arXiv subjects

Todor Stefanov

Publications and source records attributed to Todor Stefanov.

12 recordsLinked to original sources

arXiv2026

Vib2ECG: A Paired Chest-Lead SCG-ECG Dataset and Benchmark for ECG Reconstruction

Twelve-lead electrocardiography (ECG) is essential for cardiovascular diagnosis, but its long-term acquisition in daily life is constrained by complex and costly hardware. Recent efforts have explored reconstructing ECG from low-cost cardiac vibrational signals such as seismocardiography (SCG), however, due to the lack of a dataset, current methods are limited to limb leads, while clinical diagnosis requires multi-lead ECG, including chest leads. In this work, we propose Vib2ECG, the first paired, multi-channel electro-mechanical cardiac signal dataset, which includes complete twelve-lead ECGs and vibrational signals acquired by inertial measurement units (IMUs) at six chest-lead positions from 17 subjects. Based on this dataset, we also provide a benchmark. Experimental results demonstrate the feasibility of reconstructing electrical cardiac signals at variable locations from vibrational signals using a lightweight 364 K-parameter U-Net. Furthermore, we observe a hallucination phenomenon in the model, where ECG waveforms are generated in regions where no corresponding electrical activity is present. We analyze the causes of this phenomenon and propose potential directions for mitigation. This study demonstrates the feasibility of mobile-device-friendly ECG monitoring through chest-lead ECG prediction from low-cost vibrational signals acquired using IMU sensors. It expands the application of cardiac vibrational signals and provides new insights into the spatial relationship between cardiac electrical and mechanical activities with spatial location variation.

cs.LG↗

arXiv2025

P2W: From Power Traces to Weights Matrix -- An Unconventional Transfer Learning Approach

The rapid growth of deploying machine learning (ML) models within embedded systems on a chip (SoCs) has led to transformative shifts in fields like healthcare and autonomous vehicles. One of the primary challenges for training such embedded ML models is the lack of publicly available high-quality training data. Transfer learning approaches address this challenge by utilizing the knowledge encapsulated in an existing ML model as a starting point for training a new ML model. However, existing transfer learning approaches require direct access to the existing model which is not always feasible, especially for ML models deployed on embedded SoCs. Therefore, in this paper, we introduce a novel unconventional transfer learning approach to train a new ML model by extracting and using weights from an existing ML model running on an embedded SoC without having access to the model within the SoC. Our approach captures power consumption measurements from the SoC while it is executing the ML model and translates them to an approximated weights matrix used to initialize the new ML model. This improves the learning efficiency and predictive performance of the new model, especially in scenarios with limited data available to train the model. Our novel approach can effectively increase the accuracy of the new ML model up to 3 times compared to classical training methods using the same amount of limited training data.

cs.LG↗

arXiv2024

SlimSeiz: Efficient Channel-Adaptive Seizure Prediction Using a Mamba-Enhanced Network

Epileptic seizures cause abnormal brain activity, and their unpredictability can lead to accidents, underscoring the need for long-term seizure prediction. Although seizures can be predicted by analyzing electroencephalogram (EEG) signals, existing methods often require too many electrode channels or larger models, limiting mobile usability. This paper introduces a SlimSeiz framework that utilizes adaptive channel selection with a lightweight neural network model. SlimSeiz operates in two states: the first stage selects the optimal channel set for seizure prediction using machine learning algorithms, and the second stage employs a lightweight neural network based on convolution and Mamba for prediction. On the Children's Hospital Boston-MIT (CHB-MIT) EEG dataset, SlimSeiz can reduce channels from 22 to 8 while achieving a satisfactory result of 94.8% accuracy, 95.5% sensitivity, and 94.0% specificity with only 21.2K model parameters, matching or outperforming larger models' performance. We also validate SlimSeiz on a new EEG dataset, SRH-LEI, collected from Shanghai Renji Hospital, demonstrating its effectiveness across different patients. The code and SRH-LEI dataset are available at https://github.com/guoruilu/SlimSeiz.

cs.CV↗

arXiv2022

The Effects of Partitioning Strategies on Energy Consumption in Distributed CNN Inference at The Edge

Nowadays, many AI applications utilizing resource-constrained edge devices (e.g., small mobile robots, tiny IoT devices, etc.) require Convolutional Neural Network (CNN) inference on a distributed system at the edge due to limited resources of a single edge device to accommodate and execute a large CNN. There are four main partitioning strategies that can be utilized to partition a large CNN model and perform distributed CNN inference on multiple devices at the edge. However, to the best of our knowledge, no research has been conducted to investigate how these four partitioning strategies affect the energy consumption per edge device. Such an investigation is important because it will reveal the potential of these partitioning strategies to be used effectively for reduction of the per-device energy consumption when a large CNN model is deployed for distributed inference at the edge. Therefore, in this paper, we investigate and compare the per-device energy consumption of CNN model inference at the edge on a distributed system when the four partitioning strategies are utilized. The goal of our investigation and comparison is to find out which partitioning strategies (and under what conditions) have the highest potential to decrease the energy consumption per edge device when CNN inference is performed at the edge on a distributed system.

cs.AI↗

arXiv2022

AutoDiCE: Fully Automated Distributed CNN Inference at the Edge

Deep Learning approaches based on Convolutional Neural Networks (CNNs) are extensively utilized and very successful in a wide range of application areas, including image classification and speech recognition. For the execution of trained CNNs, i.e. model inference, we nowadays witness a shift from the Cloud to the Edge. Unfortunately, deploying and inferring large, compute and memory intensive CNNs on edge devices is challenging because these devices typically have limited power budgets and compute/memory resources. One approach to address this challenge is to leverage all available resources across multiple edge devices to deploy and execute a large CNN by properly partitioning the CNN and running each CNN partition on a separate edge device. Although such distribution, deployment, and execution of large CNNs on multiple edge devices is a desirable and beneficial approach, there currently does not exist a design and programming framework that takes a trained CNN model, together with a CNN partitioning specification, and fully automates the CNN model splitting and deployment on multiple edge devices to facilitate distributed CNN inference at the Edge. Therefore, in this paper, we propose a novel framework, called AutoDiCE, for automated splitting of a CNN model into a set of sub-models and automated code generation for distributed and collaborative execution of these sub-models on multiple, possibly heterogeneous, edge devices, while supporting the exploitation of parallelism among and within the edge devices. Our experimental results show that AutoDiCE can deliver distributed CNN inference with reduced energy consumption and memory usage per edge device, and improved overall system throughput at the same time.

cs.DC↗

arXiv2019

Fault-Tolerant Nanosatellite Computing on a Budget

Micro- and nanosatellites have become popular platforms for a variety of commercial and scientific applications, but today are considered suitable mainly for short and low-priority space missions due to their low reliability. In part, this can be attributed to their reliance upon cheap, low-feature size, COTS components originally designed for embedded and mobile-market applications, for which traditional hardware-voting concepts are ineffective. Software-fault-tolerance concepts have been shown effective for such systems, but have largely been ignored by the space industry due to low maturity, as most have only been researched in theory. In practice, designers of payload instruments and miniaturized satellites are usually forced to sacrifice reliability in favor deliver the level of performance necessary for cutting-edge science and innovative commercial applications. Thus, we developed a software-fault-tolerance-approach based upon thread-level coarse-grain lockstep, which was validated using fault-injection. To offer strong long-term fault coverage, our architecture is implemented as tiled MPSoC on an FPGA, utilizing partial reconfiguration, as well as mixed criticality. This architecture can satisfy the high performance requirements of current and future scientific and commercial space missions at very low cost, while offering the strong fault-coverage guarantees necessary for platform control even for missions with a long duration. This architecture was developed for a 4-year ESA project. Together with two industrial partners, we are developing a prototype to then undergo radiation testing.

cs.AR↗

arXiv2019

Dynamic Fault Tolerance Through Resource Pooling

Miniaturized satellites are currently not considered suitable for critical, high-priority, and complex multi-phased missions, due to their low reliability. As hardware-side fault tolerance (FT) solutions designed for larger spacecraft can not be adopted aboard very small satellites due to budget, energy, and size constraints, we developed a hybrid FT-approach based upon only COTS components, commodity processor cores, library IP, and standard software. This approach facilitates fault detection, isolation, and recovery in software, and utilizes fault-coverage techniques across the embedded stack within an multiprocessor system-on-chip (MPSoC). This allows our FPGA-based proof-of-concept implementation to deliver strong fault-coverage even for missions with a long duration, but also to adapt to varying performance requirements during the mission. The operator of a spacecraft utilizing this approach can define performance profiles, which allow an on-board computer (OBC) to trade between processing capacity, fault coverage, and energy consumption using simple heuristics. The software-side FT approach developed also offers advantages if deployed aboard larger spacecraft through spare resource pooling, enabling an OBC to more efficiently handle permanent faults. This FT approach in part mimics a critical biological systems's way of tolerating and adjusting to failures, enabling graceful ageing of an MPSoC.

cs.DC↗

arXiv2018

Modeling, Analysis, and Hard Real-time Scheduling of Adaptive Streaming Applications

In real-time systems, the application's behavior has to be predictable at compile-time to guarantee timing constraints. However, modern streaming applications which exhibit adaptive behavior due to mode switching at run-time, may degrade system predictability due to unknown behavior of the application during mode transitions. Therefore, proper temporal analysis during mode transitions is imperative to preserve system predictability. To this end, in this paper, we initially introduce Mode Aware Data Flow (MADF) which is our new predictable Model of Computation (MoC) to efficiently capture the behavior of adaptive streaming applications. Then, as an important part of the operational semantics of MADF, we propose the Maximum-Overlap Offset (MOO) which is our novel protocol for mode transitions. The main advantage of this transition protocol is that, in contrast to self-timed transition protocols, it avoids timing interference between modes upon mode transitions. As a result, any mode transition can be analyzed independently from the mode transitions that occurred in the past. Based on this transition protocol, we propose a hard real-time analysis as well to guarantee timing constraints by avoiding processor overloading during mode transitions. Therefore, using this protocol, we can derive a lower bound and an upper bound on the earliest starting time of the tasks in the new mode during mode transitions in such a way that hard real-time constraints are respected.

cs.DC↗

arXiv2017

Utilization-Based Scheduling of Flexible Mixed-Criticality Real-Time Tasks

Mixed-criticality models are an emerging paradigm for the design of real-time systems because of their significantly improved resource efficiency. However, formal mixed-criticality models have traditionally been characterized by two impractical assumptions: once \textit{any} high-criticality task overruns, \textit{all} low-criticality tasks are suspended and \textit{all other} high-criticality tasks are assumed to exhibit high-criticality behaviors at the same time. In this paper, we propose a more realistic mixed-criticality model, called the flexible mixed-criticality (FMC) model, in which these two issues are addressed in a combined manner. In this new model, only the overrun task itself is assumed to exhibit high-criticality behavior, while other high-criticality tasks remain in the same mode as before. The guaranteed service levels of low-criticality tasks are gracefully degraded with the overruns of high-criticality tasks. We derive a utilization-based technique to analyze the schedulability of this new mixed-criticality model under EDF-VD scheduling. During runtime, the proposed test condition serves an important criterion for dynamic service level tuning, by means of which the maximum available execution budget for low-criticality tasks can be directly determined with minimal overhead while guaranteeing mixed-criticality schedulability. Experiments demonstrate the effectiveness of the FMC scheme compared with state-of-the-art techniques.

cs.DC↗

arXiv2017

Bringing Fault-Tolerant GigaHertz-Computing to Space: A Multi-Stage Software-Side Fault-Tolerance Approach for Miniaturized Spacecraft

Modern embedded technology is a driving factor in satellite miniaturization, contributing to a massive boom in satellite launches and a rapidly evolving new space industry. Miniaturized satellites, however, suffer from low reliability, as traditional hardware-based fault-tolerance (FT) concepts are ineffective for on-board computers (OBCs) utilizing modern systems-on-a-chip (SoC). Therefore, larger satellites continue to rely on proven processors with large feature sizes. Software-based concepts have largely been ignored by the space industry as they were researched only in theory, and have not yet reached the level of maturity necessary for implementation. We present the first integral, real-world solution to enable fault-tolerant general-purpose computing with modern multiprocessor-SoCs (MPSoCs) for spaceflight, thereby enabling their use in future high-priority space missions. The presented multi-stage approach consists of three FT stages, combining coarse-grained thread-level distributed self-validation, FPGA reconfiguration, and mixed criticality to assure long-term FT and excellent scalability for both resource constrained and critical high-priority space missions. Early benchmark results indicate a drastic performance increase over state-of-the-art radiation-hard OBC designs and considerably lower software- and hardware development costs. This approach was developed for a 4-year European Space Agency (ESA) project, and we are implementing a tiled MPSoC prototype jointly with two industrial partners.

cs.DC↗

arXiv2017

Preliminary Performance Estimations and Benchmark Results for a Software-based Fault-Tolerance Approach aboard Miniaturized Satellite Computers

Modern embedded technology is a driving factor in satellite miniaturization, contributing to a massive boom in satellite launches and a rapidly evolving new space industry. Miniaturized satellites however suffer from low reliability, as traditional hardware-based fault-tolerance (FT) concepts are ineffective for on-board computers (OBCs) utilizing modern systems-on-a-chip (SoC). Larger satellites therefore continue to rely on proven processors with large feature sizes. Software-based concepts have largely been ignored by the space industry as they were researched only in theory, and have not yet reached the level of maturity necessary for implementation. In related work, we presented the first integral, real-world solution to enable fault-tolerant general-purpose computing with modern multiprocessor-SoCs (MPSoCs) for spaceflight, thereby enabling their use in future high-priority space missions. The presented multi-stage approach consists of three FT stages, combining coarse-grained thread-level distributed self-validation, FPGA reconfiguration, and mixed criticality to assure long-term FT and excellent scalability for both resource constrained and critical high-priority space missions. As part of the ongoing implementation effort towards a hardware prototype, several software implementations were achieved and tested. This document contains an outline of the conducted tests, performance evaluation results, and supplementary information not included in the actual paper. It is being continuously expanded and updated.

cs.DC↗

arXiv2016

EDF-VD Scheduling of Mixed-Criticality Systems with Degraded Quality Guarantees

This paper studies real-time scheduling of mixed-criticality systems where low-criticality tasks are still guaranteed some service in the high-criticality mode, with reduced execution budgets. First, we present a utilization-based schedulability test for such systems under EDF-VD scheduling. Second, we quantify the suboptimality of EDF-VD (with our test condition) in terms of speedup factors. In general, the speedup factor is a function with respect to the ratio between the amount of resource required by different types of tasks in different criticality modes, and reaches 4/3 in the worst case. Furthermore, we show that the proposed utilization-based schedulability test and speedup factor results apply to the elastic mixed-criticality model as well. Experiments show effectiveness of our proposed method and confirm the theoretical suboptimality results.

cs.OH↗