arXiv subjects

Ting Li

Publications and source records attributed to Ting Li.

At least 163 records · Page 9Linked to original sources

arXiv2015

Trigger of a blowout jet in a solar coronal mass ejection associated with a flare

Using the multi-wavelength images and the photospheric magnetograms from the \emph{Solar Dynamics Observatory}, we study the flare which was associated by the only one coronal mass ejection (CME) in active region (AR) 12192. The eruption of a filament caused a blowout jet, and then an M4.0 class flare occurred. This flare was located at the edge of AR instead of in the core region. The flare was close to the apparently "open" fields, appearing as extreme-ultraviolet structures that fan out rapidly. Due to the interaction between flare materials and "open" fields, the flare became an eruptive flare, leading to the CME. Then at the same site of the first eruption, another small filament erupted. With the high spatial and temporal resolution H$α$ data from the New Vacuum Solar Telescope at the \emph{Fuxian Solar Observatory}, we investigate the interaction between the second filament and the nearby "open" lines. The filament reconnected with the "open" lines, forming a new system. To our knowledge, the detailed process of this kind of interaction is reported for the first time. Then the new system rotated due to the untwisting motion of the filament, implying that the twist was transferred from the closed filament system to the "open" system. In addition, the twist seemed to propagate from the lower atmosphere to the upper layers, and was eventually spread by the CME to the interplanetary space.

astro-ph.SR↗

arXiv2015

High-resolution Observations of a Flux Rope with the Interface Region Imaging Spectrograph

We report the observations of a flux rope at transition region temperatures with the \emph{Interface Region Imaging Spectrograph} (IRIS) on 30 August 2014. Initially, magnetic flux cancellation constantly took place and a filament was activated. Then the bright material from the filament moved southward and tracked out several fine structures. These fine structures were twisted and tangled with each other, and appeared as a small flux rope at 1330 Å, with a total twist of about 4$π$. Afterwards, the flux rope underwent a counter-clockwise (viewed top-down) unwinding motion around its axis. Spectral observations of C {\sc ii} 1335.71 Å at the southern leg of the flux rope showed that Doppler redshifts of 6$-$24 km s$^{-1}$ appeared at the western side of the axis, which is consistent with the counter-clockwise rotation motion. We suggest that the magnetic flux cancellation initiates reconnection and some activation of the flux rope. The stored twist and magnetic helicity of the flux rope are transported into the upper atmosphere by the unwinding motion in the late stage. The small-scale flux rope (width of 8.3$^{\prime\prime}$) had a cylindrical shape with helical field lines, similar to the morphology of the large-scale CME core (width of 1.54 $R_{\odot}$) on 2 June 1998. This similarity shows the presence of flux ropes of different scales on the Sun.

astro-ph.SR↗

arXiv2015

Filament Activation in Response to Magnetic Flux Emergence and Cancellation in Filament Channels

We make a comparative analysis for two filaments that showed quite different activation in response to the flux emergence within the filament channels. The observations from the Solar Dynamics Observatory (SDO) and Global Oscillation Network Group (GONG) are carried out to analyze the two filaments on 2013 August 17-20 and September 29. The first event showed that the main body of the filament was separated into two parts when an active region (AR) emerged with a maximum magnetic flux of about 6.4*10^21 Mx underlying the filament. The close neighborhood and common direction of the bright threads in the filament and the open AR fan loops suggest similar magnetic connectivity of these two flux systems. The equilibrium of the filament was not destroyed within 3 days after the start of the emergence of the AR. To our knowledge, similar observations have never been reported before. In the second event, the emerging flux occurred nearby a barb of the filament with a maximum magnetic flux of 4.2*10^20 Mx, about one order of magnitude less than that of the first event. The emerging flux drove the convergence of two patches of parasitic polarity in the vicinity of the barb, and resulted in cancellation between the parasitic polarity and nearby network fields. About 20 hours after the onset of the emergence, the filament was entirely erupted. Our findings imply that the location of emerging flux within the filament channel is probably crucial to filament evolution. If the flux emergence appears nearby the barbs, flux cancellation of emerging flux with the filament magnetic fields is prone to occur, which probably causes the filament eruption. The comparison of the two events shows that the emergence of an entire AR may still not be enough to disrupt the stability of a filament system and the actual eruption does occur only after the flux cancellation sets in.

astro-ph.SR↗

arXiv2015

Quasi-periodic Slipping Magnetic Reconnection During an X-class Solar Flare Observed by the Solar Dynamics Observatory and Interface Region Imaging Spectrograph

We firstly report the quasi-periodic slipping motion of flare loops during an eruptive X-class flare on 2014 September 10. The slipping motion was investigated at a specific location along one of the two ribbons and can be observed throughout the impulsive phase of the flare. The apparent slipping velocity was 20-110 km/s and the associated period was 3$-$6 min. The footpoints of flare loops appeared as small-scale bright knots observed in 1400 Å, corresponding to fine structures of the flare ribbon. These bright knots were observed to move along the southern part of the longer ribbon and also exhibited a quasi-periodic pattern. The Si IV 1402.77 Å line was redshifted by 30-50 km/s at the locations of moving knots with a ~ 40-60 km/s line width, larger than other sites of the flare ribbon. We suggest that the quasi-periodic slipping reconnection is involved in this process and the redshift at the bright knots is probably indicative of reconnection downflow. The emission line of Si IV at the northern part of the longer ribbon also exhibited obvious redshifts of about 10-70 km/s in the impulsive phase of the flare, with the redshifts at the outer edges of the ribbon larger than those in the middle. The redshift velocities at post-flare loops reached about 80-100 km/s in the transition region.

astro-ph.SR↗

arXiv2014

Direct Observations of Tether-cutting Reconnection During a Major Solar Event From 2014 February 24 to 25

Using the multi-wavelength data from Atmospheric Imaging Assembly on board the Solar Dynamic Observatory, we investigated two successive solar flares, a C5.1 confined flare and an X4.9 ejective flare with a halo coronal mass ejection,in NOAA AR 11990 from 2014 Feb 24 to 25. Before the confined are onset, EUV brightening beneath the filament was detected. As the are began, a twisted helical flux rope (FR) wrapping around the filament moved upward and then stopped, and in the meantime an obvious X-ray source below it was observed. Prior to the ejective X4.9 flare, some pre-existing loop structures in the active region interacted with each other, which produced a brightening region beneath the filament. Meanwhile, a small flaring loop appeared below the interaction region and some new helical lines connecting the far ends of the loop structures was gradually formed and continually added into the former twisted FR. Then, due to the resulting imbalance between the magnetic pressure and tension, the new FR together with the filament erupted outward. Our observations coincide well with tether-cutting model, suggesting that the two flares probably have the same triggering mechanism, i.e., tether-cutting reconnection. To our knowledge, this is the first direct observation of tether-cutting reconnection occurring between the pre-existing loops in active region. In the ejective flare case, the erupting filament exhibited an omega-like kinked structure and underwent an exponential rise after a slow-rise phase, indicating the kink instability might be also responsible for the eruption initiation.

astro-ph.SR↗

arXiv2014

Optical BVRI Photometry of Common Proper Motion F/G/K+M Wide Separation Binaries

We present optical (BVRI) photometric measurements of a sample of 76 common proper motion wide separation main sequence binary pairs. The pairs are composed of a F-, G-, or K-type primary star and an M-type secondary. The sample is selected from the revised NLTT catalog and the LSPM catalog. The photometry is generally precise to 0.03 mag in all bands. We separate our sample into two groups, dwarf candidates and subdwarf candidates, using the reduced proper motion (RPM) diagram constructed with our improved photometry. The M subdwarf candidates in general have larger $V-R$ colors than the M dwarf candidates at a given $V-I$ color. This is consistent with an average metallicity difference between the two groups, as predicted by the PHOENIX/BT-Settl models. The improved photometry will be used as input into a technique to determine the metallicities of the M-type stars.

astro-ph.SR↗

arXiv2014

Monitoring the atmospheric throughput at Cerro Tololo Inter-American Observatory with aTmCam

We have built an Atmospheric Transmission Monitoring Camera (aTmCam), which consists of four telescopes and detectors each with a narrow-band filter that monitors the brightness of suitable standard stars. Each narrowband filter is selected to monitor a different wavelength region of the atmospheric transmission, including regions dominated by the precipitable water vapor and aerosol optical depth. The colors of the stars are measured by this multi narrow-band imager system simultaneously. The measured colors, a model of the observed star, and the measured throughput of the system can be used to derive the atmospheric transmission of a site on sub-minute time scales. We deployed such a system to the Cerro Tololo Inter-American Observatory (CTIO) and executed two one-month-long observing campaigns in Oct-Nov 2012 and Sept-Oct 2013. We have determined the time and angular scales of variations in the atmospheric transmission above CTIO during these observing runs. We also compared our results with those from a GPS Water Vapor Monitoring System and find general agreement. The information for the atmospheric transmission can be used to improve photometric precision of large imaging surveys such as the Dark Energy Survey and the Large Synoptic Survey Telescope.

astro-ph.IM↗

arXiv2014

Slipping Magnetic Reconnection Triggering a Solar Eruption of a Triangle-flag Flux Rope

We firstly report the simultaneous activities of a slipping motion of flare loops and a slipping eruption of a flux rope in 131 Å and 94 Å channels on 2014 February 02. The east hook-like flare ribbon propagated slippingly at a speed of about 50 km s$^{-1}$, which lasted about 40 min and extended by more than 100 Mm, but the west flare ribbon moved in the opposite direction with a speed of 30 km s$^{-1}$. At the later phase of the flare activity, a "bi-fan" system of flare loops was well developed. The east footpoints of the flux rope showed an apparent slipping motion along the hook of the ribbon, simultaneously the fine structures of the flux rope rose up rapidly at a speed of 130 km s$^{-1}$, much faster the whole flux rope. We infer that the east footpoints of the flux rope are successively heated by a slipping magnetic reconnection during the flare, which results in the apparent slippage of the flux rope. The slipping motion delineates a "triangle-flag surface" of the flux rope, implying that the topology of a flux rope is more complex than anticipated.

astro-ph.SR↗

arXiv2013

Homologous Flux Ropes Observed by SDO/AIA

We firstly present the Solar Dynamics Observatory observations of four homologous flux ropes in active region (AR) 11745 on 2013 May 20-22. The four flux ropes are all above the neutral line of the AR, with endpoints anchoring at the same region, and have the generally similar morphology. For the first three flux ropes, they rose up with a velocity of less than 30 km s$^{-1}$ after their appearances, and subsequently their intensities at 131 Å decreased and the flux ropes became obscure. The fourth flux rope erupted ultimately with a speed of about 130 km s$^{-1}$ and formed a coronal mass ejection. The associated filament showed an obvious anti-clockwise twist motion at the initial stage, and the twist was estimated at 4$π$. This indicates that kink instability possibly triggers the early rise of the fourth flux rope. The activated filament material was spatially within the flux rope and they showed consistent evolution in their early stages. Our findings provide new clues for understanding the characteristics of flux ropes. Firstly, there are multiple flux ropes that are successively formed at the same location during an AR evolution process. Secondly, a slow-rise flux rope does not necessarily result in a CME, and a fast-eruption flux rope results in a CME.

astro-ph.SR↗

arXiv2013

SDO/AIA and Hinode/EIS Observations of Interaction Between an EUV Wave and Active Region Loops

We present detailed analysis of an extreme ultraviolet (EUV) wave and its interaction with active region (AR) loops observed by the Solar Dynamics Observatory/Atmospheric Imaging Assembly and the Hinode EUV Imaging Spectrometer (EIS). This wave was initiated from AR 11261 on 2011 August 4 and propagated at velocities of 430--910 km\s. It was observed to traverse another AR and cross over a filament channel on its path. The EUV wave perturbed neighboring AR loops and excited a disturbance that propagated toward the footpoints of these loops. EIS observations of AR loops revealed that at the time of the wave transit, the original redshift increased by about 3 km\s, while the original blueshift decreased slightly. After the wave transit, these changes were reversed. When the EUV wave arrived at the boundary of a polar coronal hole, two reflected waves were successively produced and part of them propagated above the solar limb. The first reflected wave above the solar limb encountered a large-scale loop system on its path, and a secondary wave rapidly emerged 144 Mm ahead of it at a higher speed. These findings can be explained in the framework of a fast-mode magnetosonic wave interpretation for EUV waves, in which observed EUV waves are generated by expanding coronal mass ejections.

astro-ph.SR↗

arXiv2013

Fine-scale Structures of Flux Ropes Tracked by Erupting Material

We present the Solar Dynamics Observatory observations of two flux ropes respectively tracked out by material from a surge and a failed filament eruption on 2012 July 29 and August 04. For the first event, the interaction between the erupting surge and a loop-shaped filament in the east seems to "peel off" the filament and add bright mass into the flux rope body. The second event is associated with a C-class flare that occurs several minutes before the filament activation. The two flux ropes are respectively composed of 85$\pm$12 and 102$\pm$15 fine-scale structures, with an average width of about 1$\arcsec$.6. Our observations show that two extreme ends of the flux rope are rooted in the opposite polarity fields and each end is composed of multiple footpoints (FPs) of the fine-scale structures. The FPs of the fine-scale structures are located at network magnetic fields, with magnetic fluxes from 5.6$\times10^{18}$ Mx to 8.6$\times10^{19}$ Mx. Moreover, almost half of the FPs show converging motion of smaller magnetic structures over 10 hr before the appearance of the flux rope. By calculating the magnetic fields of the FPs, we deduce that the two flux ropes occupy at least 4.3$\times10^{20}$ Mx and 7.6$\times10^{20}$ Mx magnetic fluxes, respectively.

astro-ph.SR↗

arXiv2013

aTmcam: A Simple Atmospheric Transmission Monitoring Camera For Sub 1% Photometric Precision

Traditional color and airmass corrections can typically achieve ~0.02 mag precision in photometric observing conditions. A major limiting factor is the variability in atmospheric throughput, which changes on timescales of less than a night. We present preliminary results for a system to monitor the throughput of the atmosphere, which should enable photometric precision when coupled to more traditional techniques of less than 1% in photometric conditions. The system, aTmCam, consists of a set of imagers each with a narrow-band filter that monitors the brightness of suitable standard stars. Each narrowband filter is selected to monitor a different wavelength region of the atmospheric transmission, including regions dominated by the precipitable water absorption and aerosol scattering. We have built a prototype system to test the notion that an atmospheric model derived from a few color indices measurements can be an accurate representation of the true atmospheric transmission. We have measured the atmospheric transmission with both narrowband photometric measurements and spec- troscopic measurements; we show that the narrowband imaging approach can predict the changes in the throughput of the atmosphere to better than ~10% across a broad wavelength range, so as to achieve photometric precision less than 0.01 mag.

astro-ph.IM↗

arXiv2012

SDO/AIA Observations of Large-Amplitude Longitudinal Oscillations in a Solar Filament

We present the first \emph{Solar Dynamics Observatory}/Atmospheric Imaging Assembly observations of the large-amplitude longitudinal (LAL) oscillations in the south and north parts (SP and NP) of a solar filament on 2012 April 7. Both oscillations are triggered by flare activities close to the filament. The period varies with filamentary threads, ranging from 44 to 67 min. The oscillations of different threads are out of phase, and their velocity amplitudes vary from 30 to 60 km s$^{-1}$, with a maximum displacement of about 25 Mm. The oscillations of the SP repeat for about 4 cycles without any significant damping and then a nearby C2.4 flare causes the transition from the LAL oscillations of the filament to its later eruption. The filament eruption is also associated with a coronal mass ejection and a B6.8 flare. However, the oscillations of the NP damp with time and die out at last. Our observations show that the activated part of the SP repeatedly shows a helical motion. This indicates that the magnetic structure of the filament is possibly modified during this process. We suggest that the restoring force is the coupling of the magnetic tension and gravity.

astro-ph.SR↗

arXiv2012

Self-cancellation of ephemeral regions in the quiet Sun

With the observations from the Helioseismic and Magnetic Imager aboard the Solar Dynamics Observatory, we statistically investigate the ephemeral regions (ERs) in the quiet Sun. We find that there are two types of ERs: normal ERs (NERs) and self-cancelled ERs (SERs). Each NER emerges and grows with separation of its opposite polarity patches which will cancel or coalesce with other surrounding magnetic flux. Each SER also emerges and grows and its dipolar patches separate at first, but a part of magnetic flux of the SER will move together and cancel gradually, which is described with the term "self-cancellation" by us. We identify 2988 ERs among which there are 190 SERs, about 6.4% of the ERs. The mean value of self-cancellation fraction of SERs is 62.5%, and the total self-cancelled flux of SERs is 9.8% of the total ER flux. Our results also reveal that the higher the ER magnetic flux is, (i) the easier the performance of ER self-cancellation is, (ii) the smaller the self-cancellation fraction is, and (iii) the more the self-cancelled flux is. We think that the self-cancellation of SERs is caused by the submergence of magnetic loops connecting the dipolar patches, without magnetic energy release.

astro-ph.SR↗

arXiv2011

SDO/AIA Observations of Secondary Waves Generated by Interaction of the 2011 June 7 Global EUV Wave With Solar Coronal Structures

We present SDO/AIA observations of the interaction of a global EUV wave on 2011 June 7 with active regions (ARs), coronal holes (CHs) and coronal bright structures. The primary global wave has a three-dimensional dome shape, with propagation speeds ranging from 430-780 km/s in different directions. The primary coronal wave runs in front of the expanding loops involved in the CME and its propagation speeds are approximately constant within 10-20 minutes. Upon arrival at an AR on its path, the primary EUV wave apparently disappears and a secondary wave rapidly reemerges 75 Mm within the AR boundary at a similar speed. When the EUV wave encounters a coronal bright structure, an additional wave front appears there and propagates in front of it at a velocity nearly a factor of 2 faster. Reflected waves from a polar CH and a coronal bright structure are observed and propagate fractionally slower than the primary waves. Some of these phenomena can be equally explained by either a wave or non-wave model alone. However, taken together, these observations provide new evidence for the multitudes of global EUV waves, in which a true MHD fast-mode wave or shock propagates in front of an expanding CME bubble.

astro-ph.SR↗

arXiv2011

Three-Dimensional Reconstruction of an Erupting Filament with SDO and STEREO Observations

On 2010 August 1, a global solar event was launched involving almost the entire Earth-facing side of the Sun. This event mainly consisted of a C3.2 flare, a polar crown filament eruption and two Earth-directed coronal mass ejections (CMEs). The observations from the Solar Dynamics Observatory (SDO) and the Solar Terrestrial Relations Observatory (STEREO) showed that all the activities were coupled together, suggesting a global character of the magnetic eruption. We reconstruct the three-dimensional geometry of the polar crown filament using observations from three different viewpoints (STEREO A, B and SDO) for the first time. The filament undergoes two eruption processes. Firstly, the main body of the filament rises up, while it also moves towards the low-latitude region with a change in inclination by 48 degree and expands only in the altitudinal and latitudinal direction in the field of view of Atmospheric Imaging Assembly. We investigate the true velocities and accelerations of different locations along the filament, and find that the highest location always has the largest acceleration during this eruption process. During the late phase of the first eruption, part of the filament material separates from the eastern leg. This material displays a projectile motion and moves towards the west at a constant velocity of 141.8 km/s. This may imply that the polar crown filament consists of at least two groups of magnetic systems.

astro-ph.SR↗

arXiv2011

SDO Observations of Magnetic Reconnection at Coronal Hole Boundaries

With the observations from the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager (HMI) aboard the \emph{Solar Dynamics Observatory}, we investigate the coronal hole boundaries (CHBs) of an equatorial extension of polar coronal hole. At the CHBs, lots of extreme-ultraviolet (EUV) jets, which appear to be the signatures of magnetic reconnection, are observed in the 193 Å images, and some jets occur repetitively at the same sites. The evolution of the jets is associated with the emergence and cancelation of magnetic fields. We notice that both the east and the west CHBs shift westward, and the shift velocities are close to the velocities of rigid rotation compared with those of the photospheric differential rotation. This indicates that magnetic reconnection at CHBs results in the evolution of CHBs and maintains the rigid rotation of coronal holes.

astro-ph.SR↗

arXiv2010

Vector Magnetic Fields and Current Helicities in Coronal Holes and Quiet Regions

In the solar photosphere, many properties of coronal holes (CHs) are not known, especially vector magnetic fields. Using observations from \emph{Hinode}, we investigate vector magnetic fields, current densities and current helicities in two CHs and compare them with two normal quiet regions (QRs) for the first time. We find that, in the CHs and QRs, the areas where large current helicities are located are mainly co-spatial with strong vertical and horizontal field elements both in shape and location. In the CHs, horizontal magnetic fields, inclination angles, current densities and current helicities are larger than those in the QRs. The mean vertical current density and current helicity, averaged over all the observed areas including the CHs and QRs, are approximately 0.008 A m$^{-2}$ and 0.005 G$^{2}$ m$^{-1}$, respectively. The mean current density in magnetic flux concentrations where the vertical fields are stronger than 100 G is as large as 0.012 $\pm$ 0.001 A m$^{-2}$, consistent with that in the flare productive active regions. Our results imply that the magnetic fields, especially the strong fields, both in the CHs and QRs are nonpotential.

astro-ph.SR↗