Searcharxiv⌕ Search

arXiv subjects

Tobias J. Kippenberg

Publications and source records attributed to Tobias J. Kippenberg.

186 records · Page 11Linked to original sources

Optomechanical coupling in a two-dimensional photonic crystal defect cavity

Periodically structured materials can sustain both optical and mechanical modes. Here we investigate and observe experimentally the optomechanical properties of a conventional two-dimensional suspended photonic crystal defect cavity with a mode volume of $\sim$$3(λ/n)^{3}$. Two families of mechanical modes are observed: flexural modes, associated to the motion of the whole suspended membrane, and localized modes with frequencies in the GHz regime corresponding to localized phonons in the optical defect cavity of diffraction-limited size. We demonstrate direct measurements of the optomechanical vacuum coupling rate using a frequency calibration technique. The highest measured values exceed 250 kHz, demonstrating strong coupling of optical and mechanical modes in such structures.

physics.optics↗

Optomechanical sideband cooling of a micromechanical oscillator close to the quantum ground state

Cooling a mesoscopic mechanical oscillator to its quantum ground state is elementary for the preparation and control of low entropy quantum states of large scale objects. Here, we pre-cool a 70-MHz micromechanical silica oscillator to an occupancy below 200 quanta by thermalizing it with a 600-mK cold 3He gas. Two-level system induced damping via structural defect states is shown to be strongly reduced, and simultaneously serves as novel thermometry method to independently quantify excess heating due to the cooling laser. We demonstrate that dynamical backaction sideband cooling can reduce the average occupancy to 9+-1 quanta, implying that the mechanical oscillator can be found (10+- 1)% of the time in its quantum ground state.

quant-ph↗

Determination of the vacuum optomechanical coupling rate using frequency noise calibration

The strength of optomechanical interactions in a cavity optomechanical system can be quantified by a vacuum coupling rate $\vcr$ analogous to cavity quantum electrodynamics. This single figure of merit removes the ambiguity in the frequently quoted coupling parameter defining the frequency shift for a given mechanical displacement, and the effective mass of the mechanical mode. Here we demonstrate and verify a straightforward experimental technique to derive the vacuum optomechanical coupling rate. It only requires applying a known frequency modulation of the employed electromagnetic probe field and knowledge of the mechanical oscillator's occupation. The method is experimentally verified for a micromechanical mode in a toroidal whispering-gallery-resonator and a nanomechanical oscillator coupled to a toroidal cavity via its near field.

quant-ph↗

Cavity optomechanics with whispering-gallery-mode optical micro-resonators

Parametric coupling of optical and mechanical degrees of freedom forms the basis of many ultra-sensitive measurements of both force and mechanical displacement. An optical cavity with a mechanically compliant boundary enhances the optomechanical interaction, but also gives rise to qualitatively new coupled dynamics. As early as 1967, in a pioneering work, V. Braginsky analyzed theoretically the role of radiation pressure in the interferometric measurement process, but it has remained experimentally unexplored for many decades. Here, we use whispering-gallery-mode (WGM) optical microresonators to study these radiation pressure phenomena. Optical microresonators simultaneously host optical and mechanical modes, which are systematically analyzed and optimized to feature ultra-low mechanical dissipation, photon storage times exceeding the mechanical oscillation period (i.e. the "resolved-sideband regime") and large optomechanical coupling. It is demonstrated that dynamical backaction can be employed to cool mechanical modes, i.e., to reduce their thermally excited random motion. Utilizing this novel technique together with cryogenic pre-cooling of the mechanical oscillator, the phonon occupation of mechanical radial-breathing modes could be reduced to about 60 excitation quanta. The corresponding displacement fluctuations are monitored interferometrically with a sensitivity at the level of 10^-18 m/Hz^(1/2), which is below the imprecision at the standard quantum limit (SQL). It is shown that optical measurement techniques employed here are operating in a near-ideal manner according to the principles of quantum measurement, displaying a backaction-imprecision product close to the quantum limit. An outlook on optomechanical experiments with crystalline WGM resonators and the effect of "optomechanically induced transparency" (analogous to electromagnetically induced transparency) is given.

quant-ph↗

Cryogenic properties of optomechanical silica microcavities

We present the optical and mechanical properties of high-Q fused silica microtoroidal resonators at cryogenic temperatures (down to 1.6 K). A thermally induced optical multistability is observed and theoretically described; it serves to characterize quantitatively the static heating induced by light absorption. Moreover the influence of structural defect states in glass on the toroid mechanical properties is observed and the resulting implications of cavity optomechanical systems on the study of mechanical dissipation discussed.

quant-ph↗

Theoretical and experimental study of stimulated and cascaded Raman scattering in ultra-high-Q optical microcavities

Stimulated Raman scattering (SRS) in ultra-high-Q surface-tension-induced spherical and chip-based toroid microcavities is considered both theoretically and experimentally. These microcavities are fabricated from silica, exhibit small mode volume (typically 1000 $μm^{3}$) and possess whispering-gallery type modes with long photon storage times (in the range of 100 ns), significantly reducing the threshold for stimulated nonlinear optical phenomena. Oscillation threshold levels of less than 100 $μ$% -Watts of launched fiber pump power, in microcavities with quality factors of 100 million are observed. Using a steady state analysis of the coupled-mode equations for the pump and Raman whispering-gallery modes, the threshold, efficiencies and cascading properties of SRS in UHQ devices are derived. The results are experimentally confirmed in the telecommunication band (1550nm) using tapered optical fibers as highly efficient waveguide coupling elements for both pumping and signal extraction. The device performance dependence on coupling, quality factor and modal volume are measured and found to be in good agreement with theory. This includes analysis of the threshold and efficiency for cascaded Raman scattering. The side-by-side study of nonlinear oscillation in both spherical microcavities and toroid microcavities on-a-chip also allows for comparison of their properties. In addition to the benefits of a wafer-scale geometry, including integration with optical, electrical or mechanical functionality, microtoroids on-a-chip exhibit single mode Raman oscillation over a wide range of pump powers.

physics.optics↗