure which we can take advantage of to construct a categorical flow for any choice of slope $m \in [0,1]$. Using the infrastructure built for a category with a flow, this then gives an interleaving distance for every $m \in [0,1]$, which is a generalization of the original interleaving distance, which is the case $m=0$. While the resulting metrics are not stable, we show that any pair of these for $m,m' \in [0,1)$ are strongly equivalent metrics, which in turn gives stability of each metric up to a multiplicative constant. We conclude by discussing implications of this metric within the broader family of metrics for Reeb graphs.

cs.CG↗

arXiv2021

Polygon-Universal Graphs

We study a fundamental question from graph drawing: given a pair $(G,C)$ of a graph $G$ and a cycle $C$ in $G$ together with a simple polygon $P$, is there a straight-line drawing of $G$ inside $P$ which maps $C$ to $P$? We say that such a drawing of $(G,C)$ respects $P$. We fully characterize those instances $(G,C)$ which are polygon-universal, that is, they have a drawing that respects $P$ for any simple (not necessarily convex) polygon $P$. Specifically, we identify two necessary conditions for an instance to be polygon-universal. Both conditions are based purely on graph and cycle distances and are easy to check. We show that these two conditions are also sufficient. Furthermore, if an instance $(G,C)$ is planar, that is, if there exists a planar drawing of $G$ with $C$ on the outer face, we show that the same conditions guarantee for every simple polygon $P$ the existence of a planar drawing of $(G,C)$ that respects $P$. If $(G,C)$ is polygon-universal, then our proofs directly imply a linear-time algorithm to construct a drawing that respects a given polygon $P$.

cs.CG↗

arXiv2021

Between Shapes, Using the Hausdorff Distance

Given two shapes $A$ and $B$ in the plane with Hausdorff distance $1$, is there a shape $S$ with Hausdorff distance $1/2$ to and from $A$ and $B$? The answer is always yes, and depending on convexity of $A$ and/or $B$, $S$ may be convex, connected, or disconnected. We show that our result can be generalised to give an interpolated shape between $A$ and $B$ for any interpolation variable $α$ between $0$ and $1$, and prove that the resulting morph has a bounded rate of change with respect to $α$. Finally, we explore a generalization of the concept of a Hausdorff middle to more than two input sets. We show how to approximate or compute this middle shape, and that the properties relating to the connectedness of the Hausdorff middle extend from the case with two input sets. We also give bounds on the Hausdorff distance between the middle set and the input.

cs.CG↗

arXiv2021

Constructing monotone homotopies and sweepouts

This article investigates when homotopies can be converted to monotone homotopies without increasing the lengths of curves. A monotone homotopy is one which consists of curves which are simple or constant, and in which curves are pairwise disjoint. We show that, if the boundary of a Riemannian disc can be contracted through curves of length less than $L$, then it can also be contracted monotonously through curves of length less than $L$. This proves a conjecture of Chambers and Rotman. Additionally, any sweepout of a Riemannian $2$-sphere through curves of length less than $L$ can be replaced with a monotone sweepout through curves of length less than $L$. Applications of these results are also discussed.

math.DG↗

arXiv2020

Automatic Tree Ring Detection using Jacobi Sets

Tree ring widths are an important source of climatic and historical data, but measuring these widths typically requires extensive manual work. Computer vision techniques provide promising directions towards the automation of tree ring detection, but most automated methods still require a substantial amount of user interaction to obtain high accuracy. We perform analysis on 3D X-ray CT images of a cross-section of a tree trunk, known as a tree disk. We present novel automated methods for locating the pith (center) of a tree disk, and ring boundaries. Our methods use a combination of standard image processing techniques and tools from topological data analysis. We evaluate the efficacy of our method for two different CT scans by comparing its results to manually located rings and centers and show that it is better than current automatic methods in terms of correctly counting each ring and its location. Our methods have several parameters, which we optimize experimentally by minimizing edit distances to the manually obtained locations.

cs.CV↗

arXiv2019

Homotopy height, grid-major height and graph-drawing height

It is well-known that both the pathwidth and the outer-planarity of a graph can be used to obtain lower bounds on the height of a planar straight-line drawing of a graph. But both bounds fall short for some graphs. In this paper, we consider two other parameters, the (simple) homotopy height and the (simple) grid-major height. We discuss the relationship between them and to the other parameters, and argue that they give lower bounds on the straight-line drawing height that are never worse than the ones obtained from pathwidth and outer-planarity.

cs.CG↗

arXiv2018

SETH Says: Weak Fréchet Distance is Faster, but only if it is Continuous and in One Dimension

We show by reduction from the Orthogonal Vectors problem that algorithms with strongly subquadratic running time cannot approximate the Fréchet distance between curves better than a factor $3$ unless SETH fails. We show that similar reductions cannot achieve a lower bound with a factor better than $3$. Our lower bound holds for the continuous, the discrete, and the weak discrete Fréchet distance even for curves in one dimension. Interestingly, the continuous weak Fréchet distance behaves differently. Our lower bound still holds for curves in two dimensions and higher. However, for curves in one dimension, we provide an exact algorithm to compute the weak Fréchet distance in linear time.

cs.CG↗

arXiv2017

On the complexity of optimal homotopies

In this article, we provide new structural results and algorithms for the Homotopy Height problem. In broad terms, this problem quantifies how much a curve on a surface needs to be stretched to sweep continuously between two positions. More precisely, given two homotopic curves $γ_1$ and $γ_2$ on a combinatorial (say, triangulated) surface, we investigate the problem of computing a homotopy between $γ_1$ and $γ_2$ where the length of the longest intermediate curve is minimized. Such optimal homotopies are relevant for a wide range of purposes, from very theoretical questions in quantitative homotopy theory to more practical applications such as similarity measures on meshes and graph searching problems. We prove that Homotopy Height is in the complexity class NP, and the corresponding exponential algorithm is the best one known for this problem. This result builds on a structural theorem on monotonicity of optimal homotopies, which is proved in a companion paper. Then we show that this problem encompasses the Homotopic Fréchet distance problem which we therefore also establish to be in NP, answering a question which has previously been considered in several different settings. We also provide an O(log n)-approximation algorithm for Homotopy Height on surfaces by adapting an earlier algorithm of Har-Peled, Nayyeri, Salvatipour and Sidiropoulos in the planar setting.

cs.CG↗

arXiv2015

Computing the Similarity Between Moving Curves

In this paper we study similarity measures for moving curves which can, for example, model changing coastlines or retreating glacier termini. Points on a moving curve have two parameters, namely the position along the curve as well as time. We therefore focus on similarity measures for surfaces, specifically the Fréchet distance between surfaces. While the Fréchet distance between surfaces is not even known to be computable, we show for variants arising in the context of moving curves that they are polynomial-time solvable or NP-complete depending on the restrictions imposed on how the moving curves are matched. We achieve the polynomial-time solutions by a novel approach for computing a surface in the so-called free-space diagram based on max-flow min-cut duality.

cs.CG↗