arXiv subjects

Tobias Tolle

Publications and source records attributed to Tobias Tolle.

10 recordsLinked to original sources

arXiv2025

Experimental and Numerical Study of Microcavity Filling Regimes for Lab-on-a-Chip Applications

The efficient and voidless filling of microcavities is of great importance for Lab-on-a-Chip applications. However, predicting whether microcavities will be filled or not under different circumstances is still difficult due to the local flow effects dominated by surface tension. In this work, a close-up study of the microcavity filling process is presented, shedding light on the mechanisms of the filling process using experimental insights accompanied by 3D numerical simulations. The movement of a fluid interface over a microcavity array is investigated optically under consideration of different fluids, capillary numbers, and cavity depths, revealing a regime map of different filling states. Moreover, the transient interface progression over the cavities is analyzed with attention to small-scale effects such as pinning. Besides the visual analysis of the image series, quantitative data of the dynamic contact angle and the interface progression is derived using an automated evaluation workflow. In addition to the experiments, 3D Volume-of-Fluid simulations are employed to further investigate the interface shape. It is shown that the simulations can not only predict the filling states in most cases, but also the transient movement and shape of the interface. The data and code associated with this work are publicly available at Bosch Research GitHub and at the TUDatalib data repository.

physics.flu-dyn↗

arXiv2025

Inconsistencies in Unstructured Geometric Volume-of-Fluid Methods for Two-Phase Flows with High Density Ratios

Geometric flux-based Volume-of-Fluid (VOF) methods are widely considered consistent in handling two-phase flows with high density ratios. However, although the conservation of mass and momentum is consistent for two-phase incompressible single-field Navier-Stokes equations without phase-change, discretization may easily introduce small inconsistencies that result in very large errors or catastrophic failure. We apply the consistency conditions derived for the unstructured Level Set / Front Tracking method to flux-based geometric VOF methods, and implement our discretization into the plicRDF-isoAdvector geometrical VOF method. We find that computing the mass flux by scaling the geometrically computed fluxed phase-specific volume destroys the equivalence between the scaled volume fraction equation and the mass conservation equation, depending on the choice for the temporal and convective term discretization schemes. We propose two solutions. First, based on the analysis of discretization errors, we suggest a consistent combination of the temporal discretization scheme and the interpolation scheme for the momentum convection term. Second, similar to our previous work on the unstructured Level Set / Front Tracking method, we solve an auxiliary mass conservation equation with a geometrical calculation of the face-centered density. We prove the equivalence between these two approaches mathematically and verify and validate their numerical stability for density ratios in the range $[1,10^6]$ and viscosity ratios in the range $[10^2,10^5]$.

physics.comp-ph↗

arXiv2024

Fluid wetting and penetration characteristics in T-shaped microchannels

A thorough understanding of media tightness in automotive electronics is crucial for ensuring more reliable and compact product designs, ultimately improving product quality. Concerning the fundamental characteristics of fluid leakage issues, the dynamic wetting and penetration behavior on small scales is of special interest and importance. In this work, four T-shaped microchannels with one inlet and two outlets are experimentally investigated in terms of contact angle dynamics and interface movement over time, generating novel insight into the wetting mechanisms and fluid distribution. With a main channel width of 1 mm, a crevice width of w = 0.3 mm, 0.4 mm and a rounding edge radius of r = 0.1 mm, 0.2 mm, the geometrical effects on the fluid penetration depth in the crevice and the interface edge pinning effect are analyzed quantitatively using an automated image processing procedure. It is found that the measured dynamic contact angles in all parts can be well described by molecular kinetic theory using local contact line velocities, even with local surface effects and abrupt geometry changes. Moreover, a smaller crevice width, a sharper edge and a larger flow velocity tend to enhance the interface pinning effect and prevent fluid penetration into the crevice. The rounding radius has a more significant effect on the interface pinning compared with crevice width. The experimental data and image processing algorithm are made publicly available.

physics.flu-dyn↗

arXiv2024

Experimental study of dynamic wetting behavior through curved microchannels with automated image analysis

Preventing fluid penetration poses a challenging reliability concern in the context of power electronics, which is usually caused by unforeseen microfractures along the sealing joints. A better and more reliable product design heavily depends on the understanding of the dynamic wetting processes happening inside these complex microfractures, i.e. microchannels. A novel automated image processing procedure is proposed in this work for analyzing the moving interface and the dynamic contact angle in microchannels. In particular, the developed method is advantageous for experiments involving non-transparent samples, where extracting the fluid interface geometry poses a significant challenge. The developed method is validated with theoretical values and manual measurements and exhibits high accuracy. The implementation is made publicly available. The developed method is validated and applied to experimental investigations of forced wetting with two working fluids (water and 50 wt% glycerin/water mixture) in four distinct microchannels characterized by different dimensions and curvature. The comparison between the experimental results and molecular kinetic theory (MKT) reveals that the dynamic wetting behavior can be described well by MKT, even in highly curved microchannels. The dynamic wetting behavior shows a strong dependency on the channel geometry and curvature.

physics.flu-dyn↗

arXiv2024

An unstructured finite-volume level set / front tracking method for two-phase flows with large density-ratios

We extend the unstructured LEvel set / froNT tracking (LENT) method for handling two-phase flows with strongly different densities (high-density ratios) by providing the theoretical basis for the numerical consistency between the mass and momentum conservation in the collocated Finite Volume discretization of the single-field two-phase Navier-Stokes equations. Our analysis provides the theoretical basis for the mass conservation equation introduced by Ghods and Herrmann [3] and used in [4, 5, 6, 7, 8]. We use a mass flux that is consistent with mass conservation in the implicit Finite Volume discretization of the two-phase momentum convection term, and solve the single-field Navier-Stokes equations with our SAAMPLE segregated solution algorithm [2]. The proposed $ρ$LENT method recovers exact numerical stability for the two-phase momentum advection of a spherical droplet with density ratios ranging in $[1, 10^4]$. Numerical stability is demonstrated for in terms of the relative $L_\infty$ velocity error norm, for density-ratios in the range of $[1, 10^4]$, dynamic viscosity-ratios in the range of $[1, 10^4]$ and very strong surface tension forces, for challenging mercury/air and water/air fluid pairings. In addition, the solver performs well in cases characterized by strong interaction between two phases, i.e., oscillating droplets and rising bubbles. The proposed $ρ$LENT method is applicable to any other two-phase flow simulation method that discretizes the single-field two-phase Navier-Stokes Equations using the collocated unstructured Finite Volume Method but does not solve an advection equation for the phase indicator using a flux-based approach, by adding the proposed geometrical approximation of the mass flux and the auxiliary mass conservation equation to the solution algorithm.

physics.flu-dyn↗

arXiv2024

A residual-based non-orthogonality correction for force-balanced unstructured Volume-of-Fluid methods

Non-orthogonality errors in unstructured Finite Volume methods for simulating incompressible two-phase flows may break the force-balanced discretization. We show that applying the same explicit non-orthogonality correction for all gradient terms in the context of segregated solution algorithms is not sufficient to achieve force balance. To ensure force balance, we introduce a straightforward and deterministic residual-based control of the non-orthogonality correction, which removes the number of non-orthogonality corrections as a free parameter from the simulation. Our method is directly applicable to different unstructured finite-volume two-phase flow simulation methods as long as they discretize the one-field formulation of incompressible two-phase Navier-Stokes equations. We demonstrate force balance for the surface tension force and the gravity force near linear solver tolerance for an algebraic and a geometric Volume-of-Fluid method using the stationary droplet and stationary water column verification cases on polyhedral unstructured meshes with varying levels of non-orthogonality.

physics.comp-ph↗

arXiv2024

Stabilizing the unstructured Volume-of-Fluid method for capillary flows in microstructures using artificial viscosity

Parasitic currents still pose a significant challenge for the investigation of two-phase flow in Lab-on-Chip (LoC) applications with Volume-of-Fluid (VoF) simulations. To counter the impact of such spurious velocity fields in the vicinity of the fluid interface, this work presents an implementation of an artificial interface viscosity model in OpenFOAM. The model is introduced as an additional dampening term in the momentum conservation equation. It is implemented as a fvOption, allowing for its simple application to existing VoF solvers. Validation is performed with hydrodynamic and wetting cases, in which constant artificial viscosity values are prescribed to examine the sensitivity of the solution to the artificial dampening. The artificial viscosity model shows promising results in reducing spurious currents for two considered geometrical VoF solvers, namely interIsoFoam and InterFlow. It is found that the influence of the artificial viscosity heavily depends on the fluid properties. Applying the model to simulations of an interface traversing through microcavities relevant in LoC applications, experimental results of the interface progression are predicted well, while spurious currents are effectively reduced by approximately one order of magnitude due to the artificial viscosity model. The code is publicly available on GitHub (https://github.com/boschresearch/sepMultiphaseFoam/tree/publications/ArtificialInterfaceViscosity).

physics.flu-dyn↗

arXiv2022

A benchmark for surface-tension-driven incompressible two-phase flows

The Volume-of-Fluid (VoF) method for simulating incompressible two-phase flows is widespread in academic and commercial simulation software because of its many advantages: a high degree of volume conservation, applicability to unstructured domain discretization (relevant for engineering applications), straightforward parallel implementation with the domain-decomposition and message-passing approach (important for large-scale simulations), and intrinsic handling of strong deformations and topological changes of the fluid interface. However, stable and accurate handling of small-scale capillary flows (dominated by surface tension forces) is still challenging for VoF methods. With many different VoF methods making their way into commercial and open-source software, it becomes increasingly important to compare them quantitatively and directly. For this purpose, we propose a set of simulation benchmarks and use them to directly compare VoF methods available in OpenFOAM, Basilisk, and Ansys Fluent. We use Jupyter notebooks to document and process the benchmark results, making a direct comparison of our results with other two-phase simulation methods very straightforward. The publicly available input data, secondary benchmark data, and post-processing Jupyter notebooks can be re-used by any two-phase flow simulation method that discretizes two-phase Navier-Stokes equations in a one-fluid formulation, which can save a significant amount of person-hours.

physics.flu-dyn↗

arXiv2022

Computing volume fractions and signed distances from triangulated surfaces immersed in unstructured meshes

Available algorithms for the initialization of volume fractions typically utilize exact functions to model fluid interfaces, or they rely on computationally costly intersections between volume meshes. Here, a new algorithm is proposed that computes signed distances and volume fractions on unstructured meshes from arbitrarily shaped surfaces, e.g. originating from experimental data. The proposed algorithm calculates signed distances geometrically near the fluid interface, approximated as a triangle surface mesh, and propagates the inside/outside information by an approximate solution of a Laplace equation. Volume fractions are computed based on signed distances, using either geometrical intersections between cells of the unstructured mesh and a sub-set of the surface mesh that represents the interface, or using a polynomial approximation and adaptive mesh refinement. Although primarily developed for multiphase flow simulations, the proposed algorithm can potentially be used for other problems that require a phase-indicator: inside/outside information with respect to an arbitrarily shaped surface on arbitrarily unstructured meshes.

physics.comp-ph↗

arXiv2020

SAAMPLE: A Segregated Accuracy-driven Algorithm for Multiphase Pressure-Linked Equations

Existing hybrid Level Set / Front Tracking methods have been developed for structured meshes and successfully used for efficient and accurate simulations of complex multiphase flows. This contribution extends the capability of hybrid Level Set / Front Tracking methods towards handling surface tension driven multiphase flows using unstructured meshes. Unstructured meshes are traditionally used in Computational Fluid Dynamics to handle geometrically complex problems. In order to simulate surface-tension driven multiphase flows on unstructured meshes, a new SAAMPLE Segregated Accuracy-driven Algorithm for Multiphase Pressure-Linked Equations is proposed, that increases the robustness of the unstructured Level Set / Front Tracking (LENT) method. The LENT method is implemented in the Open- FOAM open source code for Computational Fluid Dynamics.

physics.comp-ph↗