arXiv subjects

Timothy A. Strobel

Publications and source records attributed to Timothy A. Strobel.

14 recordsLinked to original sources

arXiv2026

Pressure-induced Superconductivity in AgSbTe2

AgSbTe2 is a well-known thermoelectric material with a high Seebeck coefficient and intrinsically low thermal conductivity, but its behavior under pressure remains largely unexplored. Here we report a systematic investigation of the structural, electronic, and transport properties of non-stoichiometric AgSbTe2 under high pressure. At ambient pressure, the material can be described as having a cubic crystal structure that remains stable up to 21.7 GPa beyond which it loses long-range structural order, while its crystal system fully recovers upon decompression. Remarkably, superconductivity emerges at a very low pressure of 0.38 GPa with an onset superconducting critical temperature (Tc) of 3.2 K. Tc increases with increasing pressure, reaching 6.9 K at 31.9 GPa, and peaks at 7.4 K during decompression. Magnetic-field-dependent transport measurements and electronic structure calculations reveal an evolution of the superconducting state driven by an enhanced electronic density of states at the Fermi level under compression. Our findings uncover pressure-induced superconductivity in AgSbTe2 and demonstrate that pressure can effectively tune the electronic ground state of thermoelectric materials, extending their functionality beyond thermoelectric energy conversion.

cond-mat.supr-con↗

arXiv2026

High-pressure stabilization of Mg2IrH7: Structural proximity to high-Tc superconductivity

Mg$_2$IrH$_6$ is a metastable complex metal hydride with a predicted superconducting transition temperature as high as 170 K at ambient pressure. Following the synthesis of isomorphic, insulating Mg$_2$IrH$_5$ at low pressure, higher-pressure studies were conducted to investigate the phase behavior and compound formation in this system. X-ray diffraction and Raman spectroscopic measurements indicate that cubic Mg$_2$IrH$_7$ is stabilized above ca. 40 GPa and coexists with a related hexagonal hydride with likely composition near Mg$_2$IrH$_5$. Electrical transport measurements show that the cubic Mg$_2$IrH$_7$ is insulating, in agreement with ab initio predictions, and persists during room-temperature decompression until $\sim$20 GPa before reverting back to the cubic Mg$_2$IrH$_5$. The experimental results confirm ground-state structure predictions in the Mg-Ir-H system, and the formation of two nearly identical phases with surrounding compositions opens new opportunities to access superconducting Mg$_2$IrH$_6$ through non-equilibrium processing pathways.

cond-mat.supr-con↗

arXiv2026

Inverse Isotope Effect in the Ternary Perovskite Hydride SrPdH/D$_{2.9}$: A Signature of Quantum Zero-Point Fluctuations

Guided by first-principles calculations, we demonstrate superconductivity in the ternary perovskite hydride SrPdH$_{3-x}$, synthesized at low pressure. Structural characterization via neutron diffraction reveals the near-stoichiometric composition SrPdD$_{2.9(2)}$ with 96\% deuterium site occupancy. Subsequent transport and magnetic susceptibility measurements establish onset superconducting transitions at $T_\text{c} = \SI{2.1}{K} $ (H) and $T_\text{c} = \SI{2.2}{K} $ (D), exhibiting an inverse isotope effect that our first-principles calculations attribute predominantly to quantum zero-point motion. The excellent agreement between theory and experiment with respect to thermodynamic stability and superconducting properties provides important validation for theory-guided superconductor discovery. This work establishes superconductivity in the perovskite hydride structural prototype -- expanding the limited family of experimentally realized ternary hydride superconductors -- and demonstrates the importance of quantum nuclear motion on the accurate theoretical treatment of low-pressure hydride superconductors.

cond-mat.supr-con↗

arXiv2025

Prediction and Synthesis of Mg$_4$Pt$_3$H$_6$: A Metallic Complex Transition Metal Hydride Stabilized at Ambient Pressure

The low-pressure stabilization of superconducting hydrides with high critical temperatures ($T_c$s) remains a significant challenge, and experimentally verified superconducting hydrides are generally constrained to a limited number of structural prototypes. Ternary transition-metal complex hydrides (hydrido complexes)-typically regarded as hydrogen storage materials-exhibit a large range of compounds stabilized at low pressure with recent predictions for high-$T_c$ superconductivity. Motivated by this class of materials, we investigated complex hydride formation in the Mg-Pt-H system, which has no known ternary hydride compounds. Guided by ab initio structural predictions, we successfully synthesized a novel complex transition-metal hydride, Mg$_4$Pt$_3$H$_6$, using laser-heated diamond anvil cells. The compound forms in a body-centered cubic structural prototype at moderate pressures between 8-25 GPa. Unlike the majority of known hydrido complexes, Mg$_4$Pt$_3$H$_6$ is metallic, with formal charge described as 4[Mg]$^{2+}$.3[PtH$_2$]$^{2-}$. X-ray diffraction (XRD) measurements obtained during decompression reveal that Mg$_4$Pt$_3$H$_6$ remains stable upon quenching to ambient conditions. Magnetic-field and temperature-dependent electrical transport measurements indicate ambient-pressure superconductivity with $T_c$ (50%) = 2.9 K, in reasonable agreement with theoretical calculations. These findings clarify the phase behavior in the Mg-Pt-H system and provide valuable insights for transition-metal complex hydrides as a new class of hydrogen-rich superconductors.

cond-mat.supr-con↗

arXiv2025

A Piezoelectric Molecular Cocrystal with Unconventional $π$-Stacking

We demonstrate the crystallization of a polar octafluoronaphthalene (OFN, \OFN)--phthalazine (Phth, \Phth) cocrystal, formed in a 1:2 ratio by slow evaporation. The crystal structure and vibrational properties of the cocrystal were determined using powder/single-crystal X-ray diffraction (XRD) and Fourier-Transform Infrared (FTIR) spectroscopy, and confirmed with density functional theory (DFT) and density functional perturbation theory (DFPT) calculations. The molecular $π$-stacking of aromatic rings is unconventional compared with other arene--perfluoroarene cocrystals. Phth molecules are offset and misaligned with respect to the major axis of OFN due to electrostatic repulsion between N and F atoms, enabling overall electric polarization attributed to the dipole moment of Phth. Our calculations show that OFN:2Phth is an insulator with a band gap of $\sim$2.4 eV. The electric polarization was calculated to be 7.1 \muC, while the shear piezoelectric coefficient ($d_{34}$) may be as large as 11.4 pC N$^{-1}$.

cond-mat.mtrl-sci↗

arXiv2024

Synthesis of Mg$_2$IrH$_5$: A potential pathway to high-$T_c$ hydride superconductivity at ambient pressure

Following long-standing predictions associated with hydrogen, high-temperature superconductivity has recently been observed in several hydride-based materials. Nevertheless, these high-$T_c$ phases only exist at extremely high pressures, and achieving high transition temperatures at ambient pressure remains a major challenge. Recent predictions of the complex hydride Mg$_{2}$IrH$_{6}$ may help overcome this challenge with calculations of high-$T_c$ superconductivity (65 K$~<~T_c~<~$ 170 K) in a material that is stable at atmospheric pressure. In this work, the synthesis of Mg$_{2}$IrH$_{6}$ was targeted over a broad range of $P$-$T$ conditions, and the resulting products were characterized using X-ray diffraction (XRD) and vibrational spectroscopy, in concert with first-principles calculations. The results indicate that the charge-balanced complex hydride Mg$_{2}$IrH$_{5}$ is more stable over all conditions tested up to ca 28 GPa. The resulting hydride is isostructural with the predicted superconducting Mg$_{2}$IrH$_{6}$ phase except for a single hydrogen vacancy, which shows a favorable replacement barrier upon insertion of hydrogen into the lattice. Bulk Mg$_{2}$IrH$_{5}$ is readily accessible at mild $P$-$T$ conditions and may thus represent a convenient platform to access superconducting Mg$_{2}$IrH$_{6}$ via non-equilibrium processing methods.

cond-mat.supr-con↗

arXiv2024

Feasible route to high-temperature ambient-pressure hydride superconductivity

A key challenge in materials discovery is to find high-temperature superconductors. Hydrogen and hydride materials have long been considered promising materials displaying conventional phonon-mediated superconductivity. However, the high pressures required to stabilize these materials have restricted their application. Here, we present results from high-throughput computation, considering a wide range of high-symmetry ternary hydrides from across the periodic table at ambient pressure. This large composition space is then reduced by considering thermodynamic, dynamic, and magnetic stability, before direct estimations of the superconducting critical temperature. This approach has revealed a metastable ambient-pressure hydride superconductor, Mg$_2$IrH$_6$, with a predicted critical temperature of 160 K, comparable to the highest temperature superconducting cuprates. We propose a synthesis route via a structurally related insulator, Mg$_2$IrH$_7$, which is thermodynamically stable above 15 GPa and discuss the potential challenges in doing so.

cond-mat.supr-con↗

arXiv2022

Conventional high-temperature superconductivity in metallic, covalently bonded, binary-guest C-B clathrates

Inspired by the synthesis of XB3C3 (X= Sr, La) compounds in the bipartite sodalite clathrate structure, density functional theory (DFT) calculations are performed on members of this family containing up to two different metal atoms. A DFT-chemical pressure analysis on systems with X= Mg, Ca, Sr, Ba reveals that the size of the metal cation, which can be tuned to stabilize the B-C framework, is key for their ambient-pressure dynamic stability. High-throughput density functional theory calculations on 105 Pm-3 symmetry XYB6C6 binary-guest compounds (where X, Y are electropositive metal atoms) find 22 that are dynamically stable at 1 atmosphere, expanding the number of potentially synthesizable phases by 19 (18 metals and 1 insulator). The density of states at the Fermi level and superconducting critical temperature, Tc, can be tuned by changing the average oxidation state of the metal atoms, with Tc being highest for an average valence of +1.5. KPbB6C6, with an ambient-pressure Eliashberg Tc of 88 K, is predicted to possess the highest-Tc among the studied Pm-3n XB3C3 or Pm-3 XY B6C6 phases, and calculations suggest it may be synthesized using high-pressure high-temperature techniques then quenched to ambient conditions.

cond-mat.supr-con↗

arXiv2021

Superconductivity in SrB3C3 clathrate

We predict superconductivity for the carbon-boron clathrate SrB3C3 at 27-43 K for Coulomb pseudopotential (mu*) values between 0.17 and 0.10 using first-principles calculations with conventional electron-phonon coupling. Electrical transport measurements, facilitated by a novel in situ experimental design compatible with extreme synthesis conditions (>3000 K at 50 GPa), show non-hysteretic resistivity drops that track the calculated magnitude and pressure dependence of superconductivity for mu*=0.15, and transport measurements collected under applied magnetic fields confirm superconductivity with an onset Tc of approximately 20 K at 40 GPa. Carbon-based clathrates thus represent a new class of superconductors similar to other covalent metals like MgB2 and doped fullerenes. Carbon clathrates share structures similar to superconducting superhydrides, but covalent C-B bonds allow metastable persistence at ambient conditions.

cond-mat.mtrl-sci↗

arXiv2020

Prediction of an Extended Ferroelectric Clathrate

Using first-principles calculations, we predict a lightweight room-temperature ferroelectric carbon-boron framework in a host/guest clathrate structure. This ferroelectric clathrate, with composition ScB$_3$C$_3$, exhibits high polarization density and low mass density compared with widely used commercial ferroelectrics. Molecular dynamics simulations show spontaneous polarization with a moderate above-room-temperature T$_c$ of $\sim$370 K, which implies large susceptibility and possibly large electrocaloric and piezoelectric constants at room temperature. Our findings open the possibility for a new class of ferroelectric materials with potential across a broad range of applications.

cond-mat.mtrl-sci↗

arXiv2019

Phase Transition Pathway Sampling via Swarm Intelligence and Graph Theory

The prediction of reaction pathways for solid-solid transformations remains a key challenge. Here, we develop a pathway sampling method via swarm intelligence and graph theory, and demonstrate that our PALLAS method is an effective tool to help understand phase transformations in solid-state systems. The method is capable of finding low-energy transition pathways between two minima without having to specify any details of transition mechanism a priori. We benchmarked our PALLAS method against known phase transitions in cadmium selenide (CdSe) and silicon (Si). PALLAS readily identifies previously-reported, low-energy phase transition pathways for the wurtzite to rock-salt transition in CdSe and reveals a novel lower-energy pathway that has not yet been observed. In addition, PALLAS provides detailed information that explains the complex phase transition sequence observed during the decompression of Si from high pressure. Given the efficiency to identify low-barrier-energy reaction pathways, the PALLAS methodology represents a promising tool for materials by design with valuable insights for novel synthesis.

cond-mat.mtrl-sci↗

arXiv2017

Interpenetrating Graphene Networks: Three-dimensional Node-line Semimetals with Massive Negative Linear Compressibilities

We investigated the stability and mechanical and electronic properties of fifteen metastable mixed $sp^2$-$sp^3$ carbon allotropes in the family of interpenetrating graphene networks (IGNs) using density functional theory (DFT) within the generalized gradient approximation (GGA). IGN allotropes exhibit non-monotonic bulk and linear compressibilities before their structures irreversibly transform into new configurations under large hydrostatic compression. The maximum bulk compressibilities vary widely between structures and range from 3.6 to 306 TPa$^{-1}$. We find all the IGN allotropes have negative linear compressibilities with maximum values varying from -0.74 to -133 TPa$^{-1}$. The maximal negative linear compressibility of Z33 (-133 TPa$^{-1}$ at 3.4 GPa) exceeds previously reported values at pressures higher than 1.0 GPa. IGN allotropes can be classified as either armchair- or zigzag-type, and these two types of IGNs exhibit different electronic properties. Zigzag-type IGNs are node-line semimetals, while armchair-type IGNs are either semiconductors or node-loop or node-line semimetals. Experimental synthesis of these IGN allotropes might be realized since their formation enthalpies relative to graphite are only 0.1 - 0.5 eV/atom (that of C$_{60}$ fullerene is about 0.4 eV/atom), and energetically feasible binary compound pathways are possible.

cond-mat.mtrl-sci↗

arXiv2016

Structural Diversity in Lithium Carbides

The lithium-carbon binary system possesses a broad range of chemical compounds, which exhibit fascinating chemical bonding characteristics that give rise diverse and technologically important properties. While lithium carbides with various compositions have been studied or suggested previously, the crystal structures of these compounds are far from well understood. In this work we present the first comprehensive survey of all ground state (GS) structures of lithium carbides over a broad range of thermodynamic conditions, using \textit{ab initio} density functional theory (DFT) crystal structure searching methods. Thorough searches were performed for 29 stoichiometries ranging from Li$_{12}$C to LiC$_{12}$ at 0 GPa as well as 40 GPa. Based on formation enthalpies from optimized van der Waals density functional calculations, three thermodynamically stable phases (Li$_4$C$_3$, Li$_2$C$_2$ and LiC$_{12}$) were identified at 0 GPa, and seven thermodynamically stable phases (Li$_8$C, Li$_6$C, Li$_4$C, Li$_8$C$_3$, Li$_2$C, Li$_3$C$_4$, and Li$_2$C$_3$) were predicted at 40 GPa. A rich diversity of carbon bonding, including monomers, dimers, trimers, nanoribbons, sheets and frameworks, was found within these structures, and the dimensionality of carbon connectivity existing within each phase was observed to increase with increasing carbon concentration. Of particular interest, we find that the well-known composition LiC$_6$ is actually a metastable one. We also find a unique coexistence of carbon monomers and dimers within the predicted thermodynamically stable phase Li$_8$C$_3$, and different widths of carbon nanoribbons coexist in a metastable phase of Li$_2$C$_2$ (\textit{Imm}2). Interesting mixed \textit{sp}$^2$-\textit{sp}$^3$ carbon frameworks are predicted in metastable phases with composition LiC$_6$.

cond-mat.mtrl-sci↗

arXiv2015

Exotic stable calcium carbides: theory and experiment

It is well known that pressure causes profound changes in the properties of atoms and chemical bonding, leading to the formation of many unusual materials. Here we systematically explore all stable calcium carbides at pressures from ambient to 100 GPa using variable-composition evolutionary structure predictions. We find that Ca5C2, Ca2C, Ca3C2, CaC, Ca2C3, and CaC2 have stability fields on the phase diagram. Among these, Ca2C and Ca2C3 are successfully synthesized for the first time via high-pressure experiments with excellent structural correspondence to theoretical predictions. Of particular significance are the base-centered monoclinic phase (space group C2/m) of Ca2C, a quasi-two-dimensional metal with layers of negatively charged calcium atoms, and the primitive monoclinic phase (space group P21/c) of CaC with zigzag C4 groups. Interestingly, strong interstitial charge localization is found in the structure of R-3m-Ca5C2 with semimetallic behaviour.

cond-mat.mtrl-sci↗