arXiv subjects

Tina Müller

Publications and source records attributed to Tina Müller.

14 recordsLinked to original sources

arXiv2025

Optical spin tomography in a telecom C-band quantum dot

A central challenge for scalable quantum networks is the realization of coherent interfaces between stationary qubits and telecom-band photonic qubits for long-distance entanglement distribution. Semiconductor quantum dots emitting at telecom wavelengths present a promising spin-photon platform, and a precise understanding of the properties of the confined spin is crucial for optimizing its interplay with the photonic qubit. Here, we simultaneously benchmark the electron and hole g-factors and coherence properties of a droplet epitaxy QD, solely from time and polarization resolved photon correlations. These measurements identify the hole as the preferable qubit for spin-photon entanglement in quantum network nodes. We then perform full state tomography of the confined hole ground state to reveal subtle anisotropies in the spin precession, providing essential diagnostics for minimizing phase errors critical for deterministic multiphoton entanglement generation.

quant-ph↗

arXiv2025

Purcell enhanced and tunable single-photon emission at telecom wavelengths from InAs quantum dots in circular photonic crystal resonators

Embedding semiconductor quantum dots into bullseye resonators has significantly advanced the development of bright telecom quantum light sources for fiber-based quantum networks. To further improve the device flexibility and stability, the bullseye approach should be combined with a pin diode structure to enable Stark tuning, deterministic charging, and enhanced coherence. In this work, we fabricate and characterize photonic structures incorporating hole gratings that efficiently support charge carrier transport while maintaining excellent optical performance. We report bright, Purcell-enhanced single-photon emission in the telecom C-band under above-band and phonon-assisted excitation. Additionally, we present electrically contacted resonators, demonstrating wide range tuneability of quantum dot transitions in the telecom O-band. These results mark significant steps toward scalable and tunable quantum light sources for real-world quantum photonic applications.

physics.optics↗

arXiv2023

Polarization-selective enhancement of telecom wavelength quantum dot transitions in an elliptical bullseye resonator

Semiconductor quantum dots are promising candidates for the generation of nonclassical light. Coupling a quantum dot to a device capable of providing polarization-selective enhancement of optical transitions is highly beneficial for advanced functionalities such as efficient resonant driving schemes or applications based on optical cyclicity. Here, we demonstrate broadband polarization-selective enhancement by coupling a quantum dot emitting in the telecom O-band to an elliptical bullseye resonator. We report bright single-photon emission with a degree of linear polarization of 96%, Purcell factor of 3.9, and count rates up to 3 MHz. Furthermore, we present a measurement of two-photon interference without any external polarization filtering and demonstrate compatibility with compact Stirling cryocoolers by operating the device at temperatures up to 40 K. These results represent an important step towards practical integration of optimal quantum dot photon sources in deployment-ready setups.

physics.optics↗

arXiv2022

Fine structure splitting analysis of cavity-enhanced telecom-wavelength InAs quantum dots grown on a GaAs(111)A vicinal substrate

The effcient generation of entangled photons at telecom wavelength is crucial for the success of many quantum communication protocols and the development of fiber-based quantum networks. Entangled light can be generated by solid state quantum emitters with naturally low fine structure splitting, such as highly symmetric InAs quantum dots (QDs) grown on (111)-oriented surfaces. Incorporating this kind of QDs into optical cavities is critical to achieve sufficient signal intensitiesfor applications, but has so far shown major complications. In this work we present droplet epitaxy of telecom-wavelength InAs QDs within an optical cavity on a vicinal (2° miscut) GaAs(111)A substrate. We show a remarkable enhancement of the photon extraction efficiency compared to previous reports together with a reduction of the density that facilitates the isolation of single spectral lines. Moreover, we characterise the exciton fine structure splitting and employ numerical simulations under the framework of the empirical pseudopotential and configuration interaction methods to study the impact of the miscut on the optical properties of the QDs. We demonstrate that the presence of miscut steps influences the polarisation of the excitonic states and introduces a preferential orientation in the $C_{3v}$ symmetry of the surface.

quant-ph↗

arXiv2022

High performance single-photon sources at telecom wavelength based on broadband hybrid circular Bragg gratings

Semiconductor quantum dots embedded in hybrid circular Bragg gratings are a promising platform for the efficient generation of nonclassical light. The scalable fabrication of multiple devices with similar performance is highly desirable for their practical use as sources of single and entangled photons, while the ability to operate at telecom wavelength is essential for their integration with the existing fiber infrastructure. In this work we combine the promising properties of broadband hybrid circular Bragg gratings with a membrane-transfer process performed on 3" wafer scale. We develop and study single-photon sources based on InAs/GaAs quantum dots emitting in the telecom O-band, demonstrating bright single-photon emission with Purcell factor > 5 and count rates up to 10 MHz. Furthermore, we address the question of reproducibility by benchmarking the performance of 10 devices covering a wide spectral range of 50 nm within the O-band.

physics.optics↗

arXiv2022

Design study for an efficient semiconductor quantum light source operating in the telecom C-band based on an electrically-driven circular Bragg grating

The development of efficient sources of single photons and entangled photon pairs emitting in the low-loss wavelength region around 1550 nm is crucial for long-distance quantum communication. Moreover, direct fiber coupling and electrical carrier injection are highly desirable for deployment in compact and user-friendly systems integrated with the existing fiber infrastructure. Here we present a detailed design study of circular Bragg gratings etched in InP slabs and operating in the telecom C-band. These devices enable the simultaneous enhancement of the X and XX spectral lines, with collection efficiency in NA=0.65 close to 90% for the wavelength range 1520-1580 nm and Purcell factor up to 15. We also investigate the coupling into single mode fiber, which exceeds 70% in UHNA4. Finally, we propose a modified device design directly compatible with electrical carrier injection, reporting Purcell factors up to 20 and collection efficiency in NA=0.65 close to 70% for the whole telecom C-band.

physics.optics↗

arXiv2021

1GHz clocked distribution of electrically generated entangled photon pairs

Quantum networks are essential for realising distributed quantum computation and quantum communication. Entangled photons are a key resource, with applications such as quantum key distribution, quantum relays, and quantum repeaters. All components integrated in a quantum network must be synchronised and therefore comply with a certain clock frequency. In quantum key distribution, the most mature technology, clock rates have reached and exceeded 1GHz. Here we show the first electrically pulsed sub-Poissonian entangled photon source compatible with existing fiber networks operating at this clock rate. The entangled LED is based on InAs/InP quantum dots emitting in the main telecom window, with a multi-photon probability of less than 10% per emission cycle and a maximum entanglement fidelity of 89%. We use this device to demonstrate GHz clocked distribution of entangled qubits over an installed fiber network between two points 4.6km apart.

quant-ph↗

arXiv2017

Ultralow-Noise SiN Trampoline Resonators for Sensing and Optomechanics

In force sensing, optomechanics, and quantum motion experiments, it is typically advantageous to create lightweight, compliant mechanical elements with the lowest possible force noise. Here we report wafer-scale batch fabrication and characterization of high-aspect-ratio, nanogram-scale Si$_3$N$_4$ "trampolines" having quality factors above $4 \times 10^7$ and ringdown times exceeding five minutes (1 mHz linewidth). We measure a thermally limited force noise sensitivity of 16.2$\pm$0.8 aN/Hz$^{1/2}$ at room temperature, with a spring constant ($\sim$1 N/m) 2-5 orders of magnitude larger than those of competing technologies. We also characterize the suitability of these devices for high-finesse cavity readout and optomechanics applications, finding no evidence of surface or bulk optical losses from the processed nitride in a cavity achieving finesse 40,000. These parameters provide access to a single-photon cooperativity $C_0 \sim 8$ in the resolved-sideband limit, wherein a variety of outstanding optomechanics goals become feasible.

cond-mat.mes-hall↗

arXiv2016

Simple High-Bandwidth Sideband Locking with Heterodyne Readout

We present a robust sideband laser locking technique that is ideally suited for applications requiring low probe power and heterodyne readout. By feeding back to a high-bandwidth voltage controlled oscillator, we lock a first-order phase-modulation sideband to a table-top high-finesse Fabry-Perot cavity, achieving a feedback bandwidth of 3.5 MHz with a single integrator, limited fundamentally by the signal delay. The directly measured transfer function of the closed feedback loop agrees with a model assuming ideal system components, and from this we suggest a modified design that should realistically achieve a bandwidth exceeding 6 MHz with a near-causally limited feedback gain of $4\times 10^7$ at 1 kHz. The off-resonance optical carrier is used for alignment-free heterodyne readout, alleviating the need for a second laser or additional optical modulators.

physics.optics↗

arXiv2016

Universal growth scheme for entanglement-ready quantum dots

Efficient sources of individual pairs of entangled photons are required for quantum networks to operate using fibre optic infrastructure. Entangled light can be generated by quantum dots (QDs) with naturally small fine-structure-splitting (FSS) between exciton eigenstates. Moreover, QDs can be engineered to emit at standard telecom wavelengths. To achieve sufficient signal intensity for applications, QDs have been incorporated into 1D optical microcavities. However, combining these properties in a single device has so far proved elusive. Here, we introduce a growth strategy to realise QDs with small FSS in the conventional telecom band, and within an optical cavity. Our approach employs droplet-epitaxy of InAs quantum dots on (001) substrates. We show the scheme improves the symmetry of the dots by 72%. Furthermore, our technique is universal, and produces low FSS QDs by molecular beam epitaxy on GaAs emitting at ~900nm, and metal-organic vapour phase epitaxy on InP emitting at 1550 nm, with mean FSS 4x smaller than for Stranski-Krastanow QDs.

quant-ph↗

arXiv2016

Optically Defined Mechanical Geometry

In the field of optomechanics, radiation forces have provided a particularly high level of control over the frequency and dissipation of mechanical elements. Here we propose a class of optomechanical systems in which light exerts a similarly profound influence over two other fundamental parameters: geometry and mass. By applying an optical trap to one lattice site of an extended phononic crystal, we show it is possible to create a tunable, localized mechanical mode. Owing to light's simultaneous and constructive coupling with the structure's continuum of modes, we estimate that a trap power at the level of a single intracavity photon should be capable of producing a significant effect within a realistic, chip-scale device.

physics.optics↗

arXiv2015

Enhanced Optomechanical Levitation of Minimally Supported Dielectrics

Optically levitated mechanical sensors promise isolation from thermal noise far beyond what is possible using flexible materials alone. One way to access this potential is to apply a strong optical trap to a minimally supported mechanical element, thereby increasing its quality factor $Q_m$. Current schemes, however, require prohibitively high laser power ($\sim10$ W), and the $Q_m$ enhancement is ultimately limited to a factor of $\sim$ 50 by hybridization between the trapped mode and the dissipative modes of the supporting structure. Here we propose a levitation scheme taking full advantage of an optical resonator to reduce the circulating power requirements by many orders of magnitude. Applying this scheme to the case of a dielectric disk in a Fabry-Perot cavity, we find a tilt-based tuning mechanism for optimizing both center-of-mass and torsional mode traps. Notably, the two modes are trapped with comparable efficiency, and we estimate that a 10-micron-diameter, 100-nm-thick Si disc could be trapped to a frequency of $\sim$ 10 MHz with only $30$ mW circulating in a cavity of (modest) finesse 1500. Finally, we simulate the effect such a strong trap would have on a realistic doubly-tethered disc. Of central importance, we find torsional motion is comparatively immune to $Q_m$-limiting hybridization, allowing a $Q_m$ enhancement factor of $\sim$ 1500. This opens the possibility of realizing a laser-tuned 10 MHz mechanical system with a quality factor of order a billion.

quant-ph↗

arXiv2013

The electronic structure of the silicon vacancy color center in diamond

The negatively charged silicon vacancy (SiV) color center in diamond has recently proven its suitability for bright and stable single photon emission. However, its electronic structure so far has remained elusive. We here explore the electronic structure by exposing single SiV defects to a magnetic field where the Zeeman effect lifts the degeneracy of magnetic sublevels. The similar response of single centers and a SiV ensemble in a low strain reference sample proves our ability to fabricate almost perfect single SiVs, revealing the true nature of the defect's electronic properties. We model the electronic states using a group-theoretical approach yielding a good agreement with the experimental observations. Furthermore, the model correctly predicts polarization measurements on single SiV centers and explains recently discovered spin selective excitation of SiV defects.

cond-mat.mtrl-sci↗

arXiv2012

Biologists meet statisticians: A workshop for young scientists to foster interdisciplinary team work

Life science and statistics have necessarily become essential partners. The need to plan complex, structured experiments, involving elaborated designs, and the need to analyse datasets in the era of systems biology and high throughput technologies has to build upon professional statistical expertise. On the other hand, conducting such analyses and also developing improved or new methods, also for novel kinds of data, has to build upon solid biological understanding and practise. However, the meeting of scientists of both fields is often hampered by a variety of communicative hurdles - which are based on field-specific working languages and cultural differences. As a step towards a better mutual understanding, we developed a workshop concept bringing together young experimental biologists and statisticians, to work as pairs and learn to value each others competences and practise interdisciplinary communication in a casual atmosphere. The first implementation of our concept was a cooperation of the German Region of the International Biometrical Society and the Leibnitz Institute DSMZ-German Collection of Microorganisms and Cell Cultures (short: DSMZ), Braunschweig, Germany. We collected feedback in form of three questionnaires, oral comments, and gathered experiences for the improvement of this concept. The long-term challenge for both disciplines is the establishment of systematic schedules and strategic partnerships which use the proposed workshop concept to foster mutual understanding, to seed the necessary interdisciplinary cooperation network, and to start training the indispensable communication skills at the earliest possible phase of education.

stat.OT↗