arXiv subjects

Tim Vogel

Publications and source records attributed to Tim Vogel.

15 recordsLinked to original sources

arXiv2025

Average-power scalability of multi-cycle terahertz sources based on periodically poled lithium niobate stacks

We demonstrate that narrowband multi-cycle terahertz (MC-THz) sources based on periodically-poled lithium niobate (PPLN) wafer stacks can be driven by high repetition-rate, high energy femtosecond ytterbium-doped lasers. Operating at 10-kHz repetition rate with up to 104 W of pump power on a 10-wafer stack, we measure 26.4 mW of THz average power for a narrowband multi-cycle source. We identify and quantify strong lensing effects causing dramatic beam focusing in 47 wafer stacks which act as a primary limitation in the current configuration, and present mitigation strategies for future scaling. This first study of high average power narrowband multi-cycle THz sources offers a path forward to Watt-level high repetition rate sources using thin lithium niobate plates.

physics.optics↗

arXiv2025

Laser-driven few-cycle Terahertz sources with high average power

Ultrafast laser-driven terahertz sources are gaining in popularity in an increasingly wide range of scientific and technological applications. However, many fields continue to be severely limited by the typically low average power of these sources, which restricts speed, signal-to-noise ratio, and dynamic range in numerous measurements. Conversely, the past two decades have seen spectacular progress in high average power ultrafast laser technology based on Ytterbium lasers, rendering hundreds of watts to kilowatts of average power available to this community to drive THz sources. This has opened the young field of high-average-power laserdriven THz time-domain spectroscopy, which holds the potential to revolutionize the applications of THz time-domain systems. In this perspective article, we discuss this young field and emphasize recent advancements in broadband terahertz sources utilizing high-power Yb-based ultrafast lasers as drivers, which are nearing watt-level average power. We discuss various approaches explored thus far, current challenges, prospects for scaling, and future research areas that will accelerate their implementation in applications.

physics.optics↗

arXiv2024

High-Dynamic Range Broadband Terahertz Time-Domain Spectrometer Based on Organic Crystal MNA

We present a high power and broadband THz-TDS setup utilizing the nonlinear organic crystal MNA both as emitter and detector. The THz source is based on optical rectification of near infra-red laser pulses at a central wavelength of 1036 nm from a commercial, high-power Yb-based laser system and reaches a high THz average power of 11 mW at a repetition rate of 100 kHz and a broad and smooth bandwidth of more than 9 THz. The conversion efficiency is high (0.13%) in spite of the high excitation average power of 8 W. We validate the high dynamic range and reliability of the source for applications in linear spectroscopy by measuring the broadband THz properties of chi(2) nonlinear crystals up to 8 THz. This new high-repetition rate source is very promising for ultra-broadband THz spectroscopy at high dynamic range and/or reduced measurement times.

physics.optics↗

arXiv2024

Advanced Data Processing of THz-Time Domain Spectroscopy Data with Sinusoidally Moving Delay Lines

We provide a comprehensive technical analysis of the data acquisition process with oscillating delay lines for Terahertz-time domain spectroscopy. The utilization of these rapid stages, particularly in high-repetition-rate systems, is known to enable an effective reduction of noise content through averaging. However, caution must be exercised to optimize the data averaging process, with the goal of significantly optimizing the dynamic range (DR) and signal-to-noise ratio (SNR). Here we discuss some pitfalls to avoid and the effect of improper data handling on the dynamic range obtainable. A free and open-source program, called parrot (Processing All Rapidly & Reliably Obtained THz-traces), is provided alongside this publication to overcome the discussed pitfalls and facilitate the acceleration of experimental setups and data analysis, thereby enhancing signal fidelity and reproducibility.

physics.optics↗

arXiv2024

Single-cycle, 643-mW average power THz source based on tilted pulse front in lithium niobate

We present, to the best of our knowledge, the highest average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the titled pulse-front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk Yb-amplifier. We study repetition rate dependent effects in our setup at 100 kHz and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and is thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times. The presented result is a first benchmark for high average power THz time domain spectroscopy systems for nonlinear spectroscopy, driven by very high average power ultrafast Yb lasers.

physics.optics↗

arXiv2024

Microstructured large-area photoconductive terahertz emitters driven at high average power

Emitters based on photoconductive materials excited by ultrafast lasers are well established and popular devices for THz generation. However, so far, these emitters, both photoconductive antennas and large area emitters, were mostly explored using driving lasers with moderate average powers (either fiber lasers with up to hundreds of milliwatts or Ti:Sapphire systems up to few watts). In this paper, we explore the use of high power, MHz repetition rate Ytterbium (Yb) based oscillator for THz emission using a microstructured large area photoconductive emitter, consist of semi insulating GaAs with a 10 by 10 mm2 active area. As a driving source, we use a frequency doubled home built high average power ultrafast Yb oscillator, delivering 22 W of average power, 115 fs pulses with 91 MHz repetition rate at a central wavelength of 516 nm. When applying 9 W of average power (after an optical chopper with a duty cycle of 50 percent) on the structure without optimized heatsinking, we obtain 65 uW THz average power, 4 THz bandwidth; furthermore, we safely apply up to 18 W of power on the structure without observing damage. We investigate the impact of excitation power, bias voltage, optical fluence, and their interplay on the emitter performance and explore in detail the sources of thermal load originating from electrical and optical power. Optical power is found to have a more critical impact on LAE saturation than electrical power, thus optimized heatsinking will allow us to improve the conversion efficiency in the near future towards much higher emitter power. This work paves the way towards achieving hundreds of MHz or even GHz repetition rates, high power THz sources based on photoconductive emitters, that are of great interest for example for future THz imaging applications.

physics.optics↗

arXiv2023

High-power intracavity single-cycle THz pulse generation using thin lithium niobate

Ultrafast laser driven, single-cycle THz pulsed sources hold immense potential for scientific and industrial applications; however, their limited average power hinders their widespread application. In particular, applications where high repetition rates in the multi-MHz region and beyond are required are more severely affected, due to the lower pulse energies available for frequency conversion. In this respect, resonant enhancement both in passive and active resonators is a well-known technique for boosting the efficiency of nonlinear frequency conversion; however, this route has remained poorly explored for the generation of broadband THz pulses due to the inadequacy of typically employed nonlinear crystals. Here, we demonstrate that thin lithium niobate crystals used intracavity of multimode diode-pumped mode-locked thin-disk lasers are a promising platform to circumvent these difficulties. Using a 50-{\mu}m thin lithium niobate plate intracavity of a compact high-power mode-locked thin-disk laser, we generate milliwatt-level broadband THz pulses with a spectrum extending up to 3 THz at 44.8 MHz repetition rate, driven by 264 W of intracavity average power. This approach opens the door to efficient high-power single-cycle THz generation using affordable nonlinear crystals at very high repetition rates, scalable to kilowatt-level driving power with low cost and complexity.

physics.optics↗

arXiv2023

Towards Intense Ultra-Broadband High Repetition Rate Terahertz Sources Based on Organic Crystals [Invited]

Increasing the average power of broadband, few-cycle terahertz (THz) sources is currently a topic of intense investigation, fueled by recent immense progress in high average power femtosecond laser driving sources at 1030 nm. However, many crucial applications would benefit not only from an increase in average power, but also from ultra-broad bandwidth, while maintaining high dynamic range at these frequencies. This calls for the challenging combination of high repetition rates and high average power simultaneously. Here, we discuss the recent progress in the promising approach enabled by organic crystals for THz-generation. Specifically, this review article discusses advances with the most commonly used organic crystals BNA, DAST, DSTMS, OH1 and HMQ-TMS. We place special emphasis on nonlinear and thermal properties and discuss future directions for this field.

physics.optics↗

arXiv2023

Photoconductive receivers at 1030 nm for high average power pulsed THz detection

In the last few years, many advances have been made in the demonstration of high-average power pulsed THz sources; however, little effort has been made to study compatible sensitive field-resolved detectors. Here, we investigate ErAs:InAlGaAs photoconductive receivers optimized for a probe wavelength of 1030 nm and thus suitable for the new class of high-power ultrafast Ytterbium-based laser sources for THz generation and detection. The performance of the receiver is tested with a few-cycle THz source with high average power up to 20 mW and the dynamic range and saturation behavior of the receiver is thoroughly characterized. Under optimized settings, a dynamic range of more than 115 dB is reached in a 120 s measurement time with 20 mW of THz average power, which is among the highest reported values to date. By reviewing the state-of-the art in TDS measurement and post-processing technology, we identify current limitations and guidelines for further increasing the dynamic range towards 150 dB in short measurement times using high average power THz systems.

physics.optics↗

arXiv2023

Temperature-Dependent THz Properties and Emission of Organic Crystal BNA

As high-average power ultrafast lasers become increasingly available for nonlinear conversion, the temperature dependence of the material properties of nonlinear crystals becomes increasingly relevant. Here, we present temperature-dependent THz complex refractive index measurements of the organic crystal BNA over a wide range of temperatures from 300 K down to 80 K for THz frequencies up to 4 THz for the first time. Our measurements show that whereas the temperature-dependent refractive index has only minor deviation from room temperature values, the temperature-dependent absorption coefficient decreases at low temperature. We additionally compare these measurements with conversion efficiency and spectra observed during THz generation experiments in the same temperature range and using the same crystal, using an ultrafast Yb-laser for excitation. Surprisingly, the damage threshold of the material does not improve significantly upon cooling, pointing to a nonlinear absorption mechanism being responsible for damage. However, we observe a significant increase in THz yield at lower temperatures, which is most likely due to the reduced THz absorption. These findings will be useful for future designs of high average power pumped organic-crystal based THz-TDS systems.

physics.optics↗

arXiv2022

Spectral broadening of 2 mJ femtosecond pulses in a compact air-filled convex-concave multi-pass cell

Multi-pass cell (MPC) based temporal pulse compressors have emerged in the last years as a powerful and versatile solution to the intrinsic issue of long pulses from Yb-based high-power ultrafast lasers. However, the spectral broadening of high-energy (typically more than 100 uJ) pulses has only been realized in complex setups, i.e., in large and costly, pressure-controlled vacuum chambers to avoid strong focusing, ionization, and damage on the mirrors. Here, we present spectral broadening of 2 mJ pulses in a simple and compact (60 cm long) multi-pass cell operated in ambient air. Instead of the traditional Herriott cell with concave-concave (CC/CC) mirrors, we use a convex-concave (CX/CC) design, where the beam stays large at all times allowing both to minimize damage and operate in ambient air. We demonstrate spectral broadening of 2.1 mJ pulses at 100 kHz repetition rate (200 W of average power) from 2.1 nm (pulse duration of 670 fs) to a spectral bandwidth of 24.5 nm, supporting 133 fs pulses with 96% transmission efficiency. We show the compressibility of these pulses down to 134 fs, and verify that the spectral homogeneity of the beam is similar to previously reported CC/CC designs. To the best of our knowledge, this is the first report of a CX/CC MPC compressor, operated at high pulse energies in air. Because of its simplicity, small footprint and low cost, we believe this demonstration will have significant impact in the ultrafast laser community.

physics.optics↗

arXiv2022

Broadband THz-TDS with 5.6 mW average power at 540 kHz using organic crystal BNA

We demonstrate efficient optical rectification in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline), driven by a temporally compressed, commercially available industrial Yb-laser system operating at 540 kHz repetition rate. Our THz source reaches 5.6 mW of THz average power driven by 4.7 W, 45 fs pulses and the resulting THz-TDS combines a very broad bandwidth of 7.5 THz and a high dynamic range of 75 dB (in a measurement time of 70 s). The conversion efficiency at maximum THz power is 0.12%. To the best of our knowledge, this is the highest THz power so far demonstrated with BNA, achieved at a high repetition rate, and enabling to demonstrate a unique combination of bandwidth and dynamic range for THz-spectroscopy applications.

physics.optics↗

arXiv2021

Average power scaling of THz spintronic emitters in reflection geometry

Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W at 400 kHz repetition rate, temporally compressed to a pulse duration of 27 fs. We confirm that the reflection geometry with back-side cooling is ideally suited for these emitters in the high-average-power excitation regime. In order to understand limiting mechanisms, we disentangle the effects on THz power generation by average power and pulse energy, by varying the repetition rate of the laser. Our results show that the conversion efficiency remains mostly dependent on the incident fluence in this high-average-power, high-repetition-rate excitation regime if the emitters are efficiently cooled. Using these findings, we optimize the conversion efficiency to reach 5e-6 at highest excitation powers in the back-cooled reflection geometry. Our findings provide guidelines for scaling the power of THz radiation emitted by spintronic emitters to the mW-level by using state-of-the-art femtosecond sources with multi-hundred-Watt average power to reach ultra-broadband, strong-field THz sources with high repetition rate.

physics.optics↗

arXiv2021

Milliwatt average power, MHz-repetition rate, broadband THz generation in organic crystal BNA with diamond substrate

We demonstrate a 13.3 MHz repetition rate, broadband THz source with milliwatt-average power, obtained by collinear optical rectification of a high-power Yb-doped thin-disk laser in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline). Our source reaches a maximum THz average power of 0.95 mW with an optical-to-THz efficiency of 4e-4 and a spectral bandwidth spanning up to 6 THz at -50 dB, driven by 2.4 W average power (after an optical chopper with duty cycle of 10%), 85 fs-pulses. This high average power excitation was possible without damaging the crystal by using a diamond-heatsinked crystal with significantly improved thermal properties. To the best of our knowledge, this result represents the highest THz average power reported so far using the commercially available organic crystal BNA, showing the potential of these crystals for high average power, high repetition rate femtosecond excitation. The combination of high power, high dynamic range, high repetition rate and broadband spectrum makes the demonstrated THz source highly attractive to improve various time-domain spectroscopy applications. Furthermore, we present a first exploration of the thermal behavior of BNA in this excitation regime, showing that thermal effects are the main limitation in average power scaling in these crystals.

physics.optics↗

arXiv2020

Single-cycle, MHz-repetition rate THz source with 66 mW of average power

We demonstrate THz generation using the tilted pulse front method in Lithium Niobate, driven at unprecedented high average power of more than 100 W and at 13.3 MHz repetition rate, provided by a compact amplifier-free modelocked thin-disk oscillator. The conversion efficiency was optimized with respect to pump spot size and pump pulse duration, enabling us to generate a maximum THz average power of 66 mW, which is the highest reported to date from a laser-driven, few-cycle THz source. Furthermore, we identify beam walk-off as the main obstacle that currently limits the conversion efficiency in this excitation regime (with moderate pulse energies and small spot sizes). Further upscaling to the watt level and beyond is within reach, paving the way for linear and nonlinear high-average power THz spectroscopy experiments with exceptional signal-to-noise ratio at MHz repetition rates.

physics.optics↗