arXiv subjects

Timo Aalto

Publications and source records attributed to Timo Aalto.

9 recordsLinked to original sources

arXiv2026

Rf beam steering using on-ohip optical true time delay on 3 micrometer siliocn on insulator platfrom

We present the design, packaging, and system-level experimental demonstration of a reconfigurable 5-bit, 4-channel optical true time delay (OTTD) chip realized on a 3 micrometer thick silicon on insulator (SOI) platform at VTT. The chip enables 32 discrete delay states over a 0 to 101 picoseconds range, with a delay resolution of 3.25 picoseconds, making it well suited for broadband RF beamforming with upcoming 6G FR3 band systems around 10 GHz. Each channel incorporates five binary weighted delay stages controlled by Mach-Zehnder interferometer (MZI) based thermo-optic switches with an extinction ratio exceeding 25 decibels and an average switching power of 25 milliwatts. The chip is embedded within an analog radio-over-fibre (A-RoF) link, and the outputs are connected to a PCB-based four-element patch antenna array. Accurate RF beam steering is demonstrated at broadside and at 30 degrees from broadside using a 16 - QAM signal modulated at 100 MBaud on a 10 GHz carrier. An error vector magnitude (EVM) degradation of approximately 1 percent is observed upon steering, and an extinction ratio exceeding 50 decibels is measured between the two receiver positions. The results confirm the potential of integrated OTTD technology for compact, power-efficient, and broadband beamforming in next-generation wireless and radar systems.

physics.optics↗

arXiv2024

Stimulated Brillouin scattering in a non-suspended ultra-low-loss thick-SOI platform

Silicon photonics, with its CMOS compatibility and high integration density, has enabled a wide range of novel applications. Harnessing stimulated Brillouin scattering (SBS), an optomechanic interaction between optical and GHz acoustic waves, in silicon-on-insulator (SOI) platforms attracts great interests for its potential in narrow-linewidth lasers and microwave photonics. However, the poor optoacoustic overlap in silicon nanowires on conventional SOI platforms has previously restricted the observation of SBS signals to suspended silicon waveguide structures. In this work, we report, for the first time, the SBS response in a non-suspended ultra-low-loss thick-SOI waveguide platform. The SBS process in this 3~$\mu$m thick SOI platform is enabled by a leaky acoustic mode that coexists with the optical mode in the waveguide core, resulting in enhanced optoacoustic overlap. We measured a Brillouin gain coefficient of 2.5 m$^{-1}$W$^{-1}$ and 1.9 m$^{-1}$W$^{-1}$ at 37.6 GHz for the rib and strip waveguide, respectively. This work paves the way for Brillouin-based applications in non-suspended ultra-low-loss silicon photonics systems.

physics.optics↗

arXiv2024

InP optical amplifiers with Euler U-bend waveguide geometry for low-loss flip-chip hybrid integration

We report on the development of InP-based semiconductor amplifiers with a U-bend waveguide geometry having the input and output ports on one facet only. This waveguide geometry simplifies the chip alignment during the hybrid integration on silicon photonics platforms ultimately reducing the coupling losses, improving the integration yield, and minimizing the length of the optoelectronic chip. To achieve low loss U-bends with small footprint, we utilize the Euler bend geometry previously demonstrated on silicon and GaAs platforms. We analyze the gain properties of the devices by operating them as laser diodes at room temperature. Low loss U-bend performance with a 0.56 dB for a 50 $\mu$m effective bending radius bend in a single-mode strip InP waveguide is demonstrated. The interface between bend and straight waveguides was studied by comparing deep etched waveguides to a combination of shallow straight waveguides and deep etched bends. The effects of this interface on the device losses, electric properties and spectrum are reported. The implications related to having a bend section on the carrier injection and gain are discussed. Finally, results on the integration trials on silicon-on-insulator platform are presented.

physics.app-ph↗

arXiv2023

Second order add/drop filter with a single ring resonator

We show theoretically and experimentally how a flat-top second-order response can be achieved with a self-coupled single add-drop ring resonator based on two couplers with different splitting ratios. The resulting device is a 1x1 filter, reflecting light back in the input waveguide at resonating wavelengths in the passbands, and transmitting light in the output waveguide at all other non-resonating wavelengths. Different implementations of the filter have been designed and fabricated on a micron-scale silicon photonics platform. They are based on compact Euler bends - either U-bends or L-bends - and Multi-Mode Interferometers as splitters for the ring resonators. Different finesse values have been achieved by using either 50:50 MMIs in conjunction with 85:15 MMIs or 85:15 MMIs in conjunction with 95:05 double MMIs. Unlike ordinary lowest order directional couplers, the MMIs couple most of the power in the cross-port which make them particularly suitable for the topology of the self-coupled ring, which would otherwise require a waveguide crossing. Experimental results are presented, showing good agreement with simulations. The proposed devices can find applications as wavelength-selective reflectors for relatively broad-band lasers or used as 2x2 add-drop filters when two exact replicas of the device are placed on the arms of a Mach-Zehnder interferometer.

physics.optics↗

arXiv2023

Tapered MMI splitters with unconstrained splitting ratio on a thick SOI platform

We have systematically studied multimode interferometer (MMI) splitters made from multiple tapered sections. The goal is to create a library of robust and low-loss splitters covering all splitting ratios (SR) for our silicon photonics platform based on 3 $\mu$m thick waveguides. The starting point is always a non-tapered canonical MMI either with general symmetry (canonical SRs 50:50, 100:0, and reciprocal ratios), with mirror symmetric restricted symmetry (canonical SRs 85:15, 50:50, 100:0, and reciprocal ratios), and with point-symmetric restricted symmetry (canonical SRs 72:28 and 28:72). Splitters of these three types are then divided into one to four subsections of equal length, leading to 12 possible different configurations. In each of these subsections, the width is first linearly tapered either up or down and then tapered back to its starting value ensuring mirror symmetry. For all twelve configurations, we carried out an extensive campaign of numerical simulations. For each given width change, we scanned the splitter length and calculated the power in the fundamental mode at the output as well as its relative phase. We then selected the designs with sufficiently low loss and mapped their SR as a function of either the change in width change or length, therefore creating systematic maps for the design of MMI splitters with any SR. Eventually, we selected and fabricated a subset of designs with SRs ranging from 5:95 to 95:5 in steps of 5% and validated their operation through optical measurements.

physics.optics↗

arXiv2022

Supporting quantum technologies with an ultra-low loss silicon photonics platform

Photonic integrated circuits (PICs) are expected to play a significant role in the ongoing second quantum revolution, thanks to their stability and scalability. Still, major upgrades are needed for available PIC platforms to meet the demanding requirements of quantum devices. In this paper, we present a review of our recent progress in upgrading an unconventional silicon photonics platform towards such goal, including ultra-low propagation losses, low fibre coupling losses, integration of superconducting elements, Faraday rotators, fast and efficient detectors, as well as phase modulators with low loss and/or low energy consumption. We show the relevance of our developments and of our vision in two main applications: quantum key distribution - to achieve significantly higher key rates and large-scale deployment - and cryogenic quantum computers - to replace electrical connections to the cryostat with optical fibres.

physics.optics↗

arXiv2020

Flat-top interleavers based on single MMIs

We demonstrate for the first time flat-top interleavers based on cascaded Mach-Zehnder interferometers (MZIs) which use only single multimode interferometers (MMIs) as power splitters. Our previous designs were based on 4-stage cascades of MZIs, where we used single MMIs and double MMIs to achieve 85:15 splitting ratio and 31:69 splitting ratio respectively. This time, we propose instead a greatly simplified 2-stage configuration using only single MMIs, including a standard 50:50 MMI, and two tapered MMIs to achieve 71:29 and 92:08 splitting ratios. We have designed the interleaver based on its geometrical representation on the Bloch sphere, then confirmed by efficient 2D simulations of the building blocks and of the whole structure, based on the eigenmode expansion method. We show how important is to take into account the phase relations between the outputs of all MMIs in order to make a working design. We have successfully fabricated devices with different channel spacing on our micron-scale silicon photonics platform, and measurement results confirmed their expected flat-top operation on a broad band. Using only single MMI splitters we can not only greatly outperform the bandwidth achieved by standard directional couplers, but we can also ensure much higher robustness to fabrication errors, also compared to previous demonstrations based on double MMIs. Indeed, when compared to those previous attempts, the new results prove tapered MMIs to be the most robust approach to achieve arbitrary splitting ratios.

physics.optics↗

arXiv2015

Low-error and broadband microwave frequency measurement in a silicon chip

Instantaneous frequency measurement (IFM) of microwave signals is a fundamental functionality for applications ranging from electronic warfare to biomedical technology. Photonic techniques, and nonlinear optical interactions in particular, have the potential to broaden the frequency measurement range beyond the limits of electronic IFM systems. The key lies in efficiently harnessing optical mixing in an integrated nonlinear platform, with low losses. In this work, we exploit the low loss of a 35 cm long, thick silicon waveguide, to efficiently harness Kerr nonlinearity, and demonstrate the first on-chip four-wave mixing (FWM) based IFM system. We achieve a large 40 GHz measurement bandwidth and record-low measurement error. Finally, we discuss the future prospect of integrating the whole IFM system on a silicon chip to enable the first reconfigurable, broadband IFM receiver with low-latency.

physics.optics↗

arXiv2013

New silicon photonics integration platform enabled by novel micron-scale bends

Even though submicron silicon waveguides have been proposed for dense integration of photonic devices, to date the lightwave circuits on the market mainly rely on waveguides with micron-scale core dimensions. These larger waveguides feature easier fabrication, higher reliability and better interfacing to optical fibres. Single-mode operation with large core dimensions is obtained with low lateral refractive index contrast. Hence, the main limitation in increasing the level of integration and in reducing the cost of micron-scale waveguide circuits is their mm- to cm-scale minimum bending radius. Fortunately, single-mode rib waveguides with a micron-scale silicon core can be locally transformed into multi-mode strip waveguides that have very high lateral index contrast. Here we show how Euler spiral bends realized with these waveguides can have bending radii below 10 μm and losses below 0.02 dB/90° for the fundamental mode, paving way for a novel densely integrated platform based on micron-scale waveguides.

physics.optics↗