arXiv subjects

Tingyu Gou

Publications and source records attributed to Tingyu Gou.

At least 19 recordsLinked to original sources

arXiv2026

Multi-Viewpoint Observation of a Failed Prominence Eruption on the Sun

Solar eruptions are sudden ejections of coronal mass and magnetic fields accompanied by intense energy release. The eruptive structure does not always erupt successfully, but sometimes fails to escape the Sun after initiation. The failure of an eruption, however, provides an invaluable opportunity for understanding the intricate mechanism of eruptions. We present a comprehensive observation of a failed prominence eruption on the Sun, taking advantage of multi-viewpoint and multi-messenger imaging. Simultaneous off-limb and on-disk observation gives evidence of magnetic reconnection processes occurring at different sites during the flare. Particularly, in addition to the standard flare reconnection behind the eruption, strong external reconnection occurs on the erupting flux rope, evidenced by a wealth of signatures via multi-wavelength imaging and spectroscopy. The two reconnection processes may play contrasting roles in the flux rope's acceleration and compete in altering the magnetic flux in the rope. As the high rate of external reconnection proceeds, the flux rope and embedded prominence decelerate noticeably and fail to erupt into the heliosphere, under strong magnetic confinement of overlying fields. Our results illustrate a well-defined physical picture for solar eruptive activities and provide insight into the lack of coronal mass ejections found in other solar-type stars.

astro-ph.SR↗

arXiv2025

Long-Duration Nonthermal Motions in the Supra-Arcade and Loop-Top Region During an Eruptive Solar Flare

Solar flares are widely accepted to be powered by magnetic reconnection that involves complex dynamics in various scales. The flare supra-arcade and loop-top region, directly impacted by fast reconnection downflows, contains a wealth of microscopic dynamics, which are, however, difficult to resolve in imaging. We present simultaneous spectroscopic and imaging observations of hot flaring plasma above the loop tops by IRIS and SDO/AIA. IRIS continuously observed high-temperature Fe XXI 1354.08 A spectral emissions throughout the long-duration gradual phase of the X-class flare. We found weak Doppler blue shifts near the loop-top region, indicative of bulk plasma motions from chromospheric evaporation based on the 3D flare loop orientation. Strong nonthermal velocities are detected at the bottom of the flare supra-arcade fan/plasma sheet, suggestive of the presence of turbulence in the flare current sheet region. In addition, disorganized nonthermal plasma motions are constantly detected until the very end of the flare, indicating irregular unresolved plasma flows in the cusp and loop-top region. The spatial and temporal evolution of spectral parameters follow the dynamics resulting from on-going magnetic reconnection during the prolonged gradual phase. The long-lasting nonthermal plasma motions may contribute to the high and steady temperature of flaring plasmas above flare loops.

astro-ph.SR↗

arXiv2025

Influence of the Deformation of Coronal Mass Ejections on Their In-Situ Fitting with Circular-Cross-Section Flux Rope Models

Understanding the properties, especially the magnetohydrodynamic (MHD) invariants, of coronal mass ejections (CMEs) measured in-situ is key to bridging the CME properties from the Sun to interplanetary space. In order to investigate CMEs from the in-situ measurements that provide a one-dimensional (1-D) cut of the CME parameters over the spacecraft trajectory, various magnetic flux rope (MFR) models have been developed, among which the models with a circular cross-section are the most popular and widely used. CMEs are found to be deformed during their propagation in interplanetary space, in which the cross-section may be flattened in the direction of propagation, i.e., to develop an elliptical or even pancake-like shape. We use numerical MHD simulations in 2.5-D to investigate the influence of the CME deformation on the in-situ fitting using two linear force-free MFR models with a circular cross-section, and we focus on the axial and poloidal magnetic fluxes, which are conserved in the ideal MHD frame and simulations. We quantitatively compare the fitted axial and poloidal fluxes with those in simulations. We find that both models underestimate the axial flux compared to that in simulations, and such underestimation depends on the CME deformation. However, the fitting of the poloidal flux is independent of the deformation. We discuss the reasons for the axial flux underestimation and the implication of the CME deformation for the CME in-situ fitting.

physics.space-ph↗

arXiv2024

Thermal Properties of Current Sheet Plasmas in Solar Flares

The current sheet is an essential feature in solar flares and is the primary site for magnetic reconnetion and energy release. Imaging observations feature a long linear structure above the candle-flame-shaped flare loops, which resembles the standard flare model with the current sheet viewed edge-on. We investigate the thermal properties of plasmas surrounding the linear sheet during flares, using EUV observations from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO). The differential emission measure (DEM) analyses show evidence of high temperatures in the plasma sheets (PSs), containing hot emissions from only a narrow temperature range, suggestive of an isothermal feature. The sheet's temperature remains constant at different heights above the flare arcade, peaking at around logT=7.0-7.1; while the well-studied 2017 September 10 X8.2 flare exhibits as an exception in that the temperature decreases with an increasing height and peaks higher (logT=7.25) during the gradual phase. Most PS cases also hold similar emission measures and thicknesses; while the PS's emissions drop exponentially above the flare arcade, the sheet thicknesses show no significant height association as for all the measurements. The characteristics of isothermal and steady temperature suggests balanced heating and cooling processes along the current sheet, particularly additional heating may exist to compensate for the conductive and radiative cooling away from the reconenction site. Our results suggest a steady and uniform sheet structure in the macroscopic scale that results from flare reconnection.

astro-ph.SR↗

arXiv2024

High-resolution Observation of Blowout Jets Regulated by Sunspot Rotation

Coronal jets are believed to be the miniature version of large-scale solar eruptions. In particular, the eruption of a mini-filament inside the base arch is suggested to be the trigger and even driver of blowout jets. Here we propose an alternative triggering mechanism, based on high-resolution H-alpha observations of a blowout jet associated with a mini-filament and an M1.2-class flare. The mini-filament remains largely stationary during the blowout jet, except that it is straddled by flare loops connecting two flare ribbons, indicating that the magnetic arcade embedding the mini-filament has been torn into two parts, with the upper part escaping with the blowout jet. In the wake of the flare, the southern end of the mini-filament fans out like neighboring fibrils, indicative of mass and field exchanges between the mini-filament and the fibrils. The blowout jet is preceded by a standard jet. With H-alpha fibrils moving toward the single-strand spire in a sweeping fashion, the standard jet transitions to the blowout jet. The similar pattern of standard-to-blowout jet transition occurs in an earlier C-class flare before the mini-filament forms. The spiraling morphology and sweeping direction of these fibrils are suggestive of their footpoints being dragged by the leading sunspot that undergoes clockwise rotation for over two days. Soon after the sunspot rotation reaches a peak angular speed as fast as 10 deg/hr, the dormant active region becomes flare-productive, and the mini-filament forms through the interaction of moving magnetic features from the rotating sunspot with satellite spots/pores. Hence, we suggest that the sunspot rotation plays a key role in building up free energy for flares and jets and in triggering blowout jets by inducing sweeping motions of fibrils.

astro-ph.SR↗

arXiv2024

Acceleration and Release of Solar Energetic Particles Associated with a Coronal Shock on 2021 September 28 Observed by Four Spacecraft

Extreme ultraviolet (EUV) waves are thought to be the propagating footprint of the shock on the solar surface. One of the key questions in SEP research is the timing of the SEP release with respect to the time when the EUV wave magnetically connects with an observer. Taking advantage of close-to-the-Sun measurements by Parker Solar Probe (PSP) and Solar Orbiter (SolO), we investigate an SEP event that occurred on 2021 September 28 and was observed at different locations by SolO, PSP, STEREO-A, and near-Earth spacecraft. During this time, SolO, PSP and STEREO-A shared similar nominal magnetic footpoints relative to the SEP source region but were at different heliocentric distances. We find that the SEP release times estimated at these four locations were delayed compared to the times when the EUV wave intercepted the footpoints of the nominal magnetic fields connecting to each spacecraft by around 30 to 60 minutes. Combining observations in multiple wavelengths of radio, white-light, and EUV, with a geometrical shock model, we analyze the associated shock properties, and discuss the acceleration and delayed release processes of SEPs in this event as well as the accuracy and limitations of using EUV waves to determine the SEP acceleration and release times.

physics.space-ph↗

arXiv2023

Complete replacement of magnetic flux in a flux rope during a coronal mass ejection

Solar coronal mass ejections are the most energetic events in the Solar System. In their standard formation model, a magnetic flux rope builds up into a coronal mass ejection through magnetic reconnection that continually converts overlying, untwisted magnetic flux into twisted flux enveloping the pre-existing rope. However, only a minority of coronal mass ejections carry a coherent magnetic flux rope as their core structure, which casts doubt on the universality of this orderly wrapping process. Here we provide observational evidence of a different formation and eruption mechanism of a magnetic flux rope from an S-shaped thread, where its magnetic flux is fully replaced via flare reconnections. One of the footpoints of the sigmoidal feature slipped and expanded during the formation, and then moved to a completely new place, associated with the highly dynamical evolution of flare ribbons and a twofold increase in magnetic flux through the footpoint, during the eruption. Such a configuration is not predicted by standard formation models or numerical simulations and highlights the three-dimensional nature of magnetic reconnections between the flux rope and the surrounding magnetic field.

astro-ph.SR↗

arXiv2022

Effects of supra-arcade downflows interacting with the post-flare arcade

Supra-arcade downflows (SADs) are dark voids descending through plasma above the post-flare arcade. Although they are generally viewed as byproducts of flare reconnections in the corona, the nature of SADs is under debate. Here we investigated six distinct episodes of SADs observed in the post-maximum phase of an M-class flare of April 11, 2013. Differential emission measure analysis revealed that SAD cases occurring close to the flare maximum contain an enhanced hot plasma component at 5--7~MK whereas those occurring later exhibited a depression in hot plasma at 7--12~MK compared to the ambient supra-arcade plasma. On-disk location of the flare enabled us to examine in detail the interaction of SADs with the post-flare arcade, whose effects include 1) transverse oscillations of period $\sim\,$160~s in the supra-arcade rays in the wake of voids, 2) footpoint brightening in 1700{~Å} whose peak is delayed by 22-46~s with respect to the SAD's arrival at the top of the arcade, and 3) EUV intensity perturbations expanding and propagating with a speed $\sim\,$400 km~s$^{-1}$. On the other hand, due to line-of-sight confusion in the optically thin corona, the ribbon enhancement following the interaction produces an illusion of plasma rebound at the top of the arcade, where the interaction fails to yield significant plasma heating. These effects indicate that the interaction mainly generates MHD waves propagating toward the surface, which may further produce quasi-periodic brightening at flare ribbons, therefore contributing to quasi-periodic flare gradual phase emission in EUV.

astro-ph.SR↗

arXiv2022

Solar Ring Mission: Building a Panorama of the Sun and Inner-heliosphere

Solar Ring (SOR) is a proposed space science mission to monitor and study the Sun and inner heliosphere from a full 360° perspective in the ecliptic plane. It will deploy three 120°-separated spacecraft on the 1-AU orbit. The first spacecraft, S1, locates 30° upstream of the Earth, the second, S2, 90° downstream, and the third, S3, completes the configuration. This design with necessary science instruments, e.g., the Doppler-velocity and vector magnetic field imager, wide-angle coronagraph, and in-situ instruments, will allow us to establish many unprecedented capabilities: (1) provide simultaneous Doppler-velocity observations of the whole solar surface to understand the deep interior, (2) provide vector magnetograms of the whole photosphere - the inner boundary of the solar atmosphere and heliosphere, (3) provide the information of the whole lifetime evolution of solar featured structures, and (4) provide the whole view of solar transients and space weather in the inner heliosphere. With these capabilities, Solar Ring mission aims to address outstanding questions about the origin of solar cycle, the origin of solar eruptions and the origin of extreme space weather events. The successful accomplishment of the mission will construct a panorama of the Sun and inner-heliosphere, and therefore advance our understanding of the star and the space environment that holds our life.

astro-ph.SR↗

arXiv2022

Sigmoid Formation Through Slippage of A Single J-shaped Coronal Loop

A well-known precursor of an imminent solar eruption is the appearance of a hot S-shaped loop, also known as sigmoid, in an active region (AR). Classically, the formation of such an S-shaped loop is envisaged to be implemented by magnetic reconnection of two oppositely oriented J-shaped loops. However, the details of reconnection are elusive due to weak emission and subtle evolution during the pre-eruptive phase. In this paper, we investigate how a single J-shaped loop transforms into an S-shaped one through the slippage of one of its footpoints in NOAA AR 11719 on 2013 April 11. During an interval of about 16 min, the J-shaped loop slips through a low-corona region of strong electric current density in a bursty fashion, reaching a peak apparent speed as fast as over 1000 km s$^{-1}$, at the slipping footpoint. The enhancement of electric current density, as suggested by non-linear force-free field modeling, indicates that the "non-idealness" of coronal plasma becomes locally important, which may facilitate magnetic reconnection. The loop segment undergoing slipping motions is heated; meanwhile, above the fixed footpoint coronal emission dims due to a combination effect of the lengthening and heating of the loop, the latter of which is manifested in the temporal variation of dimming slope and of emission measure. These features together support an asymmetric scenario of sigmoid formation through slipping reconnection of a single J-shaped loop, which differs from the standard tether-cutting scenario involving a double J-shaped loop system.

astro-ph.SR↗

arXiv2022

Acceleration and Expansion of a Coronal Mass Ejection in the High Corona: Role of Magnetic Reconnection

The important role played by magnetic reconnection in the early acceleration of coronal mass ejections (CMEs) has been widely discussed. However, as CMEs may have expansion speeds comparable to their propagation speeds in the corona, it is not clear whether and how reconnection contributes to the true acceleration and expansion separately. To address this question, we analyze the dynamics of a moderately fast CME on 2013 February 27, associated with a continuous acceleration of its front into the high corona, even though its speed had reached $\sim$700~km~s$^{-1}$ and larger than the solar wind speed. The apparent CME acceleration is found to be due to the CME expansion in the radial direction. The CME true acceleration, i.e., the acceleration of its center, is then estimated by taking into account the expected deceleration caused by the solar wind drag force acting on a fast CME. It is found that the true acceleration and the radial expansion have similar magnitudes. We find that magnetic reconnection occurs after the CME eruption and continues during the CME propagation in the high corona, which contributes to the CME dynamic evolution. Comparison between the apparent acceleration related to the expansion and the true acceleration that compensates the drag shows that, for this case, magnetic reconnection contributes almost equally to the CME expansion and to the CME acceleration. The consequences of these measurements for the evolution of CMEs as they transit from the corona to the heliosphere are discussed.

astro-ph.SR↗

arXiv2021

Successive Coronal Mass Ejections Associated with Weak Solar Energetic Particle Events

The scenario of twin coronal mass ejections (CMEs), i.e., a fast and wide primary CME (priCME) preceded by previous CMEs (preCMEs), has been found to be favorable to a more efficient particle acceleration in large solar energetic particle (SEP) events. Here, we study 19 events during 2007--2014 associated with twin-CME eruptions but without large SEP observations at L1 point. We combine remote-sensing and in situ observations from multiple spacecraft to investigate the role of magnetic connectivity in SEP detection and the CME information in 3-dimensional (3D) space. We study one-on-one correlations of the priCME 3D speed, flare intensity, suprathermal backgrounds, and height of CME-CME interaction with the SEP intensity. Among these, the priCME speed is found to correlate with the SEP peak intensity at the highest level. We use the projection correlation method to analyze the correlations between combinations of these multiple independent factors and the SEP peak intensity. We find that the only combination of two or more parameters that has higher correlation with the SEP peak intensity than the CME speed is the CME speed combined with the propagation direction. This further supports the dominant role of the priCME in controlling the SEP enhancements, and emphasizes the consideration of the latitudinal effect. Overall, the magnetic connectivity in longitude as well as latitude and the relatively lower priCME speed may explain the existence of the twin-CME SEP-poor events. The role of the barrier effect of preCME(s) is discussed for an event on 2013 October 28.

astro-ph.SR↗

arXiv2021

Pre-eruption Splitting of the Double-Decker Structure in a Solar Filament

Solar filaments often erupt partially. Although how they split remains elusive, the splitting process has the potential of revealing the filament structure and eruption mechanism. Here we investigate the pre-eruption splitting of an apparently single filament and its subsequent partial eruption on 2012 September 27. The evolution is characterized by three stages with distinct dynamics. During the quasi-static stage, the splitting proceeds gradually for about 1.5 hrs, with the upper branch rising at a few kilometers per second and displaying swirling motions about its axis. During the precursor stage that lasts for about 10 min, the upper branch rises at tens of kilometers per second, with a pair of conjugated dimming regions starting to develop at its footpoints; with the swirling motions turning chaotic, the axis of the upper branch whips southward, which drives an arc-shaped EUV front propagating in the similar direction. During the eruption stage, the upper branch erupts with the onset of a C3.7-class two-ribbon flare, while the lower branch remains stable. Judging from the well separated footpoints of the upper branch from those of the lower one, we suggest that the pre-eruption filament processes a double-decker structure composed of two distinct flux bundles, whose formation is associated with gradual magnetic flux cancellations and converging photospheric flows around the polarity inversion line.

astro-ph.SR↗

arXiv2020

Solar Flare-CME Coupling Throughout Two Acceleration Phases of a Fast CME

Solar flares and coronal mass ejections (CMEs) are closely coupled through magnetic reconnection. CMEs are usually accelerated impulsively within the low solar corona, synchronized with the impulsive flare energy release. We investigate the dynamic evolution of a fast CME and its associated X2.8 flare occurring on 2013 May 13. The CME experiences two distinct phases of enhanced acceleration, an impulsive one with a peak value of ~5 km s$^{-2}$ followed by an extended phase with accelerations up to 0.7 km s$^{-2}$. The two-phase CME dynamics is associated with a two-episode flare energy release. While the first episode is consistent with the "standard" eruption of a magnetic flux rope, the second episode of flare energy release is initiated by the reconnection of a large-scale loop in the aftermath of the eruption and produces stronger nonthermal emission up to $γ$-rays. In addition, this long-duration flare reveals clear signs of ongoing magnetic reconnection during the decay phase, evidenced by extended HXR bursts with energies up to 100--300 keV and intermittent downflows of reconnected loops for >4 hours. The observations reveal that the two-step flare reconnection substantially contributes to the two-phase CME acceleration, and the impulsive CME acceleration precedes the most intense flare energy release. The implications of this non-standard flare/CME observation are discussed.

astro-ph.SR↗

arXiv2019

The Birth of A Coronal Mass Ejection

The Sun's atmosphere is frequently disrupted by coronal mass ejections (CMEs), coupled with flares and energetic particles. In the standard picture, the coupling is explained by magnetic reconnection at a vertical current sheet connecting the flare loops and the CME, with the latter embedding a helical magnetic structure known as flux rope. As it jumps upward due to instabilities or loss of equilibrium, the flux rope stretches the overlying coronal loops so that oppositely directed field is brought together underneath, creating the current sheet. However, both the origin of flux ropes and their nascent paths toward eruption remain elusive. Here we present an observation of how a stellar-sized CME bubble evolves continuously from plasmoids, mini flux ropes that are barely resolved, within half an hour. The eruption initiates when plasmoids springing from a vertical current sheet merge into a leading plasmoid occupying the upper tip of the current sheet. Rising at increasing speed to stretch the overlying loops, this leading plasmoid then expands impulsively into the CME bubble, in tandem with hard X-ray bursts. This observation illuminates for the first time a complete CME evolutionary path that has the capacity to accommodate a wide variety of plasma phenomena by bridging the gap between micro-scale dynamics and macro-scale activities.

astro-ph.SR↗

arXiv2018

Unraveling the Links among Sympathetic Eruptions

Solar eruptions occurring at different places within a relatively short time interval are considered to be sympathetic. However, it is difficult to determine whether there exists a cause and effect between them. Here we study a failed and a successful filament eruption following an X1.8-class flare on 2014 December 20, in which slipping-like magnetic reconnections serve as a key causal link among the eruptions. Reconnection signatures and effects are: at both sides of the filament experiencing the failed eruption, serpentine ribbons extend along chromospheric network to move away from the filament, while a hot loop apparently grows above it; at the filament undergoing the successful eruption, overlying cold loops contract, while coronal dimming appears at both sides even before the filament eruption. These effects are understood by reconnections continually transforming magnetic fluxes overlying one filament to the other, which adjusts how the magnetic field decays with increasing height above the filaments in opposite trends, therefore either strengthening or weakening the magnetic confinement of each filament.

astro-ph.SR↗

arXiv2018

On the Magnetic and Energy Characteristics of Recurrent Homologous Jets from An Emerging Flux

In this paper, we present the detailed analysis of recurrent homologous jets originating from an emerging negative magnetic flux at the edge of an Active Region. The observed jets show multi-thermal features. Their evolution shows high consistence with the characteristic parameters of the emerging flux, suggesting that with more free magnetic energy, the eruptions tend to be more violent, frequent and blowout-like. The average temperature, average electron number density and axial speed are found to be similar for different jets, indicating that they should have been formed by plasmas from similar origins. Statistical analysis of the jets and their footpoint region conditions reveals a strong positive relationship between the footpoint-region total 131 Å intensity enhancement and jets' length/width. Stronger linearly positive relationships also exist between the total intensity enhancement/thermal energy of the footpoint regions and jets' mass/kinetic/thermal energy, with higher cross-correlation coefficients. All the above results, together, confirm the direct relationship between the magnetic reconnection and the jets, and validate the important role of magnetic reconnection in transporting large amount of free magnetic energy into jets. It is also suggested that there should be more free energy released during the magnetic reconnection of blowout than of standard jet events.

astro-ph.SR↗

arXiv2017

Direct Observation of Two-Step Magnetic Reconnection in a Solar Flare

We report observations of an eruptive X2.8 flare on 2013 May 13, which shows two distinct episodes of energy release in the impulsive phase. The first episode is characterized by the eruption of a magnetic flux rope, similar to the energy-release process in most standard eruptive flares. While the second episode, which is stronger than the first normal one and shows enhanced high-energy X-ray and even $γ$-ray emissions, is closely associated with magnetic reconnection of a large-scale loop in the aftermath of the eruption. The reconnection inflow of the loop leg is observed in the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) 304 Å passband and accelerates towards the reconnection region to a speed as high as $\sim$130 km/s. Simultaneously the corresponding outflow jets are observed in the AIA hot passbands with a speed of $\sim$740 km/s and mean temperature of $\sim$14 MK. RHESSI observations show a strong burst of hard X-ray (HXR) and $γ$-ray emissions with hard electron spectra of $δ\approx3$, exhibiting a soft-hard-harder behavior. A distinct altitude decrease of the HXR loop-top source coincides with the inward swing of the loop leg observed in the AIA 304 Å passband, which is suggested to be related to the coronal implosion. This fast inflow of magnetic flux contained in the loop leg greatly enhances the reconnection rate and results in very efficient particle acceleration in the second-step reconnection, which also helps to achieve a second higher temperature peak up to T $\approx$ 30 MK.

astro-ph.SR↗