arXiv subjects

Timm Mörstedt

Publications and source records attributed to Timm Mörstedt.

8 recordsLinked to original sources

arXiv2026

Initial demonstration of a quantum heat engine based on dissipation-engineered superconducting circuits

Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.

quant-ph↗

arXiv2025

Multiplexed readout of Superconductor--Normal-Conductor--Superconductor bolometers

Recently, ultrasensitive calorimeters have been proposed as a resource-efficient solution for multiplexed qubit readout in superconducting large-scale quantum processors. However, experiments demonstrating frequency multiplexing of these superconductor--normal--conductor--superconductor (SNS) sensors are are lacking in the literature. To this end, we present the design, fabrication, and operation of three SNS sensors with frequency-multiplexed input and probe circuits, all on a single chip. These devices have their probe frequencies in the range 150 MHz--200 MHz, which is well detuned from the heater frequencies of 4.4 GHz--7.6 GHz compatible with typical readout frequencies of superconducting qubits. Importantly, we show on-demand triggering of both individual and multiple low-noise SNS bolometers with very low cross talk. These experiments pave the way for multiplexed bolometric characterization and calorimetric readout of multiple qubits, a promising step in minimizing related resources such as the number of readout lines and microwave isolators in large-scale superconducting quantum computers.

quant-ph↗

arXiv2024

Noise-induced quantum-circuit refrigeration

We use a transmon qubit and its dispersively coupled readout resonator to measure the Fock state populations of another microwave resonator, to which we have attached a quantum-circuit refrigerator (QCR). First, we apply noise generated at room temperature to the resonator and show that such noise drive leads to a thermal distribution of the resonator Fock states. Subsequently, we detune the noise frequency band far away from the resonance condition and vary the power of the noise applied on the QCR. We observe that such artificial thermal noise may lead to major damping of a coherent state of the resonator. Importantly, we also demonstrate that the effective temperature of a thermal resonator state can be reduced from roughly 300 mK to 130 mK by the introduction of the artificial thermal noise. These observations pave the way for a purely thermally powered quantum-circuit refrigerator which may unlock the use of waste heat in resetting superconducting qubits in a quantum processor and in building autonomous quantum heat engines.

quant-ph↗

arXiv2024

Many-excitation removal of a transmon qubit using a single-junction quantum-circuit refrigerator and a two-tone microwave drive

Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit. The QCR is indirectly coupled to the transmon through a resonator in the dispersive regime, constituting a carefully engineered environmental spectrum for the transmon. Using single-shot readout, we observe excitation stabilization times down to roughly $500$ ns, a $20$-fold speedup with QCR and a simultaneous two-tone drive addressing the $e$-$f$ and $f0$-$g1$ transitions of the system. Our results are obtained at a $48$-mK fridge temperature and without postselection, fully capturing the advantage of the protocol for the short-time dynamics and the drive-induced detrimental asymptotic behavior in the presence of relatively hot other baths of the transmon. We validate our results with a detailed Liouvillian model truncated up to the three-excitation subspace, from which we estimate the performance of the protocol in optimized scenarios, such as cold transmon baths and fine-tuned driving frequencies. These results pave the way for optimized reset of quantum-electric devices using engineered environments and for dissipation-engineered state preparation.

quant-ph↗

arXiv2023

Exceptional-point-assisted entanglement, squeezing, and reset in a chain of three superconducting resonators

The interplay between coherent and dissipative dynamics required in various control protocols of quantum technology has motivated studies of open-system degeneracies, referred to as exceptional points (EPs). Here, we introduce a scheme for fast quantum-state synthesis using exceptional-point engineering in a lossy chain of three superconducting resonators. We theoretically find that the rich physics of EPs can be used to identify regions in the parameter space that favor a fast and quasi-stable transfer of squeezing and entanglement, or a fast reset of the system. For weakly interacting resonators with the coupling strength $g$, the obtained quasi-stabilization time scales are identified as $1/(2\sqrt{2}g)$, and reset infidelities below $10^{-5}$ are obtained with a waiting time of roughly $6/g$ in the case of weakly squeezed resonators. Our results shed light on the role of EPs in multimode Gaussian systems and pave the way for optimized distribution of squeezing and entanglement between different nodes of a photonic network using dissipation as a resource.

quant-ph↗

arXiv2023

Quantum-circuit refrigeration of a superconducting microwave resonator well below a single quantum

We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable low-temperature environment for a superconducting 4.7-GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9-GHz continuous and 10-ns-pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits.

quant-ph↗

arXiv2023

Compact inductor-capacitor resonators at sub-gigahertz frequencies

Compact inductor-capacitor (LC) resonators, in contrast to coplanar waveguide (CPW) resonators, have a simple lumped-element circuit representation but usually call for sophisticated finite-element method (FEM) simulations for an accurate modelling. Here we present an simple analytical model for a family of coplanar LC resonators where the electrical properties are directly obtained from the circuit geometry with a satisfying accuracy. Our experimental results on $10$ high-internal-quality-factor resonators ($Q_{\rm i}\gtrsim 2\times 10^{5}$), with frequency ranging roughly from $300\,{\rm MHz}$ to $1\,{\rm GHz}$, show an excellent consistency with both the derived analytical model and detailed FEM simulations. These results showcase the ability to design sub-gigahertz resonators with less than $2\%$ deviation in the resonance frequency, which has immediate applications, for example, in the implementation of ultrasensitive cryogenic detectors. The achieved compact resonator size of the order of a square millimeter indicates a feasible way to integrate hundreds of microwave resonators on a single chip for realizing photonic lattices.

physics.app-ph↗

arXiv2020

Fully in-situ InAs nanowire Josephson junctions by selective-area growth and shadow evaporation

Josephson junctions based on InAs semiconducting nanowires and Nb superconducting electrodes are fabricated in-situ by a special shadow evaporation scheme for the superconductor electrode. Compared to other metallic superconductors such as Al, Nb has the advantage of a larger superconducting gap which allows operation at higher temperatures and magnetic fields. Our junctions are fabricated by shadow evaporation of Nb on pairs of InAs nanowires grown selectively on two adjacent tilted Si (111) facets and crossing each other at a small distance. The upper wire relative to the deposition source acts as a shadow mask determining the gap of the superconducting electrodes on the lower nanowire. Electron microscopy measurements show that the fully in-situ fabrication method gives a clean InAs/Nb interface. A clear Josephson supercurrent is observed in the current-voltage characteristics, which can be controlled by a bottom gate. The excess current of 0.68 indicates a high junction transparency. Under microwave radiation, pronounced integer Shapiro steps are observed suggesting a sinusoidal current-phase relation. Owing to the large critical field of Nb, the Josephson supercurrent can be maintained to magnetic fields exceeding 1 T. Our results show that in-situ prepared Nb/InAs nanowire contacts are very interesting candidates for superconducting quantum circuits requiring large magnetic fields.

cond-mat.supr-con↗