arXiv subjects

Tobias Dornheim

Publications and source records attributed to Tobias Dornheim.

At least 37 records · Page 2Linked to original sources

arXiv2026

Spectral Deconvolution without the Deconvolution: Extracting Temperature from X-ray Thomson Scattering Spectra without the Source-and-Instrument Function

X-ray Thomson scattering (XRTS) probes the dynamic structure factor of the system, but the measured spectrum is broadened by the combined source-and-instrument function (SIF) of the setup. In order to extract properties such as temperature from an XRTS spectrum, the broadening by the SIF needs to be removed. Recent work [Dornheim et al. Nature Commun. 13, 7911 (2022)] has suggested that the SIF may be deconvolved using the two-sided Laplace transform. However, the extracted information can depend strongly on the shape of the input SIF, and the SIF is in practice challenging to measure accurately. Here, we propose an alternative approach: we demonstrate that considering ratios of Laplace-transformed XRTS spectra collected at different scattering angles is equivalent to performing the deconvolution, but without the need for explicit knowledge of the SIF. From these ratios, it is possible to directly extract the temperature from the scattering spectra, when the system is in thermal equilibrium. We find the method to be generally robust to spectral noise and physical differences between the spectrometers, and we explore situations in which the method breaks down. Furthermore, the fact that consistent temperatures can be extracted for systems in thermal equilibrium indicates that non-equilibrium effects could be identified by inconsistent temperatures of a few eV between the ratios of three or more scattering angles.

physics.plasm-ph↗

arXiv2026

Enhancing the Efficiency of Time-Dependent Density Functional Theory Calculations of Dynamic Response Properties

X-ray Thomson scattering (XRTS) constitutes an essential technique for diagnosing material properties under extreme conditions, such as high pressures and intense laser heating. Time-dependent density functional theory (TDDFT) is one of the most accurate available ab initio methods for modeling XRTS spectra, as well as a host of other dynamic material properties. However, strong thermal excitations, along with the need to account for variations in temperature and density as well as the finite size of the detector significantly increase the computational cost of TDDFT simulations compared to ambient conditions. In this work, we present a broadly applicable method for optimizing and enhancing the efficiency of TDDFT calculations. Our approach is based on a one-to-one mapping between the dynamic structure factor and the imaginary time density--density correlation function, which naturally emerges in Feynman's path integral formulation of quantum many-body theory. Specifically, we combine rigorous convergence tests in the imaginary time domain with a constraints-based attenuation of narrow-band fluctuations to improve the efficiency of TDDFT modeling without the introduction of any significant bias. As a result, we can report a speed-up by up to an order of magnitude, thus substantially reducing the burden of computational cost required for XRTS analysis.

cond-mat.mtrl-sci↗

arXiv2026

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

physics.plasm-ph↗

arXiv2026

Van-der-Waals exchange-correlation functionals and their high pressure and warm dense matter applications

We investigate basic hydrogen quantities like the molecular bond length, the molecular dissociation energy and the van-der-Waals interaction in idealized situations in an effort to discern a suitable exchange-correlation functional for the molecular to metal transition in warm dense hydrogen. The best reproduction of bond length and dissociation energy is given by the r2SCAN functional, several vdW functionals and also HSE06 fair qualitatively and quantitatively no better than PBE or worse. In addition we investigate quantities like the static and dynamic ion structure factor, and the electronic DOS to determine differences between exchange-correlation functionals with and without van-der-Waals corrections in the transition region from the molecular to the metallic regime of hydrogen.

physics.chem-ph↗

arXiv2026

Generalized density functional theory framework for the non-linear density response of quantum many-body systems

A density functional theory (DFT) framework is presented that links functional derivatives of free-energy functionals to non-linear static density response functions in quantum many-body systems. Within this framework, explicit expressions are derived for various higher-order response functions of systems that are homogeneous on average, including the first theoretical result for the cubic response at the first harmonic $χ_0^{(1,3)}(\vec{q})$. Specifically, our framework includes hitherto neglected mode-coupling effects that are important for the non-linear density response even in the presence of a single harmonic perturbation. We compare these predictions for $χ_0^{(1,3)}(\vec{q})$ to new Kohn-Sham DFT simulations, leading to excellent agreement between theory and numerical results. Exact analytical expressions are also obtained for the long-wavelength limits of the ideal quadratic and cubic response functions. Particular emphasis is placed on the connections between the third- and fourth-order functional derivatives of the non-interacting free-energy functional $F_s[n]$ and the ideal quadratic and cubic response functions of the uniform electron gas, respectively. These relations provide exact constraints that may prove useful for the future construction of improved approximations to $F_s[n]$, in particular for warm dense matter applications at finite temperatures. Here, we use this framework to assess several commonly employed approximations to $F_s[n]$ through orbital-free DFT simulations of the harmonically perturbed ideal electron gas. The results are compared with Kohn-Sham DFT calculations across temperatures ranging from the ground state to the warm dense regime. Additionally, we analyze in detail the temperature- and wavenumber-dependent non-monotonic behavior of the ideal quadratic and cubic response functions.

cond-mat.stat-mech↗

arXiv2026

Unlocking the Power of Orbital-Free Density Functional Theory to Explore the Electronic Structure Under Extreme Conditions

Recent advances in X-ray free-electron laser diagnostics have enabled direct probing of the electronic structure under extreme pressures and temperatures, such as those encountered in stellar interiors and inertial confinement fusion experiments, challenging theoretical models for interpreting experimental data. Kohn-Sham density functional theory (KSDFT) has been successfully applied to analyze experimental X-ray scattering measurements, but its high computational cost renders routine application impractical. Orbital-free DFT (OFDFT) is a substantially more efficient alternative, with computational cost scaling linearly with system size and a weak temperature dependence, yet it often lacks the accuracy required for electronic structure description. Overcoming this limitation, we present a non-empirical Kohn-Sham-assisted orbital-free density functional framework for calculations at extreme conditions, which enables efficient OFDFT simulations with KSDFT-level accuracy for electron densities, electron-ion structure factors, and equations of state across a broad range of conditions. Benchmark comparisons with quantum Monte Carlo data for dense hydrogen and validation against Rayleigh weight measurements of hot dense beryllium demonstrate the reliability of the framework and speedups of up to several hundred times compared with KSDFT. We further show that even at temperatures on the order of 100 eV, quantum non-locality remains essential for correctly describing the electronic structure of dense hydrogen.

cond-mat.mtrl-sci↗

arXiv2026

XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF

The imaging platform developed at the High Energy Density - Helmholtz International Beamline for Extreme Fields (HED-HiBEF) instrument at the European XFEL and its applications to high energy density and fusion related research are presented. The platform combines the XFEL beam with the high-intensity short-pulse laser ReLaX and the high-energy nanosecond-pulse laser DiPOLE-100X. The spatial resolution is better than 500 nm and the temporal resolution of the order of 50 fs. We show examples of blast waves and converging cylindrical shocks in aluminium, resonant absorption measurements of specific charged states in copper with ReLaX and planar shocks in polystyrene material generated by DiPOLE-100X. We also discuss the possibilities introduced by combining this imaging platform with a kJ-class laser.

physics.plasm-ph↗

arXiv2026

Correlation function metrology for warm dense matter: Recent developments and practical guidelines

X-ray Thomson scattering (XRTS) has emerged as a valuable diagnostic for matter under extreme conditions, as it captures the intricate many-body physics of the probed sample. Recent advances, such as the model-free temperature diagnostic of Dornheim et al. [Nat.Commun. 13, 7911 (2022)], have demonstrated how much information can be extracted directly within the imaginary-time formalism. However, since the imaginary-time formalism is a concept often difficult to grasp, we provide here a systematic overview of its theoretical foundations and explicitly demonstrate its practical applications to temperature inference, including relevant subtleties. Furthermore, we present recent developments that enable the determination of the absolute normalization, Rayleigh weight, and density from XRTS measurements without reliance on uncontrolled model assumptions. Finally, we outline a unified workflow that guides the extraction of these key observables, offering a practical framework for applying the method to interpret experimental measurements.

physics.plasm-ph↗

arXiv2025

The noiseless limit and improved-prior limit of the maximum entropy method and their implications for the analytic continuation problem

Quantum Monte Carlo (QMC) methods are uniquely capable of providing exact simulations of quantum many-body systems. Unfortunately, the applications of a QMC simulation are limited because extracting dynamic properties requires solving the analytic continuation (AC) problem. Across the many fields that use QMC methods, there is no universally accepted analytic continuation algorithm for extracting dynamic properties, but many publications compare to the maximum entropy method. We investigate when entropy maximization is an acceptable approach. We show that stochastic sampling algorithms reduce to entropy maximization when the Bayesian prior is near to the true solution. We investigate when is Bryan's controversial optimization algorithm [Bryan, Eur. Biophys. J. 18, 165-174 (1990)] for entropy maximization (sometimes known as the maximum entropy method) appropriate to use. We show that Bryan's algorithm is appropriate when the noise is near zero or when the Bayesian prior is near to the true solution. We also investigate the mean squared error, finding a better scaling when the Bayesian prior is near the true solution than when the noise is near zero. We point to examples of improved data-driven Bayesian priors that have already leveraged this advantage. We support these results by solving the double Gaussian problem using both Bryan's algorithm and the newly formulated dual approach to entropy maximization [Chuna et al., J. Phys. A: Math. Theor. 58, 335203 (2025)].

physics.comp-ph↗

arXiv2025

Ab initio density functional theory approach to warm dense hydrogen: from density response to electronic correlations

Understanding the properties of warm dense hydrogen is of key importance for the modeling of compact astrophysical objects and to understand and further optimize inertial confinement fusion (ICF) applications. The work horse of warm dense matter theory is given by thermal density functional theory (DFT), which, however, suffers from two limitations: (i) its accuracy can depend on the utilized exchange--correlation (XC) functional, which has to be approximated and (ii) it is generally limited to single-electron properties such as the density distribution. Here, we present a new ansatz combining time-dependent DFT results for the dynamic structure factor $S_{ee}(\mathbf{q},ω)$ with static DFT results for the density response. This allows us to estimate the electron--electron static structure factor $S_{ee}(\mathbf{q})$ of warm dense hydrogen with high accuracy over a broad range of densities and temperatures. In addition to its value for the study of warm dense matter, our work opens up new avenues for the future study of electronic correlations exclusively within the framework of DFT for a host of applications.

physics.plasm-ph↗

arXiv2025

Dual formulation of the maximum entropy method applied to analytic continuation of quantum Monte Carlo data

Many fields of physics use quantum Monte Carlo techniques, but struggle to estimate dynamic spectra via the analytic continuation of imaginary-time quantum Monte Carlo data. One of the most ubiquitous approaches to analytic continuation is the maximum entropy method (MEM). We supply a dual Newton optimization algorithm to be used within the MEM and provide analytic bounds for the algorithm's error. The MEM is typically used with Bryan's controversial algorithm [Rothkopf, "Bryan's Maximum Entropy Method" Data 5.3 (2020)]. We present new theoretical issues that are not yet in the literature. Our algorithm has all the theoretical benefits of Bryan's algorithm without these theoretical issues. We compare the MEM with Bryan's optimization to the MEM with our dual Newton optimization on test problems from lattice quantum chromodynamics and plasma physics. These comparisons show that in the presence of noise the dual Newton algorithm produces better estimates and error bars; this indicates the limits of Bryan's algorithm's applicability. We use the MEM to investigate authentic quantum Monte Carlo data for the uniform electron gas at warm dense matter conditions and further substantiate the roton-type feature in the dispersion relation.

physics.comp-ph↗

arXiv2025

Taylor series perspective on ab initio path integral Monte Carlo simulations with Fermi-Dirac statistics

The fermion sign problem constitutes a fundamental computational bottleneck across a plethora of research fields in physics, quantum chemistry and related disciplines. Recently, it has been suggested to alleviate the sign problem in \emph{ab initio} path integral Molecular Dynamics and path integral Monte Carlo (PIMC) calculations based on the simulation of fictitious identical particles that are represented by a continuous quantum statistics variable $ξ$ [\textit{J.~Chem.~Phys.}~\textbf{157}, 094112 (2022)]. This idea facilitated a host of applications including the interpretation of an x-ray scattering experiment with strongly compressed beryllium at the National Ignition Facility [\textit{Nature Commun.}~\textbf{16}, 5103 (2025)]. In the present work, we express the original isothermal $ξ$-extrapolation method as a special case of a truncated Taylor series expansion around the $ξ=0$ limit of distinguishable particles. We derive new PIMC estimators that allow us to evaluate the Taylor coefficients up to arbitrary order and we carry out extensive new PIMC simulations of the warm dense electron gas to systematically analyze the sign problem from this new perspective. This gives us important insights into the applicability of the $ξ$-extrapolation method for different levels of quantum degeneracy in terms of the Taylor series radius of convergence. Moreover, the direct PIMC evaluation of the $ξ$-derivatives, in principle, removes the necessity for simulations at different values of $ξ$ and can facilitate more efficient simulations that are designed to maximize compute time in those regions of the full permutation space that contribute most to the final Taylor estimate of the fermionic expectation value of interest.

physics.chem-ph↗

arXiv2025

HEART: A New X-Ray Tracing Code for Mosaic Crystal Spectrometers

We introduce a new open-source Python x-ray tracing code for modelling Bragg diffracting mosaic crystal spectrometers: High Energy Applications Ray Tracer (HEART). HEART's high modularity enables customizable workflows as well as efficient development of novel features. Utilizing Numba's just-in-time (JIT) compiler and the message-passing interface (MPI) allows running HEART in parallel leading to excellent performance. HEART is intended to be used for modelling x-ray spectra as they would be seen in experiments that measure x-ray spectroscopy with a mosaic crystal spectrometer. This enables the user to make predictions about what will be seen on a detector in experiment, perform optimizations on the design of the spectrometer setup, or to study the effect of the spectrometer on measured spectra. However, the code certainly has further uses beyond these example use cases. Here, we discuss the physical model used in the code, and explore a number of different mosaic distribution functions, intrinsic rocking curves, and sampling approaches which are available to the user. Finally, we demonstrate its strong predictive capability in comparison to spectroscopic data collected at the European XFEL in Germany.

physics.plasm-ph↗

arXiv2025

Reweighting scheme for the calculation of grand-canonical expectation values in quantum Monte Carlo simulations with a fermion sign problem

Ab initio path integral Monte Carlo (PIMC) simulations constitute the gold standard for the estimation of a broad range of equilibrium properties of a host of interacting quantum many-body systems spanning conditions from ultracold atoms to warm dense quantum plasmas. A key practical limitation is given by the notorious fermion sign problem, which manifests as an exponential computational bottleneck with respect to system size and inverse temperature. In practice, the sign problem is particularly severe in the grandcanonical ensemble, where the bosonic and fermionic configuration spaces differ not only with respect to the symmetry of the thermal density matrix but, crucially, also with respect to the particle number distribution for a given chemical potential $μ$ [T. Dornheim, J. Phys. A 54, 335001 (2021)]. Here, we present a simple reweighting scheme that basically allows one to retain access to grandcanonical expectation values at the cost of fermionic PIMC simulations in the canonical ensemble for the largest significant particle number in the fermionic sector. As a practical example, we consider the warm dense electron gas, which has attracted considerable recent attention due to its relevance, e.g., for the modeling of compact astrophysical objects and inertial fusion energy applications

physics.chem-ph↗

arXiv2025

Kinetic contribution to the arbitrary order odd frequency moments of the dynamic structure factor

An exact expression is derived for the kinetic contribution to the odd (arbitrary order) frequency moments of the dynamic structure factor via a finite summation that features averages of even (all lower orders) powers of the momentum over the exact momentum distribution. The derivation is carried out for the non-interacting Fermi gas and generalized to the interacting case based on the conjecture that averages over the Fermi distribution can be substituted with averages over the exact distribution. The expression is validated against known results (first, third frequency moments) and new explicit calculations (fifth, seventh frequency moments).

cond-mat.quant-gas↗

arXiv2025

Re-weighting estimator for ab initio path integral Monte Carlo simulations of fictitious identical particles

The fermion sign problem constitutes one of the most fundamental obstacles in quantum many-body theory. Recently, it has been suggested to circumvent the sign problem by carrying out path integral simulations with a fictitious quantum statistics variable $ξ$, which allows for a smooth interpolation between the bosonic and fermionic limits [\textit{J.~Chem.~Phys.}~\textbf{157}, 094112 (2022)]. This $ξ$-extrapolation method has subsequently been applied to a variety of systems and has facilitated the analysis of an x-ray scattering measurement taken at the National Ignition Facility with unprecedented accuracy [\textit{Nature Commun.}~\textbf{16}, 5103 (2025)]. Yet, it comes at the cost of performing an additional $10-20$ simulations, which, in combination with the required small error bars, can pose a serious practical limitation. Here, we remove this bottleneck by presenting a new re-weighting estimator, which allows the study of the full $ξ$-dependence from a single path integral Monte Carlo (PIMC) simulation. This is demonstrated for various observables of the uniform electron gas and also warm dense beryllium. We expect our work to be useful for future PIMC simulations of Fermi systems, including ultracold atoms, electrons in quantum dots, and warm dense quantum plasmas.

physics.chem-ph↗

arXiv2025

Orientational Effects in the Low Pair Continuum of Aluminium

We compare the predictions of the dynamic structure factor (DSF) of ambient polycrystalline aluminium from time-dependent density functional theory (TDDFT) in the pair continuum regime to recent ultrahigh resolution x-ray Thomson scattering measurements, collected at the European XFEL. TDDFT predicts strong anisotropy in the DSF at the wavenumber examined here, even with $q$-blurring accounted for. The experimental spectrum has more than sufficient resolution and signal-to-noise levels to resolve these orientation dependencies, and therefore the orientational averaging of the polycrystalline sample is observed rigorously. Once the orientation averaging is accounted for, TDDFT is able to reproduce the experimental spectrum adequately. Finally, comparisons of predicted DSFs from jellium to experiment demonstrates the importance of accounting for lattice effects in modelling the spectrum from a polycrystal.

cond-mat.mtrl-sci↗

arXiv2025

Accelerated free energy estimation in ab initio path integral Monte Carlo simulations

We present a methodology for accelerating the estimation of the free energy from path integral Monte Carlo simulations by considering an intermediate artificial reference system where interactions are inexpensive to evaluate numerically. Using the spherically averaged Ewald interaction as this intermediate reference system for the uniform electron gas, the interaction contribution for the free energy was evaluated up to 18 times faster than the Ewald-only method. Furthermore, a $ξ$-extrapolation technique was tested and applied to alleviate the fermion sign problem and to resolve the sign for large particle numbers. Combining these two techniques enabled the evaluation of the free energy for a system of 1000 electrons, where both finite-size and statistical errors are below chemical accuracy. The general procedure can be applied to systems relevant for planetary and inertial confinement fusion modeling with low to moderate levels of quantum degeneracy.

physics.chem-ph↗