arXiv subjects

Tobias Herr

Publications and source records attributed to Tobias Herr.

At least 37 records · Page 2Linked to original sources

arXiv2023

Sideband Injection Locking in Microresonator Frequency Combs

Frequency combs from continuous-wave-driven Kerr-nonlinear microresonators have evolved into a key photonic technology with applications from optical communication to precision spectroscopy. Essential to many of these applications is the control of the comb's defining parameters, i.e., carrier-envelope offset frequency and repetition rate. An elegant and all-optical approach to controlling both degrees of freedom is the suitable injection of a secondary continuous-wave laser into the resonator onto which one of the comb lines locks. Here, we study experimentally such sideband injection locking in microresonator soliton combs across a wide optical bandwidth and derive analytic scaling laws for the locking range and repetition rate control. As an application example, we demonstrate optical frequency division and repetition rate phase-noise reduction to three orders of magnitude below the noise of a free-running system. The presented results can guide the design of sideband injection-locked, parametrically generated frequency combs with opportunities for low-noise microwave generation, compact optical clocks with simplified locking schemes and more generally, all-optically stabilized frequency combs from Kerr-nonlinear resonators.

physics.optics↗

arXiv2023

Synthetic-reflection self-injection-locked microcombs

Laser-driven microresonators have enabled chip-integrated light sources with unique properties, including the self-organized formation of ultrashort soliton pulses and frequency combs (microcombs). While poised to impact major photonic applications, such as spectroscopy, sensing and optical data processing, microcombs still necessitate complex scientific equipment to achieve and maintain suitable single-pulse operation. Here, to address this challenge, we demonstrate microresonators with programmable synthetic reflection providing an injection-feedback to the driving laser. When designed appropriately, synthetic reflection enables deterministic access to self-injection-locked microcombs operating exclusively in the single-soliton regime. These results provide a route to easily-operable microcombs for portable sensors, autonomous navigation, or extreme-bandwidth data processing. The novel concept of synthetic reflection may also be generalized to other integrated photonic systems.

physics.optics↗

arXiv2023

Watt-class CMOS-compatible power amplifier

Power amplifier is becoming a critical component for integrated photonics as the integrated devices try to carve out a niche in the world of real-world applications of photonics. That is because the signal generated from an integrated device severely lacks in power which is due mainly to the small size which, although gives size and weight advantage, limits the energy storage capacity of an integrated device due to the small volume, causing it to rely on its bench-top counterpart for signal amplification downstream. Therefore, an integrated high-power signal booster can play a major role by replacing these large solid-state and fiber-based benchtop systems. For decades, large mode area (LMA) technology has played a disruptive role by increasing the signal power and energy by orders of magnitude in the fiber-based lasers and amplifiers. Thanks to the capability of LMA fiber to support significantly larger optical modes the energy storage and handling capability has significantly increased. Such an LMA device on an integrated platform can play an important role for high power applications. In this work, we demonstrate LMA waveguide based CMOS compatible watt-class power amplifier with an on-chip output power reaching ~ 1W within a footprint of ~4mm2.The power achieved is comparable and even surpasses many fiber-based amplifiers. We believe this work opens up opportunities for integrated photonics to find real world application on-par with its benchtop counterpart.

physics.optics↗

arXiv2023

Chip-scale, CMOS-compatible, high energy passively Q-switched laser

Chip-scale, high-energy optical pulse generation is becoming increasingly important as we expand activities into hard to reach areas such as space and deep ocean. Q-switching of the laser cavity is the best known technique for generating high-energy pulses, and typically such systems are in the realm of large bench-top solid-state lasers and fiber lasers, especially in the long wavelength range >1.8 um, thanks to their large energy storage capacity. However, in integrated photonics, the very property of tight mode confinement, that enables a small form factor, becomes an impediment to high energy application due to small optical mode cross-section. In this work, we demonstrate complementary metal-oxide-semiconductor (CMOS) compatible, rare-earth gain based large mode area (LMA) passively Q-switched laser in a compact footprint. We demonstrate high on-chip output pulse energy of >150 nJ in single transverse fundamental mode in the eye-safe window (1.9 um), with a slope efficiency ~ 40% in a footprint of ~9 mm2. The high energy pulse generation demonstrated in this work is comparable or in many cases exceeds Q-switched fiber lasers. This bodes well for field applications in medicine and space.

physics.optics↗

arXiv2022

Soliton Pulses in Photonic Crystal Fabry-Perot Microresonators

Dissipative Kerr solitons (DKSs) in high-Q microresonators enable applications in sensing, communication, and signal processing. Until now, DKSs driven by continuous-wave (CW) lasers are exclusively generated in ring-type resonators. Complementary to ring-type resonators, Fabry-Perot resonators could enable new approaches to dispersion engineering, addressing a key challenge of DKS technology. However, DKS generation in a CW-driven Fabry-Perot microresonator has not yet been achieved. Here, we demonstrate for the first time CW-driven DKSs in a high-Q Fabry-Perot microresonator. Fabricated in a wafer-level process, two photonic crystal reflectors in a waveguide form the chip-integrated resonator and define its dispersion. The intrinsic Q-factor of 4 million is propagation-loss limited. In principle, each cell of the photonic crystal reflector can be tailored, opening a design space beyond traditional dispersion engineering, with potential for future extension of DKSs to visible and other currently inaccessible wavelengths. Beyond DKSs, this creates opportunities for filter-driven pulse formation, engineered spectra and broadband phase-matching in microresonators.

physics.optics↗

arXiv2021

1 GHz dual-comb spectrometer for fast and broadband measurements

Dual-frequency comb spectroscopy permits broadband precision spectroscopic measurements with short acquisition time. A dramatic improvement of the maximal spectral bandwidth and the minimal measurement time can be expected when the lasers' pulse repetition rate is increased, owing to a quadratic dependence (Nyquist criterion). Here, we demonstrate a dual-comb system operating at a high repetition rate of 1 GHz based on mature, digitally-controlled, low-noise mode-locked lasers. Compared to conventional lower repetition rate ($\sim$100 MHz) oscillators, this represents a 100-fold improvement in terms of the Nyquist criterion, while still providing adequate spectral sampling even for trace gas absorption fingerprints. Two spectroscopy experiments are performed with acquisition parameters not attainable in a 100 MHz system: detection of water vapor absorption around 1375 nm, demonstrating the potential for fast and ambiguity-free broadband operation, and real-time acquisition of narrow gas absorption features across a spectral span of 0.6 THz (600 comb lines) in only 5 $μ$s. Additionally, we show high mutual coherence of the lasers below the Hz-level, generating opportunities for broadband spectroscopy even with low-bandwidth detectors such as mid-infrared, imaging or photo-acoustic detectors.

physics.optics↗

arXiv2021

A Kerr Polarization Controller

Kerr-effect-induced changes of the polarization state of light are well known in pulsed laser systems. An example is nonlinear polarization rotation, which is critical to the operation of many types of mode-locked lasers. Here, we demonstrate that the Kerr effect in a high-finesse Fabry-Pérot resonator can be utilized to control the polarization of a continuous wave laser. It is shown that a linearly-polarized input field is converted into a left- or right-circularly-polarized field, controlled via the optical power. The observations are explained by Kerr-nonlinearity induced symmetry breaking, which splits the resonance frequencies of degenerate modes with opposite polarization handedness in an otherwise symmetric resonator. The all-optical polarization control is demonstrated at threshold powers down to 7 mW. The physical principle of such Kerr effect-based polarization controllers is generic to high-Q Kerr-nonlinear resonators and could also be implemented in photonic integrated circuits. Beyond polarization control, the spontaneous symmetry breaking of polarization states could be used for polarization filters or highly sensitive polarization sensors when operated close to the symmetry-breaking point.

physics.optics↗

arXiv2020

Photo-acoustic dual-frequency comb spectroscopy

Photo-acoustic spectroscopy (PAS) is one of the most sensitive non-destructive analysis techniques for gases, fluids and solids. It can operate background-free at any wavelength and is applicable to microscopic and even non-transparent samples. Extension of PAS to broadband wavelength coverage is a powerful tool, though challenging to implement without sacrifice of wavelength resolution and acquisition speed. Here, we show that the unmatched precision, speed and wavelength coverage of dual-frequency comb spectroscopy (DCS) can be combined with the advantages of photo-acoustic detection. Acoustic wave interferograms are generated in the sample by dual-comb absorption and detected by a microphone. As an example, weak gas absorption features are precisely and rapidly sampled; long-term coherent averaging further increases the sensitivity. This novel approach of photo-acoustic dual-frequency comb spectroscopy generates unprecedented opportunities for rapid and sensitive multi-species molecular analysis across all wavelengths of light.

physics.optics↗

arXiv2020

Heteronuclear soliton molecules in optical microresonators

Optical soliton molecules are bound states of solitons that arise from the balance between attractive and repulsive effects. Having been observed in systems ranging from optical fibers to mode-locked lasers, they provide insights into the fundamental interactions between solitons and the underlying dynamics of the nonlinear systems. Here, we enter the multistability regime of a Kerr microresonator to generate superpositions of distinct soliton states that are pumped at the same optical resonance, and report the discovery of heteronuclear dissipative Kerr soliton molecules. Ultrafast electrooptical sampling reveals the tightly short-range bound nature of such soliton molecules, despite comprising dissipative Kerr solitons of dissimilar amplitudes, durations and carrier frequencies. Besides the significance they hold in resolving soliton dynamics in complex nonlinear systems, such heteronuclear soliton molecules yield coherent frequency combs whose unusual mode structure may find applications in metrology and spectroscopy.

physics.optics↗

arXiv2020

Photonic chip-based resonant supercontinuum

Supercontinuum generation in optical fibers is one of the most dramatic nonlinear effects discovered, allowing short pulses to be converted into multi-octave spanning coherent spectra. However, generating supercontinua that are both coherent and broadband requires pulses that are simultaneously ultrashort with high peak power. This results in a reducing efficiency with increasing pulse repetition rate, that has hindered supercontinua at microwave line spacing, i.e. 10s of GHz. Soliton microcombs by contrast, can generate octave-spanning spectra, but with good conversion efficiency only at vastly higher repetition rates in the 100s of GHz. Here, we bridge this efficiency gap with resonant supercontinuum, allowing supercontinuum generation using input pulses with an ultra-low 6 picojoule energy, and duration of 1 picosecond, 10-fold longer than what is typical. By applying synchronous pulse-driving to a dispersion-engineered, low-loss Si$_3$N$_4$ photonic chip microresonator, we generate dissipative Kerr solitons with a strong dispersive wave, both bound to the input pulse. This creates a smooth, flattened 2,200 line frequency comb, with an electronically detectable repetition rate of 28 GHz, constituting the largest bandwidth-line-count product for any microcomb generated to date. Strikingly, we observe that solitons exist in a weakly bound state with the input pulse, stabilizing their repetition rate, but simultaneously allowing noise transfer from one to the other to be suppressed even for offset frequencies 100 times lower than the linear cavity decay rate. We demonstrate that this nonlinear filtering can be enhanced by pulse-driving asynchronously, in order to preserve the coherence of the comb. Taken together, our work establishes resonant supercontinuum as a promising route to broadband and coherent spectra.

physics.optics↗

arXiv2019

Nonlinear filtering of an optical pulse train using dissipative Kerr solitons

The capability to store light for extended periods of time enables optical cavities to act as narrow-band optical filters, whose linewidth corresponds to the cavity's inverse energy storage time. Here, we report on nonlinear filtering of an optical pulse train based on temporal dissipative Kerr solitons in microresonators. Our experimental results in combination with analytical and numerical modelling show that soliton dynamics enables storing information about the system's physical state longer than the cavity's energy storage time, thereby giving rise to a filter width that can be more than an order of magnitude below the cavity's intrinsic linewidth. Such nonlinear optical filtering can find immediate applications in optical metrology, low-timing jitter ultra-short optical pulse generation and potentially opens new avenues for microwave photonics.

physics.optics↗

arXiv2019

Visible blue-to-red 10 GHz frequency comb via on-chip triple-sum frequency generation

A broadband visible blue-to-red, 10 GHz repetition rate frequency comb is generated by combined spectral broadening and triple-sum frequency generation in an on-chip silicon nitride waveguide. Ultra-short pulses of 150 pJ pulse energy, generated via electro-optic modulation of a 1560 nm continuous-wave laser, are coupled to a silicon nitride waveguide giving rise to a broadband near-infrared supercontinuum. Modal phase matching inside the waveguide allows direct triple-sum frequency transfer of the near-infrared supercontinuum into the visible wavelength range covering more than 250 THz from below 400 nm to above 600 nm wavelength. This scheme directly links the mature optical telecommunication band technology to the visible wavelength band and can find application in astronomical spectrograph calibration as well as referencing of continuous-wave lasers.

physics.optics↗

arXiv2018

Broadband near-infrared astronomical spectrometer calibration and on-sky validation with an electro-optic laser frequency comb

The quest for extrasolar planets and their characterisation as well as studies of fundamental physics on cosmological scales rely on capabilities of high-resolution astronomical spectroscopy. A central requirement is a precise wavelength calibration of astronomical spectrographs allowing for extraction of subtle wavelength shifts from the spectra of stars and quasars. Here, we present an all-fibre, 400 nm wide near-infrared frequency comb based on electro-optic modulation with 14.5 GHz comb line spacing. Tests on the high-resolution, near-infrared spectrometer GIANO-B show a photon-noise limited calibration precision of <10 cm/s as required for Earth-like planet detection. Moreover, the presented comb provides detailed insight into particularities of the spectrograph such as detector inhomogeneities and differential spectrograph drifts. The system is validated in on-sky observations of a radial velocity standard star (HD221354) and telluric atmospheric absorption features. The advantages of the system include simplicity, robustness and turn-key operation, features that are valuable at the observation sites.

physics.optics↗

arXiv2018

Frequency comb up- and down-conversion in a synchronously-driven $χ^{(2)}$ optical microresonator

Optical frequency combs are key to optical precision measurements. While most frequency combs operate in the near-infrared regime, many applications require combs at mid-infrared, visible or even ultra-violet wavelengths. Frequency combs can be transferred to other wavelengths via nonlinear optical processes, however, this becomes exceedingly challenging for high-repetition rate frequency combs. Here, it is demonstrated that a synchronously driven high-Q microresonator with a second-order optical nonlinearity can efficiently convert high-repetition rate near-infrared frequency combs to visible, ultra-violet and mid-infrared wavelengths providing new opportunities for microresonator and electro-optic combs in applications including molecular sensing, astronomy, and quantum optics.

physics.optics↗

arXiv2016

Temporal Solitons in Microresonators driven by Optical Pulses

Continuous-wave laser driven Kerr-nonlinear, optical microresonators have enabled a variety of novel applications and phenomena including the generation of optical frequency combs, ultra-low noise microwaves, as well as, ultra-short optical pulses. In this work we break with the paradigm of the continuous-wave optical drive and use instead periodic, pico-second optical pulses. We observe the deterministic generation of stable femtosecond dissipative cavity solitons on-top of the resonantly enhanced driving pulse. Surprisingly, the soliton pulse locks to the driving pulse enabling direct all-optical control of both the soliton's repetition rate and carrier-envelope offset frequency without the need for any actuation on the microresonator. When compared to both continuous-wave driven microresonators and non-resonant pulsed supercontinuum generation, this new approach is substantially more efficient and can yield broadband frequency combs at femto-Joule driving pulse energies and average laser powers significantly below the parametric threshold power of continuous-wave driven microresonators. The presented results bridge the fields of continuous-wave driven resonant and pulse-driven non-resonant nonlinear optics. They enables micro-photonic pulse compression, ultra-efficient low noise frequency comb and resonant supercontinuum generation for applications including optical data transfer and optical spectroscopy. From a scientific perspective the results open a new horizon for nonlinear photonics driven by temporally and spectrally structured light.

physics.optics↗

arXiv2015

Photonic chip based optical frequency comb using soliton induced Cherenkov radiation

By continuous wave pumping of a dispersion engineered, planar silicon nitride microresonator, continuously circulating, sub-30fs short temporal dissipative solitons are generated, that correspond to pulses of 6 optical cycles and constitute a coherent optical frequency comb in the spectral domain. Emission of soliton induced Cherenkov radiation caused by higher order dispersion broadens the spectral bandwidth to 2/3 of an octave, sufficient for self referencing, in excellent agreement with recent theoretical predictions and the broadest coherent microresonator frequency comb generated to date. In a further step, this frequency comb is fully phase stabilized. The ability to preserve coherence over a broad spectral bandwidth using soliton induced Cherenkov radiation marks a critical milestone in the development of planar optical frequency combs, enabling on one hand application in e.g. coherent communications, broadband dual comb spectroscopy and Raman spectral imaging, while on the other hand significantly relaxing dispersion requirements for broadband microresonator frequency combs and providing a path for their generation in the visible and UV. Our results underscore the utility and effectiveness of planar microresonator frequency comb technology, that offers the potential to make frequency metrology accessible beyond specialized laboratories.

physics.optics↗

arXiv2015

Dissipative Kerr solitons in optical microresonators

This chapter describes the discovery and stable generation of temporal dissipative Kerr solitons in continuous-wave (CW) laser driven optical microresonators. The experimental signatures as well as the temporal and spectral characteristics of this class of bright solitons are discussed. Moreover, analytical and numerical descriptions are presented that do not only reproduce qualitative features but can also be used to accurately model and predict the characteristics of experimental systems. Particular emphasis lies on temporal dissipative Kerr solitons with regard to optical frequency comb generation where they are of particular importance. Here, one example is spectral broadening and self-referencing enabled by the ultra-short pulsed nature of the solitons. Another example is dissipative Kerr soliton formation in integrated on-chip microresonators where the emission of a dispersive wave allows for the direct generation of unprecedentedly broadband and coherent soliton spectra with smooth spectral envelope.

physics.optics↗

arXiv2014

Coherent terabit communications with microresonator Kerr frequency combs

Optical frequency combs enable coherent data transmission on hundreds of wavelength channels and have the potential to revolutionize terabit communications. Generation of Kerr combs in nonlinear integrated microcavities represents a particularly promising option enabling line spacings of tens of GHz, compliant with wavelength-division multiplexing (WDM) grids. However, Kerr combs may exhibit strong phase noise and multiplet spectral lines, and this has made high-speed data transmission impossible up to now. Recent work has shown that systematic adjustment of pump conditions enables low phase-noise Kerr combs with singlet spectral lines. Here we demonstrate that Kerr combs are suited for coherent data transmission with advanced modulation formats that pose stringent requirements on the spectral purity of the optical source. In a first experiment, we encode a data stream of 392 Gbit/s on subsequent lines of a Kerr comb using quadrature phase shift keying (QPSK) and 16-state quadrature amplitude modulation (16QAM). A second experiment shows feedback-stabilization of a Kerr comb and transmission of a 1.44 Tbit/s data stream over a distance of up to 300 km. The results demonstrate that Kerr combs can meet the highly demanding requirements of multi-terabit/s coherent communications and thus offer a solution towards chip-scale terabit/s transceivers.

physics.optics↗