arXiv subjects

Timur Shaftan

Publications and source records attributed to Timur Shaftan.

9 recordsLinked to original sources

arXiv2026

Design and optimization of the NSLS-II lattice with complex bend replacement

The demand for brighter photon beams has driven the development of diffraction-limited storage rings with ultralow electron beam emittance. A complex bend (CB) lattice was recently proposed as an approach for the future NSLS-II upgrade. As a step toward this upgrade, NSLS-II plans to replace two existing electromagnetic dipoles with permanent-magnet CBs, providing the first experimental demonstration of the CB concept in a storage ring. This paper presents the linear optics design, nonlinear optimization, and machine error evaluation of the modified NSLS-II lattice. The optimized lattice provides sufficient dynamic and momentum apertures for off-axis injection and routine operation and can be corrected with the existing NSLS-II correction scheme. Scraper measurements near the planned CB installation location validate the beam aperture requirements used in the CB design.

physics.acc-ph↗

arXiv2025

Sextupole reduction via chaos suppression at the National Synchrotron Light Source II

We revisit the nonlinear lattice design approach for the National Synchrotron Light Source II (NSLS-II) storage ring. By suppressing chaos, we identify alternative sextupole configurations to the original design, which relied on the conventional strategy of simultaneously minimizing Resonance Driving Terms (RDT) and Amplitude-Dependent Detuning (ADD). These alternatives achieve comparable performance while requiring fewer sextupoles. A detailed comparison of two representative solutions is presented and supported by experimental validation. Our results show that the dynamic aperture correlates more strongly with global chaos than with individual RDTs, and that the importance of minimizing ADD may have been overstated in earlier design strategies.

physics.acc-ph↗

arXiv2025

A simple approach for power density calculation of spontaneous radiation emission from a finite emittance electron beam in planar undulators

We extend the angular power density formulae for spontaneous radiation emission from planar undulators to include finite emittance and angular misalignment of the electron beam. Then we calculate and compare power densities estimated from integral approach with Gaussian beam distribution and summation approach with the macro-particle allocation covering the particle beam phase space. After showing that both approaches converge to each other, we apply the macro-particle approach to study power absorbed and transmitted by various apertures at the front end of the 9-ID beamline at the National Synchrotron Light Source-II. Our analysis indicate that the electron beam misalignment could lead to unwarranted power deposition at tighter apertures that would have been otherwise difficult to account in the aperture design/choice process using the geometric ray-tracing approach.

physics.acc-ph↗

arXiv2024

Online regularization of Poincar\'e map of storage rings with Shannon entropy

Shannon entropy, as a chaos indicator, is used for online Poincar\'e map regularization and dynamic aperture optimization in the National Synchrotron Light Source-II (NSLS-II) ring. Although various chaos indicators are widely used in studying nonlinear dynamical systems, including modern particle accelerators, it is the first time to use a measurable one in a real-world machine for online nonlinear optimization. Poincar\'e maps, constructed with the turn-by-turn beam trajectory readings from beam position monitors, are commonly used to observe the nonlinearity in ring-based accelerators. However, such observations typically only provide a qualitative interpretation. We analyze their entropy to quantify the chaos in measured Poincar\'e maps. After some canonical transformations on the Poincar\'e maps, not only can the commonly used nonlinear characterizations be extracted, but more importantly, the chaos can be quantitatively calibrated with Shannon entropy, and then used as the online optimization objectives.

physics.acc-ph↗

arXiv2024

Electron beam emittance at operational intensity in fourth-generation synchrotron light sources

For synchrotron light sources, the brightness of user X-ray beams is primarily determined by the electron beam emittance and energy spread at operational intensity. A common feature of fourth-generation synchrotrons is the short length of electron bunches combined with a very small transverse beam size. Consequently, the particle density is much higher than in machines of previous generations, leading to strong collective effects that significantly increase the emittance and limit the achievable brightness at operational beam intensity. In this article, we summarize our studies of the emittance scaled with the beam energy and intensity, taking into account the effects of intrabeam scattering, beam-impedance interaction, and bunch lengthening provided by higher-harmonic RF systems, to identify optimal combinations of machine and beam parameters.

physics.acc-ph↗

arXiv2023

Optimize electron beam energy toward in-situ imaging of large thick bio-samples with nanometer resolution

To optimize electron energy toward in-situ imaging large bio-samples up to 10-um thickness with nanoscale resolution, we implemented an analytical model based on elastic and inelastic characteristic angles [1]. This model can be used to predict the transverse beam size broadening as a function of electron energy while the probe beam traverses through the sample. As result, the optimal choice of the electron beam energy can be realized. While the sample thickness is less than 10 um, there exists an optimal electron beam energy below 10 MeV regarding a specific sample thickness. However, for samples thicker than 10 um, the optimal beam energy is 10 MeV, and the ultimate resolution could become worse with the increase of the sample thickness.

physics.app-ph↗

arXiv2023

Design study of a low emittance complex bend achromat lattice

Light sources worldwide have experienced rapid growth in the last decades, pushing towards higher brightness with lower emittance to meet growing demands from the user community. The quest for higher brightness motivates the development of low-emittance ring lattices. At this point, all fourth-generation storage ring light sources employ variations of the Multi-Bend Achromat (MBA) lattice. In this paper, we discuss an extension of this approach, known as Complex Bend\cite{Timur_2018_techreport} Achromat (CBA) lattice in relation to the future NSLS-II upgrade. A detailed approach for the lattice design will be described, and the developed lattice will be presented. The benefits of using a complex bend approach are demonstrated by achieving a small natural emittance of 23 pm at a beam energy of 3 GeV, straight sections of 8.4 m for long IDs acquiring a ratio of about 50\% of the drift space with respect to the ring circumference, compact ring elements (complex bends) based on Permanent Magnets and a large-scale reduction in the number of power supplies. Our new approach provides an extension to the MBA concept for the next-generation light source lattice design.

physics.acc-ph↗

arXiv2023

Feasibility study of a hard x-ray FEL oscillator at 3 to 4 GeV based on harmonic lasing and transverse gradient undulator

We studied the feasibility of a hard x-ray FEL oscillator (XFELO) based on a 3 to 4 GeV storage ring considered for the low-emittance upgrade of NSLS-II. We present a more detailed derivation of a formula for the small-gain gain calculation for 3 GeV XFELO published in the proceedings of IPAC'21 [1]. We modified the small-signal low-gain formula developed by K.J. Kim, et.al. [4{6] so that the gain can be derived without taking the \no focusing approximation" and a strong focusing can be applied. In this formula, the gain is cast in the form of a product of two factors with one of them depending only on the harmonic number, undulator period, and gap. Using this factor, we show that it is favorable to use harmonic lasing to achieve hard x-ray FEL working in the small-signal low-gain regime with the medium-energy electron beam (3-4 GeV). Our formula also allows FEL optimization by varying the vertical gradient of the undulator, the vertical dispersion, and the horizontal and vertical focusing, independently. Since a quite high peak current is required for the FEL, the collective effects of beam dynamics in medium-energy synchrotrons significantly affect the electron beam parameters. We carried out a multiple-parameter optimization taking collective effects into account and the result indicates the XFELO is feasible for storage ring energy as low as 3 GeV, with local correction of betatron coupling.

physics.acc-ph↗

arXiv2021

Cold ion beam in a storage ring as a platform for large-scale quantum computers and simulators: challenges and directions for research and development

The purpose of this paper is to evaluate the possibility of constructing a large-scale storage-ring-type ion-trap system capable of storing, cooling, and controlling a large number of ions as a platform for scalable quantum computing (QC) and quantum simulations (QS). In such a trap, the ions form a crystalline beam moving along a circular path with a constant velocity determined by the frequency and intensity of the cooling lasers. In this paper we consider a large leap forward in terms of the number of qubits, from fewer than 100 available in state-of-the-art linear ion-trap devices today to an order of 105 crystallized ions in the storage-ring setup. This new trap design unifies two different concepts: the storage rings of charged particles and the linear ion traps used for QC and mass spectrometry. In this paper we use the language of particle accelerators to discuss the ion state and dynamics. We outline the differences between the above concepts, analyze challenges of the large ring with a revolving beam of ions, and propose goals for the research and development required to enable future quantum computers with 1000 times more qubits than available today. The challenge of creating such a large-scale quantum system while maintaining the necessary coherence of the qubits and the high fidelity of quantum logic operations is significant. Performing analog quantum simulations may be an achievable initial goal for such a device. Quantum simulations of complex quantum systems will move forward both the fundamental science and the applied research. Nuclear and particle physics, many-body quantum systems, lattice gauge theories, and nuclear structure calculations are just a few examples in which a large-scale quantum simulation system would be a very powerful tool to move forward our understanding of nature.

quant-ph↗