Searcharxiv⌕ Search

arXiv subjects

Tobias Fehenberger

Publications and source records attributed to Tobias Fehenberger.

27 records · Page 2Linked to original sources
arXiv2018

Multiset-Partition Distribution Matching

Distribution matching is a fixed-length invertible mapping from a uniformly distributed bit sequence to shaped amplitudes and plays an important role in the probabilistic amplitude shaping framework. With conventional constantcomposition distribution matching (CCDM), all output sequences have identical composition. In this paper, we propose multisetpartition distribution matching (MPDM) where the composition is constant over all output sequences. When considering the desired distribution as a multiset, MPDM corresponds to partitioning this multiset into equal-size subsets. We show that MPDM allows to address more output sequences and thus has lower rate loss than CCDM in all nontrivial cases. By imposing some constraints on the partitioning, a constructive MPDM algorithm is proposed which comprises two parts. A variable-length prefix of the binary data word determines the composition to be used, and the remainder of the input word is mapped with a conventional CCDM algorithm, such as arithmetic coding, according to the chosen composition. Simulations of 64-ary quadrature amplitude modulation over the additive white Gaussian noise channel demonstrate that the block-length saving of MPDM over CCDM for a fixed gap to capacity is approximately a factor of 2.5 to 5 at medium to high signal-to-noise ratios (SNRs).

eess.SP↗
arXiv2017

Achievable Information Rates for Fiber Optics: Applications and Computations

In this paper, achievable information rates (AIR) for fiber optical communications are discussed. It is shown that AIRs such as the mutual information and generalized mutual information are good design metrics for coded optical systems. The theoretical predictions of AIRs are compared to the performance of modern codes including low-parity density check (LDPC) and polar codes. Two different computation methods for these AIRs are also discussed: Monte-Carlo integration and Gauss-Hermite quadrature. Closed-form ready-to-use approximations for such computations are provided for arbitrary constellations and the multidimensional AWGN channel. The computation of AIRs in optical experiments and simulations is also discussed.

eess.SP↗
arXiv2017

Experimental Comparison of Probabilistic Shaping Methods for Unrepeated Fiber Transmission

This paper studies the impact of probabilistic shaping on effective signal-to-noise ratios (SNRs) and achievable information rates (AIRs) in a back-to-back configuration and in unrepeated nonlinear fiber transmissions. For back-to-back, various shaped quadrature amplitude modulation (QAM) distributions are found to have the same implementation penalty as uniform input. By demonstrating in transmission experiments that shaped QAM input leads to lower effective SNR than uniform input at a fixed average launch power, we experimentally confirm that shaping enhances the fiber nonlinearities. However, shaping is ultimately found to increase the AIR, which is the most relevant figure of merit as it is directly related to spectral efficiency. In a detailed study of these shaping gains for the nonlinear fiber channel, four strategies for optimizing QAM input distributions are evaluated and experimentally compared in wavelength division multiplexing (WDM) systems. The first shaping scheme generates a Maxwell-Boltzmann (MB) distribution based on a linear additive white Gaussian noise channel. The second strategy uses the Blahut-Arimoto algorithm to optimize an unconstrained QAM distribution for a split-step Fourier method based channel model. In the third and fourth approach, MB-shaped QAM and unconstrained QAM are optimized via the enhanced Gaussian noise (EGN) model. Although the absolute shaping gains are found to be relatively small, the relative improvements by EGN-optimized unconstrained distributions over linear AWGN optimized MB distributions are up to 59%. This general behavior is observed in 9-channel and fully loaded WDM experiments.

cs.IT↗
arXiv2016

On Probabilistic Shaping of Quadrature Amplitude Modulation for the Nonlinear Fiber Channel

Different aspects of probabilistic shaping for a multi-span optical communication system are studied. First, a numerical analysis of the additive white Gaussian noise (AWGN) channel investigates the effect of using a small number of input probability mass functions (PMFs) for a range of signal-to-noise ratios (SNRs), instead of optimizing the constellation shaping for each SNR. It is shown that if a small penalty of at most 0.1 dB SNR to the full shaping gain is acceptable, just two shaped PMFs are required per quadrature amplitude modulation (QAM) over a large SNR range. For a multi-span wavelength division multiplexing (WDM) optical fiber system with 64QAM input, it is shown that just one PMF is required to achieve large gains over uniform input for distances from 1,400 km to 3,000 km. Using recently developed theoretical models that extend the Gaussian noise (GN) model and full-field split-step simulations, we illustrate the ramifications of probabilistic shaping on the effective SNR after fiber propagation. Our results show that, for a fixed average optical launch power, a shaping gain is obtained for the noise contributions from fiber amplifiers and modulation-independent nonlinear interference (NLI), whereas shaping simultaneously causes a penalty as it leads to an increased NLI. However, this nonlinear shaping loss is found to have a relatively minor impact, and optimizing the shaped PMF with a modulation-dependent GN model confirms that the PMF found for AWGN is also a good choice for a multi-span fiber system.

cs.IT↗
arXiv2016

Impact of 4D channel distribution on the achievable rates in coherent optical communication experiments

We experimentally investigate mutual information and generalized mutual information for coherent optical transmission systems. The impact of the assumed channel distribution on the achievable rate is investigated for distributions in up to four dimensions. Single channel and wavelength division multiplexing (WDM) transmission over transmission links with and without inline dispersion compensation are studied. We show that for conventional WDM systems without inline dispersion compensation, a circularly symmetric complex Gaussian distribution is a good approximation of the channel. For other channels, such as with inline dispersion compensation, this is no longer true and gains in the achievable information rate are obtained by considering more sophisticated four-dimensional (4D) distributions. We also show that for nonlinear channels, gains in the achievable information rate can also be achieved by estimating the mean values of the received constellation in four dimensions. The highest gain for such channels is seen for a 4D correlated Gaussian distribution.

cs.IT↗
arXiv2015

Sensitivity Gains by Mismatched Probabilistic Shaping for Optical Communication Systems

Probabilistic shaping of quadrature amplitude modulation (QAM) is used to enhance the sensitivity of an optical communication system. Sensitivity gains of 0.43 dB and 0.8 dB are demonstrated in back-to-back experiments by shaping of 16QAM and 64QAM, respectively. Further, numerical simulations are used to prove the robustness of probabilistic shaping to a mismatch between the constellation used and the signal-to-noise ratio (SNR) of the channel. It is found that, accepting a 0.1 dB SNR penalty, only four shaping distributions are required to support these gains for 64QAM.

cs.IT↗
arXiv2015

Mutual Information as a Figure of Merit for Optical Fiber Systems

Advanced channel decoders rely on soft-decision decoder inputs for which mutual information (MI) is the natural figure of merit. In this paper, we analyze an optical fiber system by evaluating MI as the maximum achievable rate of transmission of such a system. MI is estimated by means of histograms for which the correct bin number is determined in a blind way. The MI estimate obtained this way shows excellent accuracy in comparison with the true MI of 16-state quadrature amplitude modulation (QAM) over an additive white Gaussian noise channel with additional phase noise, which is a simplified model of a nonlinear optical fiber channel. We thereby justify to use the MI estimation method to accurately estimate the MI of an optical fiber system. In the second part of this work, a transoceanic fiber system with 6000 km of standard single-mode fiber is simulated and its MI determined. Among rectangular QAMs, 16-QAM is found to be the optimal modulation scheme for this link as to performance in terms of MI and requirements on components and digital signal processing. For the reported MI of 3.1 bits/symbol, a minimum coding overhead of 29% is required when the channel memory is not taken into account. By employing ideal single-channel digital back-propagation, an increase in MI by 0.25 bits/symbol and 0.28 bits/symbol is reported for 16-QAM and 64-QAM, respectively, lowering the required overhead to 19% and 16%. When the channel spacing is decreased to be close to the Nyquist rate, the dual-polarization spectral efficiency is 5.7 bits/s/Hz, an increase of more than 2 bits/symbol compared to a 50 GHz spacing.

cs.IT↗
arXiv2015

On Achievable Rates for Long-Haul Fiber-Optic Communications

Lower bounds on mutual information (MI) of long-haul optical fiber systems for hard-decision and soft-decision decoding are studied. Ready-to-use expressions to calculate the MI are presented. Extensive numerical simulations are used to quantify how changes in the optical transmitter, receiver, and channel affect the achievable transmission rates of the system. Special emphasis is put to the use of different quadrature amplitude modulation formats, channel spacings, digital back-propagation schemes and probabilistic shaping. The advantages of using MI over the prevailing $Q$-factor as a figure of merit of coded optical systems are also highlighted.

cs.IT↗