arXiv subjects

Tom Lee

Publications and source records attributed to Tom Lee.

6 recordsLinked to original sources

arXiv2025

Beyond Static Scoring: Enhancing Assessment Validity via AI-Generated Interactive Verification

Large Language Models (LLMs) challenge the validity of traditional open-ended assessments by blurring the lines of authorship. While recent research has focused on the accuracy of automated scoring (AES), these static approaches fail to capture process evidence or verify genuine student understanding. This paper introduces a novel Human-AI Collaboration framework that enhances assessment integrity by combining rubric-based automated scoring with AI-generated, targeted follow-up questions. In a pilot study with university instructors (N=9), we demonstrate that while Stage 1 (Auto-Scoring) ensures procedural fairness and consistency, Stage 2 (Interactive Verification) is essential for construct validity, effectively diagnosing superficial reasoning or unverified AI use. We report on the systems design, instructor perceptions of fairness versus validity, and the necessity of adaptive difficulty in follow-up questioning. The findings offer a scalable pathway for authentic assessment that moves beyond policing AI to integrating it as a synergistic partner in the evaluation process.

cs.CY↗

arXiv2025

Silicon Wafer Fracture Stress for Tracking Sensors in Particle Physics Experiments

For the construction of the ATLAS Inner Tracker strip detector, silicon strip sensor modules are glued directly onto carbon fibre support structures using a soft silicone gel. During tests at temperatures below \unit[-35]{$^{\circ}$C}, several of the sensors were found to crack due to a mismatch in coefficients of thermal expansion between polyimide circuit boards with copper metal layers (glued onto the sensor) and the silicon sensor itself. While module assembly procedures were developed to minimise variations between modules, cold tests showed a wide range of temperatures at which supposedly comparable modules failed. The observed variance (fracture temperatures between \unit[-35]{\textcelsius} and \unit[-70]{\textcelsius}) for supposedly comparable modules suggests an undetected variation between modules suspected to be intrinsic to the silicon wafer itself. Therefore, a test programme was developed to investigate the fracture stress of representative sensor wafer cutoffs. This paper presents results for the fracture stress of silicon sensors used in detector modules.

physics.ins-det↗

arXiv2022

Compositionally Complex Perovskite Oxides as a New Class of Li-Ion Solid Electrolytes

Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Using oxide solid electrolytes for all-solid-state batteries as an exemplar, we validate these new strategies via discovering a new class of compositionally complex perovskite oxides (CCPOs) to show the possibility of improving ionic conductivities beyond the limit of conventional doping. As an example (amongst the 28 CCPOs examined), we demonstrate that the ionic conductivity can be improved by >60% in (Li0.375Sr0.4375)(Ta0.375Nb0.375Zr0.125Hf0.125)O3-{\delta}, in comparison with the state-of-art (Li0.375Sr0.4375)(Ta0.75Zr0.25)O3-{\delta} (LSTZ) baseline, via maintaining comparable electrochemical stability. Furthermore, the ionic conductivity can be improved by another >70% via grain boundary (GB) engineering, achieving >270% of the LSTZ baseline. This work suggests transformative new strategies for designing and tailoring HECs and CCCs, thereby opening a new window for discovering materials for energy storage and many other applications.

cond-mat.mtrl-sci↗

arXiv2022

Atomic-scale origin of the low grain-boundary resistance in perovskite solid electrolytes

Oxide solid electrolytes (OSEs) have the potential to achieve improved safety and energy density for lithium-ion batteries, but their high grain-boundary (GB) resistance is a general bottleneck. In the most well studied perovskite OSE, Li3xLa2/3-xTiO3 (LLTO), the ionic conductivity of GBs is about three orders of magnitude lower than that of the bulk. In contrast, the related Li0.375Sr0.4375Ta0.75Zr0.25O3 (LSTZ0.75) perovskite exhibits low GB resistance for reasons yet unknown. Here, we used aberration-corrected scanning transmission electron microscopy and spectroscopy, along with an active learning moment tensor potential, to reveal the atomic scale structure and composition of LSTZ0.75 GBs. Vibrational electron energy loss spectroscopy is applied for the first time to characterize the otherwise unmeasurable Li distribution in GBs of LSTZ0.75. We found that Li depletion, which is a major reason for the low GB ionic conductivity of LLTO, is absent for the GBs of LSTZ0.75. Instead, the low GB resistivity of LSTZ0.75 is attributed to the formation of a unique defective cubic perovskite interfacial structure that contained abundant vacancies. Our study provides insights into the atomic scale mechanisms of low GB resistivity and sheds light on possible paths for designing OSEs with high total ionic conductivity.

cond-mat.mtrl-sci↗

arXiv2020

Analyses of residual accelerations for TianQin based on the global MHD simulation

TianQin is a proposed space-based gravitational wave observatory. It is designed to detect the gravitational wave signals in the frequency range of 0.1 mHz -- 1 Hz. At a geocentric distance of $10^5$ km, the plasma in the earth magnetosphere will contribute as the main source of environmental noises. Here, we analyze the acceleration noises that are caused by the magnetic field of space plasma for the test mass of TianQin. The real solar wind data observed by the Advanced Composition Explorer are taken as the input of the magnetohydrodynamic simulation. The Space Weather Modeling Framework is used to simulate the global magnetosphere of the earth, from which we obtain the plasma and magnetic field parameters on the detector's orbits. We calculate the time series of the residual accelerations and the corresponding amplitude spectral densities on these orbit configurations. We find that the residual acceleration produced by the interaction between the TM's magnetic moment induced by the space magnetic field and the spacecraft magnetic field ($\bm{a}_{\rm M1}$) is the dominant term, which can approach $10^{-15}$ m/s$^2$/Hz$^{1/2}$ at $f \approx$ 0.2 mHz for the nominal values of the magnetic susceptibility ($\chi_{\rm m} = 10^{-5}$) and the magnetic shielding factor ($\xi_{\rm m} = 10$) of the test mass. The ratios between the amplitude spectral density of the acceleration noise caused by the space magnetic field and the preliminary goal of the inertial sensor are 0.38 and 0.08 at 1 mHz and 10 mHz, respectively. We discuss the further reduction of this acceleration noise by decreasing $\chi_{\rm m}$ and/or increasing $\xi_{\rm m}$ in the future instrumentation development for TianQin.

astro-ph.IM↗

arXiv2015

A Framework for Symmetric Part Detection in Cluttered Scenes

The role of symmetry in computer vision has waxed and waned in importance during the evolution of the field from its earliest days. At first figuring prominently in support of bottom-up indexing, it fell out of favor as shape gave way to appearance and recognition gave way to detection. With a strong prior in the form of a target object, the role of the weaker priors offered by perceptual grouping was greatly diminished. However, as the field returns to the problem of recognition from a large database, the bottom-up recovery of the parts that make up the objects in a cluttered scene is critical for their recognition. The medial axis community has long exploited the ubiquitous regularity of symmetry as a basis for the decomposition of a closed contour into medial parts. However, today's recognition systems are faced with cluttered scenes, and the assumption that a closed contour exists, i.e. that figure-ground segmentation has been solved, renders much of the medial axis community's work inapplicable. In this article, we review a computational framework, previously reported in Lee et al. (2013), Levinshtein et al. (2009, 2013), that bridges the representation power of the medial axis and the need to recover and group an object's parts in a cluttered scene. Our framework is rooted in the idea that a maximally inscribed disc, the building block of a medial axis, can be modeled as a compact superpixel in the image. We evaluate the method on images of cluttered scenes.

cs.CV↗